+
+if test -z "$ac_cv_prog_LD_FOR_TARGET"; then
+ for ncn_progname in ld; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_LD_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$LD_FOR_TARGET"; then
+ ac_cv_prog_LD_FOR_TARGET="$LD_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_LD_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+LD_FOR_TARGET=$ac_cv_prog_LD_FOR_TARGET
+if test -n "$LD_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $LD_FOR_TARGET" >&5
+echo "${ECHO_T}$LD_FOR_TARGET" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ fi
+ if test -z "$ac_cv_prog_LD_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_LD_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$LD_FOR_TARGET"; then
+ ac_cv_prog_LD_FOR_TARGET="$LD_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_LD_FOR_TARGET="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+LD_FOR_TARGET=$ac_cv_prog_LD_FOR_TARGET
+if test -n "$LD_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $LD_FOR_TARGET" >&5
+echo "${ECHO_T}$LD_FOR_TARGET" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_LD_FOR_TARGET" && break
+ done
+fi
+
+if test -z "$ac_cv_prog_LD_FOR_TARGET" ; then
+ set dummy ld
+ if test $build = $target ; then
+ LD_FOR_TARGET="$2"
+ else
+ LD_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ fi
+fi
+
+else
+ LD_FOR_TARGET=$ac_cv_path_LD_FOR_TARGET
+fi
+
+
+
+
+if test -z "$ac_cv_path_LIPO_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ echo "$as_me:$LINENO: checking for lipo in $with_build_time_tools" >&5
+echo $ECHO_N "checking for lipo in $with_build_time_tools... $ECHO_C" >&6
+ if test -x $with_build_time_tools/lipo; then
+ LIPO_FOR_TARGET=`cd $with_build_time_tools && pwd`/lipo
+ ac_cv_path_LIPO_FOR_TARGET=$LIPO_FOR_TARGET
+ echo "$as_me:$LINENO: result: $ac_cv_path_LIPO_FOR_TARGET" >&5
+echo "${ECHO_T}$ac_cv_path_LIPO_FOR_TARGET" >&6
+ else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+ fi
+ elif test $build != $host && test $have_gcc_for_target = yes; then
+ LIPO_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=lipo`
+ test $LIPO_FOR_TARGET=lipo && LIPO_FOR_TARGET=
+ ac_cv_path_LIPO_FOR_TARGET=$LIPO_FOR_TARGET
+ fi
+fi
+if test -z "$ac_cv_path_LIPO_FOR_TARGET" && test -n "$gcc_cv_tool_dirs"; then
+ # Extract the first word of "lipo", so it can be a program name with args.
+set dummy lipo; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_path_LIPO_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ case $LIPO_FOR_TARGET in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_LIPO_FOR_TARGET="$LIPO_FOR_TARGET" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $gcc_cv_tool_dirs
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_LIPO_FOR_TARGET="$as_dir/$ac_word$ac_exec_ext"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+ ;;
+esac
+fi
+LIPO_FOR_TARGET=$ac_cv_path_LIPO_FOR_TARGET
+
+if test -n "$LIPO_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $LIPO_FOR_TARGET" >&5
+echo "${ECHO_T}$LIPO_FOR_TARGET" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_path_LIPO_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in lipo; do
+ echo "$as_me:$LINENO: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo $ECHO_N "checking for ${ncn_progname} in $with_build_time_tools... $ECHO_C" >&6
+ if test -x $with_build_time_tools/${ncn_progname}; then
+ ac_cv_prog_LIPO_FOR_TARGET=$with_build_time_tools/${ncn_progname}
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+ break
+ else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_LIPO_FOR_TARGET"; then
+ for ncn_progname in lipo; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_LIPO_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$LIPO_FOR_TARGET"; then
+ ac_cv_prog_LIPO_FOR_TARGET="$LIPO_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_LIPO_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+LIPO_FOR_TARGET=$ac_cv_prog_LIPO_FOR_TARGET
+if test -n "$LIPO_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $LIPO_FOR_TARGET" >&5
+echo "${ECHO_T}$LIPO_FOR_TARGET" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ fi
+ if test -z "$ac_cv_prog_LIPO_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_LIPO_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$LIPO_FOR_TARGET"; then
+ ac_cv_prog_LIPO_FOR_TARGET="$LIPO_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_LIPO_FOR_TARGET="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+LIPO_FOR_TARGET=$ac_cv_prog_LIPO_FOR_TARGET
+if test -n "$LIPO_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $LIPO_FOR_TARGET" >&5
+echo "${ECHO_T}$LIPO_FOR_TARGET" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_LIPO_FOR_TARGET" && break
+ done
+fi
+
+if test -z "$ac_cv_prog_LIPO_FOR_TARGET" ; then
+ set dummy lipo
+ if test $build = $target ; then
+ LIPO_FOR_TARGET="$2"
+ else
+ LIPO_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ fi
+fi
+
+else
+ LIPO_FOR_TARGET=$ac_cv_path_LIPO_FOR_TARGET
+fi
+
+
+
+
+if test -z "$ac_cv_path_NM_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ echo "$as_me:$LINENO: checking for nm in $with_build_time_tools" >&5
+echo $ECHO_N "checking for nm in $with_build_time_tools... $ECHO_C" >&6
+ if test -x $with_build_time_tools/nm; then
+ NM_FOR_TARGET=`cd $with_build_time_tools && pwd`/nm
+ ac_cv_path_NM_FOR_TARGET=$NM_FOR_TARGET
+ echo "$as_me:$LINENO: result: $ac_cv_path_NM_FOR_TARGET" >&5
+echo "${ECHO_T}$ac_cv_path_NM_FOR_TARGET" >&6
+ else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+ fi
+ elif test $build != $host && test $have_gcc_for_target = yes; then
+ NM_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=nm`
+ test $NM_FOR_TARGET=nm && NM_FOR_TARGET=
+ ac_cv_path_NM_FOR_TARGET=$NM_FOR_TARGET
+ fi
+fi
+if test -z "$ac_cv_path_NM_FOR_TARGET" && test -n "$gcc_cv_tool_dirs"; then
+ # Extract the first word of "nm", so it can be a program name with args.
+set dummy nm; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_path_NM_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ case $NM_FOR_TARGET in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_NM_FOR_TARGET="$NM_FOR_TARGET" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $gcc_cv_tool_dirs
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_NM_FOR_TARGET="$as_dir/$ac_word$ac_exec_ext"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+ ;;
+esac
+fi
+NM_FOR_TARGET=$ac_cv_path_NM_FOR_TARGET
+
+if test -n "$NM_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $NM_FOR_TARGET" >&5
+echo "${ECHO_T}$NM_FOR_TARGET" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_path_NM_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in nm; do
+ echo "$as_me:$LINENO: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo $ECHO_N "checking for ${ncn_progname} in $with_build_time_tools... $ECHO_C" >&6
+ if test -x $with_build_time_tools/${ncn_progname}; then
+ ac_cv_prog_NM_FOR_TARGET=$with_build_time_tools/${ncn_progname}
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+ break
+ else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_NM_FOR_TARGET"; then
+ for ncn_progname in nm; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_NM_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$NM_FOR_TARGET"; then
+ ac_cv_prog_NM_FOR_TARGET="$NM_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_NM_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+NM_FOR_TARGET=$ac_cv_prog_NM_FOR_TARGET
+if test -n "$NM_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $NM_FOR_TARGET" >&5
+echo "${ECHO_T}$NM_FOR_TARGET" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ fi
+ if test -z "$ac_cv_prog_NM_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_NM_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$NM_FOR_TARGET"; then
+ ac_cv_prog_NM_FOR_TARGET="$NM_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_NM_FOR_TARGET="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+NM_FOR_TARGET=$ac_cv_prog_NM_FOR_TARGET
+if test -n "$NM_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $NM_FOR_TARGET" >&5
+echo "${ECHO_T}$NM_FOR_TARGET" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_NM_FOR_TARGET" && break
+ done
+fi
+
+if test -z "$ac_cv_prog_NM_FOR_TARGET" ; then
+ set dummy nm
+ if test $build = $target ; then
+ NM_FOR_TARGET="$2"
+ else
+ NM_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ fi
+fi
+
+else
+ NM_FOR_TARGET=$ac_cv_path_NM_FOR_TARGET
+fi
+
+
+
+
+if test -z "$ac_cv_path_OBJDUMP_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ echo "$as_me:$LINENO: checking for objdump in $with_build_time_tools" >&5
+echo $ECHO_N "checking for objdump in $with_build_time_tools... $ECHO_C" >&6
+ if test -x $with_build_time_tools/objdump; then
+ OBJDUMP_FOR_TARGET=`cd $with_build_time_tools && pwd`/objdump
+ ac_cv_path_OBJDUMP_FOR_TARGET=$OBJDUMP_FOR_TARGET
+ echo "$as_me:$LINENO: result: $ac_cv_path_OBJDUMP_FOR_TARGET" >&5
+echo "${ECHO_T}$ac_cv_path_OBJDUMP_FOR_TARGET" >&6
+ else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+ fi
+ elif test $build != $host && test $have_gcc_for_target = yes; then
+ OBJDUMP_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=objdump`
+ test $OBJDUMP_FOR_TARGET=objdump && OBJDUMP_FOR_TARGET=
+ ac_cv_path_OBJDUMP_FOR_TARGET=$OBJDUMP_FOR_TARGET
+ fi
+fi
+if test -z "$ac_cv_path_OBJDUMP_FOR_TARGET" && test -n "$gcc_cv_tool_dirs"; then
+ # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_path_OBJDUMP_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ case $OBJDUMP_FOR_TARGET in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_OBJDUMP_FOR_TARGET="$OBJDUMP_FOR_TARGET" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $gcc_cv_tool_dirs
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_OBJDUMP_FOR_TARGET="$as_dir/$ac_word$ac_exec_ext"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+ ;;
+esac
+fi
+OBJDUMP_FOR_TARGET=$ac_cv_path_OBJDUMP_FOR_TARGET
+
+if test -n "$OBJDUMP_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $OBJDUMP_FOR_TARGET" >&5
+echo "${ECHO_T}$OBJDUMP_FOR_TARGET" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_path_OBJDUMP_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in objdump; do
+ echo "$as_me:$LINENO: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo $ECHO_N "checking for ${ncn_progname} in $with_build_time_tools... $ECHO_C" >&6
+ if test -x $with_build_time_tools/${ncn_progname}; then
+ ac_cv_prog_OBJDUMP_FOR_TARGET=$with_build_time_tools/${ncn_progname}
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+ break
+ else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_OBJDUMP_FOR_TARGET"; then
+ for ncn_progname in objdump; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_OBJDUMP_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$OBJDUMP_FOR_TARGET"; then
+ ac_cv_prog_OBJDUMP_FOR_TARGET="$OBJDUMP_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_OBJDUMP_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+OBJDUMP_FOR_TARGET=$ac_cv_prog_OBJDUMP_FOR_TARGET
+if test -n "$OBJDUMP_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $OBJDUMP_FOR_TARGET" >&5
+echo "${ECHO_T}$OBJDUMP_FOR_TARGET" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ fi
+ if test -z "$ac_cv_prog_OBJDUMP_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_OBJDUMP_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$OBJDUMP_FOR_TARGET"; then
+ ac_cv_prog_OBJDUMP_FOR_TARGET="$OBJDUMP_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_OBJDUMP_FOR_TARGET="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+OBJDUMP_FOR_TARGET=$ac_cv_prog_OBJDUMP_FOR_TARGET
+if test -n "$OBJDUMP_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $OBJDUMP_FOR_TARGET" >&5
+echo "${ECHO_T}$OBJDUMP_FOR_TARGET" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_OBJDUMP_FOR_TARGET" && break
+ done
+fi
+
+if test -z "$ac_cv_prog_OBJDUMP_FOR_TARGET" ; then
+ set dummy objdump
+ if test $build = $target ; then
+ OBJDUMP_FOR_TARGET="$2"
+ else
+ OBJDUMP_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ fi
+fi
+
+else
+ OBJDUMP_FOR_TARGET=$ac_cv_path_OBJDUMP_FOR_TARGET
+fi
+
+
+
+
+if test -z "$ac_cv_path_RANLIB_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ echo "$as_me:$LINENO: checking for ranlib in $with_build_time_tools" >&5
+echo $ECHO_N "checking for ranlib in $with_build_time_tools... $ECHO_C" >&6
+ if test -x $with_build_time_tools/ranlib; then
+ RANLIB_FOR_TARGET=`cd $with_build_time_tools && pwd`/ranlib
+ ac_cv_path_RANLIB_FOR_TARGET=$RANLIB_FOR_TARGET
+ echo "$as_me:$LINENO: result: $ac_cv_path_RANLIB_FOR_TARGET" >&5
+echo "${ECHO_T}$ac_cv_path_RANLIB_FOR_TARGET" >&6
+ else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+ fi
+ elif test $build != $host && test $have_gcc_for_target = yes; then
+ RANLIB_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=ranlib`
+ test $RANLIB_FOR_TARGET=ranlib && RANLIB_FOR_TARGET=
+ ac_cv_path_RANLIB_FOR_TARGET=$RANLIB_FOR_TARGET
+ fi
+fi
+if test -z "$ac_cv_path_RANLIB_FOR_TARGET" && test -n "$gcc_cv_tool_dirs"; then
+ # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_path_RANLIB_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ case $RANLIB_FOR_TARGET in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_RANLIB_FOR_TARGET="$RANLIB_FOR_TARGET" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $gcc_cv_tool_dirs
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_RANLIB_FOR_TARGET="$as_dir/$ac_word$ac_exec_ext"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+ ;;
+esac
+fi
+RANLIB_FOR_TARGET=$ac_cv_path_RANLIB_FOR_TARGET
+
+if test -n "$RANLIB_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $RANLIB_FOR_TARGET" >&5
+echo "${ECHO_T}$RANLIB_FOR_TARGET" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_path_RANLIB_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in ranlib; do
+ echo "$as_me:$LINENO: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo $ECHO_N "checking for ${ncn_progname} in $with_build_time_tools... $ECHO_C" >&6
+ if test -x $with_build_time_tools/${ncn_progname}; then
+ ac_cv_prog_RANLIB_FOR_TARGET=$with_build_time_tools/${ncn_progname}
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+ break
+ else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_RANLIB_FOR_TARGET"; then
+ for ncn_progname in ranlib; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_RANLIB_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$RANLIB_FOR_TARGET"; then
+ ac_cv_prog_RANLIB_FOR_TARGET="$RANLIB_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_RANLIB_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+RANLIB_FOR_TARGET=$ac_cv_prog_RANLIB_FOR_TARGET
+if test -n "$RANLIB_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $RANLIB_FOR_TARGET" >&5
+echo "${ECHO_T}$RANLIB_FOR_TARGET" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ fi
+ if test -z "$ac_cv_prog_RANLIB_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_RANLIB_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$RANLIB_FOR_TARGET"; then
+ ac_cv_prog_RANLIB_FOR_TARGET="$RANLIB_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_RANLIB_FOR_TARGET="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+RANLIB_FOR_TARGET=$ac_cv_prog_RANLIB_FOR_TARGET
+if test -n "$RANLIB_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $RANLIB_FOR_TARGET" >&5
+echo "${ECHO_T}$RANLIB_FOR_TARGET" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_RANLIB_FOR_TARGET" && break
+ done
+fi
+
+if test -z "$ac_cv_prog_RANLIB_FOR_TARGET" ; then
+ set dummy ranlib
+ if test $build = $target ; then
+ RANLIB_FOR_TARGET="$2"
+ else
+ RANLIB_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ fi
+fi
+
+else
+ RANLIB_FOR_TARGET=$ac_cv_path_RANLIB_FOR_TARGET
+fi
+
+
+
+
+if test -z "$ac_cv_path_STRIP_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ echo "$as_me:$LINENO: checking for strip in $with_build_time_tools" >&5
+echo $ECHO_N "checking for strip in $with_build_time_tools... $ECHO_C" >&6
+ if test -x $with_build_time_tools/strip; then
+ STRIP_FOR_TARGET=`cd $with_build_time_tools && pwd`/strip
+ ac_cv_path_STRIP_FOR_TARGET=$STRIP_FOR_TARGET
+ echo "$as_me:$LINENO: result: $ac_cv_path_STRIP_FOR_TARGET" >&5
+echo "${ECHO_T}$ac_cv_path_STRIP_FOR_TARGET" >&6
+ else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+ fi
+ elif test $build != $host && test $have_gcc_for_target = yes; then
+ STRIP_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=strip`
+ test $STRIP_FOR_TARGET=strip && STRIP_FOR_TARGET=
+ ac_cv_path_STRIP_FOR_TARGET=$STRIP_FOR_TARGET
+ fi
+fi
+if test -z "$ac_cv_path_STRIP_FOR_TARGET" && test -n "$gcc_cv_tool_dirs"; then
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_path_STRIP_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ case $STRIP_FOR_TARGET in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_STRIP_FOR_TARGET="$STRIP_FOR_TARGET" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $gcc_cv_tool_dirs
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_STRIP_FOR_TARGET="$as_dir/$ac_word$ac_exec_ext"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+ ;;
+esac
+fi
+STRIP_FOR_TARGET=$ac_cv_path_STRIP_FOR_TARGET
+
+if test -n "$STRIP_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $STRIP_FOR_TARGET" >&5
+echo "${ECHO_T}$STRIP_FOR_TARGET" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_path_STRIP_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in strip; do
+ echo "$as_me:$LINENO: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo $ECHO_N "checking for ${ncn_progname} in $with_build_time_tools... $ECHO_C" >&6
+ if test -x $with_build_time_tools/${ncn_progname}; then
+ ac_cv_prog_STRIP_FOR_TARGET=$with_build_time_tools/${ncn_progname}
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+ break
+ else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_STRIP_FOR_TARGET"; then
+ for ncn_progname in strip; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_STRIP_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$STRIP_FOR_TARGET"; then
+ ac_cv_prog_STRIP_FOR_TARGET="$STRIP_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_STRIP_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+STRIP_FOR_TARGET=$ac_cv_prog_STRIP_FOR_TARGET
+if test -n "$STRIP_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $STRIP_FOR_TARGET" >&5
+echo "${ECHO_T}$STRIP_FOR_TARGET" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ fi
+ if test -z "$ac_cv_prog_STRIP_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_STRIP_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$STRIP_FOR_TARGET"; then
+ ac_cv_prog_STRIP_FOR_TARGET="$STRIP_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_STRIP_FOR_TARGET="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+STRIP_FOR_TARGET=$ac_cv_prog_STRIP_FOR_TARGET
+if test -n "$STRIP_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $STRIP_FOR_TARGET" >&5
+echo "${ECHO_T}$STRIP_FOR_TARGET" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_STRIP_FOR_TARGET" && break
+ done
+fi
+
+if test -z "$ac_cv_prog_STRIP_FOR_TARGET" ; then
+ set dummy strip
+ if test $build = $target ; then
+ STRIP_FOR_TARGET="$2"
+ else
+ STRIP_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ fi
+fi
+
+else
+ STRIP_FOR_TARGET=$ac_cv_path_STRIP_FOR_TARGET
+fi
+
+
+
+
+if test -z "$ac_cv_path_WINDRES_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ echo "$as_me:$LINENO: checking for windres in $with_build_time_tools" >&5
+echo $ECHO_N "checking for windres in $with_build_time_tools... $ECHO_C" >&6
+ if test -x $with_build_time_tools/windres; then
+ WINDRES_FOR_TARGET=`cd $with_build_time_tools && pwd`/windres
+ ac_cv_path_WINDRES_FOR_TARGET=$WINDRES_FOR_TARGET
+ echo "$as_me:$LINENO: result: $ac_cv_path_WINDRES_FOR_TARGET" >&5
+echo "${ECHO_T}$ac_cv_path_WINDRES_FOR_TARGET" >&6
+ else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+ fi
+ elif test $build != $host && test $have_gcc_for_target = yes; then
+ WINDRES_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=windres`
+ test $WINDRES_FOR_TARGET=windres && WINDRES_FOR_TARGET=
+ ac_cv_path_WINDRES_FOR_TARGET=$WINDRES_FOR_TARGET
+ fi
+fi
+if test -z "$ac_cv_path_WINDRES_FOR_TARGET" && test -n "$gcc_cv_tool_dirs"; then
+ # Extract the first word of "windres", so it can be a program name with args.
+set dummy windres; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_path_WINDRES_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ case $WINDRES_FOR_TARGET in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_WINDRES_FOR_TARGET="$WINDRES_FOR_TARGET" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $gcc_cv_tool_dirs
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_WINDRES_FOR_TARGET="$as_dir/$ac_word$ac_exec_ext"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+ ;;
+esac
+fi
+WINDRES_FOR_TARGET=$ac_cv_path_WINDRES_FOR_TARGET
+
+if test -n "$WINDRES_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $WINDRES_FOR_TARGET" >&5
+echo "${ECHO_T}$WINDRES_FOR_TARGET" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_path_WINDRES_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in windres; do
+ echo "$as_me:$LINENO: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo $ECHO_N "checking for ${ncn_progname} in $with_build_time_tools... $ECHO_C" >&6
+ if test -x $with_build_time_tools/${ncn_progname}; then
+ ac_cv_prog_WINDRES_FOR_TARGET=$with_build_time_tools/${ncn_progname}
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+ break
+ else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_WINDRES_FOR_TARGET"; then
+ for ncn_progname in windres; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_WINDRES_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$WINDRES_FOR_TARGET"; then
+ ac_cv_prog_WINDRES_FOR_TARGET="$WINDRES_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_WINDRES_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+WINDRES_FOR_TARGET=$ac_cv_prog_WINDRES_FOR_TARGET
+if test -n "$WINDRES_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $WINDRES_FOR_TARGET" >&5
+echo "${ECHO_T}$WINDRES_FOR_TARGET" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ fi
+ if test -z "$ac_cv_prog_WINDRES_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_WINDRES_FOR_TARGET+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$WINDRES_FOR_TARGET"; then
+ ac_cv_prog_WINDRES_FOR_TARGET="$WINDRES_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_WINDRES_FOR_TARGET="${ncn_progname}"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+WINDRES_FOR_TARGET=$ac_cv_prog_WINDRES_FOR_TARGET
+if test -n "$WINDRES_FOR_TARGET"; then
+ echo "$as_me:$LINENO: result: $WINDRES_FOR_TARGET" >&5
+echo "${ECHO_T}$WINDRES_FOR_TARGET" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_WINDRES_FOR_TARGET" && break
+ done
+fi
+
+if test -z "$ac_cv_prog_WINDRES_FOR_TARGET" ; then
+ set dummy windres
+ if test $build = $target ; then
+ WINDRES_FOR_TARGET="$2"
+ else
+ WINDRES_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ fi
+fi
+
+else
+ WINDRES_FOR_TARGET=$ac_cv_path_WINDRES_FOR_TARGET
+fi
+
+
+RAW_CXX_FOR_TARGET="$CXX_FOR_TARGET"
+
+echo "$as_me:$LINENO: checking where to find the target ar" >&5
+echo $ECHO_N "checking where to find the target ar... $ECHO_C" >&6
+if test "x${build}" != "x${host}" ; then
+ if expr "x$AR_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$as_me:$LINENO: result: pre-installed in \`dirname $AR_FOR_TARGET\`" >&5
+echo "${ECHO_T}pre-installed in \`dirname $AR_FOR_TARGET\`" >&6
+ else
+ # Canadian cross, just use what we found
+ echo "$as_me:$LINENO: result: pre-installed" >&5
+echo "${ECHO_T}pre-installed" >&6
+ fi
+else
+ ok=yes
+ case " ${configdirs} " in
+ *" binutils "*) ;;
+ *) ok=no ;;
+ esac
+
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ AR_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/ar'
+ echo "$as_me:$LINENO: result: just compiled" >&5
+echo "${ECHO_T}just compiled" >&6
+ elif expr "x$AR_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$as_me:$LINENO: result: pre-installed in \`dirname $AR_FOR_TARGET\`" >&5
+echo "${ECHO_T}pre-installed in \`dirname $AR_FOR_TARGET\`" >&6
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ AR_FOR_TARGET='$(AR)'
+ echo "$as_me:$LINENO: result: host tool" >&5
+echo "${ECHO_T}host tool" >&6
+ else
+ # We need a cross tool
+ echo "$as_me:$LINENO: result: pre-installed" >&5
+echo "${ECHO_T}pre-installed" >&6
+ fi
+fi
+
+echo "$as_me:$LINENO: checking where to find the target as" >&5
+echo $ECHO_N "checking where to find the target as... $ECHO_C" >&6
+if test "x${build}" != "x${host}" ; then
+ if expr "x$AS_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$as_me:$LINENO: result: pre-installed in \`dirname $AS_FOR_TARGET\`" >&5
+echo "${ECHO_T}pre-installed in \`dirname $AS_FOR_TARGET\`" >&6
+ else
+ # Canadian cross, just use what we found
+ echo "$as_me:$LINENO: result: pre-installed" >&5
+echo "${ECHO_T}pre-installed" >&6
+ fi
+else
+ ok=yes
+ case " ${configdirs} " in
+ *" gas "*) ;;
+ *) ok=no ;;
+ esac
+
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ AS_FOR_TARGET='$$r/$(HOST_SUBDIR)/gas/as-new'
+ echo "$as_me:$LINENO: result: just compiled" >&5
+echo "${ECHO_T}just compiled" >&6
+ elif expr "x$AS_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$as_me:$LINENO: result: pre-installed in \`dirname $AS_FOR_TARGET\`" >&5
+echo "${ECHO_T}pre-installed in \`dirname $AS_FOR_TARGET\`" >&6
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ AS_FOR_TARGET='$(AS)'
+ echo "$as_me:$LINENO: result: host tool" >&5
+echo "${ECHO_T}host tool" >&6
+ else
+ # We need a cross tool
+ echo "$as_me:$LINENO: result: pre-installed" >&5
+echo "${ECHO_T}pre-installed" >&6
+ fi
+fi
+
+echo "$as_me:$LINENO: checking where to find the target cc" >&5
+echo $ECHO_N "checking where to find the target cc... $ECHO_C" >&6
+if test "x${build}" != "x${host}" ; then
+ if expr "x$CC_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$as_me:$LINENO: result: pre-installed in \`dirname $CC_FOR_TARGET\`" >&5
+echo "${ECHO_T}pre-installed in \`dirname $CC_FOR_TARGET\`" >&6
+ else
+ # Canadian cross, just use what we found
+ echo "$as_me:$LINENO: result: pre-installed" >&5
+echo "${ECHO_T}pre-installed" >&6
+ fi
+else
+ ok=yes
+ case " ${configdirs} " in
+ *" gcc "*) ;;
+ *) ok=no ;;
+ esac
+
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ CC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/'
+ echo "$as_me:$LINENO: result: just compiled" >&5
+echo "${ECHO_T}just compiled" >&6
+ elif expr "x$CC_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$as_me:$LINENO: result: pre-installed in \`dirname $CC_FOR_TARGET\`" >&5
+echo "${ECHO_T}pre-installed in \`dirname $CC_FOR_TARGET\`" >&6
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ CC_FOR_TARGET='$(CC)'
+ echo "$as_me:$LINENO: result: host tool" >&5
+echo "${ECHO_T}host tool" >&6
+ else
+ # We need a cross tool
+ echo "$as_me:$LINENO: result: pre-installed" >&5
+echo "${ECHO_T}pre-installed" >&6
+ fi
+fi
+
+echo "$as_me:$LINENO: checking where to find the target c++" >&5
+echo $ECHO_N "checking where to find the target c++... $ECHO_C" >&6
+if test "x${build}" != "x${host}" ; then
+ if expr "x$CXX_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$as_me:$LINENO: result: pre-installed in \`dirname $CXX_FOR_TARGET\`" >&5
+echo "${ECHO_T}pre-installed in \`dirname $CXX_FOR_TARGET\`" >&6
+ else
+ # Canadian cross, just use what we found
+ echo "$as_me:$LINENO: result: pre-installed" >&5
+echo "${ECHO_T}pre-installed" >&6
+ fi
+else
+ ok=yes
+ case " ${configdirs} " in
+ *" gcc "*) ;;
+ *) ok=no ;;
+ esac
+ case ,${enable_languages}, in
+ *,c++,*) ;;
+ *) ok=no ;;
+ esac
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/g++ -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ `test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
+ echo "$as_me:$LINENO: result: just compiled" >&5
+echo "${ECHO_T}just compiled" >&6
+ elif expr "x$CXX_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$as_me:$LINENO: result: pre-installed in \`dirname $CXX_FOR_TARGET\`" >&5
+echo "${ECHO_T}pre-installed in \`dirname $CXX_FOR_TARGET\`" >&6
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ CXX_FOR_TARGET='$(CXX)'
+ echo "$as_me:$LINENO: result: host tool" >&5
+echo "${ECHO_T}host tool" >&6
+ else
+ # We need a cross tool
+ echo "$as_me:$LINENO: result: pre-installed" >&5
+echo "${ECHO_T}pre-installed" >&6
+ fi
+fi
+
+echo "$as_me:$LINENO: checking where to find the target c++ for libstdc++" >&5
+echo $ECHO_N "checking where to find the target c++ for libstdc++... $ECHO_C" >&6
+if test "x${build}" != "x${host}" ; then
+ if expr "x$RAW_CXX_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$as_me:$LINENO: result: pre-installed in \`dirname $RAW_CXX_FOR_TARGET\`" >&5
+echo "${ECHO_T}pre-installed in \`dirname $RAW_CXX_FOR_TARGET\`" >&6
+ else
+ # Canadian cross, just use what we found
+ echo "$as_me:$LINENO: result: pre-installed" >&5
+echo "${ECHO_T}pre-installed" >&6
+ fi
+else
+ ok=yes
+ case " ${configdirs} " in
+ *" gcc "*) ;;
+ *) ok=no ;;
+ esac
+ case ,${enable_languages}, in
+ *,c++,*) ;;
+ *) ok=no ;;
+ esac
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ RAW_CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -shared-libgcc -B$$r/$(HOST_SUBDIR)/gcc -nostdinc++ -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
+ echo "$as_me:$LINENO: result: just compiled" >&5
+echo "${ECHO_T}just compiled" >&6
+ elif expr "x$RAW_CXX_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$as_me:$LINENO: result: pre-installed in \`dirname $RAW_CXX_FOR_TARGET\`" >&5
+echo "${ECHO_T}pre-installed in \`dirname $RAW_CXX_FOR_TARGET\`" >&6
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ RAW_CXX_FOR_TARGET='$(CXX)'
+ echo "$as_me:$LINENO: result: host tool" >&5
+echo "${ECHO_T}host tool" >&6
+ else
+ # We need a cross tool
+ echo "$as_me:$LINENO: result: pre-installed" >&5
+echo "${ECHO_T}pre-installed" >&6
+ fi
+fi
+
+echo "$as_me:$LINENO: checking where to find the target dlltool" >&5
+echo $ECHO_N "checking where to find the target dlltool... $ECHO_C" >&6
+if test "x${build}" != "x${host}" ; then
+ if expr "x$DLLTOOL_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$as_me:$LINENO: result: pre-installed in \`dirname $DLLTOOL_FOR_TARGET\`" >&5
+echo "${ECHO_T}pre-installed in \`dirname $DLLTOOL_FOR_TARGET\`" >&6
+ else
+ # Canadian cross, just use what we found
+ echo "$as_me:$LINENO: result: pre-installed" >&5
+echo "${ECHO_T}pre-installed" >&6
+ fi
+else
+ ok=yes
+ case " ${configdirs} " in
+ *" binutils "*) ;;
+ *) ok=no ;;
+ esac
+
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ DLLTOOL_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/dlltool'
+ echo "$as_me:$LINENO: result: just compiled" >&5
+echo "${ECHO_T}just compiled" >&6
+ elif expr "x$DLLTOOL_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$as_me:$LINENO: result: pre-installed in \`dirname $DLLTOOL_FOR_TARGET\`" >&5
+echo "${ECHO_T}pre-installed in \`dirname $DLLTOOL_FOR_TARGET\`" >&6
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ DLLTOOL_FOR_TARGET='$(DLLTOOL)'
+ echo "$as_me:$LINENO: result: host tool" >&5
+echo "${ECHO_T}host tool" >&6
+ else
+ # We need a cross tool
+ echo "$as_me:$LINENO: result: pre-installed" >&5
+echo "${ECHO_T}pre-installed" >&6
+ fi
+fi
+
+echo "$as_me:$LINENO: checking where to find the target gcc" >&5
+echo $ECHO_N "checking where to find the target gcc... $ECHO_C" >&6
+if test "x${build}" != "x${host}" ; then
+ if expr "x$GCC_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$as_me:$LINENO: result: pre-installed in \`dirname $GCC_FOR_TARGET\`" >&5
+echo "${ECHO_T}pre-installed in \`dirname $GCC_FOR_TARGET\`" >&6
+ else
+ # Canadian cross, just use what we found
+ echo "$as_me:$LINENO: result: pre-installed" >&5
+echo "${ECHO_T}pre-installed" >&6
+ fi
+else
+ ok=yes
+ case " ${configdirs} " in
+ *" gcc "*) ;;
+ *) ok=no ;;
+ esac
+
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ GCC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/'
+ echo "$as_me:$LINENO: result: just compiled" >&5
+echo "${ECHO_T}just compiled" >&6
+ elif expr "x$GCC_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$as_me:$LINENO: result: pre-installed in \`dirname $GCC_FOR_TARGET\`" >&5
+echo "${ECHO_T}pre-installed in \`dirname $GCC_FOR_TARGET\`" >&6
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ GCC_FOR_TARGET='$()'
+ echo "$as_me:$LINENO: result: host tool" >&5
+echo "${ECHO_T}host tool" >&6
+ else
+ # We need a cross tool
+ echo "$as_me:$LINENO: result: pre-installed" >&5
+echo "${ECHO_T}pre-installed" >&6
+ fi
+fi
+
+echo "$as_me:$LINENO: checking where to find the target gcj" >&5
+echo $ECHO_N "checking where to find the target gcj... $ECHO_C" >&6
+if test "x${build}" != "x${host}" ; then
+ if expr "x$GCJ_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$as_me:$LINENO: result: pre-installed in \`dirname $GCJ_FOR_TARGET\`" >&5
+echo "${ECHO_T}pre-installed in \`dirname $GCJ_FOR_TARGET\`" >&6
+ else
+ # Canadian cross, just use what we found
+ echo "$as_me:$LINENO: result: pre-installed" >&5
+echo "${ECHO_T}pre-installed" >&6
+ fi
+else
+ ok=yes
+ case " ${configdirs} " in
+ *" gcc "*) ;;
+ *) ok=no ;;
+ esac
+ case ,${enable_languages}, in
+ *,java,*) ;;
+ *) ok=no ;;
+ esac
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ GCJ_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/gcj -B$$r/$(HOST_SUBDIR)/gcc/'
+ echo "$as_me:$LINENO: result: just compiled" >&5
+echo "${ECHO_T}just compiled" >&6
+ elif expr "x$GCJ_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$as_me:$LINENO: result: pre-installed in \`dirname $GCJ_FOR_TARGET\`" >&5
+echo "${ECHO_T}pre-installed in \`dirname $GCJ_FOR_TARGET\`" >&6
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ GCJ_FOR_TARGET='$(GCJ)'
+ echo "$as_me:$LINENO: result: host tool" >&5
+echo "${ECHO_T}host tool" >&6
+ else
+ # We need a cross tool
+ echo "$as_me:$LINENO: result: pre-installed" >&5
+echo "${ECHO_T}pre-installed" >&6
+ fi
+fi
+
+echo "$as_me:$LINENO: checking where to find the target gfortran" >&5
+echo $ECHO_N "checking where to find the target gfortran... $ECHO_C" >&6
+if test "x${build}" != "x${host}" ; then
+ if expr "x$GFORTRAN_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$as_me:$LINENO: result: pre-installed in \`dirname $GFORTRAN_FOR_TARGET\`" >&5
+echo "${ECHO_T}pre-installed in \`dirname $GFORTRAN_FOR_TARGET\`" >&6
+ else
+ # Canadian cross, just use what we found
+ echo "$as_me:$LINENO: result: pre-installed" >&5
+echo "${ECHO_T}pre-installed" >&6
+ fi
+else
+ ok=yes
+ case " ${configdirs} " in
+ *" gcc "*) ;;
+ *) ok=no ;;
+ esac
+ case ,${enable_languages}, in
+ *,fortran,*) ;;
+ *) ok=no ;;
+ esac
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ GFORTRAN_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/gfortran -B$$r/$(HOST_SUBDIR)/gcc/'
+ echo "$as_me:$LINENO: result: just compiled" >&5
+echo "${ECHO_T}just compiled" >&6
+ elif expr "x$GFORTRAN_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$as_me:$LINENO: result: pre-installed in \`dirname $GFORTRAN_FOR_TARGET\`" >&5
+echo "${ECHO_T}pre-installed in \`dirname $GFORTRAN_FOR_TARGET\`" >&6
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ GFORTRAN_FOR_TARGET='$(GFORTRAN)'
+ echo "$as_me:$LINENO: result: host tool" >&5
+echo "${ECHO_T}host tool" >&6
+ else
+ # We need a cross tool
+ echo "$as_me:$LINENO: result: pre-installed" >&5
+echo "${ECHO_T}pre-installed" >&6
+ fi
+fi
+
+echo "$as_me:$LINENO: checking where to find the target ld" >&5
+echo $ECHO_N "checking where to find the target ld... $ECHO_C" >&6
+if test "x${build}" != "x${host}" ; then
+ if expr "x$LD_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$as_me:$LINENO: result: pre-installed in \`dirname $LD_FOR_TARGET\`" >&5
+echo "${ECHO_T}pre-installed in \`dirname $LD_FOR_TARGET\`" >&6
+ else
+ # Canadian cross, just use what we found
+ echo "$as_me:$LINENO: result: pre-installed" >&5
+echo "${ECHO_T}pre-installed" >&6
+ fi
+else
+ ok=yes
+ case " ${configdirs} " in
+ *" ld "*) ;;
+ *) ok=no ;;
+ esac
+
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ LD_FOR_TARGET='$$r/$(HOST_SUBDIR)/ld/ld-new'
+ echo "$as_me:$LINENO: result: just compiled" >&5
+echo "${ECHO_T}just compiled" >&6
+ elif expr "x$LD_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$as_me:$LINENO: result: pre-installed in \`dirname $LD_FOR_TARGET\`" >&5
+echo "${ECHO_T}pre-installed in \`dirname $LD_FOR_TARGET\`" >&6
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ LD_FOR_TARGET='$(LD)'
+ echo "$as_me:$LINENO: result: host tool" >&5
+echo "${ECHO_T}host tool" >&6
+ else
+ # We need a cross tool
+ echo "$as_me:$LINENO: result: pre-installed" >&5
+echo "${ECHO_T}pre-installed" >&6
+ fi
+fi
+
+echo "$as_me:$LINENO: checking where to find the target lipo" >&5
+echo $ECHO_N "checking where to find the target lipo... $ECHO_C" >&6
+if test "x${build}" != "x${host}" ; then
+ if expr "x$LIPO_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$as_me:$LINENO: result: pre-installed in \`dirname $LIPO_FOR_TARGET\`" >&5
+echo "${ECHO_T}pre-installed in \`dirname $LIPO_FOR_TARGET\`" >&6
+ else
+ # Canadian cross, just use what we found
+ echo "$as_me:$LINENO: result: pre-installed" >&5
+echo "${ECHO_T}pre-installed" >&6
+ fi
+else
+ if expr "x$LIPO_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$as_me:$LINENO: result: pre-installed in \`dirname $LIPO_FOR_TARGET\`" >&5
+echo "${ECHO_T}pre-installed in \`dirname $LIPO_FOR_TARGET\`" >&6
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ LIPO_FOR_TARGET='$(LIPO)'
+ echo "$as_me:$LINENO: result: host tool" >&5
+echo "${ECHO_T}host tool" >&6
+ else
+ # We need a cross tool
+ echo "$as_me:$LINENO: result: pre-installed" >&5
+echo "${ECHO_T}pre-installed" >&6
+ fi
+fi
+
+echo "$as_me:$LINENO: checking where to find the target nm" >&5
+echo $ECHO_N "checking where to find the target nm... $ECHO_C" >&6
+if test "x${build}" != "x${host}" ; then
+ if expr "x$NM_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$as_me:$LINENO: result: pre-installed in \`dirname $NM_FOR_TARGET\`" >&5
+echo "${ECHO_T}pre-installed in \`dirname $NM_FOR_TARGET\`" >&6
+ else
+ # Canadian cross, just use what we found
+ echo "$as_me:$LINENO: result: pre-installed" >&5
+echo "${ECHO_T}pre-installed" >&6
+ fi
+else
+ ok=yes
+ case " ${configdirs} " in
+ *" binutils "*) ;;
+ *) ok=no ;;
+ esac
+
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ NM_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/nm-new'
+ echo "$as_me:$LINENO: result: just compiled" >&5
+echo "${ECHO_T}just compiled" >&6
+ elif expr "x$NM_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$as_me:$LINENO: result: pre-installed in \`dirname $NM_FOR_TARGET\`" >&5
+echo "${ECHO_T}pre-installed in \`dirname $NM_FOR_TARGET\`" >&6
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ NM_FOR_TARGET='$(NM)'
+ echo "$as_me:$LINENO: result: host tool" >&5
+echo "${ECHO_T}host tool" >&6
+ else
+ # We need a cross tool
+ echo "$as_me:$LINENO: result: pre-installed" >&5
+echo "${ECHO_T}pre-installed" >&6
+ fi