- if [ "${target_makefile_frag}" != "" ] ; then
- echo target_makefile_frag = ${invsubdir}${target_makefile_frag} >>${Makefile}
- fi
- if [ "${host_makefile_frag}" != "" ] ; then
- echo host_makefile_frag = ${invsubdir}${host_makefile_frag} >>${Makefile}
- fi
- if [ "${site_makefile_frag}" != "" ] ; then
- echo site_makefile_frag = ${invsubdir}${site_makefile_frag} >>${Makefile}
- fi
-
- # fixme: this shouldn't be in configure.
- # Define macro CROSS_COMPILE in compilation if this is a cross-compiler.
- case "${host_alias}" in
- "${target_alias}")
- tooldir='$(libdir)'
- echo "ALL=all.internal" >> ${Makefile}
- ;;
- *)
- echo "CROSS=-DCROSS_COMPILE" >> ${Makefile}
- echo "ALL=all.cross" >> ${Makefile}
- case "${program_prefix}" in
- "") program_prefix=${target_alias}- ;;
- *) ;;
- esac
-
- tooldir="\$(libdir)/${target_alias}"
- ;;
- esac
-
- # reset prefix, exec_prefix, srcdir, SUBDIRS, NONSUBDIRS,
- # remove any form feeds.
- if [ -z "${subdirs}" ]; then
- sed -e "s:^SUBDIRS[ ]*=.*$:SUBDIRS = ${configdirs}:" \
- -e "s:^NONSUBDIRS[ ]*=.*$:NONSUBDIRS = ${noconfigdirs}:" \
- ${subdir}/Makefile.tem > ${subdir}/Makefile.tem2
- mv ${subdir}/Makefile.tem2 ${subdir}/Makefile.tem
- fi
- sed -e "s:^prefix[ ]*=.*$:prefix = ${prefix}:" \
- -e "s:^exec_prefix[ ]*=.*$:exec_prefix = ${exec_prefix}:" \
- -e "s:^srcdir[ ]*=.*$:srcdir = ${makesrcdir}:" \
- -e "s/\f//" \
- -e "s:^program_prefix[ ]*=.*$:program_prefix = ${program_prefix}:" \
- -e "s:^tooldir[ ]*=.*$:tooldir = ${tooldir}:" \
- ${subdir}/Makefile.tem >> ${Makefile}
- # final copy now in ${Makefile}
-
- rm ${subdir}/Makefile.tem
-
- if [ -n "${verbose}" -o -z "${silent}" ] ; then
- case "${host_makefile_frag}" in
- "") using= ;;
- *) using="and \"${host_makefile_frag}\"" ;;
- esac
-
- case "${target_makefile_frag}" in
- "") ;;
- *) using="${using} and \"${target_makefile_frag}\"" ;;
- esac
-
- case "${site_makefile_frag}" in
- "") ;;
- *) using="${using} and \"${site_makefile_frag}\"" ;;
- esac
-
- echo "Created \"${Makefile}\" in" ${PWD} `echo "${using}" | sed 's/and/using/'`
- fi
-
- . ${tmpfile}.pos
-
- # describe the chosen configuration in config.status.
- # Make that file a shellscript which will reestablish
- # the same configuration. Used in Makefiles to rebuild
- # Makefiles.
-
- case "${norecursion}" in
- "") arguments="${arguments} -norecursion" ;;
- *) ;;
- esac
-
- if [ ${subdir} = . ] ; then
- echo "#!/bin/sh
+ case "${build}" in
+ "") ;;
+ *) cat >> ${Makefile} << EOF
+build_alias = ${build_alias}
+build_cpu = ${build_cpu}
+build_vendor = ${build_vendor}
+build_os = ${build_os}
+build_canonical = ${build_cpu}-${build_vendor}-${build_os}
+EOF
+ esac
+
+ case "${package_makefile_frag}" in
+ "") ;;
+ /*) echo package_makefile_frag = ${package_makefile_frag} >>${Makefile} ;;
+ *) echo package_makefile_frag = ${invsubdir}${package_makefile_frag} >>${Makefile} ;;
+ esac
+
+ case "${target_makefile_frag}" in
+ "") ;;
+ /*) echo target_makefile_frag = ${target_makefile_frag} >>${Makefile} ;;
+ *) echo target_makefile_frag = ${invsubdir}${target_makefile_frag} >>${Makefile} ;;
+ esac
+
+ case "${host_makefile_frag}" in
+ "") ;;
+ /*) echo host_makefile_frag = ${host_makefile_frag} >>${Makefile} ;;
+ *) echo host_makefile_frag = ${invsubdir}${host_makefile_frag} >>${Makefile} ;;
+ esac
+
+ if [ "${site_makefile_frag}" != "" ] ; then
+ echo site_makefile_frag = ${invsubdir}${site_makefile_frag} >>${Makefile}
+ fi
+
+ # provide a proper gxx_include_dir to all subdirs.
+ # Note, if you change the default, make sure to fix both here
+ # and in the gcc subdirectory.
+ if test -z "${with_gxx_include_dir}"; then
+ echo gxx_include_dir = '${prefix}/include/g++' >> ${Makefile}
+ else
+ echo gxx_include_dir = ${with_gxx_include_dir} >> ${Makefile}
+ fi
+
+ # reset prefix, exec_prefix, srcdir, SUBDIRS, NONSUBDIRS,
+ # remove any form feeds.
+ if [ -z "${subdirs}" ]; then
+ rm -f ${subdir}/Makefile.tm2
+ sed -e "s:^SUBDIRS[ ]*=.*$:SUBDIRS = ${configdirs}:" \
+ -e "s:^NONSUBDIRS[ ]*=.*$:NONSUBDIRS = ${noconfigdirs}:" \
+ ${subdir}/Makefile.tem > ${subdir}/Makefile.tm2
+ rm -f ${subdir}/Makefile.tem
+ mv ${subdir}/Makefile.tm2 ${subdir}/Makefile.tem
+ fi
+ sed -e "s|^prefix[ ]*=.*$|prefix = ${prefix}|" \
+ -e "s|^exec_prefix[ ]*=.*$|exec_prefix = ${exec_prefix}|" \
+ -e "s|^bindir[ ]*=.*$|bindir = ${bindir}|" \
+ -e "s|^sbindir[ ]*=.*$|sbindir = ${sbindir}|" \
+ -e "s|^libexecdir[ ]*=.*$|libexecdir = ${libexecdir}|" \
+ -e "s|^datadir[ ]*=.*$|datadir = ${datadir}|" \
+ -e "s|^sysconfdir[ ]*=.*$|sysconfdir = ${sysconfdir}|" \
+ -e "s|^sharedstatedir[ ]*=.*$|sharedstatedir = ${sharedstatedir}|" \
+ -e "s|^localstatedir[ ]*=.*$|localstatedir = ${localstatedir}|" \
+ -e "s|^libdir[ ]*=.*$|libdir = ${libdir}|" \
+ -e "s|^includedir[ ]*=.*$|includedir = ${includedir}|" \
+ -e "s|^oldincludedir[ ]*=.*$|oldincludedir = ${oldincludedir}|" \
+ -e "s|^infodir[ ]*=.*$|infodir = ${infodir}|" \
+ -e "s|^mandir[ ]*=.*$|mandir = ${mandir}|" \
+ -e "/^CC[ ]*=/{
+ :loop1
+ /\\\\$/ N
+ s/\\\\\\n//g
+ t loop1
+ s%^CC[ ]*=.*$%CC = ${CC}%
+ }" \
+ -e "/^CXX[ ]*=/{
+ :loop2
+ /\\\\$/ N
+ s/\\\\\\n//g
+ t loop2
+ s%^CXX[ ]*=.*$%CXX = ${CXX}%
+ }" \
+ -e "/^CFLAGS[ ]*=/{
+ :loop3
+ /\\\\$/ N
+ s/\\\\\\n//g
+ t loop3
+ s%^CFLAGS[ ]*=.*$%CFLAGS = ${CFLAGS}%
+ }" \
+ -e "/^CXXFLAGS[ ]*=/{
+ :loop4
+ /\\\\$/ N
+ s/\\\\\\n//g
+ t loop4
+ s%^CXXFLAGS[ ]*=.*$%CXXFLAGS = ${CXXFLAGS}%
+ }" \
+ -e "s|^SHELL[ ]*=.*$|SHELL = ${config_shell}|" \
+ -e "s|^srcdir[ ]*=.*$|srcdir = ${makesrcdir}|" \
+ -e "s/\f//" \
+ -e "s:^program_prefix[ ]*=.*$:program_prefix = ${program_prefix}:" \
+ -e "s:^program_suffix[ ]*=.*$:program_suffix = ${program_suffix}:" \
+ -e "s:^program_transform_name[ ]*=.*$:program_transform_name = ${program_transform_name}:" \
+ -e "s|^tooldir[ ]*=.*$|tooldir = ${tooldir}|" \
+ -e "s:^DEFAULT_YACC[ ]*=.*$:DEFAULT_YACC = ${DEFAULT_YACC}:" \
+ -e "s:^DEFAULT_LEX[ ]*=.*$:DEFAULT_LEX = ${DEFAULT_LEX}:" \
+ ${subdir}/Makefile.tem >> ${Makefile}
+ # start-sanitize-gdbtk
+ sed -e "s:^GDB_TK[ ]*=.*$:GDB_TK = ${GDB_TK}:" ${Makefile} >${Makefile}.tem
+ mv -f ${Makefile}.tem ${Makefile}
+ # end-sanitize-gdbtk
+
+ # If this is a Canadian Cross, preset the values of many more
+ # tools.
+ if [ "${build}" != "${host}" ]; then
+ for var in ${tools}; do
+ val=`eval 'echo $'"${var}"`
+ sed -e "/^${var}[ ]*=/{
+ :loop1
+ /\\\\$/ N
+ /\\\\$/ b loop1
+ s/\\\\\\n//g
+ s%^${var}[ ]*=.*$%${var} = ${val}%
+ }" ${Makefile} > ${Makefile}.tem
+ mv -f ${Makefile}.tem ${Makefile}
+ done
+ fi
+
+ # final copy now in ${Makefile}
+
+ else
+ echo "No Makefile.in found in ${srcdir}/${subdir}, unable to configure" 1>&2
+ fi
+
+ rm -f ${subdir}/Makefile.tem
+
+ case "${host_makefile_frag}" in
+ "") using= ;;
+ *) using="and \"${host_makefile_frag}\"" ;;
+ esac
+
+ case "${target_makefile_frag}" in
+ "") ;;
+ *) using="${using} and \"${target_makefile_frag}\"" ;;
+ esac
+
+ case "${site_makefile_frag}" in
+ "") ;;
+ *) using="${using} and \"${site_makefile_frag}\"" ;;
+ esac
+
+ newusing=`echo "${using}" | sed 's/and/using/'`
+ using=${newusing}
+ echo "Created \"${Makefile}\" in" ${PWD=`pwd`} ${using}
+
+ . ${tmpfile}.pos
+
+ # describe the chosen configuration in config.status.
+ # Make that file a shellscript which will reestablish
+ # the same configuration. Used in Makefiles to rebuild
+ # Makefiles.
+
+ case "${norecursion}" in
+ "") arguments="${arguments} --norecursion" ;;
+ *) ;;
+ esac
+
+ if [ ${subdir} = . ] ; then
+ echo "#!/bin/sh