+.c.o:
+ $(COMPILE) -c $<
+
+# FIXME: We should only use cygpath when building on Windows,
+# and only if it is available.
+.c.obj:
+ $(COMPILE) -c `cygpath -w $<`
+
+.s.o:
+ $(COMPILE) -c $<
+
+.S.o:
+ $(COMPILE) -c $<
+
+mostlyclean-compile:
+ -rm -f *.o core *.core
+ -rm -f *.$(OBJEXT)
+
+clean-compile:
+
+distclean-compile:
+ -rm -f *.tab.c
+
+maintainer-clean-compile:
+
+.c.lo:
+ $(LIBTOOL) --mode=compile $(COMPILE) -c $<
+
+.s.lo:
+ $(LIBTOOL) --mode=compile $(COMPILE) -c $<
+
+.S.lo:
+ $(LIBTOOL) --mode=compile $(COMPILE) -c $<
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+
+distclean-libtool:
+
+maintainer-clean-libtool:
+
+mostlyclean-bfdlibLTLIBRARIES:
+
+clean-bfdlibLTLIBRARIES:
+ -test -z "$(bfdlib_LTLIBRARIES)" || rm -f $(bfdlib_LTLIBRARIES)
+
+distclean-bfdlibLTLIBRARIES:
+
+maintainer-clean-bfdlibLTLIBRARIES:
+
+libbfd.la: $(libbfd_la_OBJECTS) $(libbfd_la_DEPENDENCIES)
+ $(LINK) -rpath $(bfdlibdir) $(libbfd_la_LDFLAGS) $(libbfd_la_OBJECTS) $(libbfd_la_LIBADD) $(LIBS)
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+
+@SET_MAKE@
+
+all-recursive install-data-recursive install-exec-recursive \
+installdirs-recursive install-recursive uninstall-recursive install-info-recursive \
+check-recursive installcheck-recursive info-recursive dvi-recursive:
+ @set fnord $(MAKEFLAGS); amf=$$2; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @set fnord $(MAKEFLAGS); amf=$$2; \
+ dot_seen=no; \
+ rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
+ rev="$$subdir $$rev"; \
+ test "$$subdir" != "." || dot_seen=yes; \
+ done; \
+ test "$$dot_seen" = "no" && rev=". $$rev"; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+ done
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS)'; \
+ unique=`for i in $$list; do echo $$i; done | \
+ awk ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ here=`pwd` && cd $(srcdir) \
+ && mkid -f$$here/ID $$unique $(LISP)
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) config.in $(TAGS_DEPENDENCIES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS)'; \
+ unique=`for i in $$list; do echo $$i; done | \
+ awk ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(ETAGS_ARGS)config.in$$unique$(LISP)$$tags" \
+ || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags config.in $$unique $(LISP) -o $$here/TAGS)
+
+mostlyclean-tags:
+
+clean-tags:
+
+distclean-tags:
+ -rm -f TAGS ID
+
+maintainer-clean-tags:
+
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+
+# This target untars the dist file and tries a VPATH configuration. Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+ -rm -rf $(distdir)
+ GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
+ mkdir $(distdir)/=build
+ mkdir $(distdir)/=inst
+ dc_install_base=`cd $(distdir)/=inst && pwd`; \
+ cd $(distdir)/=build \
+ && ../configure --srcdir=.. --prefix=$$dc_install_base \
+ && $(MAKE) $(AM_MAKEFLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) dvi \
+ && $(MAKE) $(AM_MAKEFLAGS) check \
+ && $(MAKE) $(AM_MAKEFLAGS) install \
+ && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+ && $(MAKE) $(AM_MAKEFLAGS) dist
+ -rm -rf $(distdir)
+ @banner="$(distdir).tar.gz is ready for distribution"; \
+ dashes=`echo "$$banner" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ echo "$$dashes"
+dist: distdir
+ -chmod -R a+r $(distdir)
+ GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
+ -rm -rf $(distdir)
+dist-all: distdir
+ -chmod -R a+r $(distdir)
+ GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
+ -rm -rf $(distdir)
+distdir: $(DISTFILES)
+ -rm -rf $(distdir)
+ mkdir $(distdir)
+ -chmod 777 $(distdir)
+ @for file in $(DISTFILES); do \
+ if test -f $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ cp -pr $$d/$$file $(distdir)/$$file; \
+ else \
+ test -f $(distdir)/$$file \
+ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+ || cp -p $$d/$$file $(distdir)/$$file || :; \
+ fi; \
+ done
+ for subdir in $(SUBDIRS); do \
+ if test "$$subdir" = .; then :; else \
+ test -d $(distdir)/$$subdir \
+ || mkdir $(distdir)/$$subdir \
+ || exit 1; \
+ chmod 777 $(distdir)/$$subdir; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
+ || exit 1; \
+ fi; \
+ done
+info-am:
+info: info-recursive
+dvi-am:
+dvi: dvi-recursive
+check-am:
+check: check-recursive
+installcheck-am:
+installcheck: installcheck-recursive
+install-info-am:
+install-info: install-info-recursive
+all-recursive-am: config.h
+ $(MAKE) $(AM_MAKEFLAGS) all-recursive
+
+install-exec-am:
+install-exec: install-exec-recursive
+
+install-data-am: install-bfdlibLTLIBRARIES
+install-data: install-data-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+install: install-recursive
+uninstall-am: uninstall-bfdlibLTLIBRARIES
+uninstall: uninstall-recursive
+all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) config.h
+all-redirect: all-recursive-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
+installdirs: installdirs-recursive
+installdirs-am:
+ $(mkinstalldirs) $(DESTDIR)$(bfdlibdir)
+
+
+mostlyclean-generic:
+ -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
+
+clean-generic:
+ -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+ -rm -f Makefile $(CONFIG_CLEAN_FILES)
+ -rm -f config.cache config.log stamp-h stamp-h[0-9]*
+ -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
+
+maintainer-clean-generic:
+mostlyclean-am: mostlyclean-hdr mostlyclean-noinstLIBRARIES \
+ mostlyclean-compile mostlyclean-libtool \
+ mostlyclean-bfdlibLTLIBRARIES mostlyclean-tags \
+ mostlyclean-generic
+
+mostlyclean: mostlyclean-recursive
+
+clean-am: clean-hdr clean-noinstLIBRARIES clean-compile clean-libtool \
+ clean-bfdlibLTLIBRARIES clean-tags clean-generic \
+ mostlyclean-am
+
+clean: clean-recursive
+
+distclean-am: distclean-hdr distclean-noinstLIBRARIES distclean-compile \
+ distclean-libtool distclean-bfdlibLTLIBRARIES \
+ distclean-tags distclean-generic clean-am
+ -rm -f libtool
+
+distclean: distclean-recursive
+ -rm -f config.status
+
+maintainer-clean-am: maintainer-clean-hdr \
+ maintainer-clean-noinstLIBRARIES \
+ maintainer-clean-compile maintainer-clean-libtool \
+ maintainer-clean-bfdlibLTLIBRARIES \
+ maintainer-clean-tags maintainer-clean-generic \
+ distclean-am
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f config.status
+
+.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \
+mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
+clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
+mostlyclean-compile distclean-compile clean-compile \
+maintainer-clean-compile mostlyclean-libtool distclean-libtool \
+clean-libtool maintainer-clean-libtool mostlyclean-bfdlibLTLIBRARIES \
+distclean-bfdlibLTLIBRARIES clean-bfdlibLTLIBRARIES \
+maintainer-clean-bfdlibLTLIBRARIES uninstall-bfdlibLTLIBRARIES \
+install-bfdlibLTLIBRARIES install-data-recursive \
+uninstall-data-recursive install-exec-recursive \
+uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \
+all-recursive check-recursive installcheck-recursive info-recursive \
+dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \
+maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
+distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
+dvi-am dvi check check-am installcheck-am installcheck install-info-am \
+install-info all-recursive-am install-exec-am install-exec \
+install-data-am install-data install-am install uninstall-am uninstall \
+all-redirect all-am all installdirs-am installdirs mostlyclean-generic \
+distclean-generic clean-generic maintainer-clean-generic clean \
+mostlyclean distclean maintainer-clean
+
+
+po/SRC-POTFILES.in: @MAINT@ Makefile $(SRC_POTFILES)
+ for file in $(SRC_POTFILES); do echo $$file; done | sort > tmp.src \
+ && mv tmp.src $(srcdir)/po/SRC-POTFILES.in
+
+po/BLD-POTFILES.in: @MAINT@ Makefile $(BLD_POTFILES)
+ for file in $(BLD_POTFILES); do echo $$file; done | sort > tmp.bld \
+ && mv tmp.bld $(srcdir)/po/BLD-POTFILES.in
+
+# The following target is retained for upgrade purposes.
+# This target used to exist in older versions of this makefile, and was
+# referenced by <builddir>/po/Makefile (which is created from <srcdir>/po/Make-in)
+# So old versions of <builddir>/po/Makefile will try to regenerate themselves
+# when make is next run, but that dependency cannot be completed without a build
+# of po/POTFILES.in. Hence the presence of this rule. This rule will be deleted
+# once it is no longer needed - probably in the fall of 2001.
+po/POTFILES.in:
+
+diststuff: info
+
+stamp-ofiles: Makefile
+ rm -f tofiles