- Copyright (C) 1999 Free Software Foundation, Inc.
+ Copyright 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
final_link routine once. */
extern boolean mcore_bfd_coff_final_link
PARAMS ((bfd *, struct bfd_link_info *));
final_link routine once. */
extern boolean mcore_bfd_coff_final_link
PARAMS ((bfd *, struct bfd_link_info *));
PARAMS ((bfd *, arelent *, asymbol *, PTR, asection *, bfd *, char **));
static boolean coff_mcore_relocate_section
PARAMS ((bfd *, struct bfd_link_info *, bfd *, asection *, bfd_byte *,
PARAMS ((bfd *, arelent *, asymbol *, PTR, asection *, bfd *, char **));
static boolean coff_mcore_relocate_section
PARAMS ((bfd *, struct bfd_link_info *, bfd *, asection *, bfd_byte *,
static reloc_howto_type * coff_mcore_rtype_to_howto
PARAMS ((bfd *, asection *, struct internal_reloc *,
struct coff_link_hash_entry *, struct internal_syment *, bfd_vma *));
static reloc_howto_type * coff_mcore_rtype_to_howto
PARAMS ((bfd *, asection *, struct internal_reloc *,
struct coff_link_hash_entry *, struct internal_syment *, bfd_vma *));
+static void mcore_emit_base_file_entry
+ PARAMS ((struct bfd_link_info *, bfd *, asection *, bfd_vma));
+static boolean in_reloc_p PARAMS ((bfd *, reloc_howto_type *));
\f
/* The NT loader points the toc register to &toc + 32768, in order to
use the complete range of a 16-bit displacement. We have to adjust
\f
/* The NT loader points the toc register to &toc + 32768, in order to
use the complete range of a 16-bit displacement. We have to adjust
/* In case we're on a 32-bit machine, construct a 64-bit "-1" value
from smaller values. Start with zero, widen, *then* decrement. */
#define MINUS_ONE (((bfd_vma)0) - 1)
/* In case we're on a 32-bit machine, construct a 64-bit "-1" value
from smaller values. Start with zero, widen, *then* decrement. */
#define MINUS_ONE (((bfd_vma)0) - 1)
- HOWTO (IMAGE_REL_MCORE_ABSOLUTE,/* type */
- 0, /* rightshift */
- 0, /* size (0 = byte, 1 = short, 2 = long) */
- 0, /* bitsize */
- false, /* pc_relative */
- 0, /* bitpos */
+ HOWTO (IMAGE_REL_MCORE_ABSOLUTE,/* type */
+ 0, /* rightshift */
+ 0, /* size (0 = byte, 1 = short, 2 = long) */
+ 0, /* bitsize */
+ false, /* pc_relative */
+ 0, /* bitpos */
- 0, /* rightshift */
- 2, /* size (0 = byte, 1 = short, 2 = long) */
- 32, /* bitsize */
- false, /* pc_relative */
- 0, /* bitpos */
+ 0, /* rightshift */
+ 2, /* size (0 = byte, 1 = short, 2 = long) */
+ 32, /* bitsize */
+ false, /* pc_relative */
+ 0, /* bitpos */
- true, /* partial_inplace */
- 0xffffffff, /* src_mask */
- 0xffffffff, /* dst_mask */
+ true, /* partial_inplace */
+ 0xffffffff, /* src_mask */
+ 0xffffffff, /* dst_mask */
HOWTO (IMAGE_REL_MCORE_PCREL_IMM8BY4, /* type */
2, /* rightshift */
1, /* size (0 = byte, 1 = short, 2 = long) */
HOWTO (IMAGE_REL_MCORE_PCREL_IMM8BY4, /* type */
2, /* rightshift */
1, /* size (0 = byte, 1 = short, 2 = long) */
Span 2k instructions == 4k bytes.
Only useful pieces at the relocated address are the opcode (5 bits) */
HOWTO (IMAGE_REL_MCORE_PCREL_IMM11BY2,/* type */
Span 2k instructions == 4k bytes.
Only useful pieces at the relocated address are the opcode (5 bits) */
HOWTO (IMAGE_REL_MCORE_PCREL_IMM11BY2,/* type */
HOWTO (IMAGE_REL_MCORE_PCREL_IMM4BY2, /* type */
1, /* rightshift */
1, /* size (0 = byte, 1 = short, 2 = long) */
HOWTO (IMAGE_REL_MCORE_PCREL_IMM4BY2, /* type */
1, /* rightshift */
1, /* size (0 = byte, 1 = short, 2 = long) */
HOWTO (IMAGE_REL_MCORE_PCREL_32,/* type */
0, /* rightshift */
2, /* size (0 = byte, 1 = short, 2 = long) */
HOWTO (IMAGE_REL_MCORE_PCREL_32,/* type */
0, /* rightshift */
2, /* size (0 = byte, 1 = short, 2 = long) */
/* Like PCREL_IMM11BY2, this relocation indicates that there is a
'jsri' at the specified address. There is a separate relocation
/* Like PCREL_IMM11BY2, this relocation indicates that there is a
'jsri' at the specified address. There is a separate relocation
might be able to change the jsri to a bsr if the target turns out
to be close enough [even though we won't reclaim the literal pool
entry, we'll get some runtime efficiency back]. Note that this
might be able to change the jsri to a bsr if the target turns out
to be close enough [even though we won't reclaim the literal pool
entry, we'll get some runtime efficiency back]. Note that this
HOWTO (IMAGE_REL_MCORE_PCREL_JSR_IMM11BY2,/* type */
1, /* rightshift */
1, /* size (0 = byte, 1 = short, 2 = long) */
HOWTO (IMAGE_REL_MCORE_PCREL_JSR_IMM11BY2,/* type */
1, /* rightshift */
1, /* size (0 = byte, 1 = short, 2 = long) */
HOWTO (IMAGE_REL_MCORE_RVA, /* type */
0, /* rightshift */
2, /* size (0 = byte, 1 = short, 2 = long) */
HOWTO (IMAGE_REL_MCORE_RVA, /* type */
0, /* rightshift */
2, /* size (0 = byte, 1 = short, 2 = long) */
if (ret == (mcore_hash_table *) NULL)
return NULL;
if (! _bfd_coff_link_hash_table_init
(& ret->root, abfd, _bfd_coff_link_hash_newfunc))
{
if (ret == (mcore_hash_table *) NULL)
return NULL;
if (! _bfd_coff_link_hash_table_init
(& ret->root, abfd, _bfd_coff_link_hash_newfunc))
{
static void
mcore_emit_base_file_entry (info, output_bfd, input_section, reloc_offset)
struct bfd_link_info * info;
static void
mcore_emit_base_file_entry (info, output_bfd, input_section, reloc_offset)
struct bfd_link_info * info;
fwrite (&addr, 1, sizeof (addr), (FILE *) info->base_file);
}
\f
fwrite (&addr, 1, sizeof (addr), (FILE *) info->base_file);
}
\f
static bfd_reloc_status_type
mcore_coff_unsupported_reloc (abfd, reloc_entry, symbol, data, input_section,
output_bfd, error_message)
static bfd_reloc_status_type
mcore_coff_unsupported_reloc (abfd, reloc_entry, symbol, data, input_section,
output_bfd, error_message)
reloc_entry->howto->name,
reloc_entry->howto->type);
reloc_entry->howto->name,
reloc_entry->howto->type);
#define HOW2MAP(bfd_rtype, mcore_rtype) \
case bfd_rtype: return & mcore_coff_howto_table [mcore_rtype]
#define HOW2MAP(bfd_rtype, mcore_rtype) \
case bfd_rtype: return & mcore_coff_howto_table [mcore_rtype]
HOW2MAP (BFD_RELOC_32, IMAGE_REL_MCORE_ADDR32);
HOW2MAP (BFD_RELOC_MCORE_PCREL_IMM8BY4, IMAGE_REL_MCORE_PCREL_IMM8BY4);
HOW2MAP (BFD_RELOC_MCORE_PCREL_IMM11BY2, IMAGE_REL_MCORE_PCREL_IMM11BY2);
HOW2MAP (BFD_RELOC_32, IMAGE_REL_MCORE_ADDR32);
HOW2MAP (BFD_RELOC_MCORE_PCREL_IMM8BY4, IMAGE_REL_MCORE_PCREL_IMM8BY4);
HOW2MAP (BFD_RELOC_MCORE_PCREL_IMM11BY2, IMAGE_REL_MCORE_PCREL_IMM11BY2);
HOW2MAP (BFD_RELOC_32_PCREL, IMAGE_REL_MCORE_PCREL_32);
HOW2MAP (BFD_RELOC_MCORE_PCREL_JSR_IMM11BY2, IMAGE_REL_MCORE_PCREL_JSR_IMM11BY2);
HOW2MAP (BFD_RELOC_RVA, IMAGE_REL_MCORE_RVA);
HOW2MAP (BFD_RELOC_32_PCREL, IMAGE_REL_MCORE_PCREL_32);
HOW2MAP (BFD_RELOC_MCORE_PCREL_JSR_IMM11BY2, IMAGE_REL_MCORE_PCREL_JSR_IMM11BY2);
HOW2MAP (BFD_RELOC_RVA, IMAGE_REL_MCORE_RVA);
howto = mcore_coff_howto_table + rel->r_type;
if (rel->r_type == IMAGE_REL_MCORE_RVA)
* addendp -= pe_data (sec->output_section->owner)->pe_opthdr.ImageBase;
howto = mcore_coff_howto_table + rel->r_type;
if (rel->r_type == IMAGE_REL_MCORE_RVA)
* addendp -= pe_data (sec->output_section->owner)->pe_opthdr.ImageBase;
/* If the symbol is defined, then the generic code is going to
add back the symbol value in order to cancel out an
adjustment it made to the addend. However, we set the addend
/* If the symbol is defined, then the generic code is going to
add back the symbol value in order to cancel out an
adjustment it made to the addend. However, we set the addend
return howto;
}
/* Return true if this relocation should appear in the output .reloc section.
This function is referenced in pe_mkobject in peicode.h. */
return howto;
}
/* Return true if this relocation should appear in the output .reloc section.
This function is referenced in pe_mkobject in peicode.h. */
static boolean
in_reloc_p (abfd, howto)
bfd * abfd ATTRIBUTE_UNUSED;
reloc_howto_type * howto;
{
return ! howto->pc_relative && howto->type != IMAGE_REL_MCORE_RVA;
static boolean
in_reloc_p (abfd, howto)
bfd * abfd ATTRIBUTE_UNUSED;
reloc_howto_type * howto;
{
return ! howto->pc_relative && howto->type != IMAGE_REL_MCORE_RVA;
/* If we are performing a relocateable link, we don't need to do a
thing. The caller will take care of adjusting the reloc
addresses and symbol indices. */
if (info->relocateable)
return true;
/* If we are performing a relocateable link, we don't need to do a
thing. The caller will take care of adjusting the reloc
addresses and symbol indices. */
if (info->relocateable)
return true;
/* Check if we have the same endianess */
if ( input_bfd->xvec->byteorder != output_bfd->xvec->byteorder
&& output_bfd->xvec->byteorder != BFD_ENDIAN_UNKNOWN)
{
(*_bfd_error_handler)
/* Check if we have the same endianess */
if ( input_bfd->xvec->byteorder != output_bfd->xvec->byteorder
&& output_bfd->xvec->byteorder != BFD_ENDIAN_UNKNOWN)
{
(*_bfd_error_handler)
- (_("%s: compiled for a %s endian system and target is %s endian.\n"),
- bfd_get_filename (input_bfd),
- bfd_big_endian (input_bfd) ? "big" : "little",
- bfd_big_endian (output_bfd) ? "big" : "little");
+ (_("%s: compiled for a %s system and target is %s.\n"),
+ bfd_archive_filename (input_bfd),
+ bfd_big_endian (input_bfd) ? _("big endian") : _("little endian"),
+ bfd_big_endian (output_bfd) ? _("big endian") : _("little endian"));
/* Get the howto and initialise the addend. */
howto = bfd_coff_rtype_to_howto (input_bfd, input_section, rel, h,
sym, & addend);
/* Get the howto and initialise the addend. */
howto = bfd_coff_rtype_to_howto (input_bfd, input_section, rel, h,
sym, & addend);
else if ( sym->_n._n_n._n_zeroes == 0
&& sym->_n._n_n._n_offset != 0)
my_name = obj_coff_strings (input_bfd) + sym->_n._n_n._n_offset;
else if ( sym->_n._n_n._n_zeroes == 0
&& sym->_n._n_n._n_offset != 0)
my_name = obj_coff_strings (input_bfd) + sym->_n._n_n._n_offset;
/* Each case must do its own relocation, setting rstat appropriately. */
switch (r_type)
{
default:
_bfd_error_handler (_("%s: unsupported relocation type 0x%02x"),
/* Each case must do its own relocation, setting rstat appropriately. */
switch (r_type)
{
default:
_bfd_error_handler (_("%s: unsupported relocation type 0x%02x"),
-
- fprintf (stderr,"sym %ld (%s), r_vaddr %ld (%lx)\n",
+
+ fprintf (stderr,"sym %ld (%s), r_vaddr %ld (%lx)\n",
rel->r_symndx, my_name, (long) rel->r_vaddr,
rel->r_symndx, my_name, (long) rel->r_vaddr,
case IMAGE_REL_MCORE_PCREL_IMM8BY4:
case IMAGE_REL_MCORE_PCREL_IMM11BY2:
case IMAGE_REL_MCORE_PCREL_IMM4BY2:
case IMAGE_REL_MCORE_PCREL_IMM8BY4:
case IMAGE_REL_MCORE_PCREL_IMM11BY2:
case IMAGE_REL_MCORE_PCREL_IMM4BY2:
/* XXX fixme - shouldn't this be like the code for the RVA reloc ? */
rstat = _bfd_relocate_contents (howto, input_bfd, val, loc);
break;
/* XXX fixme - shouldn't this be like the code for the RVA reloc ? */
rstat = _bfd_relocate_contents (howto, input_bfd, val, loc);
break;
if (info->base_file)
{
/* Emit a reloc if the backend thinks it needs it. */
if (sym && pe_data (output_bfd)->in_reloc_p (output_bfd, howto))
mcore_emit_base_file_entry (info, output_bfd, input_section, rel->r_vaddr);
}
if (info->base_file)
{
/* Emit a reloc if the backend thinks it needs it. */
if (sym && pe_data (output_bfd)->in_reloc_p (output_bfd, howto))
mcore_emit_base_file_entry (info, output_bfd, input_section, rel->r_vaddr);
}
- (info, my_name, howto->name,
+ (info, my_name, howto->name,
/* Forward declaration to initialise alterbative_target field. */
extern const bfd_target TARGET_LITTLE_SYM;
/* Forward declaration to initialise alterbative_target field. */
extern const bfd_target TARGET_LITTLE_SYM;
CREATE_BIG_COFF_TARGET_VEC (TARGET_BIG_SYM, TARGET_BIG_NAME, D_PAGED,
(SEC_CODE | SEC_DATA | SEC_DEBUGGING | SEC_READONLY | SEC_LINK_ONCE | SEC_LINK_DUPLICATES),
0, & TARGET_LITTLE_SYM)
CREATE_BIG_COFF_TARGET_VEC (TARGET_BIG_SYM, TARGET_BIG_NAME, D_PAGED,
(SEC_CODE | SEC_DATA | SEC_DEBUGGING | SEC_READONLY | SEC_LINK_ONCE | SEC_LINK_DUPLICATES),
0, & TARGET_LITTLE_SYM)