+# Work in distributions that contain no compiler tools, like Autoconf.
+tentative_cc=""
+host_makefile_frag=/dev/null
+if test -d ${srcdir}/config ; then
+case "${host}" in
+ m68k-hp-hpux*)
+ # Avoid "too much defining" errors from HPUX compiler.
+ tentative_cc="cc -Wp,-H256000"
+ # If "ar" in $PATH is GNU ar, the symbol table may need rebuilding.
+ # If it's HP/UX ar, this should be harmless.
+ RANLIB="ar ts"
+ ;;
+ m68k-apollo-sysv*)
+ tentative_cc="cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DUSG"
+ ;;
+ m68k-apollo-bsd*)
+ #None of the Apollo compilers can compile gas or binutils. The preprocessor
+ # chokes on bfd, the compiler won't let you assign integers to enums, and
+ # other problems. Defining CC to gcc is a questionable way to say "don't use
+ # the apollo compiler" (the preferred version of GCC could be called cc,
+ # or whatever), but I'm not sure leaving CC as cc is any better...
+ #CC=cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DNO_STDARG
+ # Used to have BISON=yacc.
+ tentative_cc=gcc
+ ;;
+ m88k-dg-dgux*)
+ tentative_cc="gcc -Wall -ansi -D__using_DGUX"
+ ;;
+ m88k-harris-cxux*)
+ # Under CX/UX, we want to tell the compiler to use ANSI mode.
+ tentative_cc="cc -Xa"
+ host_makefile_frag="config/mh-cxux"
+ ;;
+ m88k-motorola-sysv*)
+ ;;
+ mips*-dec-ultrix*)
+ tentative_cc="cc -Wf,-XNg1000"
+ host_makefile_frag="config/mh-decstation"
+ ;;
+ mips*-nec-sysv4*)
+ # The C compiler on NEC MIPS SVR4 needs bigger tables.
+ tentative_cc="cc -ZXNd=5000 -ZXNg=1000"
+ host_makefile_frag="config/mh-necv4"
+ ;;
+ mips*-sgi-irix4*)
+ # Tell compiler to use K&R C. We can't compile under the SGI Ansi
+ # environment. Also bump switch table size so that cp-parse will
+ # compile. Bump string length limit so linker builds.
+ tentative_cc="cc -cckr -Wf,-XNg1500 -Wf,-XNk1000 -Wf,-XNh2000 -Wf,-XNl8192"
+ ;;
+ mips*-*-sysv4*)
+ host_makefile_frag="config/mh-sysv4"
+ ;;
+ mips*-*-sysv*)
+ # This is for a MIPS running RISC/os 4.52C.
+
+ # This is needed for GDB, but needs to be in the top-level make because
+ # if a library is compiled with the bsd headers and gets linked with the
+ # sysv system libraries all hell can break loose (e.g. a jmp_buf might be
+ # a different size).
+ # ptrace(2) apparently has problems in the BSD environment. No workaround is
+ # known except to select the sysv environment. Could we use /proc instead?
+ # These "sysv environments" and "bsd environments" often end up being a pain.
+ #
+ # This is not part of CFLAGS because perhaps not all C compilers have this
+ # option.
+ tentative_cc="cc -systype sysv"
+ ;;
+ i370-ibm-opened*)
+ tentative_cc="c89"
+ ;;
+ i[3456789]86-*-sysv5*)
+ host_makefile_frag="config/mh-sysv5"
+ ;;
+ i[3456789]86-*-dgux*)
+ tentative_cc="gcc -Wall -ansi -D__using_DGUX"
+ host_makefile_frag="config/mh-dgux386"
+ ;;
+ i[3456789]86-ncr-sysv4.3*)
+ # The MetaWare compiler will generate a copyright message unless you
+ # turn it off by adding the -Hnocopyr flag.
+ tentative_cc="cc -Hnocopyr"
+ ;;
+ i[3456789]86-ncr-sysv4*)
+ # for an NCR 3000 (i486/SVR4) system.
+ # The NCR 3000 ships with a MetaWare compiler installed as /bin/cc.
+ # This compiler not only emits obnoxious copyright messages every time
+ # you run it, but it chokes and dies on a whole bunch of GNU source
+ # files. Default to using the AT&T compiler installed in /usr/ccs/ATT/cc.
+ tentative_cc="/usr/ccs/ATT/cc"
+ host_makefile_frag="config/mh-ncr3000"
+ ;;
+ i[3456789]86-*-sco3.2v5*)
+ ;;
+ i[3456789]86-*-sco*)
+ # The native C compiler botches some simple uses of const. Unfortunately,
+ # it doesn't defined anything like "__sco__" for us to test for in ansidecl.h.
+ tentative_cc="cc -Dconst="
+ host_makefile_frag="config/mh-sco"
+ ;;
+ i[3456789]86-*-udk*)
+ host_makefile_frag="config/mh-sysv5"
+ ;;
+ i[3456789]86-*-solaris2*)
+ host_makefile_frag="config/mh-sysv4"
+ ;;
+ i[3456789]86-*-msdosdjgpp*)
+ host_makefile_frag="config/mh-djgpp"
+ ;;
+ *-cygwin*)
+ host_makefile_frag="config/mh-cygwin"
+ ;;
+ *-mingw32*)
+ host_makefile_frag="config/mh-mingw32"
+ ;;
+ *-interix*)
+ host_makefile_frag="config/mh-interix"
+ ;;
+ vax-*-ultrix2*)
+ # The old BSD pcc isn't up to compiling parts of gdb so use gcc
+ tentative_cc=gcc
+ ;;
+ *-*-solaris2*)
+ host_makefile_frag="config/mh-solaris"
+ ;;
+ m68k-sun-sunos*)
+ # Sun's C compiler needs the -J flag to be able to compile cp-parse.c
+ # without overflowing the jump tables (-J says to use a 32 bit table)
+ tentative_cc="cc -J"
+ ;;
+ *-hp-hpux*)
+ tentative_cc="cc -Wp,-H256000"
+ ;;
+ *-*-hiux*)
+ tentative_cc="cc -Wp,-H256000"
+ ;;
+ rs6000-*-lynxos*)
+ # /bin/cc is less than useful for our purposes. Always use GCC
+ tentative_cc="/usr/cygnus/progressive/bin/gcc"
+ host_makefile_frag="config/mh-lynxrs6k"
+ ;;
+ *-*-lynxos*)
+ # /bin/cc is less than useful for our purposes. Always use GCC
+ tentative_cc="/bin/gcc"
+ ;;
+ *-*-sysv4*)
+ host_makefile_frag="config/mh-sysv4"
+ ;;
+esac
+fi
+
+# If we aren't going to be using gcc, see if we can extract a definition
+# of CC from the fragment.
+# Actually, use the 'pre-extracted' version above.
+if test -z "${CC}" && test "${build}" = "${host}" ; then
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
+ found=
+ for dir in $PATH; do
+ test -z "$dir" && dir=.
+ if test -f $dir/gcc; then
+ found=yes
+ break
+ fi
+ done
+ IFS="$save_ifs"
+ if test -z "${found}" && test -n "${tentative_cc}" ; then
+ CC=$tentative_cc
+ fi
+fi
+
+if test "${build}" != "${host}" ; then
+ # If we are doing a Canadian Cross, in which the host and build systems
+ # are not the same, we set reasonable default values for the tools.
+
+ BISON=${BISON-bison}
+ CC=${CC-${host_alias}-gcc}
+ CFLAGS=${CFLAGS-"-g -O2"}
+ CXX=${CXX-${host_alias}-c++}
+ CXXFLAGS=${CXXFLAGS-"-g -O2"}
+ CC_FOR_BUILD=${CC_FOR_BUILD-gcc}
+ CC_FOR_TARGET=${CC_FOR_TARGET-${target_alias}-gcc}
+ CXX_FOR_TARGET=${CXX_FOR_TARGET-${target_alias}-c++}
+ GCJ_FOR_TARGET=${GCJ_FOR_TARGET-${target_alias}-gcj}
+ GCC_FOR_TARGET=${GCC_FOR_TARGET-${CC_FOR_TARGET-${target_alias}-gcc}}
+ BUILD_PREFIX=${build_alias}-
+ BUILD_PREFIX_1=${build_alias}-
+ MAKEINFO=${MAKEINFO-makeinfo}
+
+ if test -z "${YACC}" ; then
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
+ for dir in $PATH; do
+ test -z "$dir" && dir=.
+ if test -f $dir/bison; then
+ YACC="bison -y"
+ break
+ fi
+ if test -f $dir/byacc; then
+ YACC=byacc
+ break
+ fi
+ if test -f $dir/yacc; then
+ YACC=yacc
+ break
+ fi
+ done
+ IFS="$save_ifs"
+ if test -z "${YACC}" ; then
+ YACC="bison -y"
+ fi
+ fi
+
+ if test -z "${LEX}" ; then
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
+ for dir in $PATH; do
+ test -z "$dir" && dir=.
+ if test -f $dir/flex; then
+ LEX=flex
+ break
+ fi
+ if test -f $dir/lex; then
+ LEX=lex
+ break
+ fi
+ done
+ IFS="$save_ifs"
+ LEX=${LEX-flex}
+ fi
+
+else
+ # Set reasonable default values for some tools even if not Canadian.
+ # Of course, these are different reasonable default values, originally
+ # specified directly in the Makefile.
+ # We don't export, so that autoconf can do its job.
+ # Note that all these settings are above the fragment inclusion point
+ # in Makefile.in, so can still be overridden by fragments.
+ # This is all going to change when we autoconfiscate...
+
+ BISON="\$(USUAL_BISON)"
+ CC_FOR_BUILD="\$(CC)"
+ GCC_FOR_TARGET="\$(USUAL_GCC_FOR_TARGET)"
+ BUILD_PREFIX=
+ BUILD_PREFIX_1=loser-
+ MAKEINFO="\$(USUAL_MAKEINFO)"
+ LEX="\$(USUAL_LEX)"
+ YACC="\$(USUAL_YACC)"
+
+ # If CC is still not set, try to get gcc.
+ cc_prog_is_gcc=
+ if test -z "${CC}" ; then
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
+ for dir in $PATH; do
+ test -z "$dir" && dir=.
+ if test -f $dir/gcc; then
+ CC="gcc"
+ cc_prog_is_gcc=yes
+ echo 'void f(){}' > conftest.c
+ if test -z "`${CC} -g -c conftest.c 2>&1`"; then
+ CFLAGS=${CFLAGS-"-g -O2"}
+ CXXFLAGS=${CXXFLAGS-"-g -O2"}
+ else
+ CFLAGS=${CFLAGS-"-O2"}
+ CXXFLAGS=${CXXFLAGS-"-O2"}
+ fi
+ rm -f conftest*
+ break
+ fi
+ done
+ IFS="$save_ifs"
+ CC=${CC-cc}
+ else
+ # Determine if we are using gcc.
+ cat > conftest.c <<EOF
+#ifdef __GNUC__
+ yes;
+#endif
+EOF
+ if ${CC} -E conftest.c | grep yes >/dev/null 2>&1; then
+ cc_prog_is_gcc=yes
+ fi
+ rm -f conftest.c
+ if test -z "${CFLAGS}"; then
+ # Here CC is set but CFLAGS is not. Use a quick hack to use -O2 if CC
+ # is set to a version of gcc.
+ if test "$cc_prog_is_gcc" = yes; then
+ echo 'void f(){}' > conftest.c
+ if test -z "`${CC} -g -c conftest.c 2>&1`"; then
+ CFLAGS=${CFLAGS-"-g -O2"}
+ CXXFLAGS=${CXXFLAGS-"-g -O2"}
+ else
+ CFLAGS=${CFLAGS-"-O2"}
+ CXXFLAGS=${CXXFLAGS-"-O2"}
+ fi
+ rm -f conftest*
+ fi
+ fi
+ fi
+
+ # We must set the default linker to the linker used by gcc for the correct
+ # operation of libtool. If LD is not defined and we are using gcc, try to
+ # set the LD default to the ld used by gcc.
+ if test -z "$LD"; then
+ if test "$cc_prog_is_gcc" = yes; then
+ case $build in
+ *-*-mingw*)
+ gcc_prog_ld=`$CC -print-prog-name=ld 2>&1 | tr -d '\015'` ;;
+ *)
+ gcc_prog_ld=`$CC -print-prog-name=ld 2>&1` ;;
+ esac
+ case $gcc_prog_ld in
+ # Accept absolute paths.
+ [\\/]* | [A-Za-z]:[\\/]*)
+ LD="$gcc_prog_ld" ;;
+ esac
+ fi
+ fi
+
+ CXX=${CXX-"c++"}
+ CFLAGS=${CFLAGS-"-g"}
+ CXXFLAGS=${CXXFLAGS-"-g -O2"}
+fi
+
+if test $host != $build; then
+ ac_tool_prefix=${host_alias}-
+else
+ ac_tool_prefix=
+fi
+
+# Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1858: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CC="gcc"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1888: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_prog_rejected=no
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# -gt 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ set dummy "$ac_dir/$ac_word" "$@"
+ shift
+ ac_cv_prog_CC="$@"
+ fi
+fi
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ if test -z "$CC"; then
+ case "`uname -s`" in
+ *win32* | *WIN32*)
+ # Extract the first word of "cl", so it can be a program name with args.
+set dummy cl; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1939: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CC="cl"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+ ;;
+ esac
+ fi
+ test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
+echo "configure:1971: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+cat > conftest.$ac_ext << EOF
+
+#line 1982 "configure"
+#include "confdefs.h"
+
+main(){return(0);}
+EOF
+if { (eval echo configure:1987: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ ac_cv_prog_cc_works=yes
+ # If we can't run a trivial program, we are probably using a cross compiler.
+ if (./conftest; exit) 2>/dev/null; then
+ ac_cv_prog_cc_cross=no
+ else
+ ac_cv_prog_cc_cross=yes
+ fi
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ ac_cv_prog_cc_works=no
+fi
+rm -fr conftest*
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
+if test $ac_cv_prog_cc_works = no; then
+ { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
+fi
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
+echo "configure:2013: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
+cross_compiling=$ac_cv_prog_cc_cross
+
+echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
+echo "configure:2018: checking whether we are using GNU C" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.c <<EOF
+#ifdef __GNUC__
+ yes;
+#endif
+EOF
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2027: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+ ac_cv_prog_gcc=yes
+else
+ ac_cv_prog_gcc=no
+fi
+fi
+
+echo "$ac_t""$ac_cv_prog_gcc" 1>&6
+
+if test $ac_cv_prog_gcc = yes; then
+ GCC=yes
+else
+ GCC=
+fi
+
+ac_test_CFLAGS="${CFLAGS+set}"
+ac_save_CFLAGS="$CFLAGS"
+CFLAGS=
+echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+echo "configure:2046: checking whether ${CC-cc} accepts -g" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ echo 'void f(){}' > conftest.c
+if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
+ ac_cv_prog_cc_g=yes
+else
+ ac_cv_prog_cc_g=no
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
+if test "$ac_test_CFLAGS" = set; then
+ CFLAGS="$ac_save_CFLAGS"
+elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-g"
+ fi
+else
+ if test "$GCC" = yes; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=
+ fi
+fi