+Sun Aug 1 22:58:18 1993 Stu Grossman (grossman at cygnus.com)
+
+ * Makefile.in (CLIBS): Reorder to make Lynx ld happy.
+ * (HFILES): New file thread.h.
+ * (OBS): New file thread.c.
+ * configure.in: Host config for Lynx/386.
+ * fork-child.c (fork_inferior): Call init_thread_list().
+ * infrun.c (resume): Add pid to invocation of target_resume().
+ * (wait_for_inferior): Pay attention to pid from target_wait().
+ Multi-threading code now uses this to determine what to do.
+ * inftarg.c (child_wait): Conditionalize based on CHILD_WAIT macro.
+ Use target_pid_to_str() macro throughout when printing pid.
+ * inferior.h (child_resume): Add pid to prototype.
+ * hppab-nat.c hppah-nat.c infptrace.c (child_resume): Pass in pid as
+ argument, instead of using inferior_pid.
+ * procfs.c (procfs_resume): Pass in pid as argument. Ignored for
+ now. Use target_pid_to_str() macro throughout for printing process id.
+ * remote-adapt.c (adapt_resume): Pass in pid as argument.
+ * remote-eb.c (eb_resume): Pass in pid as argument.
+ * remote-es.c (es1800_resume): Pass in pid as argument.
+ * remote-hms.c (hms_resume): Pass in pid as argument.
+ * remote-mips.c (mips_resume): Pass in pid as argument.
+ * remote-mm.c (mm_resume): Pass in pid as argument.
+ * remote-monitor.c (monitor_resume): Pass in pid as argument.
+ * remote-nindy.c (nindy_resume): Pass in pid as argument.
+ * remote-sa.sparc.c (remote_resume): Pass in pid as argument.
+ * remote-sim.c (rem_resume): Pass in pid as argument.
+ * remote-sp64sim.c (simif_resume): Pass in pid as argument.
+ * remote-st.c (st2000_resume): Pass in pid as argument.
+ * remote-udi.c (udi_resume): Pass in pid as argument.
+ * remote-vx.c (vx_resume): Pass in pid as argument.
+ * remote-z8k.c (rem_resume): Pass in pid as argument.
+ * remote.c (remote_resume): Pass in pid as argument.
+ * solib.c (solid_create_inferior_hook): Pass inferior_pid to
+ target_resume().
+ * target.c (normal_pid_to_str): New routine to print out process
+ ID normally.
+ * target.h (struct target_ops): Add pid to prototype at
+ to_resume(). (target_resume): Add pid argument.
+ * (target_pid_to_str): Default definition for normal type pids.
+ * thread.c, thread.c: New modules for multi thread/process control.
+
+Sun Aug 1 13:02:42 1993 John Gilmore (gnu@cygnus.com)
+
+ * README: Say that bug-gdb is also the place to send requests
+ for help with GDB.
+
+Sun Aug 1 09:42:13 1993 Fred Fish (fnf@cygnus.com)
+
+ * Makefile.in (make-proto-gdb-1): Use -f opt on rm of Makefile.
+ * h8500-tdep.c: Add parens around a few macro args.
+
+Fri Jul 30 15:43:49 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * TODO: Remove items about unix-to-unix/rapp debugging (now we
+ have gdbserver), moving xm files to subdirectory, ptype yylval,
+ and file-local symbols.
+
+ * gdbtypes.h: Improve comments about C++ methods.
+
+Fri Jul 30 14:16:32 1993 Fred Fish (fnf@deneb.cygnus.com)
+
+ * c-exp.y: Add missing 5th arg for one call to lookup_symbol, cast
+ NULL in all other calls to correct pointer types.
+
+Fri Jul 30 15:43:49 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ From Jeffrey Law:
+ * tm-hppa.h (TARGET_WRITE_PC): Define.
+ * hppa-tdep.c (hppa_fix_call_dummy): If in a syscall,
+ then return the address of the dummy itself rather than
+ the address of $$dyncall.
+ (target_write_pc): New function to store a new PC.
+
+Fri Jul 30 12:51:27 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+ and Jim Kingdon (kingdon@cygnus.com)
+
+ * breakpoint.c (breakpoint_re_set_one): Always reparse breakpoint
+ conditions, they might contain symbol table references.
+
+Fri Jul 30 12:51:27 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * mipsread.c (parse_symbol): Handle opaque struct definitions and
+ type naming for stTypedef symbols.
+
+Fri Jul 30 14:44:21 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * c-exp.y (yylex): Detect C++ nested types.
+
+start-sanitize-v9
+Fri Jul 30 11:07:37 1993 Doug Evans (dje@canuck.cygnus.com)
+
+ * sp64-tdep.c (sparc64_frame_chain, sparc64_frame_saved_pc): Deleted.
+ (dump_ccreg, sparc_print_register_hook): New fns.
+ * remote-sim.h: New file.
+ * remote-sp64sim.h (sim_*): External fns. (simif_*): Internal fns.
+
+ * config/sparc/sp64.mt: New file.
+ * config/sparc/tm-sp64.h (FRAME_CHAIN, FRAME_SAVED_PC): Deleted.
+ (PRINT_REGISTER_HOOK): Call new fn sparc_print_register_hook.
+end-sanitize-v9
+
+Fri Jul 30 10:15:01 1993 Fred Fish (fnf@deneb.cygnus.com)
+
+ * Makefile.in (ALLCONFIG): Add config/i386/ptx.mh
+
+Fri Jul 30 08:58:01 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ From J. Law:
+ * infcmd.c (read_pc): Remove PA specific code.
+ * tm-hppa.h (TARGET_READ_PC): Define.
+ * hppa-tdep.c (target_read_pc): New function.
+
+ * symtab.c (gdb_mangle_name): Deal with it if type lacks a name.
+
+Fri Jul 30 07:36:53 1993 Fred Fish (fnf@deneb.cygnus.com)
+
+ * NEWS: Add note that DEC alpha support is host only, not native.
+ * README: Emphasize that C++ support works best with GNU C++ and
+ stabs debugging format.
+ * delta68-nat.c: Add missing FSF copyright.
+
+Fri Jul 30 08:58:01 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * paread.c (pa_symtab_read): Put file-local symbols in minimal symbols.
+ * hppa-tdep.c (frame_chain_valid): Check that our function has the
+ same address as _start, not that it must be the same symbol.
+
+Fri Jul 30 00:18:40 1993 Fred Fish (fnf@deneb.cygnus.com)
+
+ * Makefile.in (ALLDEPFILES): Add delta68-nat.c
+ * Makefile.in (delta68-nat.o): Add dependency.
+
+Thu Jul 29 12:09:46 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * value.h (COERCE_ENUM): Use COERCE_REF to coerce refs; value_ind
+ was adequate in gdb 3.5 but not now.
+
+ * valops.c (typecmp): An array in t2 matches a pointer in t1.
+
+ * valops.c (typecmp): When comparing type1& to type2, compare
+ type1 and type2 as leniently as if we were comparing type1 to
+ type2.
+
+ * cp-valprint.c (cplus_print_value): Don't dump core if the
+ baseclass doesn't have a name.
+ * values.c (vb_match): New function, which finds the virtual
+ base class pointer even if the types are nameless.
+ (baseclass_{addr,offset}): Use it.
+
+ * hppa-tdep.c: Make "maintenance print unwind" command from old
+ "unwind" command.
+
+ * remote-udi.c: Remove udi_timer, call to siginterrupt, and associated
+ obsolete junk which apparently had been copied from the
+ pre-serial.h remote.c, but which is no longer used.
+
+Thu Jul 29 12:36:20 1993 Fred Fish (fnf@deneb.cygnus.com)
+
+ * Makefile.in (NONSRC): Need 29k-share/README, not
+ 29k-share/udi/README.
+
+Thu Jul 29 12:09:46 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * paread.c (pa_symfile_init): If error reading string table, don't
+ use errno in cases where it hasn't been set.
+
+ * ser-unix.c (gdb_setpgid): Pass our pid, not 0, to setpgid.
+
+ * remote-monitor.c (_initialize_monitor): Comment out use of
+ connect_command, since connect_command itself is commented out.
+
+ * remote-monitor.c (generic_open): Parse arguments the same way
+ as remote.c.
+
+ * hppa-tdep.c (pc_in_linker_stub): Fix unclosed comments.
+
+Wed Jul 28 13:19:34 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * config/mips/xm-mips.h: Define HAVE_TERMIOS.
+
+ * dbxread.c (record_minimal_symbol): Don't put gcc_compiled or
+ __gnu_compiled* symbols into the minimal symbols.
+
+Wed Jul 28 08:26:58 1993 Ian Lance Taylor (ian@cygnus.com)
+
+ * remote-mips.c (_initialize_remote_mips): Added "timeout" and
+ "retransmit-timeout" variables to set mips_receive_wait and
+ mips_retransmit_wait, respectively.
+
+Wed Jul 28 03:58:58 1993 (pes@regent.e-technik.tu-muenchen.de)
+
+ * symmisc.c (dump_msymbols): Handle new mst_file_* types.
+
+Tue Jul 27 12:07:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * remote-udi.c: Remove old comment about download not implemented.
+
+ * serial.h, ser-{unix,go32,tcp}.c: Add flush_input and send_break.
+ * nindy-share/*, remote-nindy.c: Extensive hacking to make it
+ conform to GDB conventions like using memcpy not bcopy, serial.h,
+ etc. This is to make it host on Solaris, AIX, etc.
+ * Makefile.in: Reflect removed nindy-share files.
+ * config/i960/nindy960.mt (TDEPFILES): Remove ttybreak.o.
+
+ * stack.c (print_frame_info): Revise comment about `pathological'
+ case (there was a wrong FIXME about text labels; also asm() can
+ trigger this as well as versions of ar which truncate .o names).
+
+ * buildsym.c (start_subfile): If a .c file includes a .C file, set
+ the language of both of them to C++.
+
+ * config/sparc/xm-sun4os4.h: Define MEM_FNS_DECLARED and include
+ <memory.h>.
+ Include <malloc.h> rather than declaring malloc functions ourself.
+
+ * ser-unix.c (set_tty_state): Don't ignore errors setting process
+ group.
+ * inflow.c (terminal_inferior): If attach_flag set, ignore errors
+ from set_tty_state.
+
+ * fork-child.c (fork_inferior): Only quote exec file if needed.
+
+ * mipsread.c (parse_symbol): Remove 21 Jul 93 change with
+ stTypedef inside an stBlock.
+
+Tue Jul 27 12:36:49 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * breakpoint.c (breakpoint_1): Walk the breakpoint chain to decide if
+ we have breakpoints or watchpoints as we might have to ignore internal
+ breakpoints.
+
+ Fix gdb core dumps after `file newfile' commands.
+ * symtab.h, symfile.c (clear_symtab_users): New routine which
+ unconditionally clears symtab users. clear_symtab_users_once
+ commented out as it was a noop anyway.
+ * objfiles.c (free_objfile): Don't call clear_symtab_users_once.
+ * objfiles.c (free_all_objfiles), symfile.c (new_symfile_objfile),
+ xcoffexec.c (exec_close): Call clear_symtab_users if necessary.
+ * symfile.c (syms_from_objfile): Install cleanups for errors during
+ symbol reading.
+ * coffread.c, dbxread.c, mipsread.c, xcoffread.c (*_symfile_read):
+ Lint cleanup code, call do_cleanups explicitly.
+ * symfile.c (symbol_file_add): Call new_symfile_objfile and
+ reinit_frame_cache _after_ the new symbols are read in.
+