+2012-04-12 Jie Zhang <jie@codesourcery.com>
+ Meador Inge <meadori@codesourcery.com>
+
+ * config/tc-arm.c (only_one_reg_in_list): New function.
+ (encode_ldmstm): Ditto.
+ (do_ldmstm): Use a different encoding when pushing or poping
+ a single register.
+ (A_COND_MASK): New macro.
+ (A_PUSH_POP_OP_MASK): Ditto.
+ (A1_OPCODE_PUSH): Ditto.
+ (A2_OPCODE_PUSH): Ditto.
+ (A2_OPCODE_POP): Ditto.
+
+2012-04-06 Maciej W. Rozycki <macro@linux-mips.org>
+
+ * doc/c-mips.texi (MIPS Opts): Correct -no-mfix-24k to
+ -mno-fix-24k.
+
+2012-04-06 Roland McGrath <mcgrathr@google.com>
+
+ * configure.in (AC_CHECK_HEADERS): Add locale.h.
+ * config.in: Regenerate.
+ * configure: Regenerate.
+
+2012-04-05 Nick Clifton <nickc@redhat.com>
+
+ * configure.in (AC_CHECK_FUNCS): Add setlocale.
+ (AM_LC_MESSAGES): Add.
+ * aclocal.m4: Regenerate.
+ * config.in: Regenerate.
+ * configure: Regenerate.
+
+2012-04-03 DJ Delorie <dj@redhat.com>
+
+ * config/rx-parse.y: Make the .L optional for ADC and SBB.
+
+2012-04-02 DJ Delorie <dj@redhat.com>
+
+ * config/rx-parse.y: IMM->IMM_, take an extra parameter for the
+ transfer size.
+ (IMM): New, call IMM_ with the default 32.
+ (IMMW,IMMB): Likewise, for 16 and 8.
+ (NIMM, MBIMM): Add size parameter.
+ (immediate): Likewise. Allow 32768..65535 for 16-bit transfers.
+ (MOV.W): Use IMMW instead of IMM.
+
+ * config/rx-parse.y (ADC,SBB): ADC and SBB only allow .L.
+ (op_dp20_rm_l): New.
+ (op_dp20_rim_l): New.
+
+ * config/rx-parse.y (op_dp20_rms): Rename to op_dp20_rr, don't allow mem.
+ (ABS, NEG, NOT): These only take REG or REG,REG (rr, not rms).
+
+2012-03-29 Terry Guo <terry.guo@arm.com>
+
+ * config/tc-arm.c (arm_cpus): Add cortex-m0plus.
+ * doc/c-arm.texi (ARM Options): Document -mcpu=cortex-m0plus.
+
+2012-03-23 Maxim Kuvyrkov <maxim@codesourcery.com>
+
+ * config/tc-mips.c (mips_cpu_info_table): Add entry for Broadcom XLP.
+ * doc/c-mips.texi: Mention XLP.
+
+2012-03-21 Thomas Schwinge <thomas@codesourcery.com>
+
+ [SH] Support the .uaquad and .8byte directives also for non-sh64
+ configurations.
+
+ * config/tc-sh.c (sh_cons_fix_new, md_apply_fix) [!HAVE_SH64]: Handle
+ BFD_RELOC_64.
+ * doc/c-sh64.texi (SH64 Machine Directives): Move .uaquad
+ description...
+ * doc/c-sh.texi (SH Machine Directives): ... here.
+
+2012-03-20 Nick Clifton <nickc@redhat.com>
+
+ * config/tc-arm.c (do_vmrs): Accept priviledged mode VFP system
+ registers.
+ (do_vmsr): Likewise.
+ (arm_opcode_insns): Do not default to using the FPSCR register in
+ the VMRS and VMSR registers.
+
+2012-03-16 Roland McGrath <mcgrathr@google.com>
+
+ * config/tc-i386.h [TE_NACL] (ELF_TARGET_FORMAT32, ELF_TARGET_FORMAT64):
+ Define for this case.
+ * configure.tgt (i386-*-nacl*): If ${cpu} is x86_64*, default to x32.
+
+2012-03-16 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
+
+ * config/tc-arm.c (aeabi_set_public_attributes): Correct
+ handling of Tag_DIV_use.
+
+2012-03-15 Thomas Schwinge <thomas@codesourcery.com>
+
+ * doc/as.texinfo (Bundle directives): Fix typo.
+
+2012-03-14 Ryan Mansfield <rmansfield@qnx.com>
+
+ * doc/as.texinfo (Bundle directives): Replace @defn with @dfn.
+
+2012-03-13 Roland McGrath <mcgrathr@google.com>
+
+ * config/tc-arm.c (arm_frag_max_var): New function.
+ * config/tc-arm.h: Declare it.
+ (md_frag_max_var): New macro.
+
+ * config/tc-i386.c (i386_frag_max_var): New function.
+ * config/tc-i386.h: Declare it.
+ (md_frag_max_var): New macro.
+
+ * doc/as.texinfo (Bundle directives): New node.
+ (Pseudo Ops): Add it to the menu.
+ * NEWS: Mention new feature.
+ * read.c [md_frag_max_var] (HANDLE_BUNDLE): New macro.
+ [HANDLE_BUNDLE] (bundle_align_p2): New variable.
+ [HANDLE_BUNDLE] (bundle_lock_frchain, bundle_lock_frag): New variables.
+ [HANDLE_BUNDLE] (start_bundle, pending_bundle_size, finish_bundle):
+ New functions.
+ (assemble_one): New function if [HANDLE_BUNDLE], #define directly
+ to md_assembly if not.
+ (read_a_source_file): Call assemble_one in place of md_assemble.
+ (read_a_source_file) [HANDLE_BUNDLE]: Check for unterminated
+ .bundle_lock at end of processing.
+ [HANDLE_BUNDLE] (s_bundle_align_mode, s_bundle_lock, s_bundle_unlock):
+ New functions.
+ [HANDLE_BUNDLE] (potable): Add their entries.
+ * read.h: Declare new functions.
+
+2012-03-10 Edmar Wienskoski <edmar@freescale.com>
+
+ * config/tc-ppc.c (md_show_usage): Document -me5500 and -me6500.
+ (ppc_handle_align): Add termination nop opcode for e500mc family.
+ * doc/as.texinfo: Document options -me5500 and -me6500.
+ * doc/c-ppc.texi: Likewise.
+
+2012-03-07 Nick Clifton <nickc@redhat.com>
+
+ * config/tc-mn10300.c (other_registers): Add SSP and USP.
+ (md_assemble): Add support for TLS relocs.
+ (mn10300_parse_name): Likewise.
+
+2012-02-27 Alan Modra <amodra@gmail.com>
+
+ * config/tc-crx.c (check_range): Correct uint32_t misconceptions.
+
+2012-02-27 Alan Modra <amodra@gmail.com>
+
+ * config/tc-tic4x.c (tic4x_do_align): Remove ATTRIBUTE_UNUSED on
+ params. Properly generate NOP pattern. Comment reason for
+ subseg_text_p failure.
+
+2012-02-27 Alan Modra <amodra@gmail.com>
+
+ * config/tc-h8300.c (constant_fits_width_p): Trim constant to 32 bits
+ and sign extend before range tests.
+ (constant_fits_size_p): Similarly.
+ (get_specific): Trim X_add_number to 32 bits.
+ (fix_operand_size): Likewise, and use unsigned test for signed
+ ranges.
+
+2012-02-27 Alan Modra <amodra@gmail.com>
+
+ * config/tc-crx.c: Include bfd_stdint.h.
+ (getconstant): Remove irrelevant comment. Don't fail due to
+ sign-extension of int mask.
+ (check_range): Rewrite using unsigned arithmetic throughout.
+
+2012-02-25 Walter Lee <walt@tilera.com>
+
+ * tc-tilepro.c (emit_tilepro_instruction): Check if symbol is
+ non-local before checking sy_value.
+ * tc-tilegx.c (emit_tilegx_instruction): Ditto.
+
+2012-02-25 Walter Lee <walt@tilera.com>
+
+ * tc-tilepro.c (O_tls_le): Define operator.
+ (O_tls_le_lo16): Ditto.
+ (O_tls_le_hi16): Ditto.
+ (O_tls_le_ha16): Ditto.
+ (O_tls_gd_call): Ditto.
+ (O_tls_gd_add): Ditto.
+ (O_tls_ie_load): Ditto.
+ (md_begin): Delete old operators; handle new operators.
+ (emit_tilepro_instruction): Ditto.
+ (md_apply_fix): Ditto.
+ * tc-tilegx.c (O_hw1_got): Delete operator.
+ (O_hw2_got): Ditto.
+ (O_hw3_got): Ditto.
+ (O_hw2_last_got): Ditto.
+ (O_hw1_tls_gd): Ditto.
+ (O_hw2_tls_gd): Ditto.
+ (O_hw3_tls_gd): Ditto.
+ (O_hw2_last_tls_gd): Ditto.
+ (O_hw1_tls_ie): Ditto.
+ (O_hw2_tls_ie): Ditto.
+ (O_hw3_tls_ie): Ditto.
+ (O_hw2_last_tls_ie): Ditto.
+ (O_hw0_tls_le): Define operator.
+ (O_hw0_last_tls_le): Ditto.
+ (O_hw1_last_tls_le): Ditto.
+ (O_tls_gd_call): Ditto.
+ (O_tls_gd_add): Ditto.
+ (O_tls_ie_load): Ditto.
+ (O_tls_add): Ditto.
+ (md_begin): Delete old operators; handle new operators.
+ (emit_tilegx_instruction): Ditto.
+ (md_apply_fix): Ditto.
+ * doc/c-tilegx.texi: Delete old operators; document new operators.
+ * doc/c-tilepro.texi: Ditto.
+
+2012-02-25 Walter Lee <walt@tilera.com>
+
+ * tc-tilepro.c (apply_special_operator): delete cases for
+ got and tls operators.
+ (md_apply_fix): Ditto.
+ * tc-tilegx.c (md_begin): Set architecture and machine.
+ (tilegx_target_format): Handle big endian.
+ (OPTION_EB): Define.
+ (OPTION_EL): Define.
+ (md_longopts): Add entries for "EB" and "EL".
+ (md_parse_option): Handle OPTION_EB and OPTION_EL.
+ (md_show_usage): Add -EB and -EL.
+ (md_number_to_chars): New.
+ (apply_special_operator): delete cases for got and tls
+ operators.
+ (md_apply_fix): Ditto.
+ * tc-tilegx.h (TARGET_BYTES_BIG_ENDIAN): Guard definition with
+ ifndef.
+ (md_number_to_chars): Delete.
+ * configure.tgt (tilegx*be): Handle.
+ * doc/as.texinfo [TILE-Gx]: Document -EB and -EL.
+ * doc/c-tilegx.texi: Ditto.
+
+2012-02-21 H.J. Lu <hongjiu.lu@intel.com>
+
+ * config/tc-i386.c (check_hle): Use HLEPrefixNone, HLEPrefixLock,
+ HLEPrefixAny and HLEPrefixRelease.
+
+2012-02-21 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
+
+ * gas/config/tc-arm.h (DOUBLESLASH_LINE_COMMENTS): Define.
+
+2012-02-21 Iain Sandoe <idsandoe@googlemail.com>
+
+ * write.c (write_object_file): Add md_pre_output_hook.
+ * config/obj-macho.c (obj_mach_o_check_before_writing): New.
+ (obj_mach_o_pre_output_hook): New.
+ * config/obj-macho.h (md_pre_output_hook): Define.
+ (obj_mach_o_pre_output_hook): Declare.
+
+2012-02-21 Tristan Gingold <gingold@adacore.com>
+
+ * config/tc-i386.h (OBJ_MACH_O): New section.
+ (TC_FORCE_RELOCATION): Use obj_mach_o_force_reloc.
+ (TC_FORCE_RELOCATION_SUB_SAME): New
+ (TC_FORCE_RELOCATION_SUB_LOCAL): New.
+ (TC_VALIDATE_FIX_SUB): New.
+ * frags.h (struct frag): OBJ_FRAG_TYPE, new field.
+ * symbols.c (colon): obj_frob_colon: New hook.
+ * write.c (write_object_file): md_pre_relax_hook, new
+ hook.
+ * config/obj-macho.c (obj_mach_o_frob_colon): New.
+ (obj_mach_o_frob_label): Record sub-section labels.
+ (obj_mach_o_frob_symbol): Rename from obj_macho_frob_symbol.
+ (obj_mach_o_set_subsections): New.
+ (obj_mach_o_pre_relax_hook): New.
+ (obj_mach_o_in_different_subsection): New.
+ (obj_mach_o_force_reloc_sub_same): New.
+ (obj_mach_o_force_reloc_sub_local): New.
+ (obj_mach_o_force_reloc): New.
+ * config/obj-macho.h (OBJ_SYMFIELD_TYPE): New.
+ (obj_frob_colon): New Define.
+ (obj_mach_o_frob_label): Renamed.
+ (obj_mach_o_frob_symbol): Renamed.
+ (OBJ_FRAG_TYPE): New.
+ (obj_mach_o_in_different_subsection, obj_mach_o_force_reloc,
+ obj_mach_o_force_reloc_sub_same,
+ obj_mach_o_force_reloc_sub_local): New declarations.
+
+2012-02-20 Iain Sandoe <idsandoe@googlemail.com>
+
+ * config/obj-macho.c (obj_mach_o_is_frame_section): New.
+ (obj_mach_o_allow_local_subtract): New.
+ * config/obj-macho.h (md_allow_local_subtract): Define.
+ (obj_mach_o_allow_local_subtract): Declare.
+
+2012-02-20 Iain Sandoe <idsandoe@googlemail.com>
+
+ * config/obj-macho.c (obj_mach_o_make_or_get_sect): In the absence of
+ canonical information, try to determine CODE and DEBUG section flags
+ from the mach-o section data.
+
+2012-02-20 Nick Clifton <nickc@redhat.com>
+
+ * cgen.c (gas_cgen_parse_operand): Do not set BSF_RELC flag on
+ local symbols.
+
+2012-02-12 Iain Sandoe <idsandoe@googlemail.com>
+
+ * config/obj-macho.c (obj_mach_o_indirect_symbol): Force promotion of
+ any local symbol used as an indirect.
+
+2012-02-10 Iain Sandoe <idsandoe@googlemail.com>
+
+ * config/obj-macho.c (obj_mach_o_make_or_get_sect): Always fill in
+ stub size when provided. (obj_mach_o_section): Flag that stub-size
+ has been provided.
+
+2012-02-08 H.J. Lu <hongjiu.lu@intel.com>
+
+ * config/tc-i386.c (HLE_PREFIX): New.
+ (check_hle): Likewise.
+ (_i386_insn): Add have_hle.
+ (cpu_arch): Add .hle and .rtm.
+ (md_assemble): Call check_hle if i.have_hle isn't zero.
+ (parse_insn): Set i.have_hle to 1 for HLE prefix.
+ (output_jump): Support up to 2 byte opcode.
+
+ * doc/c-i386.texi: Document hle/.hle and rtm/.rtm.
+
+2012-02-02 Tristan Gingold <gingold@adacore.com>
+
+ * config/obj-macho.c (obj_mach_o_zerofill): Silent
+ uninitialized variable warning.
+
+2012-02-02 Nick Clifton <nickc@redhat.com>
+
+ PR gas/13224
+ * config/obj-elf.c (obj_elf_parse_section_letters): Rename 'clone'
+ to 'is_clone' to avoid shadowing a gloabl.
+ (obj_elf_section): Likewise.
+
+2012-01-31 Paul Brook <paul@codesourcery.com>
+
+ * doc/c-tic6x.c: Fix typo.
+
+2012-01-26 Alexey Makhalov <makhaloff@gmail.com>
+
+ PR gas/13624
+ * app.c (app_push): Set 'add_newlines' to zero after saving.
+
+2012-01-24 DJ Delorie <dj@redhat.com>
+
+ * config/rl78-parse.y (NOT1): Add.
+