+esac
+
+# If we aren't building newlib, then don't build libgloss, since libgloss
+# depends upon some newlib header files.
+case "${noconfigdirs}" in
+ *target-libgloss*) ;;
+ *target-newlib*) noconfigdirs="$noconfigdirs target-libgloss" ;;
+esac
+
+# Figure out what language subdirectories are present.
+# Look if the user specified --enable-languages="..."; if not, use
+# the environment variable $LANGUAGES if defined. $LANGUAGES might
+# go away some day.
+# NB: embedded tabs in this IF block -- do not untabify
+if test x"${enable_languages+set}" != xset; then
+ if test x"${LANGUAGES+set}" = xset; then
+ enable_languages="${LANGUAGES}"
+ echo configure.in: warning: setting LANGUAGES is deprecated, use --enable-languages instead 1>&2
+ else
+ enable_languages=all
+ fi
+else
+ if test x"${enable_languages}" = x ||
+ test x"${enable_languages}" = xyes;
+ then
+ echo configure.in: --enable-languages needs at least one language argument 1>&2
+ exit 1
+ fi
+fi
+enable_languages=`echo "${enable_languages}" | sed -e 's/[ ,][ ,]*/,/g' -e 's/,$//'`
+
+# First scan to see if an enabled language requires some other language.
+# We assume that a given config-lang.in will list all the language
+# front ends it requires, even if some are required indirectly.
+for lang in ${srcdir}/gcc/*/config-lang.in ..
+do
+ case $lang in
+ ..)
+ ;;
+ # The odd quoting in the next line works around
+ # an apparent bug in bash 1.12 on linux.
+ ${srcdir}/gcc/[*]/config-lang.in)
+ ;;
+ *)
+ lang_alias=`sed -n -e 's,^language=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^language=\([^ ]*\).*$,\1,p' $lang`
+ this_lang_requires=`sed -n -e 's,^lang_requires=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^lang_requires=\([^ ]*\).*$,\1,p' $lang`
+ for other in $this_lang_requires
+ do
+ case ,${enable_languages}, in
+ *,$other,*)
+ ;;
+ *,all,*)
+ ;;
+ *,$lang_alias,*)
+ echo " \`$other' language required by \`$lang_alias'; enabling" 1>&2
+ enable_languages="$enable_languages,$other"
+ ;;
+ esac
+ done
+ ;;
+ esac
+done
+
+subdirs=
+for lang in ${srcdir}/gcc/*/config-lang.in ..
+do
+ case $lang in
+ ..) ;;
+ # The odd quoting in the next line works around
+ # an apparent bug in bash 1.12 on linux.
+ ${srcdir}/gcc/[*]/config-lang.in) ;;
+ *)
+ lang_alias=`sed -n -e 's,^language=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^language=\([^ ]*\).*$,\1,p' $lang`
+ this_lang_libs=`sed -n -e 's,^target_libs=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^target_libs=\([^ ]*\).*$,\1,p' $lang`
+ this_lang_dirs=`sed -n -e 's,^lang_dirs=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^lang_dirs=\([^ ]*\).*$,\1,p' $lang`
+ build_by_default=`sed -n -e 's,^build_by_default=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^build_by_default=\([^ ]*\).*$,\1,p' $lang`
+ if test "x$lang_alias" = x
+ then
+ echo "$lang doesn't set \$language." 1>&2
+ exit 1
+ fi
+ case ${build_by_default},${enable_languages}, in
+ *,$lang_alias,*) add_this_lang=yes ;;
+ no,*) add_this_lang=no ;;
+ *,all,*) add_this_lang=yes ;;
+ *) add_this_lang=no ;;
+ esac
+ if test x"${add_this_lang}" = xyes; then
+ eval target_libs='"$target_libs "'\"$this_lang_libs\"
+ else
+ eval noconfigdirs='"$noconfigdirs "'\"$this_lang_libs $this_lang_dirs\"
+ fi
+ ;;
+ esac
+done
+
+# Remove the entries in $skipdirs and $noconfigdirs from $configdirs and
+# $target_configdirs.
+# If we have the source for $noconfigdirs entries, add them to $notsupp.
+
+notsupp=""
+for dir in . $skipdirs $noconfigdirs ; do
+ dirname=`echo $dir | sed -e s/target-//g`
+ if test $dir != . && echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ configdirs=`echo " ${configdirs} " | sed -e "s/ ${dir} / /"`
+ if test -r $srcdir/$dirname/configure \
+ || test -r $srcdir/$dirname/configure.in ; then
+ if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ true
+ else
+ notsupp="$notsupp $dir"
+ fi
+ fi
+ fi
+ if test $dir != . && echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ target_configdirs=`echo " ${target_configdirs} " | sed -e "s/ ${dir} / /"`
+ if test -r $srcdir/$dirname/configure \
+ || test -r $srcdir/$dirname/configure.in ; then
+ if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ true
+ else
+ notsupp="$notsupp $dir"
+ fi
+ fi
+ fi
+done
+
+# Sometimes the tools are distributed with libiberty but with no other
+# libraries. In that case, we don't want to build target-libiberty.
+if test -n "${target_configdirs}" ; then
+ others=
+ for i in `echo ${target_configdirs} | sed -e s/target-//g` ; do
+ if test "$i" != "libiberty" ; then
+ if test -r $srcdir/$i/configure || test -r $srcdir/$i/configure.in ; then
+ others=yes;
+ break;
+ fi
+ fi
+ done
+ if test -z "${others}" ; then
+ target_configdirs=
+ fi
+fi
+
+# Deconfigure all subdirectories, in case we are changing the
+# configuration from one where a subdirectory is supported to one where it
+# is not.
+if test -z "${norecursion}" && test -n "${configdirs}" ; then
+ for i in `echo ${configdirs} | sed -e s/target-//g` ; do
+ rm -f $i/Makefile
+ done
+fi
+if test -z "${norecursion}" && test -n "${target_configdirs}" ; then
+ for i in `echo ${target_configdirs} | sed -e s/target-//g` ; do
+ rm -f ${target_subdir}/$i/Makefile
+ done
+fi
+
+# Quietly strip out all directories which aren't configurable in this tree.
+# This relies on all configurable subdirectories being autoconfiscated, which
+# is now the case.
+configdirs_all="$configdirs"
+configdirs=
+for i in ${configdirs_all} ; do
+ if test -f ${srcdir}/$i/configure ; then
+ configdirs="${configdirs} $i"
+ fi
+done
+target_configdirs_all="$target_configdirs"
+target_configdirs=
+for i in ${target_configdirs_all} ; do
+ j=`echo $i | sed -e s/target-//g`
+ if test -f ${srcdir}/$j/configure ; then
+ target_configdirs="${target_configdirs} $i"
+ fi
+done
+
+# Produce a warning message for the subdirs we can't configure.
+# This isn't especially interesting in the Cygnus tree, but in the individual
+# FSF releases, it's important to let people know when their machine isn't
+# supported by the one or two programs in a package.
+
+if test -n "${notsupp}" && test -z "${norecursion}" ; then
+ # If $appdirs is non-empty, at least one of those directories must still
+ # be configured, or we error out. (E.g., if the gas release supports a
+ # specified target in some subdirs but not the gas subdir, we shouldn't
+ # pretend that all is well.)
+ if test -n "$appdirs" ; then
+ for dir in $appdirs ; do
+ if test -r $dir/Makefile.in ; then
+ if echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ appdirs=""
+ break
+ fi
+ if echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ appdirs=""
+ break
+ fi
+ fi
+ done
+ if test -n "$appdirs" ; then
+ echo "*** This configuration is not supported by this package." 1>&2
+ exit 1
+ fi
+ fi
+ # Okay, some application will build, or we don't care to check. Still
+ # notify of subdirs not getting built.
+ echo "*** This configuration is not supported in the following subdirectories:" 1>&2
+ echo " ${notsupp}" 1>&2
+ echo " (Any other directories should still work fine.)" 1>&2
+fi
+
+case "$host" in
+ *msdosdjgpp*)
+ enable_gdbtk=no ;;
+esac
+# Determine whether gdb needs tk/tcl or not.
+case "$enable_gdbtk" in
+ no)
+ GDB_TK="" ;;
+ *)
+ GDB_TK="all-tcl all-tk all-itcl all-tix all-libgui" ;;
+esac
+
+copy_dirs=
+
+# Handle --with-headers=XXX. The contents of the named directory are
+# copied to $(tooldir)/sys-include.
+if test x"${with_headers}" != x ; then
+ if test x${is_cross_compiler} = xno ; then
+ echo 1>&2 '***' --with-headers is only supported when cross compiling
+ exit 1
+ fi
+ case "${exec_prefixoption}" in
+ "") x=${prefix} ;;
+ *) x=${exec_prefix} ;;
+ esac
+ copy_dirs="${copy_dirs} ${with_headers} $x/${target_alias}/sys-include"
+fi
+
+# Handle --with-libs=XXX. Multiple directories are permitted. The
+# contents are copied to $(tooldir)/lib.
+if test x"${with_libs}" != x ; then
+ if test x${is_cross_compiler} = xno ; then
+ echo 1>&2 '***' --with-libs is only supported when cross compiling
+ exit 1
+ fi
+ # Copy the libraries in reverse order, so that files in the first named
+ # library override files in subsequent libraries.
+ case "${exec_prefixoption}" in
+ "") x=${prefix} ;;
+ *) x=${exec_prefix} ;;
+ esac
+ for l in ${with_libs}; do
+ copy_dirs="$l $x/${target_alias}/lib ${copy_dirs}"
+ done
+fi
+
+# Handle ${copy_dirs}
+set fnord ${copy_dirs}
+shift
+while test $# != 0 ; do
+ if test -f $2/COPIED && test x"`cat $2/COPIED`" = x"$1" ; then
+ :
+ else
+ echo Copying $1 to $2
+
+ # Use the install script to create the directory and all required
+ # parent directories.
+ if test -d $2 ; then
+ :
+ else
+ echo >config.temp
+ ${srcdir}/install-sh -c -m 644 config.temp $2/COPIED