Implement Intel SMAP instructions
[deliverable/binutils-gdb.git] / gas / config / tc-hppa.h
index 9b3edc1878f5c5e47fc635b689a599521984bd91..78d9edfda924efc8123fe6f9148d2a72a2c7d9bd 100644 (file)
@@ -1,12 +1,13 @@
 /* tc-hppa.h -- Header file for the PA
    Copyright 1989, 1993, 1994, 1995, 1997, 1998, 1999, 2000, 2001, 2002,
 /* tc-hppa.h -- Header file for the PA
    Copyright 1989, 1993, 1994, 1995, 1997, 1998, 1999, 2000, 2001, 2002,
-   2003, 2004, 2005 Free Software Foundation, Inc.
+   2003, 2004, 2005, 2006, 2007, 2008, 2009, 2012
+   Free Software Foundation, Inc.
 
    This file is part of GAS, the GNU Assembler.
 
    GAS is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
 
    This file is part of GAS, the GNU Assembler.
 
    GAS is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 1, or (at your option)
+   the Free Software Foundation; either version 3, or (at your option)
    any later version.
 
    GAS is distributed in the hope that it will be useful,
    any later version.
 
    GAS is distributed in the hope that it will be useful,
 #define ASEC_NULL (asection *)0
 
 /* pa_define_label gets used outside of tc-hppa.c via tc_frob_label.  */
 #define ASEC_NULL (asection *)0
 
 /* pa_define_label gets used outside of tc-hppa.c via tc_frob_label.  */
-extern void pa_define_label PARAMS ((symbolS *));
-
-extern void parse_cons_expression_hppa PARAMS ((expressionS *));
-extern void cons_fix_new_hppa PARAMS ((fragS *, int, int, expressionS *));
-extern int hppa_force_relocation PARAMS ((struct fix *));
+extern void pa_define_label (symbolS *);
+extern void parse_cons_expression_hppa (expressionS *);
+extern void cons_fix_new_hppa (fragS *, int, int, expressionS *);
+extern int hppa_force_relocation (struct fix *);
 
 /* This gets called before writing the object file to make sure
    things like entry/exit and proc/procend pairs match.  */
 
 /* This gets called before writing the object file to make sure
    things like entry/exit and proc/procend pairs match.  */
-extern void pa_check_eof PARAMS ((void));
+extern void pa_check_eof (void);
 #define tc_frob_file pa_check_eof
 
 #define tc_frob_label(sym) pa_define_label (sym)
 #define tc_frob_file pa_check_eof
 
 #define tc_frob_label(sym) pa_define_label (sym)
@@ -120,7 +120,7 @@ extern const char   hppa_symbol_chars[];
    When used in an instruction it will always follow a comma.  */
 #define TC_EOL_IN_INSN(PTR)    (*(PTR) == '!' && (PTR)[-1] == ',')
 
    When used in an instruction it will always follow a comma.  */
 #define TC_EOL_IN_INSN(PTR)    (*(PTR) == '!' && (PTR)[-1] == ',')
 
-int hppa_fix_adjustable PARAMS((struct fix *));
+int hppa_fix_adjustable (struct fix *);
 #define tc_fix_adjustable hppa_fix_adjustable
 
 #define EXTERN_FORCE_RELOC 1
 #define tc_fix_adjustable hppa_fix_adjustable
 
 #define EXTERN_FORCE_RELOC 1
@@ -138,8 +138,8 @@ int hppa_fix_adjustable PARAMS((struct fix *));
    *not* end up in the symbol table.  Likewise for absolute symbols
    with local scope.  */
 #define tc_frob_symbol(sym,punt) \
    *not* end up in the symbol table.  Likewise for absolute symbols
    with local scope.  */
 #define tc_frob_symbol(sym,punt) \
-    if ((S_GET_SEGMENT (sym) == &bfd_und_section && ! symbol_used_p (sym)) \
-       || (S_GET_SEGMENT (sym) == &bfd_abs_section \
+    if ((S_GET_SEGMENT (sym) == bfd_und_section_ptr && ! symbol_used_p (sym)) \
+       || (S_GET_SEGMENT (sym) == bfd_abs_section_ptr \
            && ! S_IS_EXTERNAL (sym))) \
       punt = 1
 
            && ! S_IS_EXTERNAL (sym))) \
       punt = 1
 
@@ -147,14 +147,23 @@ int hppa_fix_adjustable PARAMS((struct fix *));
    two symbols.  This includes the difference of two symbols when
    one of them is undefined (this comes up in PIC code generation).
 
    two symbols.  This includes the difference of two symbols when
    one of them is undefined (this comes up in PIC code generation).
 
-   We don't define DIFF_EXPR_OK because it does the wrong thing if
-   the add symbol is undefined and the sub symbol is a symbol in
-   the same section as the relocation.  We also need some way to
-   specialize some code in adjust_reloc_syms.  */
+   We allow the difference of two symbols when the subtract symbol is
+   local to the relocation.  This is implemented using R_HPPA_COMPLEX.
+
+   This has some limitations.  Difference expressions only work between
+   symbols in the same segment/quadrant of a module since the HP dynamic
+   loader relocates the text and data segments independently.  Thus, a
+   difference expression can't be used between text and data symbols,
+   or between symbols in different executable modules.  */
+#define DIFF_EXPR_OK 1
+#define TC_FORCE_RELOCATION_SUB_LOCAL(FIX, SEG) 1
 #define UNDEFINED_DIFFERENCE_OK
 #endif
 
 #ifdef OBJ_ELF
 #define UNDEFINED_DIFFERENCE_OK
 #endif
 
 #ifdef OBJ_ELF
+
+/* Difference expressions for the 64-bit HP-UX target have the same
+   limitations as those for the 32-bit SOM target.  */
 #define DIFF_EXPR_OK 1
 
 /* Handle .type psuedo.  Given a type string of `millicode', set the
 #define DIFF_EXPR_OK 1
 
 /* Handle .type psuedo.  Given a type string of `millicode', set the
@@ -170,19 +179,22 @@ int hppa_fix_adjustable PARAMS((struct fix *));
 
 #define tc_frob_symbol(sym,punt) \
   { \
 
 #define tc_frob_symbol(sym,punt) \
   { \
-    if ((S_GET_SEGMENT (sym) == &bfd_und_section && ! symbol_used_p (sym) && \
-        ELF_ST_VISIBILITY (S_GET_OTHER (sym)) == STV_DEFAULT) \
-       || (S_GET_SEGMENT (sym) == &bfd_abs_section \
-           && ! S_IS_EXTERNAL (sym)) \
+    if ((S_GET_SEGMENT (sym) == bfd_und_section_ptr \
+         && ! symbol_used_p (sym) \
+         && ELF_ST_VISIBILITY (S_GET_OTHER (sym)) == STV_DEFAULT) \
        || strcmp (S_GET_NAME (sym), "$global$") == 0 \
        || strcmp (S_GET_NAME (sym), "$global$") == 0 \
-       || strcmp (S_GET_NAME (sym), "$PIC_pcrel$0") == 0) \
+       || strcmp (S_GET_NAME (sym), "$segrel$") == 0 \
+       || strcmp (S_GET_NAME (sym), "$PIC_pcrel$0") == 0 \
+       || strcmp (S_GET_NAME (sym), "$tls_gdidx$") == 0 \
+       || strcmp (S_GET_NAME (sym), "$tls_ldidx$") == 0 \
+       || strcmp (S_GET_NAME (sym), "$tls_dtpoff$") == 0 \
+       || strcmp (S_GET_NAME (sym), "$tls_ieoff$") == 0 \
+       || strcmp (S_GET_NAME (sym), "$tls_leoff$") == 0) \
       punt = 1; \
   }
 
 #define elf_tc_final_processing        elf_hppa_final_processing
       punt = 1; \
   }
 
 #define elf_tc_final_processing        elf_hppa_final_processing
-void elf_hppa_final_processing PARAMS ((void));
-
-#define DWARF2_LINE_MIN_INSN_LENGTH 4
+void elf_hppa_final_processing (void);
 #endif /* OBJ_ELF */
 
 #define md_operand(x)
 #endif /* OBJ_ELF */
 
 #define md_operand(x)
@@ -191,10 +203,38 @@ void elf_hppa_final_processing PARAMS ((void));
    A silly fudge required for backwards compatibility.  */
 #define md_optimize_expr hppa_force_reg_syms_absolute
 
    A silly fudge required for backwards compatibility.  */
 #define md_optimize_expr hppa_force_reg_syms_absolute
 
-int hppa_force_reg_syms_absolute
-  PARAMS ((expressionS *, operatorT, expressionS *));
+int hppa_force_reg_syms_absolute (expressionS *, operatorT, expressionS *);
 
 
-#define TC_FIX_TYPE PTR
+#define TC_FIX_TYPE void *
 #define TC_INIT_FIX_DATA(FIX) ((FIX)->tc_fix_data = NULL)
 
 #define TC_INIT_FIX_DATA(FIX) ((FIX)->tc_fix_data = NULL)
 
+#ifdef OBJ_ELF
+#define TARGET_USE_CFIPOP 1
+
+#define tc_cfi_frame_initial_instructions hppa_cfi_frame_initial_instructions
+extern void hppa_cfi_frame_initial_instructions (void);
+
+#define tc_regname_to_dw2regnum hppa_regname_to_dw2regnum
+extern int hppa_regname_to_dw2regnum (char *regname);
+
+#define DWARF2_LINE_MIN_INSN_LENGTH 4
+#define DWARF2_DEFAULT_RETURN_COLUMN 2
+#if TARGET_ARCH_SIZE == 64
+#define DWARF2_CIE_DATA_ALIGNMENT 8
+#define DWARF2_FDE_RELOC_SIZE 8
+#else
+#define DWARF2_CIE_DATA_ALIGNMENT 4
+#endif
+
+#if !defined (TE_LINUX) && !defined (TE_NetBSD)
+/* Due to the way dynamic linking to personality functions is handled
+   on HP-UX, we need to have a read-write .eh_frame section.  */
+#define DWARF2_EH_FRAME_READ_ONLY 0
+
+/* Because differences between text and data symbols don't work, we
+   can't use difference expressions during CFI generation.  */
+#define CFI_DIFF_EXPR_OK 0
+#endif
+
+#endif /* OBJ_ELF */
 #endif /* _TC_HPPA_H */
 #endif /* _TC_HPPA_H */
This page took 0.025332 seconds and 4 git commands to generate.