* dw2gencfi.c (CFI_DIFF_EXPR_OK): Define if not defined.
[deliverable/binutils-gdb.git] / gas / configure.in
index 0917fb83f79b4e64317a14d60e594a49b29e8ce3..1203893e753a34821ceddeeeea3b9fd5162a898f 100644 (file)
@@ -5,10 +5,15 @@ dnl brackets, be sure changequote invocations surround it.
 dnl
 dnl
 dnl v2.5 needed for --bindir et al
 dnl
 dnl
 dnl v2.5 needed for --bindir et al
-AC_PREREQ(2.13)
-AC_INIT(as.h)
-
-AC_CANONICAL_SYSTEM
+AC_PREREQ(2.59)
+AC_INIT
+AC_CONFIG_SRCDIR(as.h)
+
+dnl Autoconf 2.57 will find the aux dir without this.  However, unless
+dnl we specify this explicitly, automake-1.7 will assume that ylwrap is in
+dnl gas/ instead of gas/../.
+AC_CONFIG_AUX_DIR(..)
+AC_CANONICAL_TARGET
 AC_ISC_POSIX
 
 changequote(,)dnl
 AC_ISC_POSIX
 
 changequote(,)dnl
@@ -16,24 +21,21 @@ BFD_VERSION=`sed -n -e 's/^.._INIT_AUTOMAKE.*,[     ]*\([^  ]*\)[   ]*).*/\1/p' < ${
 changequote([,])dnl
 AM_INIT_AUTOMAKE(gas, ${BFD_VERSION})
 
 changequote([,])dnl
 AM_INIT_AUTOMAKE(gas, ${BFD_VERSION})
 
-AM_PROG_LIBTOOL
+AC_PROG_CC
+AC_GNU_SOURCE
+AC_USE_SYSTEM_EXTENSIONS
+
+LT_INIT
 
 
-user_bfd_gas=
-AC_ARG_ENABLE(bfd-assembler,
-[  --enable-bfd-assembler  use BFD back end for writing object files],
-[case "${enableval}" in
-  yes) need_bfd=yes user_bfd_gas=yes ;;
-  no)  user_bfd_gas=no ;;
-  *)   AC_MSG_ERROR(bad value ${enableval} given for bfd-assembler option) ;;
-esac])dnl
 AC_ARG_ENABLE(targets,
 AC_ARG_ENABLE(targets,
-[    targets            alternative target configurations besides the primary],
+[  --enable-targets        alternative target configurations besides the primary],
 [case "${enableval}" in
 [case "${enableval}" in
-  yes | "") AC_ERROR(enable-targets option must specify target names or 'all')
+  yes | "") AC_MSG_ERROR(enable-targets option must specify target names or 'all')
            ;;
   no)      enable_targets= ;;
   *)       enable_targets=$enableval ;;
 esac])dnl
            ;;
   no)      enable_targets= ;;
   *)       enable_targets=$enableval ;;
 esac])dnl
+
 AC_ARG_ENABLE(commonbfdlib,
 [  --enable-commonbfdlib   build shared BFD/opcodes/libiberty library],
 [case "${enableval}" in
 AC_ARG_ENABLE(commonbfdlib,
 [  --enable-commonbfdlib   build shared BFD/opcodes/libiberty library],
 [case "${enableval}" in
@@ -42,42 +44,44 @@ AC_ARG_ENABLE(commonbfdlib,
   *)   AC_MSG_ERROR([bad value ${enableval} for BFD commonbfdlib option]) ;;
 esac])dnl
 
   *)   AC_MSG_ERROR([bad value ${enableval} for BFD commonbfdlib option]) ;;
 esac])dnl
 
-using_cgen=no
-
-build_warnings="-W -Wall -Wstrict-prototypes -Wmissing-prototypes"
-AC_ARG_ENABLE(build-warnings,
-[  --enable-build-warnings Enable build-time compiler warnings if gcc is used],
+ac_checking=yes
+if grep '^RELEASE=y' ${srcdir}/../bfd/Makefile.am >/dev/null 2>/dev/null ; then
+  ac_checking=
+fi
+AC_ARG_ENABLE(checking,
+[  --enable-checking       enable run-time checks],
 [case "${enableval}" in
 [case "${enableval}" in
-  yes) ;;
-  no)  build_warnings="-w";;
-  ,*)   t=`echo "${enableval}" | sed -e "s/,/ /g"`
-        build_warnings="${build_warnings} ${t}";;
-  *,)   t=`echo "${enableval}" | sed -e "s/,/ /g"`
-        build_warnings="${t} ${build_warnings}";;
-  *)    build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
-esac
-if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then
-  echo "Setting warning flags = $build_warnings" 6>&1
-fi])dnl
-WARN_CFLAGS=""
-if test "x${build_warnings}" != x -a "x$GCC" = xyes ; then
-    WARN_CFLAGS="${build_warnings}"
+  no|none)  ac_checking= ;;
+  *)       ac_checking=yes ;;
+esac])dnl
+if test x$ac_checking != x ; then
+  AC_DEFINE(ENABLE_CHECKING, 1, [Define if you want run-time sanity checks.])
 fi
 fi
-AC_SUBST(WARN_CFLAGS)
+
+using_cgen=no
+
+AM_BINUTILS_WARNINGS
 
 # Generate a header file
 
 # Generate a header file
-AM_CONFIG_HEADER(config.h:config.in)
+AC_CONFIG_HEADERS(config.h:config.in)
 
 # If we are on a DOS filesystem, we must use gdb.ini rather than
 # .gdbinit.
 
 # If we are on a DOS filesystem, we must use gdb.ini rather than
 # .gdbinit.
-GDBINIT=".gdbinit"
 case "${host}" in
   *-*-msdos* | *-*-go32* | *-*-mingw32* | *-*-windows*)
     GDBINIT="gdb.ini"
 case "${host}" in
   *-*-msdos* | *-*-go32* | *-*-mingw32* | *-*-windows*)
     GDBINIT="gdb.ini"
+    AC_CONFIG_FILES(gdb.ini:gdbinit.in)
+    ;;
+  *)
+    GDBINIT=".gdbinit"
+    AC_CONFIG_FILES(.gdbinit:gdbinit.in)
     ;;
 esac
 AC_SUBST(GDBINIT)
 
     ;;
 esac
 AC_SUBST(GDBINIT)
 
+#We need this for the host.  BOUT header is in host order.
+AC_C_BIGENDIAN
+
 te_file=generic
 
 # Makefile target for installing gas in $(tooldir)/bin.
 te_file=generic
 
 # Makefile target for installing gas in $(tooldir)/bin.
@@ -106,53 +110,14 @@ emulations=""
 
 for this_target in $target $canon_targets ; do
 
 
 for this_target in $target $canon_targets ; do
 
-changequote(,)dnl
-    eval `echo $this_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/cpu=\1 vendor=\2 os=\3/'`
-changequote([,])dnl
+    targ=${this_target}
+    . ${srcdir}/configure.tgt
 
 
-    # check for architecture variants
-    arch=
-    endian=
-    case ${cpu} in
-      alpha*)          cpu_type=alpha ;;
-      arm*b|xscale*b|strongarm*b) cpu_type=arm endian=big ;;
-      arm*|xscale*|strongarm*)    cpu_type=arm endian=little ;;
-      hppa*)           cpu_type=hppa ;;
-changequote(,)dnl
-      i[3456]86)       cpu_type=i386 arch=i386;;
-      x86_64)          cpu_type=i386 arch=x86_64;;
-      ia64)            cpu_type=ia64 ;;
-      ip2k)             cpu_type=ip2k endian=big ;; 
-      m6811|m6812|m68hc12) cpu_type=m68hc11 ;;
-      m680[012346]0)   cpu_type=m68k ;;
-changequote([,])dnl
-      m68008)          cpu_type=m68k ;;
-      m683??)          cpu_type=m68k ;;
-      m5200)           cpu_type=m68k ;;
-      m8*)             cpu_type=m88k ;;
-      mips*el)         cpu_type=mips endian=little ;;
-      mips*)           cpu_type=mips endian=big ;;
-      or32*)           cpu_type=or32 endian=big ;;
-      pjl*)            cpu_type=pj endian=little ;;
-      pj*)             cpu_type=pj endian=big ;;
-      powerpc*le*)     cpu_type=ppc endian=little ;;
-      powerpc*)                cpu_type=ppc endian=big ;;
-      rs6000*)         cpu_type=ppc ;;
-      s390x*)          cpu_type=s390 arch=s390x ;;
-      s390*)           cpu_type=s390 arch=s390 ;;
-      sh5*)            cpu_type=sh64 endian=big ;;
-      sh5le*)          cpu_type=sh64 endian=little ;;
-      sh64*)            cpu_type=sh64 endian=big ;;
-      sh64le*)         cpu_type=sh64 endian=little ;;
-      sh*le)           cpu_type=sh endian=little ;;
-      sh*)             cpu_type=sh endian=big ;;
-      sparclite*)      cpu_type=sparc arch=sparclite ;;
-      sparclet*)       cpu_type=sparc arch=sparclet ;;
-      sparc64*)                cpu_type=sparc arch=v9-64 ;;
-      sparc86x*)       cpu_type=sparc arch=sparc86x  ;;
-      sparc*)          cpu_type=sparc arch=sparclite ;; # ??? See tc-sparc.c.
-      v850*)           cpu_type=v850 ;;
-      *)               cpu_type=${cpu} ;;
+    case ${target_cpu} in
+      crisv32)
+       AC_DEFINE_UNQUOTED(DEFAULT_CRIS_ARCH, $arch,
+                          [Default CRIS architecture.])
+       ;;
     esac
 
     if test ${this_target} = $target ; then
     esac
 
     if test ${this_target} = $target ; then
@@ -161,330 +126,53 @@ changequote([,])dnl
       continue
     fi
 
       continue
     fi
 
-    generic_target=${cpu_type}-$vendor-$os
-    dev=no
-    bfd_gas=no
-    em=generic
-
-    # assign object format
+    generic_target=${cpu_type}-${target_vendor}-${target_os}
     case ${generic_target} in
     case ${generic_target} in
-      a29k-*-coff)                     fmt=coff ;;
-      a29k-amd-udi)                    fmt=coff ;;
-      a29k-amd-ebmon)                  fmt=coff ;;
-      a29k-nyu-sym1)                   fmt=coff ;;
-      a29k-*-rtems*)                   fmt=coff ;;
-      a29k-*-vxworks*)                 fmt=coff ;;
-
-      alpha*-*-*vms*)                  fmt=evax ;;
-      alpha*-*-netware*)               fmt=ecoff ;;
-      alpha*-*-osf*)                   fmt=ecoff ;;
-      alpha*-*-linuxecoff*)            fmt=ecoff ;;
-      alpha*-*-linux-gnu*)             fmt=elf em=linux ;;
-      alpha*-*-netbsd*)                        fmt=elf em=nbsd ;;
-      alpha*-*-openbsd*)               fmt=elf em=obsd ;;
-
-      arc-*-elf*)                      fmt=elf ;;
-
-      arm-*-aout)                      fmt=aout ;;
-      arm-*-coff | thumb-*-coff)       fmt=coff ;;
-      arm-*-rtems | thumb-*-rtems)     fmt=elf ;;
-      arm-*-elf | thumb-*-elf)         fmt=elf ;;
-      arm*-*-conix*)                   fmt=elf ;;
-      arm-*-linux*aout*)               fmt=aout em=linux ;;
-      arm*-*-linux-gnu*)               fmt=elf  em=linux ;;
-      arm*-*-uclinux*)                 fmt=elf  em=linux ;;
-      arm-*-netbsdelf*)                 fmt=elf  em=nbsd ;;
-      arm-*-*n*bsd*)                   fmt=aout em=nbsd ;;
-      arm-**-nto*)                     fmt=elf ;;
-      arm-*-oabi | thumb-*-oabi)       fmt=elf ;;
-      arm-epoc-pe | thumb-epoc-pe)     fmt=coff em=epoc-pe ;;
-      arm-*-wince)                     fmt=coff em=wince-pe ;;
-      arm-*-pe | thumb-*-pe)           fmt=coff em=pe ;;
-      arm-*-riscix*)                   fmt=aout em=riscix ;;
-      arm-*-vxworks)                   fmt=coff ;;
-
-      avr-*-*)                         fmt=elf ;;
-
-      cris-*-*)                                fmt=multi bfd_gas=yes ;;
-
-      d10v-*-*)                                fmt=elf ;;
-      d30v-*-*)                                fmt=elf ;;
-      dlx-*-*)                         fmt=elf ;;
-
-      fr30-*-*)                                fmt=elf ;;
-      frv-*-*)                         fmt=elf ;;
-
-      hppa-*-linux*)   case ${cpu} in
-                           hppa*64*)   fmt=elf em=hppalinux64;;
-                           hppa*)      fmt=elf em=linux;;
-                       esac ;;
-      hppa-*-*elf*)                    fmt=elf em=hppa ;;
-      hppa-*-lites*)                   fmt=elf em=hppa ;;
-      hppa-*-netbsd*)                  fmt=elf em=nbsd ;;
-      hppa-*-openbsd*)                 fmt=elf em=hppa ;;
-      hppa-*-osf*)                     fmt=som em=hppa ;;
-      hppa-*-rtems*)                   fmt=elf em=hppa ;;
-      hppa-*-hpux11*)  case ${cpu} in
-                           hppa*64*)   fmt=elf em=hppa64 ;;
-                           hppa*)      fmt=som em=hppa ;;
-                       esac ;;
-      hppa-*-hpux*)                    fmt=som em=hppa ;;
-      hppa-*-mpeix*)                   fmt=som em=hppa ;;
-      hppa-*-bsd*)                     fmt=som em=hppa ;;
-      hppa-*-hiux*)                    fmt=som em=hppa ;;
-
-      h8300-*-rtems*)                  fmt=coff ;;
-      h8300-*-coff)                    fmt=coff ;;
-      h8300-*-elf)                     fmt=elf ;;
-      h8500-*-rtems*)                  fmt=coff ;;
-      h8500-*-coff)                    fmt=coff ;;
-
-      i370-*-elf* | i370-*-linux*)     fmt=elf ;;
-      i386-ibm-aix*)                   fmt=coff em=i386aix ;;
-      i386-sequent-bsd*)               fmt=aout em=dynix ;;
-      i386-*-beospe*)                  fmt=coff em=pe ;;
-      i386-*-beos*)                    fmt=elf ;;
-      i386-*-coff)                     fmt=coff ;;
-      i386-*-elf)                      fmt=elf ;;
-      i386-*-bsd*)                     fmt=aout em=386bsd ;;
-      i386-*-netbsd0.8)                        fmt=aout em=386bsd ;;
-      i386-*-netbsdpe*)                        fmt=coff em=pe ;;
-      i386-*-netbsdelf*)               fmt=elf em=nbsd ;;
-      i386-*-*n*bsd*)  case ${cpu} in
-                           x86_64)     fmt=elf em=nbsd ;;
-                           *)          fmt=aout em=nbsd ;;
-                       esac ;;
-      i386-*-linux*aout*)              fmt=aout em=linux ;;
-      i386-*-linux*oldld)              fmt=aout em=linux ;;
-      i386-*-linux*coff*)              fmt=coff em=linux ;;
-      i386-*-linux-gnu*)               fmt=elf em=linux ;;
-      x86_64-*-linux-gnu*)             fmt=elf em=linux ;;
-      i386-*-lynxos*)                  fmt=coff em=lynx ;;
-changequote(,)dnl
-      i386-*-sysv[45]*)                        fmt=elf ;;
-      i386-*-solaris*)                 fmt=elf ;;
-      i386-*-freebsdaout*)             fmt=aout em=386bsd ;;
-      i386-*-freebsd[12].*)            fmt=aout em=386bsd ;;
-      i386-*-freebsd[12])              fmt=aout em=386bsd ;;
-changequote([,])dnl
-      i386-*-sysv*)                    fmt=coff ;;
-      i386-*-sco3.2v5*coff)            fmt=coff ;;
-      i386-*-isc*)                     fmt=coff ;;
-      i386-*-sco3.2v5*)                        fmt=elf
-         if test ${this_target} = $target; then
-           AC_DEFINE(SCO_ELF, 1, [Define if defaulting to ELF on SCO 5.])
-         fi ;;
-      i386-*-sco3.2*)                  fmt=coff ;;
-      i386-*-vsta)                     fmt=aout ;;
+      i386-*-sco3.2v5*)
+       if test ${this_target} = $target; then
+         AC_DEFINE(SCO_ELF, 1, [Define if defaulting to ELF on SCO 5.])
+       fi
+       ;;
+
       i386-*-msdosdjgpp* \
       | i386-*-go32* \
       i386-*-msdosdjgpp* \
       | i386-*-go32* \
-      | i386-go32-rtems*)              fmt=coff em=go32
-           AC_DEFINE(STRICTCOFF, 1, [Using strict COFF?]) ;;
-      i386-*-rtemself*)                        fmt=elf ;;
-      i386-*-rtemscoff*)               fmt=coff ;;
-      i386-*-rtems*)                   fmt=elf ;;
-      i386-*-gnu*)                     fmt=elf ;;
-      i386-*-mach*)                    fmt=aout em=mach ;;
-      i386-*-msdos*)                   fmt=aout ;;
-      i386-*-moss*)                    fmt=elf ;;
-      i386-*-pe)                       fmt=coff em=pe ;;
-      i386-*-cygwin*)                  fmt=coff em=pe ;;
-      i386-*-interix*)                 fmt=coff em=interix ;;
-      i386-*-mingw32*)                 fmt=coff em=pe ;;
-      i386-*-nto-qnx*)                 fmt=elf ;;
-      i386-*-*nt*)                     fmt=coff em=pe ;;
-      i386-*-vxworks*)                 fmt=aout ;;
-      i386-*-chaos)                    fmt=elf ;;
-
-      i860-*-*)                                fmt=elf endian=little
-               AC_MSG_WARN(GAS support for ${generic_target} is preliminary and a work in progress) ;;
-      i960-*-bout)                     fmt=bout ;;
-      i960-*-coff)                     fmt=coff em=ic960 ;;
-      i960-*-rtems*)                   fmt=coff em=ic960 ;;
-      i960-*-nindy*)                   fmt=bout ;;
-      i960-*-vxworks5.0)               fmt=bout ;;
-      i960-*-vxworks5.*)               fmt=coff em=ic960 ;;
-      i960-*-vxworks*)                 fmt=bout ;;
-      i960-*-elf*)                     fmt=elf ;;
-
-      ia64-*-elf*)                     fmt=elf ;;
-      ia64-*-aix*)                     fmt=elf em=ia64aix ;;
-      ia64-*-linux-gnu*)               fmt=elf em=linux ;;
-      ia64-*-hpux*)                    fmt=elf em=hpux ;;
-      ia64-*-netbsd*)                  fmt=elf em=nbsd ;;
-
-      ip2k-*-*)                                fmt=elf ;;
-
-      m32r-*-*)                                fmt=elf ;;
-
-      m68hc11-*-* | m6811-*-*)         fmt=elf ;;
-      m68hc12-*-* | m6812-*-*)         fmt=elf ;;
-
-      m68k-*-vxworks*)                 fmt=aout em=sun3 ;;
-      m68k-ericsson-ose)               fmt=aout em=sun3 ;;
-      m68k-*-sunos*)                   fmt=aout em=sun3 ;;
-      m68k-motorola-sysv*)             fmt=coff em=delta ;;
-      m68k-bull-sysv3*)                        fmt=coff em=dpx2 ;;
-      m68k-apollo-*)                   fmt=coff em=apollo ;;
-      m68k-*-elf*)                     fmt=elf ;;
-      m68k-*-sysv4*)                   fmt=elf em=svr4 ;;
-      m68k-*-sysv*)                    fmt=coff ;;
-      m68k-*-coff | m68k-*-rtemscoff*) fmt=coff ;;
-      m68k-*-rtems*)                   fmt=elf ;;
-      m68k-*-hpux*)                    fmt=hp300 em=hp300 ;;
-      m68k-*-linux*aout*)              fmt=aout em=linux ;;
-      m68k-*-linux-gnu*)               fmt=elf em=linux ;;
-      m68k-*-gnu*)                     fmt=elf ;;
-      m68k-*-lynxos*)                  fmt=coff em=lynx ;;
-      m68k-*-netbsdelf*)               fmt=elf em=nbsd ;;
-      m68k-*-netbsd*)                  fmt=aout em=nbsd bfd_gas=yes ;;
-      m68k-*-openbsd*)                 fmt=aout em=nbsd bfd_gas=yes ;;
-      m68k-apple-aux*)                 fmt=coff em=aux ;;
-      m68k-*-psos*)                    fmt=elf em=psos;;
-
-      m88k-motorola-sysv3*)            fmt=coff em=delt88 ;;
-      m88k-*-coff*)                    fmt=coff ;;
-
-      mcore-*-elf)                     fmt=elf ;;
-      mcore-*-pe)                      fmt=coff em=pe bfd_gas=yes ;;
-
-      # don't change em like *-*-bsd does
-      mips-dec-openbsd*)               fmt=elf endian=little ;;
-      mips-dec-bsd*)                   fmt=aout endian=little ;;
-      mips-sony-bsd*)                  fmt=ecoff ;;
+      | i386-go32-rtems*)
+       AC_DEFINE(STRICTCOFF, 1, [Using strict COFF?])
+       ;;
+
+      i860-*-*)
+       AC_MSG_WARN(GAS support for ${generic_target} is preliminary and a work in progress)
+       ;;
+
+      mips-sony-bsd*)
+       ;;
       mips-*-bsd*)
       mips-*-bsd*)
-           AC_MSG_ERROR(Unknown vendor for mips-bsd configuration.) ;;
-      mips-*-ultrix*)                  fmt=ecoff endian=little ;;
-      mips-*-osf*)                     fmt=ecoff endian=little ;;
-      mips-*-ecoff*)                   fmt=ecoff ;;
-      mips-*-pe*)                      fmt=coff endian=little em=pe ;;
-      mips-*-irix6*)                   fmt=elf ;;
-      mips-*-irix5*)                   fmt=elf ;;
-      mips-*-irix*)                    fmt=ecoff ;;
-      mips-*-lnews*)                   fmt=ecoff em=lnews ;;
-      mips-*-riscos*)                  fmt=ecoff ;;
-      mips*-*-linux*)                  fmt=elf em=tmips ;;
-      mips-*-sysv4*MP* | mips-*-gnu*)  fmt=elf em=tmips ;;
-      mips-*-sysv*)                    fmt=ecoff ;;
-      mips-*-elf* | mips-*-rtems*)     fmt=elf ;;
-      mips-*-*n*bsd*)                  fmt=elf ;;
-      mips-*-vxworks*)                 fmt=elf ;;
-
-      mmix-*-*)                                fmt=elf ;;
-      mn10200-*-*)                     fmt=elf ;;
-      mn10300-*-*)                     fmt=elf ;;
-      msp430-*-*)                      fmt=elf ;;
-      openrisc-*-*)                    fmt=elf ;;
-      or32-*-rtems*)                   fmt=coff ;;
-      or32-*-coff)                     fmt=coff ;;
-      or32-*-elf)                      fmt=elf ;;
-      pj*)                             fmt=elf ;;
-
-      ppc-*-pe | ppc-*-cygwin*)                fmt=coff em=pe ;;
-      ppc-*-winnt*)                    fmt=coff em=pe ;;
-      ppc-*-aix5*)                     fmt=coff em=aix5 ;;
-      ppc-*-aix*)                      fmt=coff ;;
-      ppc-*-beos*)                     fmt=coff ;;
-      ppc-*-*n*bsd* | ppc-*-elf*)      fmt=elf ;;
-      ppc-*-eabi* | ppc-*-sysv4*)      fmt=elf ;;
-      ppc-*-linux-gnu*)                        fmt=elf
-           case "$endian" in
-               big)  ;;
-               *)    AC_MSG_ERROR(GNU/Linux must be configured big endian) ;;
-           esac ;;
-      ppc-*-solaris*)                  fmt=elf
-           if test ${this_target} = $target; then
-               AC_DEFINE(TARGET_SOLARIS_COMMENT, 1,
-                         [Define if default target is PowerPC Solaris.])
-           fi
-           if test x${endian} = xbig; then
-               AC_MSG_ERROR(Solaris must be configured little endian)
-           fi ;;
-      ppc-*-rtems*)                    fmt=elf ;;
-      ppc-*-macos* | ppc-*-mpw*)       fmt=coff em=macos ;;
-      ppc-*-netware*)                  fmt=elf em=ppcnw ;;
-      ppc-**-nto*)                     fmt=elf ;;
-      ppc-*-vxworks*)                  fmt=elf ;;
-      ppc-*-windiss*)                  fmt=elf ;;
-
-      s390x-*-linux-gnu*)              fmt=elf em=linux ;;
-      s390-*-linux-gnu*)               fmt=elf em=linux ;;
-
-      sh*-*-linux*)                    fmt=elf em=linux
-           case ${cpu} in
-               sh*eb)  endian=big ;;
-               *)      endian=little ;;
-           esac ;;
-      sh5*-*-netbsd*)                  fmt=elf em=nbsd ;;
-      sh64*-*-netbsd*)                 fmt=elf em=nbsd ;;
-      sh*-*-netbsdelf*)                        fmt=elf em=nbsd ;;
-      sh-*-elf*)                       fmt=elf ;;
-      sh-*-coff*)                      fmt=coff ;;
-      sh-*-nto*)                       fmt=elf ;;
-      sh-*-pe*)                                fmt=coff em=pe bfd_gas=yes endian=little ;;
-      sh-*-rtemself*)                  fmt=elf ;;
-      sh-*-rtems*)                     fmt=coff ;;
-      sh64-*-elf*)                     fmt=elf ;;
-
-      ns32k-pc532-mach*)               fmt=aout em=pc532mach ;;
-      ns32k-pc532-ux*)                 fmt=aout em=pc532mach ;;
-      ns32k-pc532-lites*)              fmt=aout em=nbsd532 ;;
-      ns32k-*-*n*bsd*)                 fmt=aout em=nbsd532 ;;
-
-      sparc-*-rtemsaout*)              fmt=aout ;;
-      sparc-*-rtemself*)               fmt=elf ;;
-      sparc-*-rtems*)                  fmt=elf ;;
-      sparc-*-sunos4*)                 fmt=aout em=sun3 ;;
-      sparc-*-aout | sparc*-*-vxworks*)        fmt=aout em=sparcaout ;;
-      sparc-*-coff)                    fmt=coff ;;
-      sparc-*-linux*aout*)             fmt=aout em=linux ;;
-      sparc-*-linux-gnu*)              fmt=elf em=linux ;;
-      sparc-*-lynxos*)                 fmt=coff em=lynx ;;
-      sparc-fujitsu-none)              fmt=aout ;;
-      sparc-*-elf)                     fmt=elf ;;
-      sparc-*-sysv4*)                  fmt=elf ;;
-      sparc-*-solaris*)                        fmt=elf ;;
-      sparc-*-netbsdelf*)              fmt=elf em=nbsd ;;
-      sparc-*-*n*bsd*) case ${cpu} in
-                           sparc64)    fmt=elf em=nbsd ;;
-                           *)          fmt=aout em=nbsd ;;
-                       esac ;;
-      strongarm-*-coff)                        fmt=coff ;;
-      strongarm-*-elf)                 fmt=elf ;;
-      xscale-*-coff)                   fmt=coff ;;
-      xscale-*-elf)                    fmt=elf ;;
-
-      tic30-*-*aout*)                  fmt=aout bfd_gas=yes ;;
-      tic30-*-*coff*)                  fmt=coff bfd_gas=yes ;;
-      tic4x-*-* | c4x-*-*)              fmt=coff bfd_gas=yes ;;
-      tic54x-*-* | c54x*-*-*)          fmt=coff bfd_gas=yes need_libm=yes;;
-      tic80-*-*)                       fmt=coff ;;
-
-      v850-*-*)                                fmt=elf ;;
-      v850e-*-*)                       fmt=elf ;;
-      v850ea-*-*)                      fmt=elf ;;
-
-      vax-*-netbsdelf*)                        fmt=elf em=nbsd ;;
-      vax-*-netbsd*)                   fmt=aout em=nbsd ;;
-      vax-*-bsd* | vax-*-ultrix*)      fmt=aout ;;
-      vax-*-vms)                       fmt=vms ;;
-
-      w65-*-*)                         fmt=coff ;;
-
-      xstormy16-*-*)                   fmt=elf ;;
-
-      z8k-*-coff | z8k-*-sim)          fmt=coff ;;
-
-      *-*-aout | *-*-scout)            fmt=aout ;;
-      *-*-freebsd*)                    fmt=elf em=freebsd ;;
-      *-*-nindy*)                      fmt=bout ;;
-      *-*-bsd*)                                fmt=aout em=sun3 ;;
-      *-*-generic)                     fmt=generic ;;
-      *-*-xray | *-*-hms)              fmt=coff ;;
-      *-*-sim)                         fmt=coff ;;
-      *-*-elf | *-*-sysv4* | *-*-solaris*) fmt=elf dev=yes ;;
-      *-*-vxworks)                     fmt=aout ;;
-      *-*-netware)                     fmt=elf ;;
+       AC_MSG_ERROR(Unknown vendor for mips-bsd configuration.)
+       ;;
+
+      ppc-*-aix5.*)
+       AC_DEFINE(AIX_WEAK_SUPPORT, 1,
+                 [Define if using AIX 5.2 value for C_WEAKEXT.])
+       ;;
+      ppc-*-linux-*)
+       case "$endian" in
+         big)  ;;
+         *)    AC_MSG_ERROR(GNU/Linux must be configured big endian) ;;
+       esac
+       ;;
+      ppc-*-solaris*)
+       if test ${this_target} = $target; then
+         AC_DEFINE(TARGET_SOLARIS_COMMENT, 1,
+                   [Define if default target is PowerPC Solaris.])
+       fi
+       if test x${endian} = xbig; then
+         AC_MSG_ERROR(Solaris must be configured little endian)
+       fi
+       ;;
+
+      sh*-*-symbianelf*)
+       AC_DEFINE(TARGET_SYMBIAN, 1, [Define if target is Symbian OS.])
+       ;;
     esac
 
     if test ${this_target} = $target ; then
     esac
 
     if test ${this_target} = $target ; then
@@ -500,13 +188,6 @@ changequote([,])dnl
       fi
     fi
 
       fi
     fi
 
-    case ${cpu_type}-${fmt} in
-       alpha*-* | arm-* | i386-* | ia64*-* | mips-* | ns32k-* \
-               | pdp11-* | ppc-* | sparc-* | strongarm-* | xscale-* \
-               | *-elf | *-ecoff | *-som)
-           bfd_gas=yes ;;
-    esac
-
 # Other random stuff.
 
     case ${cpu_type} in
 # Other random stuff.
 
     case ${cpu_type} in
@@ -525,13 +206,16 @@ changequote([,])dnl
          mipsisa64 | mipsisa64el)
            mips_cpu=mips64
            ;;
          mipsisa64 | mipsisa64el)
            mips_cpu=mips64
            ;;
+         mipsisa64r2 | mipsisa64r2el)
+           mips_cpu=mips64r2
+           ;;
          mipstx39 | mipstx39el)
            mips_cpu=r3900
            ;;
          mips64vr | mips64vrel)
            mips_cpu=vr4100
            ;;
          mipstx39 | mipstx39el)
            mips_cpu=r3900
            ;;
          mips64vr | mips64vrel)
            mips_cpu=vr4100
            ;;
-         mipsisa32r2*)
+         mipsisa32r2* | mipsisa64r2*)
 changequote(,)dnl
            mips_cpu=`echo $target_cpu | sed -e 's/[a-z]*..r2//' -e 's/el$//'`
 changequote([,])dnl
 changequote(,)dnl
            mips_cpu=`echo $target_cpu | sed -e 's/[a-z]*..r2//' -e 's/el$//'`
 changequote([,])dnl
@@ -542,7 +226,7 @@ changequote(,)dnl
 changequote([,])dnl
            ;;
          *)
 changequote([,])dnl
            ;;
          *)
-           AC_ERROR($target_cpu isn't a supported MIPS CPU name)
+           AC_MSG_ERROR($target_cpu isn't a supported MIPS CPU name)
            ;;
        esac
        # See whether it's appropriate to set E_MIPS_ABI_O32 for o32
            ;;
        esac
        # See whether it's appropriate to set E_MIPS_ABI_O32 for o32
@@ -566,18 +250,35 @@ changequote([,])dnl
            mips_default_64bit=0
            ;;
        esac
            mips_default_64bit=0
            ;;
        esac
+       # Decide which ABI to target by default.
+       case ${target} in
+         mips64*-linux* | mips-sgi-irix6*)
+           mips_default_abi=N32_ABI
+           ;;
+         mips*-linux*)
+           mips_default_abi=O32_ABI
+           ;;
+         mips64*-openbsd*)
+           mips_default_abi=N64_ABI
+           ;;
+         *)
+           mips_default_abi=NO_ABI
+           ;;
+       esac
        AC_DEFINE_UNQUOTED(MIPS_CPU_STRING_DEFAULT, "$mips_cpu",
                           [Default CPU for MIPS targets. ])
        AC_DEFINE_UNQUOTED(USE_E_MIPS_ABI_O32, $use_e_mips_abi_o32,
                           [Allow use of E_MIPS_ABI_O32 on MIPS targets. ])
        AC_DEFINE_UNQUOTED(MIPS_DEFAULT_64BIT, $mips_default_64bit,
                           [Generate 64-bit code by default on MIPS targets. ])
        AC_DEFINE_UNQUOTED(MIPS_CPU_STRING_DEFAULT, "$mips_cpu",
                           [Default CPU for MIPS targets. ])
        AC_DEFINE_UNQUOTED(USE_E_MIPS_ABI_O32, $use_e_mips_abi_o32,
                           [Allow use of E_MIPS_ABI_O32 on MIPS targets. ])
        AC_DEFINE_UNQUOTED(MIPS_DEFAULT_64BIT, $mips_default_64bit,
                           [Generate 64-bit code by default on MIPS targets. ])
+       AC_DEFINE_UNQUOTED(MIPS_DEFAULT_ABI, $mips_default_abi,
+                          [Choose a default ABI for MIPS targets. ])
        ;;
     esac
 
     # Do we need the opcodes library?
     case ${cpu_type} in
        ;;
     esac
 
     # Do we need the opcodes library?
     case ${cpu_type} in
-      vax | i386 | tic30)
+      vax | tic30)
        ;;
 
       *)
        ;;
 
       *)
@@ -588,19 +289,31 @@ changequote([,])dnl
        *opcodes*) shared_opcodes=true ;;
        *) shared_opcodes=false ;;
        esac
        *opcodes*) shared_opcodes=true ;;
        *) shared_opcodes=false ;;
        esac
-       if test "${shared_opcodes}" = "true"; then
-         # A shared libopcodes must be linked against libbfd.
-         need_bfd=yes
-       fi
        ;;
     esac
 
     # Any other special object files needed ?
     case ${cpu_type} in
        ;;
     esac
 
     # Any other special object files needed ?
     case ${cpu_type} in
-      fr30 | ip2k | m32r | openrisc)
+
+      bfin)
+        echo ${extra_objects} | grep -s "bfin-parse.o"
+        if test $? -ne 0 ; then
+          extra_objects="$extra_objects bfin-parse.o"
+        fi
+
+        echo ${extra_objects} | grep -s "bfin-lex.o"
+        if test $? -ne 0 ; then
+          extra_objects="$extra_objects bfin-lex.o"
+        fi
+        ;;
+
+      fr30 | ip2k | iq2000 | m32r | openrisc)
        using_cgen=yes
        ;;
 
        using_cgen=yes
        ;;
 
+      m32c)
+       using_cgen=yes
+       ;;
       frv)
        using_cgen=yes
        ;;
       frv)
        using_cgen=yes
        ;;
@@ -611,23 +324,31 @@ changequote([,])dnl
        esac
        ;;
 
        esac
        ;;
 
+      mep)
+       using_cgen=yes
+       ;;
+
       mips)
       mips)
-       echo ${extra_objects} | grep -s "itbl-parse.o" 
+       echo ${extra_objects} | grep -s "itbl-parse.o"
        if test $? -ne 0 ; then
          extra_objects="$extra_objects itbl-parse.o"
        fi
 
        if test $? -ne 0 ; then
          extra_objects="$extra_objects itbl-parse.o"
        fi
 
-       echo ${extra_objects} | grep -s "itbl-lex.o" 
+       echo ${extra_objects} | grep -s "itbl-lex.o"
        if test $? -ne 0 ; then
          extra_objects="$extra_objects itbl-lex.o"
        fi
 
        if test $? -ne 0 ; then
          extra_objects="$extra_objects itbl-lex.o"
        fi
 
-       echo ${extra_objects} | grep -s "itbl-ops.o" 
+       echo ${extra_objects} | grep -s "itbl-ops.o"
        if test $? -ne 0 ; then
          extra_objects="$extra_objects itbl-ops.o"
        fi
        ;;
 
        if test $? -ne 0 ; then
          extra_objects="$extra_objects itbl-ops.o"
        fi
        ;;
 
+      mt)
+        using_cgen=yes
+       ;;
+
       i386 | s390 | sparc)
        if test $this_target = $target ; then
          AC_DEFINE_UNQUOTED(DEFAULT_ARCH, "${arch}", [Default architecture.])
       i386 | s390 | sparc)
        if test $this_target = $target ; then
          AC_DEFINE_UNQUOTED(DEFAULT_ARCH, "${arch}", [Default architecture.])
@@ -638,6 +359,17 @@ changequote([,])dnl
        using_cgen=yes
        ;;
 
        using_cgen=yes
        ;;
 
+      xc16x)
+       using_cgen=yes
+       ;;
+
+      xtensa)
+       echo ${extra_objects} | grep -s "xtensa-relax.o"
+       if test $? -ne 0 ; then
+         extra_objects="$extra_objects xtensa-relax.o"
+       fi
+       ;;
+
       *)
        ;;
     esac
       *)
        ;;
     esac
@@ -652,17 +384,8 @@ changequote([,])dnl
 # See if we really can support this configuration with the emulation code.
 
     if test $this_target = $target ; then
 # See if we really can support this configuration with the emulation code.
 
     if test $this_target = $target ; then
-      primary_bfd_gas=$bfd_gas
       obj_format=$fmt
       te_file=$em
       obj_format=$fmt
       te_file=$em
-
-      if test $bfd_gas = no ; then
-       # Can't support other configurations this way.
-       break
-      fi
-    elif test $bfd_gas = no ; then
-      # Can't support this configuration.
-      break
     fi
 
 # From target name and format, produce a list of supported emulations.
     fi
 
 # From target name and format, produce a list of supported emulations.
@@ -718,6 +441,19 @@ if test ${all_targets} = "yes"; then
       ;;
     esac
   ;;
       ;;
     esac
   ;;
+  x86_64)
+    case ${obj_format} in
+    aout)
+      emulations="$emulations i386coff i386elf"
+      ;;
+    coff)
+      emulations="$emulations i386aout i386elf"
+    ;;
+    elf)
+      emulations="$emulations i386aout i386coff"
+      ;;
+    esac
+  ;;
   esac
 fi
 
   esac
 fi
 
@@ -725,8 +461,7 @@ fi
 # IEEE FP.  On those that don't support FP at all, usually IEEE
 # is emulated.
 case ${target_cpu} in
 # IEEE FP.  On those that don't support FP at all, usually IEEE
 # is emulated.
 case ${target_cpu} in
-  vax | tahoe )        atof=${target_cpu} ;;
-  pdp11)       atof=vax ;;
+  vax | pdp11 )        atof=vax ;;
   *)           atof=ieee ;;
 esac
 
   *)           atof=ieee ;;
 esac
 
@@ -756,27 +491,6 @@ if test ! -r ${srcdir}/config/obj-${obj_format}.c; then
   AC_MSG_ERROR(GAS does not have support for object file format ${obj_format})
 fi
 
   AC_MSG_ERROR(GAS does not have support for object file format ${obj_format})
 fi
 
-case ${user_bfd_gas}-${primary_bfd_gas} in
-  yes-yes | no-no)
-    # We didn't override user's choice.
-    ;;
-  no-yes)
-    AC_MSG_WARN(Use of BFD is required for ${target}; overriding config options.)
-    ;;
-  no-preferred)
-    primary_bfd_gas=no
-    ;;
-  *-preferred)
-    primary_bfd_gas=yes
-    ;;
-  yes-*)
-    primary_bfd_gas=yes
-    ;;
-  -*)
-    # User specified nothing.
-    ;;
-esac
-
 # Some COFF configurations want these random other flags set.
 case ${obj_format} in
   coff)
 # Some COFF configurations want these random other flags set.
 case ${obj_format} in
   coff)
@@ -784,13 +498,14 @@ case ${obj_format} in
       i386) AC_DEFINE(I386COFF, 1, [Using i386 COFF?]) ;;
       m68k) AC_DEFINE(M68KCOFF, 1, [Using m68k COFF?]) ;;
       m88k) AC_DEFINE(M88KCOFF, 1, [Using m88k COFF?]) ;;
       i386) AC_DEFINE(I386COFF, 1, [Using i386 COFF?]) ;;
       m68k) AC_DEFINE(M68KCOFF, 1, [Using m68k COFF?]) ;;
       m88k) AC_DEFINE(M88KCOFF, 1, [Using m88k COFF?]) ;;
+      x86_64) AC_DEFINE(I386COFF, 1, [Using i386 COFF?]) ;;
     esac
     ;;
 esac
 
 # Getting this done right is going to be a bitch.  Each configuration specified
     esac
     ;;
 esac
 
 # Getting this done right is going to be a bitch.  Each configuration specified
-# with --enable-targets=... should be checked for environment, format, cpu, and
-# bfd_gas setting.
+# with --enable-targets=... should be checked for environment, format, cpu
+# setting.
 #
 # For each configuration, the necessary object file support code must be linked
 # in.  This might be only one, it might be up to four.  The necessary emulation
 #
 # For each configuration, the necessary object file support code must be linked
 # in.  This might be only one, it might be up to four.  The necessary emulation
@@ -833,10 +548,7 @@ if test `set . $formats ; shift ; echo $#` -gt 1 ; then
       ecoff)   AC_DEFINE(OBJ_MAYBE_ECOFF, 1,   [ECOFF support?])   ;;
       elf)     AC_DEFINE(OBJ_MAYBE_ELF, 1,     [ELF support?])     ;;
       generic) AC_DEFINE(OBJ_MAYBE_GENERIC, 1, [generic support?]) ;;
       ecoff)   AC_DEFINE(OBJ_MAYBE_ECOFF, 1,   [ECOFF support?])   ;;
       elf)     AC_DEFINE(OBJ_MAYBE_ELF, 1,     [ELF support?])     ;;
       generic) AC_DEFINE(OBJ_MAYBE_GENERIC, 1, [generic support?]) ;;
-      hp300)   AC_DEFINE(OBJ_MAYBE_HP300, 1,   [HP300 support?])   ;;
-      ieee)    AC_DEFINE(OBJ_MAYBE_IEEE, 1,    [IEEE support?])    ;;
       som)     AC_DEFINE(OBJ_MAYBE_SOM, 1,     [SOM support?])     ;;
       som)     AC_DEFINE(OBJ_MAYBE_SOM, 1,     [SOM support?])     ;;
-      vms)     AC_DEFINE(OBJ_MAYBE_VMS, 1,     [VMS support?])     ;;
     esac
     extra_objects="$extra_objects obj-$fmt.o"
   done
     esac
     extra_objects="$extra_objects obj-$fmt.o"
   done
@@ -858,12 +570,6 @@ AC_DEFINE_UNQUOTED(EMULATIONS, $EMULATIONS, [Supported emulations.])
 AC_DEFINE_UNQUOTED(DEFAULT_EMULATION, "$DEFAULT_EMULATION",
                   [Default emulation.])
 
 AC_DEFINE_UNQUOTED(DEFAULT_EMULATION, "$DEFAULT_EMULATION",
                   [Default emulation.])
 
-case ${primary_bfd_gas}-${target_cpu_type}-${obj_format} in
-  yes-*-coff)  need_bfd=yes ;;
-  no-*-coff)   need_bfd=yes
-               AC_DEFINE(MANY_SEGMENTS, 1, [old COFF support?]) ;;
-esac
-
 reject_dev_configs=yes
 
 case ${reject_dev_configs}-${dev} in
 reject_dev_configs=yes
 
 case ${reject_dev_configs}-${dev} in
@@ -879,11 +585,6 @@ AC_SUBST(install_tooldir)
 AC_SUBST(atof)
 dnl AC_SUBST(emulation)
 
 AC_SUBST(atof)
 dnl AC_SUBST(emulation)
 
-case "${primary_bfd_gas}" in
-  yes) AC_DEFINE(BFD_ASSEMBLER, 1, [Use BFD interface?])
-       need_bfd=yes ;;
-esac
-
 # do we need the opcodes library?
 case "${need_opcodes}" in
 yes)
 # do we need the opcodes library?
 case "${need_opcodes}" in
 yes)
@@ -891,38 +592,26 @@ yes)
   ;;
 esac
 
   ;;
 esac
 
-case "${need_bfd}" in
-yes)
-  BFDLIB=../bfd/libbfd.la
-  BFDVER_H=../bfd/bfdver.h
-  ALL_OBJ_DEPS="$ALL_OBJ_DEPS"' ../bfd/bfd.h $(INCDIR)/symcat.h'
-  ;;
-esac
-
-AC_SUBST(BFDLIB)
 AC_SUBST(OPCODES_LIB)
 
 AC_SUBST(OPCODES_LIB)
 
-AC_SUBST(BFDVER_H)
-AC_SUBST(ALL_OBJ_DEPS)
-
 AC_DEFINE_UNQUOTED(TARGET_ALIAS,       "${target_alias}", [Target alias.])
 AC_DEFINE_UNQUOTED(TARGET_CANONICAL,   "${target}",       [Canonical target.])
 AC_DEFINE_UNQUOTED(TARGET_CPU,         "${target_cpu}",   [Target CPU.])
 AC_DEFINE_UNQUOTED(TARGET_VENDOR,      "${target_vendor}", [Target vendor.])
 AC_DEFINE_UNQUOTED(TARGET_OS,          "${target_os}",    [Target OS.])
 
 AC_DEFINE_UNQUOTED(TARGET_ALIAS,       "${target_alias}", [Target alias.])
 AC_DEFINE_UNQUOTED(TARGET_CANONICAL,   "${target}",       [Canonical target.])
 AC_DEFINE_UNQUOTED(TARGET_CPU,         "${target_cpu}",   [Target CPU.])
 AC_DEFINE_UNQUOTED(TARGET_VENDOR,      "${target_vendor}", [Target vendor.])
 AC_DEFINE_UNQUOTED(TARGET_OS,          "${target_os}",    [Target OS.])
 
-AC_PROG_CC
-
 AC_PROG_YACC
 AM_PROG_LEX
 
 AC_PROG_YACC
 AM_PROG_LEX
 
-ALL_LINGUAS="fr tr es"
-CY_GNU_GETTEXT
+ALL_LINGUAS="fr tr es rw"
+ZW_GNU_GETTEXT_SISTER_DIR
+AM_PO_SUBDIRS
 
 AM_MAINTAINER_MODE
 
 AM_MAINTAINER_MODE
+AM_CONDITIONAL(GENINSRC_NEVER, false)
 AC_EXEEXT
 
 AC_EXEEXT
 
-AC_CHECK_HEADERS(string.h stdlib.h memory.h strings.h unistd.h stdarg.h varargs.h errno.h sys/types.h)
+AC_CHECK_HEADERS(string.h stdlib.h memory.h strings.h unistd.h stdarg.h varargs.h errno.h sys/types.h limits.h)
 
 # Put this here so that autoconf's "cross-compiling" message doesn't confuse
 # people who are not cross-compiling but are compiling cross-assemblers.
 
 # Put this here so that autoconf's "cross-compiling" message doesn't confuse
 # people who are not cross-compiling but are compiling cross-assemblers.
@@ -936,7 +625,7 @@ fi
 AC_MSG_RESULT($cross_gas)
 
 dnl ansidecl.h will deal with const
 AC_MSG_RESULT($cross_gas)
 
 dnl ansidecl.h will deal with const
-dnl AC_CONST
+dnl AC_C_CONST
 AC_FUNC_ALLOCA
 AC_C_INLINE
 
 AC_FUNC_ALLOCA
 AC_C_INLINE
 
@@ -948,8 +637,8 @@ AC_CHECK_FUNCS(sbrk)
 
 # do we need the math library?
 case "${need_libm}" in
 
 # do we need the math library?
 case "${need_libm}" in
-yes) 
-  AC_CHECK_LIBM
+yes)
+  LT_LIB_M
   AC_SUBST(LIBM)
   ;;
 esac
   AC_SUBST(LIBM)
   ;;
 esac
@@ -980,11 +669,6 @@ gas_test_headers="
 #include <unistd.h>
 #endif
 "
 #include <unistd.h>
 #endif
 "
-GAS_CHECK_DECL_NEEDED(strstr, f, char *(*f)(), $gas_test_headers)
-GAS_CHECK_DECL_NEEDED(malloc, f, char *(*f)(), $gas_test_headers)
-GAS_CHECK_DECL_NEEDED(free, f, void (*f)(), $gas_test_headers)
-GAS_CHECK_DECL_NEEDED(sbrk, f, char *(*f)(), $gas_test_headers)
-GAS_CHECK_DECL_NEEDED(environ, f, char **f, $gas_test_headers)
 
 # Does errno.h declare errno, or do we have to add a separate declaration
 # for it?
 
 # Does errno.h declare errno, or do we have to add a separate declaration
 # for it?
@@ -994,6 +678,32 @@ GAS_CHECK_DECL_NEEDED(errno, f, int f, [
 #endif
 ])
 
 #endif
 ])
 
+AC_MSG_CHECKING(for a known getopt prototype in unistd.h)
+AC_CACHE_VAL(gas_cv_decl_getopt_unistd_h,
+[AC_COMPILE_IFELSE([AC_LANG_PROGRAM([#include <unistd.h>], [extern int getopt (int, char *const*, const char *);])],
+gas_cv_decl_getopt_unistd_h=yes, gas_cv_decl_getopt_unistd_h=no)])
+AC_MSG_RESULT($gas_cv_decl_getopt_unistd_h)
+if test $gas_cv_decl_getopt_unistd_h = yes; then
+  AC_DEFINE([HAVE_DECL_GETOPT], 1,
+           [Is the prototype for getopt in <unistd.h> in the expected format?])
+fi
+
+GAS_CHECK_DECL_NEEDED(environ, f, char **f, $gas_test_headers)
+GAS_CHECK_DECL_NEEDED(ffs, f, int (*f)(int), $gas_test_headers)
+GAS_CHECK_DECL_NEEDED(free, f, void (*f)(), $gas_test_headers)
+GAS_CHECK_DECL_NEEDED(malloc, f, char *(*f)(), $gas_test_headers)
+GAS_CHECK_DECL_NEEDED(sbrk, f, char *(*f)(), $gas_test_headers)
+GAS_CHECK_DECL_NEEDED(strstr, f, char *(*f)(), $gas_test_headers)
+
+AC_CHECK_DECLS([vsnprintf])
+
+BFD_BINARY_FOPEN
+
+dnl Required for html and install-html targets.
+AC_SUBST(datarootdir)
+AC_SUBST(docdir)
+AC_SUBST(htmldir)
+
 dnl This must come last.
 
 dnl We used to make symlinks to files in the source directory, but now
 dnl This must come last.
 
 dnl We used to make symlinks to files in the source directory, but now
@@ -1002,7 +712,8 @@ dnl the build directory which include the right .h file.  Make sure
 dnl the old symlinks don't exist, so that a reconfigure in an existing
 dnl directory behaves reasonably.
 
 dnl the old symlinks don't exist, so that a reconfigure in an existing
 dnl directory behaves reasonably.
 
-AC_OUTPUT(Makefile doc/Makefile ${GDBINIT}:gdbinit.in po/Makefile.in:po/Make-in,
+AC_CONFIG_FILES(Makefile doc/Makefile po/Makefile.in:po/Make-in)
+AC_CONFIG_COMMANDS([default],
 [rm -f targ-cpu.c targ-cpu.h obj-format.h obj-format.c targ-env.h atof-targ.c itbl-cpu.h
  echo '#include "tc-'"${target_cpu_type}"'.h"' > targ-cpu.h
  echo '#include "obj-'"${obj_format}"'.h"' > obj-format.h
 [rm -f targ-cpu.c targ-cpu.h obj-format.h obj-format.c targ-env.h atof-targ.c itbl-cpu.h
  echo '#include "tc-'"${target_cpu_type}"'.h"' > targ-cpu.h
  echo '#include "obj-'"${obj_format}"'.h"' > obj-format.h
@@ -1010,10 +721,10 @@ AC_OUTPUT(Makefile doc/Makefile ${GDBINIT}:gdbinit.in po/Makefile.in:po/Make-in,
  echo '#include "itbl-'"${target_cpu_type}"'.h"' > itbl-cpu.h
  if test "x$cgen_cpu_prefix" != x ; then
    echo '#include "opcodes/'"${cgen_cpu_prefix}"'-desc.h"' > cgen-desc.h
  echo '#include "itbl-'"${target_cpu_type}"'.h"' > itbl-cpu.h
  if test "x$cgen_cpu_prefix" != x ; then
    echo '#include "opcodes/'"${cgen_cpu_prefix}"'-desc.h"' > cgen-desc.h
- fi
-
- sed -e '/POTFILES =/r po/POTFILES' po/Makefile.in > po/Makefile],
+ fi],
 [target_cpu_type=${target_cpu_type}
  cgen_cpu_prefix=${cgen_cpu_prefix}
  obj_format=${obj_format}
  te_file=${te_file}])
 [target_cpu_type=${target_cpu_type}
  cgen_cpu_prefix=${cgen_cpu_prefix}
  obj_format=${obj_format}
  te_file=${te_file}])
+
+AC_OUTPUT
This page took 0.033535 seconds and 4 git commands to generate.