+# These force 'configure's to be done one at a time, to avoid problems
+# with contention over a shared config.cache.
+rm -f serdep.tmp
+echo '# serdep.tmp' > serdep.tmp
+olditem=
+test "x${enable_serial_build_configure}" = xyes &&
+for item in ${build_configdirs} ; do
+ case ${olditem} in
+ "") ;;
+ *) echo "configure-build-${item}: configure-build-${olditem}" >> serdep.tmp ;;
+ esac
+ olditem=${item}
+done
+olditem=
+test "x${enable_serial_host_configure}" = xyes &&
+for item in ${configdirs} ; do
+ case ${olditem} in
+ "") ;;
+ *) echo "configure-${item}: configure-${olditem}" >> serdep.tmp ;;
+ esac
+ olditem=${item}
+done
+olditem=
+test "x${enable_serial_target_configure}" = xyes &&
+for item in ${target_configdirs} ; do
+ case ${olditem} in
+ "") ;;
+ *) echo "configure-target-${item}: configure-target-${olditem}" >> serdep.tmp ;;
+ esac
+ olditem=${item}
+done
+serialization_dependencies=serdep.tmp
+
+
+# Base args. Strip norecursion, cache-file, srcdir, host, build,
+# target and nonopt. These are the ones we might not want to pass
+# down to subconfigures. Also strip program-prefix, program-suffix,
+# and program-transform-name, so that we can pass down a consistent
+# program-transform-name. If autoconf has put single quotes around
+# any of these arguments (because they contain shell metacharacters)
+# then this will fail; in practice this only happens for
+# --program-transform-name, so be sure to override --program-transform-name
+# at the end of the argument list.
+# These will be expanded by make, so quote '$'.
+cat <<\EOF_SED > conftestsed
+s/ --no[^ ]* / /
+s/ --c[a-z-]*[= ][^ ]* / /
+s/ --sr[a-z-]*[= ][^ ]* / /
+s/ --ho[a-z-]*[= ][^ ]* / /
+s/ --bu[a-z-]*[= ][^ ]* / /
+s/ --t[a-z-]*[= ][^ ]* / /
+s/ --program-[pst][a-z-]*[= ][^ ]* / /
+s/ -cache-file[= ][^ ]* / /
+s/ -srcdir[= ][^ ]* / /
+s/ -host[= ][^ ]* / /
+s/ -build[= ][^ ]* / /
+s/ -target[= ][^ ]* / /
+s/ -program-prefix[= ][^ ]* / /
+s/ -program-suffix[= ][^ ]* / /
+s/ -program-transform-name[= ][^ ]* / /
+s/ [^' -][^ ]* / /
+s/^ *//;s/ *$//
+s,\$,$$,g
+EOF_SED
+sed -f conftestsed <<EOF_SED > conftestsed.out
+ ${ac_configure_args}
+EOF_SED
+baseargs=`cat conftestsed.out`
+rm -f conftestsed conftestsed.out
+
+# Add in --program-transform-name, after --program-prefix and
+# --program-suffix have been applied to it. Autoconf has already
+# doubled dollar signs and backslashes in program_transform_name; we want
+# the backslashes un-doubled, and then the entire thing wrapped in single
+# quotes, because this will be expanded first by make and then by the shell.
+# Also, because we want to override the logic in subdir configure scripts to
+# choose program_transform_name, replace any s,x,x, with s,y,y,.
+sed -e "s,\\\\\\\\,\\\\,g; s,','\\\\'',g; s/s,x,x,/s,y,y,/" <<EOF_SED > conftestsed.out
+${program_transform_name}
+EOF_SED
+gcc_transform_name=`cat conftestsed.out`
+rm -f conftestsed.out
+baseargs="$baseargs --program-transform-name='${gcc_transform_name}'"
+
+# For the build-side libraries, we just need to pretend we're native,
+# and not use the same cache file. Multilibs are neither needed nor
+# desired.
+build_configargs="--cache-file=../config.cache --build=${build_alias} --host=${build_alias} ${baseargs}"
+
+# For host modules, accept cache file option, or specification as blank.
+case "${cache_file}" in
+"") # empty
+ cache_file_option="" ;;
+/* | [A-Za-z]:[\\/]* ) # absolute path
+ cache_file_option="--cache-file=${cache_file}" ;;
+*) # relative path
+ cache_file_option="--cache-file=../${cache_file}" ;;
+esac
+
+# Host dirs don't like to share a cache file either, horribly enough.
+# This seems to be due to autoconf 2.5x stupidity.
+host_configargs="--cache-file=./config.cache --build=${build_alias} --host=${host_alias} --target=${target_alias} ${extra_host_args} ${baseargs}"
+
+target_configargs=${baseargs}
+
+# Passing a --with-cross-host argument lets the target libraries know
+# whether they are being built with a cross-compiler or being built
+# native. However, it would be better to use other mechanisms to make the
+# sorts of decisions they want to make on this basis. Please consider
+# this option to be deprecated. FIXME.
+if test x${is_cross_compiler} = xyes ; then
+ target_configargs="--with-cross-host=${host_alias} ${target_configargs}"
+fi
+
+# Default to --enable-multilib.
+if test x${enable_multilib} = x ; then
+ target_configargs="--enable-multilib ${target_configargs}"
+fi
+
+# Pass --with-newlib if appropriate. Note that target_configdirs has
+# changed from the earlier setting of with_newlib.
+if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " newlib " > /dev/null 2>&1 && test -d ${srcdir}/newlib ; then
+ target_configargs="--with-newlib ${target_configargs}"
+fi
+
+# Different target subdirs use different values of certain variables
+# (notably CXX). Worse, multilibs use *lots* of different values.
+# Worse yet, autoconf 2.5x makes some of these 'precious', meaning that
+# it doesn't automatically accept command-line overrides of them.
+# This means it's not safe for target subdirs to share a cache file,
+# which is disgusting, but there you have it. Hopefully this can be
+# fixed in future. It's still worthwhile to use a cache file for each
+# directory. I think.
+
+# Pass the appropriate --host, --build, and --cache-file arguments.
+target_configargs="--cache-file=./config.cache --host=${target_alias} --build=${build_alias} ${target_configargs}"
+
+# provide a proper gxx_include_dir.
+# Note, if you change the default, make sure to fix both here and in
+# the gcc and libstdc++-v3 subdirectories.
+# Check whether --with-gxx-include-dir or --without-gxx-include-dir was given.
+case "${with_gxx_include_dir}" in
+ yes)
+ { echo "configure: error: --with-gxx-include-dir=[dir] requires a directory" 1>&2; exit 1; }
+ ;;
+ no | "")
+ case "${enable_version_specific_runtime_libs}" in
+ yes) gxx_include_dir='${libsubdir}/include/c++' ;;
+ *)
+ . ${srcdir}/config.if
+ gxx_include_dir='${prefix}/include/'${libstdcxx_incdir} ;;
+ esac ;;
+ *) gxx_include_dir=${with_gxx_include_dir} ;;
+esac
+
+FLAGS_FOR_TARGET=
+case " $target_configdirs " in
+ *" newlib "*)
+ case " $target_configargs " in
+ *" --with-newlib "*)
+ case "$target" in
+ *-cygwin*)
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup -L$$r/$(TARGET_SUBDIR)/winsup/cygwin -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -isystem $$s/winsup/include -isystem $$s/winsup/cygwin/include -isystem $$s/winsup/w32api/include' ;;
+ esac
+
+ # If we're not building GCC, don't discard standard headers.
+ if test -d ${srcdir}/gcc; then
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -nostdinc'
+
+ if test "${build}" != "${host}"; then
+ # On Canadian crosses, CC_FOR_TARGET will have already been set
+ # by `configure', so we won't have an opportunity to add -Bgcc/
+ # to it. This is right: we don't want to search that directory
+ # for binaries, but we want the header files in there, so add
+ # them explicitly.
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -isystem $$r/gcc/include'
+
+ # Someone might think of using the pre-installed headers on
+ # Canadian crosses, in case the installed compiler is not fully
+ # compatible with the compiler being built. In this case, it
+ # would be better to flag an error than risking having
+ # incompatible object files being constructed. We can't
+ # guarantee that an error will be flagged, but let's hope the
+ # compiler will do it, when presented with incompatible header
+ # files.
+ fi
+ fi
+
+ case "${target}-${is_cross_compiler}" in
+ i[3456789]86-*-linux*-no)
+ # Here host == target, so we don't need to build gcc,
+ # so we don't want to discard standard headers.
+ FLAGS_FOR_TARGET=`echo " $FLAGS_FOR_TARGET " | sed -e 's/ -nostdinc / /'`
+ ;;
+ *)
+ # If we're building newlib, use its generic headers last, but search
+ # for any libc-related directories first (so make it the last -B
+ # switch).
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$$r/$(TARGET_SUBDIR)/newlib/ -isystem $$r/$(TARGET_SUBDIR)/newlib/targ-include -isystem $$s/newlib/libc/include'
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+esac
+
+# Allow the user to override the flags for
+# our build compiler if desired.
+CFLAGS_FOR_BUILD=${CFLAGS_FOR_BUILD-${CFLAGS}}
+
+# On Canadian crosses, we'll be searching the right directories for
+# the previously-installed cross compiler, so don't bother to add
+# flags for directories within the install tree of the compiler
+# being built; programs in there won't even run.
+if test "${build}" = "${host}" && test -d ${srcdir}/gcc; then
+ # Search for pre-installed headers if nothing else fits.
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$(build_tooldir)/bin/ -B$(build_tooldir)/lib/ -isystem $(build_tooldir)/include -isystem $(build_tooldir)/sys-include'
+fi
+
+if test "x${use_gnu_ld}" = x &&
+ echo " ${configdirs} " | grep " ld " > /dev/null ; then
+ # Arrange for us to find uninstalled linker scripts.
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/ld'
+fi
+
+if test "x${CC_FOR_TARGET+set}" = xset; then
+ :
+elif test -d ${srcdir}/gcc; then
+ CC_FOR_TARGET='$$r/gcc/xgcc -B$$r/gcc/'
+elif test "$host" = "$target"; then
+ CC_FOR_TARGET='$(CC)'
+else
+ CC_FOR_TARGET=`echo gcc | sed "${program_transform_name}"`
+fi
+CC_FOR_TARGET=$CC_FOR_TARGET' $(FLAGS_FOR_TARGET)'
+
+if test "x${GCJ_FOR_TARGET+set}" = xset; then
+ :
+elif test -d ${srcdir}/gcc; then
+ GCJ_FOR_TARGET='$$r/gcc/gcj -B$$r/gcc/'
+elif test "$host" = "$target"; then
+ GCJ_FOR_TARGET='gcj'
+else
+ GCJ_FOR_TARGET=`echo gcj | sed "${program_transform_name}"`
+fi
+GCJ_FOR_TARGET=$GCJ_FOR_TARGET' $(FLAGS_FOR_TARGET)'
+
+# Don't use libstdc++-v3's flags to configure/build itself.
+libstdcxx_flags='`test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
+raw_libstdcxx_flags='-L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
+
+if test "x${CXX_FOR_TARGET+set}" = xset; then
+ if test "x${RAW_CXX_FOR_TARGET+set}" != xset; then
+ RAW_CXX_FOR_TARGET=${CXX_FOR_TARGET}
+ fi
+elif test -d ${srcdir}/gcc; then
+ # We add -shared-libgcc to CXX_FOR_TARGET whenever we use xgcc instead
+ # of g++ for linking C++ or Java, because g++ has -shared-libgcc by
+ # default whereas gcc does not.
+ # RAW_CXX_FOR_TARGET is for linking C++ or java; CXX_FOR_TARGET is for
+ # all other cases.
+ CXX_FOR_TARGET='$$r/gcc/g++ -B$$r/gcc/ -nostdinc++ '$libstdcxx_flags
+ RAW_CXX_FOR_TARGET='$$r/gcc/xgcc -shared-libgcc -B$$r/gcc/ -nostdinc++ '$raw_libstdcxx_flags
+elif test "$host" = "$target"; then
+ CXX_FOR_TARGET='$(CXX)'
+ RAW_CXX_FOR_TARGET=${CXX_FOR_TARGET}
+else
+ CXX_FOR_TARGET=`echo c++ | sed "${program_transform_name}"`
+ RAW_CXX_FOR_TARGET=${CXX_FOR_TARGET}
+fi
+CXX_FOR_TARGET=$CXX_FOR_TARGET' $(FLAGS_FOR_TARGET)'
+RAW_CXX_FOR_TARGET=$RAW_CXX_FOR_TARGET' $(FLAGS_FOR_TARGET)'
+
+qCXX_FOR_TARGET=`echo "$CXX_FOR_TARGET" | sed 's,[&%],\\\&,g'`
+qRAW_CXX_FOR_TARGET=`echo "$RAW_CXX_FOR_TARGET" | sed 's,[&%],\\\&,g'`
+
+# We want to defer the evaluation of `cmd`s and shell variables in
+# CXX_FOR_TARGET when recursing in the top-level Makefile, such as for
+# bootstrap. We'll enclose CXX_FOR_TARGET_FOR_RECURSIVE_MAKE in single
+# quotes, but we still have to duplicate `$'s so that shell variables
+# can be expanded by the nested make as shell variables, not as make
+# macros.
+qqCXX_FOR_TARGET=`echo "$qCXX_FOR_TARGET" | sed -e 's,[$][$],$$$$,g'`
+qqRAW_CXX_FOR_TARGET=`echo "$qRAW_CXX_FOR_TARGET" | sed -e 's,[$][$],$$$$,g'`
+
+# Wrap CC_FOR_TARGET and friends, for certain types of builds.
+CC_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${CC_FOR_TARGET}"
+GCJ_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${GCJ_FOR_TARGET}"
+CXX_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${qCXX_FOR_TARGET}"
+RAW_CXX_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${qRAW_CXX_FOR_TARGET}"
+CXX_FOR_TARGET_FOR_RECURSIVE_MAKE="\$(STAGE_CC_WRAPPER) ${qqCXX_FOR_TARGET}"
+RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE="\$(STAGE_CC_WRAPPER) ${qqRAW_CXX_FOR_TARGET}"
+
+# Makefile fragments.
+host_makefile_frag=${srcdir}/${host_makefile_frag}
+target_makefile_frag=${srcdir}/${target_makefile_frag}
+alphaieee_frag=${srcdir}/${alphaieee_frag}
+ospace_frag=${srcdir}/${ospace_frag}
+
+
+
+
+
+# Miscellanea: directories, flags, etc.
+
+
+
+
+
+
+
+
+
+
+
+
+# Build module lists & subconfigure args.
+
+
+
+
+# Host module lists & subconfigure args.
+
+
+
+# Target module lists & subconfigure args.
+
+
+
+# Build tools.
+
+
+
+
+
+
+
+# Host tools.
+ncn_tool_prefix=
+test -n "$host_alias" && ncn_tool_prefix=$host_alias-
+ncn_target_tool_prefix=
+test -n "$target_alias" && ncn_target_tool_prefix=$target_alias-
+
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}ar", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}ar; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3245: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_AR="${ncn_tool_prefix}ar"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+AR="$ac_cv_prog_AR"
+if test -n "$AR"; then
+ echo "$ac_t""$AR" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_prog_AR" ; then
+ if test $build = $host ; then
+ ncn_cv_AR=$AR
+ # Extract the first word of "ar", so it can be a program name with args.
+set dummy ar; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3278: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$ncn_cv_AR"; then
+ ac_cv_prog_ncn_cv_AR="$ncn_cv_AR" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_ncn_cv_AR="ar"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_ncn_cv_AR" && ac_cv_prog_ncn_cv_AR="ar"
+fi
+fi
+ncn_cv_AR="$ac_cv_prog_ncn_cv_AR"
+if test -n "$ncn_cv_AR"; then
+ echo "$ac_t""$ncn_cv_AR" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ AR=$ncn_cv_AR
+ else
+ AR="${ncn_tool_prefix}ar"
+ fi
+else
+ AR="$ac_cv_prog_AR"
+fi
+
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}as", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}as; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3317: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$AS"; then
+ ac_cv_prog_AS="$AS" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_AS="${ncn_tool_prefix}as"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+AS="$ac_cv_prog_AS"
+if test -n "$AS"; then
+ echo "$ac_t""$AS" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_prog_AS" ; then
+ if test $build = $host ; then
+ ncn_cv_AS=$AS
+ # Extract the first word of "as", so it can be a program name with args.
+set dummy as; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3350: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$ncn_cv_AS"; then
+ ac_cv_prog_ncn_cv_AS="$ncn_cv_AS" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_ncn_cv_AS="as"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_ncn_cv_AS" && ac_cv_prog_ncn_cv_AS="as"
+fi
+fi
+ncn_cv_AS="$ac_cv_prog_ncn_cv_AS"
+if test -n "$ncn_cv_AS"; then
+ echo "$ac_t""$ncn_cv_AS" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ AS=$ncn_cv_AS
+ else
+ AS="${ncn_tool_prefix}as"
+ fi
+else
+ AS="$ac_cv_prog_AS"
+fi
+
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}dlltool; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3389: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$DLLTOOL"; then
+ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_DLLTOOL="${ncn_tool_prefix}dlltool"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+DLLTOOL="$ac_cv_prog_DLLTOOL"
+if test -n "$DLLTOOL"; then
+ echo "$ac_t""$DLLTOOL" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_prog_DLLTOOL" ; then
+ if test $build = $host ; then
+ ncn_cv_DLLTOOL=$DLLTOOL
+ # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3422: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$ncn_cv_DLLTOOL"; then
+ ac_cv_prog_ncn_cv_DLLTOOL="$ncn_cv_DLLTOOL" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_ncn_cv_DLLTOOL="dlltool"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_ncn_cv_DLLTOOL" && ac_cv_prog_ncn_cv_DLLTOOL="dlltool"
+fi
+fi
+ncn_cv_DLLTOOL="$ac_cv_prog_ncn_cv_DLLTOOL"
+if test -n "$ncn_cv_DLLTOOL"; then
+ echo "$ac_t""$ncn_cv_DLLTOOL" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ DLLTOOL=$ncn_cv_DLLTOOL
+ else
+ DLLTOOL="${ncn_tool_prefix}dlltool"
+ fi
+else
+ DLLTOOL="$ac_cv_prog_DLLTOOL"
+fi
+
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}ld", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}ld; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3461: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$LD"; then
+ ac_cv_prog_LD="$LD" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_LD="${ncn_tool_prefix}ld"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+LD="$ac_cv_prog_LD"
+if test -n "$LD"; then
+ echo "$ac_t""$LD" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_prog_LD" ; then
+ if test $build = $host ; then
+ ncn_cv_LD=$LD
+ # Extract the first word of "ld", so it can be a program name with args.
+set dummy ld; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3494: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$ncn_cv_LD"; then
+ ac_cv_prog_ncn_cv_LD="$ncn_cv_LD" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_ncn_cv_LD="ld"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_ncn_cv_LD" && ac_cv_prog_ncn_cv_LD="ld"
+fi
+fi
+ncn_cv_LD="$ac_cv_prog_ncn_cv_LD"
+if test -n "$ncn_cv_LD"; then
+ echo "$ac_t""$ncn_cv_LD" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ LD=$ncn_cv_LD
+ else
+ LD="${ncn_tool_prefix}ld"
+ fi
+else
+ LD="$ac_cv_prog_LD"
+fi
+
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}nm", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}nm; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3533: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$NM"; then
+ ac_cv_prog_NM="$NM" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_NM="${ncn_tool_prefix}nm"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+NM="$ac_cv_prog_NM"
+if test -n "$NM"; then
+ echo "$ac_t""$NM" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_prog_NM" ; then
+ if test $build = $host ; then
+ ncn_cv_NM=$NM
+ # Extract the first word of "nm", so it can be a program name with args.
+set dummy nm; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3566: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$ncn_cv_NM"; then
+ ac_cv_prog_ncn_cv_NM="$ncn_cv_NM" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_ncn_cv_NM="nm"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_ncn_cv_NM" && ac_cv_prog_ncn_cv_NM="nm"
+fi
+fi
+ncn_cv_NM="$ac_cv_prog_ncn_cv_NM"
+if test -n "$ncn_cv_NM"; then
+ echo "$ac_t""$ncn_cv_NM" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ NM=$ncn_cv_NM
+ else
+ NM="${ncn_tool_prefix}nm"
+ fi
+else
+ NM="$ac_cv_prog_NM"
+fi
+
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3605: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_RANLIB="${ncn_tool_prefix}ranlib"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_prog_RANLIB" ; then
+ if test $build = $host ; then
+ ncn_cv_RANLIB=$RANLIB
+ # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3638: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$ncn_cv_RANLIB"; then
+ ac_cv_prog_ncn_cv_RANLIB="$ncn_cv_RANLIB" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_ncn_cv_RANLIB="ranlib"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_ncn_cv_RANLIB" && ac_cv_prog_ncn_cv_RANLIB=":"
+fi
+fi
+ncn_cv_RANLIB="$ac_cv_prog_ncn_cv_RANLIB"
+if test -n "$ncn_cv_RANLIB"; then
+ echo "$ac_t""$ncn_cv_RANLIB" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ RANLIB=$ncn_cv_RANLIB
+ else
+ RANLIB=":"
+ fi
+else
+ RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}windres", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}windres; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3677: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$WINDRES"; then
+ ac_cv_prog_WINDRES="$WINDRES" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_WINDRES="${ncn_tool_prefix}windres"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+WINDRES="$ac_cv_prog_WINDRES"
+if test -n "$WINDRES"; then
+ echo "$ac_t""$WINDRES" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_prog_WINDRES" ; then
+ if test $build = $host ; then
+ ncn_cv_WINDRES=$WINDRES
+ # Extract the first word of "windres", so it can be a program name with args.
+set dummy windres; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3710: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$ncn_cv_WINDRES"; then
+ ac_cv_prog_ncn_cv_WINDRES="$ncn_cv_WINDRES" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_ncn_cv_WINDRES="windres"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_ncn_cv_WINDRES" && ac_cv_prog_ncn_cv_WINDRES="windres"
+fi
+fi
+ncn_cv_WINDRES="$ac_cv_prog_ncn_cv_WINDRES"
+if test -n "$ncn_cv_WINDRES"; then
+ echo "$ac_t""$ncn_cv_WINDRES" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ WINDRES=$ncn_cv_WINDRES
+ else
+ WINDRES="${ncn_tool_prefix}windres"
+ fi
+else
+ WINDRES="$ac_cv_prog_WINDRES"
+fi
+
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}objcopy", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}objcopy; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3749: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$OBJCOPY"; then
+ ac_cv_prog_OBJCOPY="$OBJCOPY" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_OBJCOPY="${ncn_tool_prefix}objcopy"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+OBJCOPY="$ac_cv_prog_OBJCOPY"
+if test -n "$OBJCOPY"; then
+ echo "$ac_t""$OBJCOPY" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_prog_OBJCOPY" ; then
+ if test $build = $host ; then
+ ncn_cv_OBJCOPY=$OBJCOPY
+ # Extract the first word of "objcopy", so it can be a program name with args.
+set dummy objcopy; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3782: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJCOPY'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$ncn_cv_OBJCOPY"; then
+ ac_cv_prog_ncn_cv_OBJCOPY="$ncn_cv_OBJCOPY" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_ncn_cv_OBJCOPY="objcopy"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_ncn_cv_OBJCOPY" && ac_cv_prog_ncn_cv_OBJCOPY="objcopy"
+fi
+fi
+ncn_cv_OBJCOPY="$ac_cv_prog_ncn_cv_OBJCOPY"
+if test -n "$ncn_cv_OBJCOPY"; then
+ echo "$ac_t""$ncn_cv_OBJCOPY" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ OBJCOPY=$ncn_cv_OBJCOPY
+ else
+ OBJCOPY="${ncn_tool_prefix}objcopy"
+ fi
+else
+ OBJCOPY="$ac_cv_prog_OBJCOPY"
+fi
+
+ if test -n "$ncn_tool_prefix"; then
+ # Extract the first word of "${ncn_tool_prefix}objdump", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}objdump; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3821: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$OBJDUMP"; then
+ ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_OBJDUMP="${ncn_tool_prefix}objdump"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+OBJDUMP="$ac_cv_prog_OBJDUMP"
+if test -n "$OBJDUMP"; then
+ echo "$ac_t""$OBJDUMP" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_prog_OBJDUMP" ; then
+ if test $build = $host ; then
+ ncn_cv_OBJDUMP=$OBJDUMP
+ # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3854: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJDUMP'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$ncn_cv_OBJDUMP"; then
+ ac_cv_prog_ncn_cv_OBJDUMP="$ncn_cv_OBJDUMP" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_ncn_cv_OBJDUMP="objdump"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_ncn_cv_OBJDUMP" && ac_cv_prog_ncn_cv_OBJDUMP="objdump"
+fi
+fi
+ncn_cv_OBJDUMP="$ac_cv_prog_ncn_cv_OBJDUMP"
+if test -n "$ncn_cv_OBJDUMP"; then
+ echo "$ac_t""$ncn_cv_OBJDUMP" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ OBJDUMP=$ncn_cv_OBJDUMP
+ else
+ OBJDUMP="${ncn_tool_prefix}objdump"
+ fi
+else
+ OBJDUMP="$ac_cv_prog_OBJDUMP"
+fi
+
+
+
+
+
+
+
+
+
+
+# Target tools.
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}ar", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}ar; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3903: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$AR_FOR_TARGET"; then
+ ac_cv_prog_AR_FOR_TARGET="$AR_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_AR_FOR_TARGET="${ncn_target_tool_prefix}ar"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+AR_FOR_TARGET="$ac_cv_prog_AR_FOR_TARGET"
+if test -n "$AR_FOR_TARGET"; then
+ echo "$ac_t""$AR_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_prog_AR_FOR_TARGET" ; then
+ if test $build = $target ; then
+ ncn_cv_AR_FOR_TARGET=$AR_FOR_TARGET
+ # Extract the first word of "ar", so it can be a program name with args.
+set dummy ar; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3936: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$ncn_cv_AR_FOR_TARGET"; then
+ ac_cv_prog_ncn_cv_AR_FOR_TARGET="$ncn_cv_AR_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_ncn_cv_AR_FOR_TARGET="ar"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_ncn_cv_AR_FOR_TARGET" && ac_cv_prog_ncn_cv_AR_FOR_TARGET="ar"
+fi
+fi
+ncn_cv_AR_FOR_TARGET="$ac_cv_prog_ncn_cv_AR_FOR_TARGET"
+if test -n "$ncn_cv_AR_FOR_TARGET"; then
+ echo "$ac_t""$ncn_cv_AR_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ AR_FOR_TARGET=$ncn_cv_AR_FOR_TARGET
+ else
+ AR_FOR_TARGET="${ncn_target_tool_prefix}ar"
+ fi
+else
+ AR_FOR_TARGET="$ac_cv_prog_AR_FOR_TARGET"
+fi
+
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}as", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}as; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3975: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$AS_FOR_TARGET"; then
+ ac_cv_prog_AS_FOR_TARGET="$AS_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_AS_FOR_TARGET="${ncn_target_tool_prefix}as"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+AS_FOR_TARGET="$ac_cv_prog_AS_FOR_TARGET"
+if test -n "$AS_FOR_TARGET"; then
+ echo "$ac_t""$AS_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_prog_AS_FOR_TARGET" ; then
+ if test $build = $target ; then
+ ncn_cv_AS_FOR_TARGET=$AS_FOR_TARGET
+ # Extract the first word of "as", so it can be a program name with args.
+set dummy as; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4008: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$ncn_cv_AS_FOR_TARGET"; then
+ ac_cv_prog_ncn_cv_AS_FOR_TARGET="$ncn_cv_AS_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_ncn_cv_AS_FOR_TARGET="as"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_ncn_cv_AS_FOR_TARGET" && ac_cv_prog_ncn_cv_AS_FOR_TARGET="as"
+fi
+fi
+ncn_cv_AS_FOR_TARGET="$ac_cv_prog_ncn_cv_AS_FOR_TARGET"
+if test -n "$ncn_cv_AS_FOR_TARGET"; then
+ echo "$ac_t""$ncn_cv_AS_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ AS_FOR_TARGET=$ncn_cv_AS_FOR_TARGET
+ else
+ AS_FOR_TARGET="${ncn_target_tool_prefix}as"
+ fi
+else
+ AS_FOR_TARGET="$ac_cv_prog_AS_FOR_TARGET"
+fi
+
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}dlltool; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4047: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$DLLTOOL_FOR_TARGET"; then
+ ac_cv_prog_DLLTOOL_FOR_TARGET="$DLLTOOL_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_DLLTOOL_FOR_TARGET="${ncn_target_tool_prefix}dlltool"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+DLLTOOL_FOR_TARGET="$ac_cv_prog_DLLTOOL_FOR_TARGET"
+if test -n "$DLLTOOL_FOR_TARGET"; then
+ echo "$ac_t""$DLLTOOL_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_prog_DLLTOOL_FOR_TARGET" ; then
+ if test $build = $target ; then
+ ncn_cv_DLLTOOL_FOR_TARGET=$DLLTOOL_FOR_TARGET
+ # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4080: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$ncn_cv_DLLTOOL_FOR_TARGET"; then
+ ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET="$ncn_cv_DLLTOOL_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET="dlltool"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET" && ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET="dlltool"
+fi
+fi
+ncn_cv_DLLTOOL_FOR_TARGET="$ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET"
+if test -n "$ncn_cv_DLLTOOL_FOR_TARGET"; then
+ echo "$ac_t""$ncn_cv_DLLTOOL_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ DLLTOOL_FOR_TARGET=$ncn_cv_DLLTOOL_FOR_TARGET
+ else
+ DLLTOOL_FOR_TARGET="${ncn_target_tool_prefix}dlltool"
+ fi
+else
+ DLLTOOL_FOR_TARGET="$ac_cv_prog_DLLTOOL_FOR_TARGET"
+fi
+
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}ld", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}ld; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4119: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$LD_FOR_TARGET"; then
+ ac_cv_prog_LD_FOR_TARGET="$LD_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_LD_FOR_TARGET="${ncn_target_tool_prefix}ld"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+LD_FOR_TARGET="$ac_cv_prog_LD_FOR_TARGET"
+if test -n "$LD_FOR_TARGET"; then
+ echo "$ac_t""$LD_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_prog_LD_FOR_TARGET" ; then
+ if test $build = $target ; then
+ ncn_cv_LD_FOR_TARGET=$LD_FOR_TARGET
+ # Extract the first word of "ld", so it can be a program name with args.
+set dummy ld; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4152: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$ncn_cv_LD_FOR_TARGET"; then
+ ac_cv_prog_ncn_cv_LD_FOR_TARGET="$ncn_cv_LD_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_ncn_cv_LD_FOR_TARGET="ld"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_ncn_cv_LD_FOR_TARGET" && ac_cv_prog_ncn_cv_LD_FOR_TARGET="ld"
+fi
+fi
+ncn_cv_LD_FOR_TARGET="$ac_cv_prog_ncn_cv_LD_FOR_TARGET"
+if test -n "$ncn_cv_LD_FOR_TARGET"; then
+ echo "$ac_t""$ncn_cv_LD_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ LD_FOR_TARGET=$ncn_cv_LD_FOR_TARGET
+ else
+ LD_FOR_TARGET="${ncn_target_tool_prefix}ld"
+ fi
+else
+ LD_FOR_TARGET="$ac_cv_prog_LD_FOR_TARGET"
+fi
+
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}nm", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}nm; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4191: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$NM_FOR_TARGET"; then
+ ac_cv_prog_NM_FOR_TARGET="$NM_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_NM_FOR_TARGET="${ncn_target_tool_prefix}nm"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+NM_FOR_TARGET="$ac_cv_prog_NM_FOR_TARGET"
+if test -n "$NM_FOR_TARGET"; then
+ echo "$ac_t""$NM_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_prog_NM_FOR_TARGET" ; then
+ if test $build = $target ; then
+ ncn_cv_NM_FOR_TARGET=$NM_FOR_TARGET
+ # Extract the first word of "nm", so it can be a program name with args.
+set dummy nm; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4224: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$ncn_cv_NM_FOR_TARGET"; then
+ ac_cv_prog_ncn_cv_NM_FOR_TARGET="$ncn_cv_NM_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_ncn_cv_NM_FOR_TARGET="nm"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_ncn_cv_NM_FOR_TARGET" && ac_cv_prog_ncn_cv_NM_FOR_TARGET="nm"
+fi
+fi
+ncn_cv_NM_FOR_TARGET="$ac_cv_prog_ncn_cv_NM_FOR_TARGET"
+if test -n "$ncn_cv_NM_FOR_TARGET"; then
+ echo "$ac_t""$ncn_cv_NM_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ NM_FOR_TARGET=$ncn_cv_NM_FOR_TARGET
+ else
+ NM_FOR_TARGET="${ncn_target_tool_prefix}nm"
+ fi
+else
+ NM_FOR_TARGET="$ac_cv_prog_NM_FOR_TARGET"
+fi
+
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4263: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$RANLIB_FOR_TARGET"; then
+ ac_cv_prog_RANLIB_FOR_TARGET="$RANLIB_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_RANLIB_FOR_TARGET="${ncn_target_tool_prefix}ranlib"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+RANLIB_FOR_TARGET="$ac_cv_prog_RANLIB_FOR_TARGET"
+if test -n "$RANLIB_FOR_TARGET"; then
+ echo "$ac_t""$RANLIB_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_prog_RANLIB_FOR_TARGET" ; then
+ if test $build = $target ; then
+ ncn_cv_RANLIB_FOR_TARGET=$RANLIB_FOR_TARGET
+ # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4296: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$ncn_cv_RANLIB_FOR_TARGET"; then
+ ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET="$ncn_cv_RANLIB_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET="ranlib"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET" && ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET=":"
+fi
+fi
+ncn_cv_RANLIB_FOR_TARGET="$ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET"
+if test -n "$ncn_cv_RANLIB_FOR_TARGET"; then
+ echo "$ac_t""$ncn_cv_RANLIB_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ RANLIB_FOR_TARGET=$ncn_cv_RANLIB_FOR_TARGET
+ else
+ RANLIB_FOR_TARGET=":"
+ fi
+else
+ RANLIB_FOR_TARGET="$ac_cv_prog_RANLIB_FOR_TARGET"
+fi
+
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}windres", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}windres; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4335: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$WINDRES_FOR_TARGET"; then
+ ac_cv_prog_WINDRES_FOR_TARGET="$WINDRES_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_WINDRES_FOR_TARGET="${ncn_target_tool_prefix}windres"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+WINDRES_FOR_TARGET="$ac_cv_prog_WINDRES_FOR_TARGET"
+if test -n "$WINDRES_FOR_TARGET"; then
+ echo "$ac_t""$WINDRES_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_prog_WINDRES_FOR_TARGET" ; then
+ if test $build = $target ; then
+ ncn_cv_WINDRES_FOR_TARGET=$WINDRES_FOR_TARGET
+ # Extract the first word of "windres", so it can be a program name with args.
+set dummy windres; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4368: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$ncn_cv_WINDRES_FOR_TARGET"; then
+ ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET="$ncn_cv_WINDRES_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET="windres"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET" && ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET="windres"
+fi
+fi
+ncn_cv_WINDRES_FOR_TARGET="$ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET"
+if test -n "$ncn_cv_WINDRES_FOR_TARGET"; then
+ echo "$ac_t""$ncn_cv_WINDRES_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ WINDRES_FOR_TARGET=$ncn_cv_WINDRES_FOR_TARGET
+ else
+ WINDRES_FOR_TARGET="${ncn_target_tool_prefix}windres"
+ fi
+else
+ WINDRES_FOR_TARGET="$ac_cv_prog_WINDRES_FOR_TARGET"
+fi
+
+
+
+
+
+
+
+
+
+
+
+# Fix up target tools.
+if test "x${build}" = "x${host}" ; then
+ # In this case, the newly built tools can and should be used,
+ # so we override the results of the autoconf tests.
+ # This should really only happen when the tools are actually being built,
+ # but that's a further refinement. The new build scheme, where
+ # tools are built into a structure paralleling where they're installed,
+ # should also eliminate all of this cleanly.
+ AR_FOR_TARGET="\$(USUAL_AR_FOR_TARGET)"
+ AS_FOR_TARGET="\$(USUAL_AS_FOR_TARGET)"
+ DLLTOOL_FOR_TARGET="\$(USUAL_DLLTOOL_FOR_TARGET)"
+ LD_FOR_TARGET="\$(USUAL_LD_FOR_TARGET)"
+ NM_FOR_TARGET="\$(USUAL_NM_FOR_TARGET)"
+ RANLIB_FOR_TARGET="\$(USUAL_RANLIB_FOR_TARGET)"
+ WINDRES_FOR_TARGET="\$(USUAL_WINDRES_FOR_TARGET)"
+fi
+# Certain tools may need extra flags.
+AR_FOR_TARGET=${AR_FOR_TARGET}${extra_arflags_for_target}
+RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET}${extra_ranlibflags_for_target}
+NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target}
+
+echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
+echo "configure:4435: checking whether to enable maintainer-specific portions of Makefiles" >&5
+# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
+if test "${enable_maintainer_mode+set}" = set; then
+ enableval="$enable_maintainer_mode"
+ USE_MAINTAINER_MODE=$enableval
+else
+ USE_MAINTAINER_MODE=no
+fi
+
+echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
+
+
+if test "$USE_MAINTAINER_MODE" = yes; then
+ MAINTAINER_MODE_TRUE=
+ MAINTAINER_MODE_FALSE='#'
+else
+ MAINTAINER_MODE_TRUE='#'
+ MAINTAINER_MODE_FALSE=
+fi
+MAINT=$MAINTAINER_MODE_TRUE
+
+# ---------------------
+# GCC bootstrap support
+# ---------------------
+
+# Stage specific cflags for build.
+stage1_cflags="-g"
+case $build in
+ vax-*-*)
+ case ${GCC} in
+ yes) stage1_cflags="-g -Wa,-J" ;;
+ *) stage1_cflags="-g -J" ;;
+ esac ;;
+ powerpc-*-darwin*)
+ # The spiffy cpp-precomp chokes on some legitimate constructs in GCC
+ # sources; use -no-cpp-precomp to get to GNU cpp.
+ # Apple's GCC has bugs in designated initializer handling, so disable
+ # that too.
+ stage1_cflags="-g -no-cpp-precomp -DHAVE_DESIGNATED_INITIALIZERS=0"
+ ;;
+esac
+
+
+# Enable -Werror in bootstrap stage2 and later.
+# Change the default to "no" on release branches.
+# Check whether --enable-werror or --disable-werror was given.
+if test "${enable_werror+set}" = set; then
+ enableval="$enable_werror"
+ :
+else
+ enable_werror=yes
+fi
+
+case ${enable_werror} in
+ yes) stage2_werror_flag="--enable-werror-always" ;;
+ *) stage2_werror_flag="" ;;
+esac
+
+
+trap '' 1 2 15
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs. It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already. You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+ case `(ac_space=' '; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
+ # `set' does not quote correctly, so add quotes (double-quote substitution
+ # turns \\\\ into \\, and sed turns \\ into \).
+ sed -n \
+ -e "s/'/'\\\\''/g" \
+ -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+ ;;
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+ ;;
+ esac >> confcache
+if cmp -s $cache_file confcache; then
+ :
+else
+ if test -w $cache_file; then
+ echo "updating cache $cache_file"
+ cat confcache > $cache_file
+ else
+ echo "not updating unwritable cache $cache_file"
+ fi
+fi
+rm -f confcache
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# Any assignment to VPATH causes Sun make to only execute
+# the first set of double-colon rules, so remove it if not needed.
+# If there is a colon in the path, we need to keep it.
+if test "x$srcdir" = x.; then
+ ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d'
+fi
+
+trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
+
+# Transform confdefs.h into DEFS.
+# Protect against shell expansion while executing Makefile rules.
+# Protect against Makefile macro expansion.
+cat > conftest.defs <<\EOF
+s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
+s%[ `~#$^&*(){}\\|;'"<>?]%\\&%g
+s%\[%\\&%g
+s%\]%\\&%g
+s%\$%$$%g
+EOF
+DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
+rm -f conftest.defs
+
+
+# Without the "./", some shells look in PATH for config.status.
+: ${CONFIG_STATUS=./config.status}
+
+echo creating $CONFIG_STATUS
+rm -f $CONFIG_STATUS
+cat > $CONFIG_STATUS <<EOF
+#! /bin/sh
+# Generated automatically by configure.
+# Run this file to recreate the current configuration.
+# This directory was configured as follows,
+# on host `(hostname || uname -n) 2>/dev/null | sed 1q`: