+Thu Oct 07 09:29:11 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * breakpoint.c, breakpoint.h (breakpoint_init_inferior): New function
+ that clears the `inserted' flag for all breakpoints and deletes
+ any breakpoints which should go away between runs of programs.
+ * inflow.c (generic_mourn_inferior), infrun.c (init_wait_for_inferior),
+ remote-es.c (es1800_load), comments in exec.c and corelow.c:
+ Use it instead of mark_breakpoints_out.
+ * breakpoint.c (mark_breakpoints_out): Update comment, tm-rs6000.h
+ uses it in a completely different context.
+ * breakpoint.c (breakpoint_re_set_one): Add bp_call_dummy case.
+
+Thu Oct 07 09:29:11 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * Makefile.in (REGEX, REGEX1): Always use our own version of
+ regex.c to be consistent across hosts.
+ * source.c (_initialize_source): Initialize regex to use grep
+ style syntax as an approximation to POSIX basic regex syntax.
+
+Wed Oct 6 12:43:47 1993 Jeffrey A Law (law@snake.cs.utah.edu)
+ Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * hppa-tdep.c (frame_chain): Rework so that it correctly
+ handles boundaries where code with a frame pointer calls code
+ without a frame pointer.
+ (dig_fp_from_stack): New function.
+
+Wed Oct 6 12:43:47 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * breakpoint.c (delete_breakpoint): Don't insert a disabled breakpoint.
+
+ * README: Add Alpha notes from Schauer.
+
+Tue Oct 5 15:26:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * Makefile.in (install, uninstall): Remove $$n.1 stuff; I don't
+ understand what it is trying to do, but I suspect it's not doing
+ it.
+
+ * config/ns32k/merlin.mh: Add comment about M_INSTALL.
+ * config/m88k/{delta88.mh,delta88v4.mh}: Remove M_INSTALL and
+ M_UNINSTALL; it tries to install a non-existent file gdb.z.
+ * Makefile.in: Remove M_INSTALL stuff; the above were the only uses.
+
+ * stabsread.c (read_range_type): Remove comment which recommends
+ distinguishing float from complex by the name.
+
+Tue Oct 5 12:17:40 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+ Jim Kingdon (kingdon@cygnus.com)
+ Stu Grossman (grossman@cygnus.com)
+
+ Changes to support alpha OSF/1 in native mode.
+ * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt,
+ config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c:
+ New files.
+ * Makefile.in: Add new files and dependencies.
+ * configure.in: Add alpha target.
+ * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o
+ * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle
+ shared libraries now.
+ * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right.
+
+ * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE,
+ provide `unsigned int' default.
+ * breakpoint.c (breakpoint_auto_delete): Delete only if we really
+ stopped for the breakpoint.
+ * stabsread.c, stabsread.h (define_symbol): Change valu parameter
+ to a CORE_ADDR.
+ * stabsread.c (read_range_type): Handle the case where the lower
+ bound overflows and the upper doesn't and the range is legal.
+ * infrun.c (resume): Do not step a breakpoint instruction if
+ CANNOT_STEP_BREAKPOINT is defined.
+
+ * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT.
+ Now that we have the bp_call_dummy breakpoint the call dummy code
+ is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and
+ FIX_CALL_DUMMY can be used to set up everything for the dummy.
+ The breakpoint for the dummy is set at the entry point and thats it.
+ * blockframe.c (inside_entry_file, inside_entry_func): Do not stop
+ backtraces if pc is in the call dummy at the entry point.
+ * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use
+ the expected breakpoint pc when setting up the frame for
+ set_momentary_breakpoint.
+ * symfile.c (entry_point_address): New function for AT_ENTRY_POINT
+ support.
+ * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
+
+Tue Oct 5 11:37:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * configure.in: Recognize hppa*-*-hiux* (currently synonym for hpux).
+ Change other hppa host entries to use -*- not -hp-.
+
+Mon Oct 4 19:16:14 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
+
+ * i386-nlmstub.c: New file; debugging stub for i386 NetWare. Must
+ be compiled with NetWare header files and turned into an NLM with
+ nlmconv.
+
+Mon Oct 4 11:02:11 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * minsyms.c (lookup_minimal_symbol_by_pc): Don't use mst_abs symbols.
+
+ * dbxread.c (process_one_symbol): Make n_opt_found static.
+
+ * Rename i386lynx-tdep.c to i386ly-tdep.c for 14 character file names.
+ * Makefile.in, config/i386/i386lynx.mt: Change accordingly.
+
+ * values.c (record_latest_value): Fetch lazy values and set VALUE_LVAL
+ to not_lval.
+
+Sun Oct 3 15:54:51 1993 Stan Shebs (shebs@rtl.cygnus.com)
+
+ * objfiles.h (objfile): New slot sym_stab_info, use by most
+ stab-reading formats.
+ * gdb-stabs.h (DBX_SYMFILE_INFO): Access sym_stab_info instead of
+ sym_private.
+ * coffread.c (coff_symfile_init): Alloc struct for sym_stab_info.
+ * dbxread.c, elfread.c, paread.c: Change sym_private references to
+ sym_stab_info references.
+
+Sat Oct 2 19:28:35 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * mipsread.c, objfiles.c, utils.c: Use PTR not void *. RISC/OS
+ 4.02 lacks void *.
+ * elfread.c: Use void * not PTR inside PARAMS.
+
+ * config/mips/news-mips.mh: Remove coredep.o; mips-nat.o does it.
+ * config/mips/news-mips.mh: Define NAT_FILE not NM_FILE.
+ * config/mips/nm-news-mips.h: Include mips/nm-mips.h not nm-mips.h.
+
+Sat Oct 2 16:05:22 1993 Stu Grossman (grossman at cygnus.com)
+
+ * Makefile.in, coff-solib.c, coff-solib.h, i386lynx.mt,
+ tm-i386lynx.h: Add support for SVR3 COFF shared libraries.
+
+Sat Oct 2 15:50:41 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * m88k-nat.c (store_inferior_registers): When writing all registers,
+ don't try to write EXIP_REGNUM or ENIP_REGNUM (not needed for this
+ case, and they cause trouble).
+
+ * TODO: Don't suggest doing fast watchpoints by stepping a line
+ at a time. That would be really hairy and still not fast enough.
+ Do suggest debug registers and page table diddling.
+
+Fri Oct 1 14:54:46 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * printcmd.c (do_examine): Make meaning of 'h', 'w', and 'g' not
+ depend on builtin_type_*. Instead, it is always 2, 4, and 8 bytes
+ like the documentation says.
+ * printcmd.c (decode_format) [CC_HAS_LONG_LONG]: Remove 'l' as
+ synonym for 'g'. This was never documented, it shouldn't depend on
+ CC_HAS_LONG_LONG, and I don't see what's wrong with 'g'.
+
+Fri Oct 1 10:06:35 1993 Kung Hsu (kung@cirdan.cygnus.com)
+
+ * symtab.c: fix a bug in testsuite (virtfunc.exp)
+
+Thu Sep 30 11:30:56 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * m88k-nat.c (fill_gregset): Fix typo (R_SFIP -> R_FIP).
+
+ * c-typeprint.c (c_type_print_base, TYPE_FN_FIELD_STUB code):
+ If demangled name lacks a colon, don't dump core.
+
+ * blockframe.c (find_pc_partial_function): If pst->readin is
+ set, don't try to get symbols from pst.
+
+ * inflow.c (generic_mourn_inferior): Call reinit_frame_cache
+ instead of doing it ourself.
+ * blockframe.c (reinit_frame_cache): Use code which was in
+ generic_mourn_inferior so we can use this function even when
+ we have switched targets.
+ * corelow.c (core_detach): Call reinit_frame_cache.
+ * target.c (target_detach): Don't call generic_mourn_inferior
+ (revert yesterday's change, now handled by core_detach).
+ * objfiles.c (free_objfile): Detach any core file if we call
+ SOLIB_CLEAR. #include target.h.
+
+ * fork-child.c (fork_inferior): Don't call target_terminal_init
+ and target_terminal_inferior until we are sure that the inferior
+ has called gdb_setpgid. This fixes PR 2900 (Schauer tracked it
+ down and was able to reliably reproduce it by putting a sleep()
+ before the gdb_setpgid()).
+
+Thu Sep 30 12:00:49 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * c-exp.y, m2-exp.y: Change type of address for msymbol to
+ builtin_type_long.
+ * infptrace.c (fetch_register, store_inferior_register,
+ child_xfer_memory): Use PTRACE_XFER_TYPE for the type of ptrace
+ transfers. Provide an `int' default for PTRACE_XFER_TYPE.
+
+Thu Sep 30 11:30:56 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * defs.h (TARGET_*_BIT): Don't use host information (sizeof) in
+ picking defaults.
+
+ * cp-valprint.c (cp_is_vtbl_ptr_type): Continue to accept old form.
+
+Thu Sep 30 11:25:55 1993 Kung Hsu (kung@cygnus.com)
+
+ * cp-valprint.c (cp_is_vtbl_ptr_type):
+ change vtable field name to __vtbl (pr2695).
+
+ * symtab.c (gdb_mangle_name): fix a bug, to get mangled name right.
+
+Wed Sep 29 18:34:22 1993 Stu Grossman (grossman at cygnus.com)
+
+ * Makefile.in: Add deps for i386lynx-nat.o and i386lynx-tdep.o to
+ keep non-gnu makes happy.
+
+Wed Sep 29 10:52:19 1993 Kung Hsu (kung@cygnus.com)
+
+ * c-valprint.c: to fix virtual table print bug (pr2695).
+
+>>>>>>> 1.1795
+Wed Sep 29 10:52:19 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * target.c (target_detach): Call generic_mourn_inferior.
+ * inflow.c (generic_mourn_inferior): Call flush_cached_frames.
+
+Tue Sep 28 23:08:59 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * dbxread.c, coffread.c, elfread.c: A few changes to comments.
+
+Tue Sep 28 18:39:37 1993 Stan Shebs (shebs@rtl.cygnus.com)
+
+ * configure.in: Rename ...-lynx* to ...-lynxos*.
+ Add m68*-*-lynxos* configuration.
+ * dbxread.c (coffstab_build_psymtabs): New function,
+ interfaces coffread.c to dbxread functions.
+ * coffread.c (coff_symfile_info): Expand to include
+ dbx_symfile_info slots.
+ (coff_symfile_init): Init coff_symfile_info struct.
+ (coff_locate_sections): New functions, finds the stab and stabstr
+ sections.
+ (coff_symfile_read): Call coffstab_build_psymtabs if a stab
+ section is present.
+ (coff_section_offsets): Replace fake version with real offsets.
+
+Tue Sep 28 18:00:50 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * infcmd.c (run_stack_dummy): Set the frame in the bp_call_dummy
+ breakpoint.
+
+Tue Sep 28 17:53:26 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
+
+ * config/nm-sysv4.h: Include solib.h. Define SVR4_SHARED_LIBS.
+ * config/tm-sysv4.h: Don't include solib.h.
+ * config/xm-sysv4.h: Don't define SVR4_SHARED_LIBS.
+ * config/i386/i386v4.mt (TDEPFILES): Move solib.o from here...
+ * config/i386/i386v4.mh (NATDEPFILES): ...to here.
+ * config/i386/nm-i386v4.h: Include nm-sysv4.h.
+ * config/m68k/amix.mt (TDEPFILES): Move solib.o from here...
+ * config/m68k/amix.mh (NATDEPFILES): ...to here.
+
+Tue Sep 28 09:45:38 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * symmisc.c (print_symbol): Use %02x not %2x for LOC_CONST_BYTES.
+
+ Clean up problems with targets and hosts that have 64 bit longs
+ and pointers and 32 bit ints.
+ * breakpoint.c, buildsym.c, c-lang.c, c-valprint.c, ch-lang.c,
+ ch-valprint.c, core.c, cp-valprint.c, dbxread.c, exec.c,
+ expprint.c, gdbtypes.c, infcmd.c, language.c, language.h,
+ m2-lang.c, maint.c, mips-tdep.c, mipsread.c, partial-stab.h,
+ printcmd.c, remote-vx.c, solib.c, source.c, stack.c, symfile.c,
+ symmisc.c, symtab.c, valops.c, valprint.c, xcoffexec.c:
+ Change all printf formats from %x to %lx if outputting an address.
+ Change la_*_format to use long format.
+ local_hex_string, local_hex_string_custom now take an unsigned long
+ argument, change all callers.
+ * coffread.c (read_coff_symtab): Remove superfluous cast for
+ complaint output.
+ * dbxread.c (end_psymtab): Cast MSYMBOL_INFO to long, not int.
+ * findvar.c, value.h (write_register): Change val to LONGEST.
+ * gdbtypes.h (struct type): Change `bitsize' to long as
+ TYPE_FIELD_STATIC_PHYSNAME uses this field as a pointer.
+ * inferior.h (struct inferior_status): Change type of stop_pc to
+ CORE_ADDR.
+ * language.h (local_octal_string, local_octal_string_custom):
+ Remove prototype, the functions are neither defined nor used.
+ * mipsread.c (parse_symbol): Use temporary variable for bitsize as
+ f->bitsize is a long now.
+ * objfiles.c (add_to_objfile_sections, build_objfile_section_table):
+ Use unsigned long casts instead of int for abusing sections_end
+ pointer as integer.
+ * stack.c (parse_frame_specification): Change type of `args' to
+ CORE_ADDR for SETUP_ARBITRARY_FRAME.
+
+ * printcmd.c (make_vasize): Allow redefinition via MAKEVA_SIZE.
+ * mipsread.c (parse_type): Alpha cc now supports the t->continued
+ bit, update algorithm to match the way the compiler uses it.
+
+Tue Sep 28 12:05:11 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * utils.c (fprintfi_filtered): Fix comments.
+
+Mon Sep 27 18:10:08 1993 Stu Grossman (grossman at cygnus.com)
+
+ * coffread.c (read_coff_symtab): Don't call getfilename if there
+ are no auxents.
+
+Mon Sep 27 10:22:37 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * symtab.c (find_pc_line): Fix comments.
+
+ * remote-udi.c (udi_mourn): Don't pop target.
+
+>>>>>>> 1.1783
+Fri Sep 24 17:25:41 1993 Stu Grossman (grossman at cygnus.com)
+
+ * corelow.c: Add multi thread/process support for core files with
+ .reg/XXX pseudo-sections.
+ * i386lynx-nat.c thread.h thread.c: Remove unnecessary core file
+ support.
+
+Thu Sep 23 10:49:37 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * remote-udi.c (download): Skip zero length sections.
+
+ * valops.c (search_struct_method, value_struct_elt):
+ Use (value)-1, not -1, for error.
+
+ * infcmd.c (step_1), infrun.c (wait_for_inferior): Add comments
+ about SHIFT_INST_REGS.
+
+ * exec.c (exec_file_command): Set text_end based on all code readonly
+ sections, not just ".text".
+
+ * defs.h, infcmd.c, config/z8k/tm-z8k.h, config/m88k/tm-m88k.h,
+ config/sh/tm-sh.h, config/h8300/tm-h8300.h, config/h8500/tm-h8500.h,
+ z8k-tdep.c: Remove all references to ADDR_BITS_SET.
+ * config/m88k/tm-m88k.h: Define TARGET_WRITE_PC.
+
+ * config/m88k/tm-m88k.h, m88k-tdep.c: Add call function stuff.
+
+Thu Sep 23 00:13:06 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * config/mips/tm-mips.h (STORE_STRUCT_RETURN): Define as noop as
+ the pushing of the struct return address is already handled in
+ mips_push_arguments.
+ * mips-tdep.c (reinit_frame_cache_sfunc): Fix typo in prototype
+ declaration.
+ * mipsread.c (parse_symbol, parse_type, upgrade_type): Add more
+ sanity checks for corrupt symbol entries to avoid core dumps
+ reported by benson@odi.com. Obviously Ultrix 4.3A cc now has
+ the same problems as the OSF/1 alpha cc.
+ * mipsread.c (parse_lines): Iterate over the range of the compressed
+ line number entries, the old iteration sometimes failed to stop
+ and wrote past the end of the LINETABLE. Add sanity check to avoid
+ the same problem in case the line number info is corrupt.
+ * mipsread.c (parse_procedure): Adjust pdr for alpha __sigtramp.
+ * mipsread.c (parse_external, parse_partial_symbols): Ignore stNil
+ symbols that are produced for statics in .o files and stLocal symbols
+ that are produced for every section in OSF/1 dynamically linked
+ executables.
+ * mipsread.c (psymtab_to_symtab_1): Put out `undefined symbols'
+ warning only under `verbose on' as there are many undefined symbols
+ in a dynamically linked executable.
+
+Wed Sep 22 10:28:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * config/i960/nindy960.mt: Don't define REMOTE_O; REMOTE_O was
+ intended only for VxWorks. Remove dcache.o from TDEPFILES now
+ that we pick it up from the default REMOTE_O.
+
+ * breakpoint.c (bpstat_what): Initialize retval.call_dummy and
+ retval.step_resume.
+
+ * mips-tdep.c (mips_frame_chain): If frame size zero, return zero.
+ * rs6000-tdep.c: Add comment about framelessness.
+
+ * remote-nindy.c: Declare ninMemGet and ninMemPut.
+
+Wed Sep 22 08:02:57 1993 Stu Grossman (grossman at cygnus.com)
+
+ * Makefile.in: Add i386lynx-tdep to the right places.
+ (TARDIRS): Add gdbserver.
+
+ * exec.c (print_section_info): Print entry point.
+ * i386lynx-nat.c (i386lynx_saved_pc_after_call): Move into
+ i386lynx-tdep.c. Add core file support.
+ * i386lynx-tdep.c: New module for Lynx/386 target dependant code.
+ * maint.c: Add `maint info sections' command to print info about all
+ sections that BFD knows about for exec and core files.
+ * sparc-tdep.c (sparc_push_dummy_frame): Update stack pointer
+ before putting frame on the stack. Consolidate writes to reduce
+ traffic for remote debugging.
+ * config/i386/i386lynx.mh (NATDEPFILES): Remove exec.o.
+ * config/i386/i386lynx.mt (TDEPFILES): Add exec.o, i386lynx-tdep.o.
+ * config/i386/nm-i386lynx.h: Add target_pid_to_str().
+ * config/i386/tm-i386lynx.h: Remove target_pid_to_str().
+ * sparclite/Makefile.in: Add deps to keep Sun make happy.
+
+Tue Sep 21 17:48:14 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * breakpoint.h, breakpoint.c (bpstat_stop_status): Add new argument
+ not_a_breakpoint.
+ * infrun.c (wait_for_inferior): Pass it. Also consolidate the
+ test of whether we are stepping into a CURRENTLY_STEPPING macro.
+
+Tue Sep 21 17:22:34 1993 K. Richard Pixley (rich@sendai.cygnus.com)
+
+ * breakpoint.c (bpstat_stop_status),
+ infcmd.c (step_1),
+ infrun.c (wait_for_inferior): collapse SHIFT_INST_REGS ifdef
+ and insert macro.
+
+ * m88k-tdep.c: include ieee-float.h. new global target_is_m88110.
+ new const struct ext_format_m88110 for float format.
+ (pic_prologue_code): add braces.
+ (next_insn): remove unused variable buf.
+ (frame_find_saved_regs): remove unused variables next_addr,
+ saved_regs, regnum.
+ (frame_locals_address): remove unused variables frame, ap.
+ (frame_args_address): remove unused variables frame, ap.
+ (push_parameters): add some breaks and a default case.
+
+ * remote-bug.c: remove redundant includes of value.h, target.h,
+ serial.h.
+ (bug_open): corrected typo, sr_multi_scan -> gr_multi_scan.
+ (bug_fetch_register): special case sfip register for m88110.
+ remove flag bit masking of pc registers. This should be handled
+ by the ADDR_BITS_* macros.
+ (bug_store_register): special case sfip register for m88110.
+ Corrected sprint format for extended registers.
+
+ * config/m88k/tm-m88k.h: white space and comment changes. include
+ ieee-float.h. expanded to cope with m88110 extended registers.
+ (R0_REGNUM, XFP_REGNUM, X0_REGNUM): new macros.
+ (SHIFT_INST_REGS): becomes a real macro.
+
+Tue Sep 21 17:48:14 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * breakpoint.c (breakpoint_1): Support bp_call_dummy.
+
+Tue Sep 21 17:06:19 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
+
+ * elfread.c (record_minimal_symbol_and_info): Guess the section to
+ use from the type.
+ * objfiles.c: Include gdb-stabs.h for SECT_* macros.
+ (objfile_relocate): Relocate textlow and texthigh in psymtabs.
+ Relocate partial symbols. Check that minimal SYMBOL_SECTION is
+ nonnegative before using it.
+ * symtab.h: Adjust section field comment.
+
+ * remote.c (interrupt_query): New function.
+ (remote_interrupt_twice): Call interrupt_query.
+ (putpkt, getpkt): If quit_flag is set, call interrupt_query.
+ (remote_wait): Don't bother with objfile_relocate if the addresses
+ haven't changed.
+ (remote_fetch_registers): If we see a packet that doesn't start
+ with a hex character, fetch a new one.
+