+dir ${makesrcdir}
+dir .
+source ${makesrcdir}/.gdbinit
+EOF
+ ;;
+ esac
+ fi
+
+ # Install a makefile, and make it set VPATH
+ # if necessary so that the sources are found.
+ # Also change its value of srcdir.
+ # NOTE: Makefile generation constitutes the majority of the time in configure. Hence, this section has
+ # been somewhat optimized and is perhaps a bit twisty.
+
+ # code is order so as to try to sed the smallest input files we know.
+ # so do these separately because I don't trust the order of sed -e expressions.
+
+ # the five makefile fragments MUST end up in the resulting Makefile in this order:
+ # package macros, target, host, site, and package rules.
+
+ if [ -f ${srcdir}/${subdir}/${Makefile_in} ] ; then
+
+ # Conditionalize the makefile for this package from "Makefile.in" (or whatever it's called) into Makefile.tem.
+ rm -f ${subdir}/${Makefile}.tem
+ case "${package_makefile_rules_frag}" in
+ "") cp ${srcdir}/${subdir}/${Makefile_in} ${subdir}/Makefile.tem ;;
+ *)
+ if [ ! -f ${package_makefile_rules_frag} ] ; then
+ package_makefile_rules_frag=${srcdir}/${package_makefile_rules_frag}
+ fi
+ if [ -f ${package_makefile_rules_frag} ] ; then
+ sed -e "/^####/ r ${package_makefile_rules_frag}" ${srcdir}/${subdir}/${Makefile_in} > ${Makefile}.tem
+ else
+ echo '***' Expected package makefile rules fragment \"${package_makefile_rules_frag}\" 1>&2
+ echo '***' is missing in ${PWD=`pwd`}. 1>&2
+ cp ${srcdir}/${subdir}/${Makefile_in} ${subdir}/Makefile.tem
+ fi
+ esac
+ # working copy now in ${Makefile}.tem
+
+ # Conditionalize for this site.
+ rm -f ${Makefile}
+ case "${site}" in
+ "") mv ${subdir}/Makefile.tem ${Makefile} ;;
+ *)
+ site_makefile_frag=${srcdir}/config/ms-${site}
+
+ if [ -f ${site_makefile_frag} ] ; then
+ sed -e "/^####/ r ${site_makefile_frag}" ${subdir}/Makefile.tem \
+ > ${Makefile}
+ else
+ mv ${subdir}/Makefile.tem ${Makefile}
+ site_makefile_frag=
+ fi
+ ;;
+ esac
+ # working copy now in ${Makefile}
+
+ # Conditionalize the makefile for this host.
+ rm -f ${subdir}/Makefile.tem
+ case "${host_makefile_frag}" in
+ "") mv ${Makefile} ${subdir}/Makefile.tem ;;
+ *)
+ if [ ! -f ${host_makefile_frag} ] ; then
+ host_makefile_frag=${srcdir}/${host_makefile_frag}
+ fi
+ if [ -f ${host_makefile_frag} ] ; then
+ sed -e "/^####/ r ${host_makefile_frag}" ${Makefile} > ${subdir}/Makefile.tem
+ else
+ echo '***' Expected host makefile fragment \"${host_makefile_frag}\" 1>&2
+ echo '***' is missing in ${PWD=`pwd`}. 1>&2
+ mv ${Makefile} ${subdir}/Makefile.tem
+ fi
+ esac
+ # working copy now in ${subdir)/Makefile.tem
+
+ # Conditionalize the makefile for this target.
+ rm -f ${Makefile}
+ case "${target_makefile_frag}" in
+ "") mv ${subdir}/Makefile.tem ${Makefile} ;;
+ *)
+ if [ ! -f ${target_makefile_frag} ] ; then
+ target_makefile_frag=${srcdir}/${target_makefile_frag}
+ fi
+ if [ -f ${target_makefile_frag} ] ; then
+ sed -e "/^####/ r ${target_makefile_frag}" ${subdir}/Makefile.tem > ${Makefile}
+ else
+ mv ${subdir}/Makefile.tem ${Makefile}
+ target_makefile_frag=
+ fi
+ ;;
+ esac
+ # working copy now in ${Makefile}
+
+ # Emit the default values of this package's macros.
+ rm -f ${subdir}/Makefile.tem
+ case "${package_makefile_frag}" in
+ "") mv ${Makefile} ${subdir}/Makefile.tem ;;
+ *)
+ if [ ! -f ${package_makefile_frag} ] ; then
+ package_makefile_frag=${srcdir}/${package_makefile_frag}
+ fi
+ if [ -f ${package_makefile_frag} ] ; then
+ sed -e "/^####/ r ${package_makefile_frag}" ${Makefile} > ${subdir}/Makefile.tem
+ else
+ echo '***' Expected package makefile fragment \"${package_makefile_rules_frag}\" 1>&2
+ echo '***' is missing in ${PWD=`pwd`}. 1>&2
+ mv ${Makefile} ${subdir}/Makefile.tem
+ fi
+ esac
+ # real copy now in ${subdir}/Makefile.tem
+
+ # prepend warning about editting, and a bunch of variables.
+ rm -f ${Makefile}
+ cat > ${Makefile} <<EOF
+# ${NO_EDIT}
+VPATH = ${makesrcdir}
+links = ${configlinks}
+host_alias = ${host_alias}
+host_cpu = ${host_cpu}
+host_vendor = ${host_vendor}
+host_os = ${host_os}
+host_canonical = ${host_cpu}-${host_vendor}-${host_os}
+target_alias = ${target_alias}
+target_cpu = ${target_cpu}
+target_vendor = ${target_vendor}
+target_os = ${target_os}
+target_canonical = ${target_cpu}-${target_vendor}-${target_os}
+EOF
+ case "${build}" in
+ "") ;;
+ *) cat >> ${Makefile} << EOF
+build_alias = ${build_alias}
+build_cpu = ${build_cpu}
+build_vendor = ${build_vendor}
+build_os = ${build_os}
+build_canonical = ${build_cpu}-${build_vendor}-${build_os}
+EOF
+ esac
+
+ case "${package_makefile_frag}" in
+ "") ;;
+ /*) echo package_makefile_frag = ${package_makefile_frag} >>${Makefile} ;;
+ *) echo package_makefile_frag = ${invsubdir}${package_makefile_frag} >>${Makefile} ;;
+ esac
+
+ case "${target_makefile_frag}" in
+ "") ;;
+ /*) echo target_makefile_frag = ${target_makefile_frag} >>${Makefile} ;;
+ *) echo target_makefile_frag = ${invsubdir}${target_makefile_frag} >>${Makefile} ;;
+ esac
+
+ case "${host_makefile_frag}" in
+ "") ;;
+ /*) echo host_makefile_frag = ${host_makefile_frag} >>${Makefile} ;;
+ *) echo host_makefile_frag = ${invsubdir}${host_makefile_frag} >>${Makefile} ;;
+ esac
+
+ if [ "${site_makefile_frag}" != "" ] ; then
+ echo site_makefile_frag = ${invsubdir}${site_makefile_frag} >>${Makefile}
+ fi
+
+ # record if we want to build shared libs.
+ if test -z "${enable_shared}"; then
+ echo enable_shared = no >> ${Makefile}
+ else
+ echo enable_shared = ${enable_shared} >> ${Makefile}
+ fi
+ # record if we want to rumtime library stuff installed in libsubdir.
+ if test -z "${enable_version_specific_runtime_libs}"; then
+ echo enable_version_specific_runtime_libs = no >> ${Makefile}
+ else
+ echo enable_version_specific_runtime_libs = ${enable_version_specific_runtime_libs} >> ${Makefile}
+ fi
+
+ # Emit a macro which describes the file containing gcc's
+ # version number.
+ echo gcc_version_trigger = ${gcc_version_trigger} >> ${Makefile}
+ # And emit a macro defining gcc's version number.
+ echo gcc_version = ${gcc_version} >> ${Makefile}
+
+ # reset prefix, exec_prefix, srcdir, SUBDIRS, NONSUBDIRS,
+ # remove any form feeds.
+ if [ -z "${subdirs}" ]; then
+ rm -f ${subdir}/Makefile.tm2
+ sed -e "s:^SUBDIRS[ ]*=.*$:SUBDIRS = ${configdirs}:" \
+ -e "s:^NONSUBDIRS[ ]*=.*$:NONSUBDIRS = ${noconfigdirs}:" \
+ ${subdir}/Makefile.tem > ${subdir}/Makefile.tm2
+ rm -f ${subdir}/Makefile.tem
+ mv ${subdir}/Makefile.tm2 ${subdir}/Makefile.tem
+ fi
+ sed -e "s|^prefix[ ]*=.*$|prefix = ${prefix}|" \
+ -e "s|^exec_prefix[ ]*=.*$|exec_prefix = ${exec_prefix}|" \
+ -e "s|^bindir[ ]*=.*$|bindir = ${bindir}|" \
+ -e "s|^sbindir[ ]*=.*$|sbindir = ${sbindir}|" \
+ -e "s|^libexecdir[ ]*=.*$|libexecdir = ${libexecdir}|" \
+ -e "s|^datadir[ ]*=.*$|datadir = ${datadir}|" \
+ -e "s|^sysconfdir[ ]*=.*$|sysconfdir = ${sysconfdir}|" \
+ -e "s|^sharedstatedir[ ]*=.*$|sharedstatedir = ${sharedstatedir}|" \
+ -e "s|^localstatedir[ ]*=.*$|localstatedir = ${localstatedir}|" \
+ -e "s|^libdir[ ]*=.*$|libdir = ${libdir}|" \
+ -e "s|^includedir[ ]*=.*$|includedir = ${includedir}|" \
+ -e "s|^oldincludedir[ ]*=.*$|oldincludedir = ${oldincludedir}|" \
+ -e "s|^infodir[ ]*=.*$|infodir = ${infodir}|" \
+ -e "s|^mandir[ ]*=.*$|mandir = ${mandir}|" \
+ -e "/^CC[ ]*=/{
+ :loop1
+ /\\\\$/ N
+ s/\\\\\\n//g
+ t loop1
+ s%^CC[ ]*=.*$%CC = ${CC}%
+ }" \
+ -e "/^CXX[ ]*=/{
+ :loop2
+ /\\\\$/ N
+ s/\\\\\\n//g
+ t loop2
+ s%^CXX[ ]*=.*$%CXX = ${CXX}%
+ }" \
+ -e "/^CFLAGS[ ]*=/{
+ :loop3
+ /\\\\$/ N
+ s/\\\\\\n//g
+ t loop3
+ s%^CFLAGS[ ]*=.*$%CFLAGS = ${CFLAGS}%
+ }" \
+ -e "/^CXXFLAGS[ ]*=/{
+ :loop4
+ /\\\\$/ N
+ s/\\\\\\n//g
+ t loop4
+ s%^CXXFLAGS[ ]*=.*$%CXXFLAGS = ${CXXFLAGS}%
+ }" \
+ -e "s|^SHELL[ ]*=.*$|SHELL = ${config_shell}|" \
+ -e "s|^srcdir[ ]*=.*$|srcdir = ${makesrcdir}|" \
+ -e "s/\f//" \
+ -e "s:^program_prefix[ ]*=.*$:program_prefix = ${program_prefix}:" \
+ -e "s:^program_suffix[ ]*=.*$:program_suffix = ${program_suffix}:" \
+ -e "s:^program_transform_name[ ]*=.*$:program_transform_name = ${program_transform_name}:" \
+ -e "s|^tooldir[ ]*=.*$|tooldir = ${tooldir}|" \
+ -e "s:^DEFAULT_YACC[ ]*=.*$:DEFAULT_YACC = ${DEFAULT_YACC}:" \
+ -e "s:^DEFAULT_LEX[ ]*=.*$:DEFAULT_LEX = ${DEFAULT_LEX}:" \
+ -e "s:^DEFAULT_M4[ ]*=.*$:DEFAULT_M4 = ${DEFAULT_M4}:" \
+ ${subdir}/Makefile.tem >> ${Makefile}
+
+
+ # If this is a Canadian Cross, preset the values of many more
+ # tools.
+ if [ "${build}" != "${host}" ]; then
+ for var in ${tools}; do
+ val=`eval 'echo $'"${var}"`
+ sed -e "/^${var}[ ]*=/{
+ :loop1
+ /\\\\$/ N
+ /\\\\$/ b loop1
+ s/\\\\\\n//g
+ s%^${var}[ ]*=.*$%${var} = ${val}%
+ }" ${Makefile} > ${Makefile}.tem
+ mv -f ${Makefile}.tem ${Makefile}
+ done
+ fi
+
+ # final copy now in ${Makefile}
+
+ else
+ echo "No Makefile.in found in ${srcdir}/${subdir}, unable to configure" 1>&2
+ fi
+
+ rm -f ${subdir}/Makefile.tem
+
+ case "${host_makefile_frag}" in
+ "") using= ;;
+ *) using="and \"${host_makefile_frag}\"" ;;
+ esac
+
+ case "${target_makefile_frag}" in
+ "") ;;
+ *) using="${using} and \"${target_makefile_frag}\"" ;;
+ esac
+
+ case "${site_makefile_frag}" in
+ "") ;;
+ *) using="${using} and \"${site_makefile_frag}\"" ;;
+ esac
+
+ newusing=`echo "${using}" | sed 's/and/using/'`
+ using=${newusing}
+ echo "Created \"${Makefile}\" in" ${PWD=`pwd`} ${using}
+
+ . ${tmpfile}.pos
+
+ # describe the chosen configuration in config.status.
+ # Make that file a shellscript which will reestablish
+ # the same configuration. Used in Makefiles to rebuild
+ # Makefiles.
+
+ case "${norecursion}" in
+ "") arguments="${arguments} --norecursion" ;;
+ *) ;;
+ esac
+
+ if [ ${subdir} = . ] ; then
+ echo "#!/bin/sh
+# ${NO_EDIT}
+# This directory was configured as follows: