+Fri Feb 25 09:41:11 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
+
+ * remote.c, remote-mon.c, remote-utils.c, remote-utils.h,
+ target.h, remote-es.c, remote-nindy.c: Don't set baud rate if
+ baud_rate is -1. Remove sr_get_baud_rate and sr_set_baud_rate;
+ just use the global variable itself. When printing baud rate,
+ don't print a baud rate if baud_rate is -1.
+
+ * coffread.c (read_coff_symtab): Pass mst_file_* to
+ record_minimal_symbol for C_STAT symbols. Put C_EXT and C_STAT
+ symbols in the minimal symbols regardless of SDB_TYPE.
+
+Thu Feb 24 08:30:33 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
+
+ * breakpoint.h (enum bptype): New type bp_through_sigtramp.
+ (bpstat_what_main_action): New code BPSTAT_WHAT_THROUGH_SIGTRAMP.
+ * breakpoint.c (bpstat_what): Return BPSTAT_WHAT_THROUGH_SIGTRAMP
+ if we hit a bp_through_sigtramp breakpoint. Remove kludge which
+ ignored bs->stop for a bp_step_resume breakpoint.
+ * infrun.c (wait_for_inferior): Make a through_sigtramp_breakpoint
+ which performs one (the check_sigtramp2 one) of the functions
+ which had been handled by the step_resume_breakpoint. For each
+ use of the step_resume_breakpoint, make it still use the
+ step_resume_breakpoint, use the through_sigtramp_breakpoint, or
+ operate on both.
+ Deal with BPSTAT_WHAT_THROUGH_SIGTRAMP return from bpstat_what.
+ When setting the frame address of the step resume breakpoint, set
+ it to the address for frame *before* the call instruction is
+ executed, not after.
+
+ * mips-tdep.c (mips_print_register): Print integers using
+ print_scalar_formatted rather than duplicating all the
+ CC_HAS_LONG_LONG and so on.
+ (mips_push_dummy_frame): Use read_register_gen rather than using
+ read_register and then putting it back in target format with
+ store_unsigned_integer. If registers are more than 4 bytes, give
+ an error rather than have some registers overwrite other
+ registers.
+ #if 0 unused include of opcode/mips.h.
+
+ * symfile.h: Don't declare arguments for coff_getfilename.
+
+ * defs.h: Revert Kung change regarding FORCE_LONG_LONG.
+
+Thu Feb 24 08:06:52 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
+
+ * configure.in (hppa*-*-osf*): New configuration.
+ * config/pa/hppaosf.mt: New target makefile fragment.
+ * config/pa/tm-hppao.h: New target include file.
+
+Thu Feb 24 04:29:19 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * exec.c (print_section_info): Print entry point for exec_bfd only.
+ * ser-unix.c (wait_for): Fix typo in HAVE_TERMIO case.
+ * dwarfread.c: Remove second inclusion of <sys/types.h>, which
+ causes problems if <sys/types.h> has no multiple inclusion protection.
+
+Wed Feb 23 16:28:55 1994 Jeffrey A. Law (law@cygnus.com)
+
+ * tm-hppa.h (CALL_DUMMY): Add two NOP instructions to the end of
+ the call dummy to avoid kernel bugs in HPUX, BSD, and OSF1.
+ (CALL_DUMMY_LENGTH): Changed accordingly.
+
+Wed Feb 23 16:21:25 1994 Stu Grossman (grossman at cygnus.com)
+
+ * sparc-stub.c (trap_low): Make trap handler work for arbitrary
+ numbers of register windows.
+
+ * sparclite/hello.c: Add factorial function for testing.
+ * salib.c: Use macros instead of constants for I/O addresses to
+ make 931 support easier.
+ * sparclite.h: Change constraint for LOC to "rJ" to force use of
+ register in sta/lda instructions.
+
+Wed Feb 23 10:39:18 1994 Jim Kingdon (kingdon@rtl.cygnus.com)
+
+ * dbxread.c (process_one_symbol): Set
+ block_address_function_relative for COFF like we do for ELF and SOM.
+
+Sat Feb 19 03:17:32 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * mdebugread.c (new_psymtab): Pass in section_offsets and set
+ them in the pst.
+ * mdebugread.c (handle_psymbol_enumerators): New function to enter
+ the enumerators of an ecoff enum into the partial symbol table.
+ * mdebugread.c (parse_partial_symbols): Call it.
+ * symfile.c (reread_symbols): Initialize objfile->*_psymbols.next.
+ * symmisc.c (dump_psymtab): Fix typo, clean up output of section
+ offsets. Cast psymtab->read_symtab to PTR before passing it to
+ gdb_print_address.
+ * i386-tdep.c (i386_skip_prologue): Skip over instructions that
+ set up the global offset table pointer in pic compiled code.
+ * config/mips/tm-mips.h (FIX_CALL_DUMMY): For big endian targets,
+ error() on TYPE_CODE_FLT arguments whose size is greater than 8,
+ swap all other TYPE_CODE_FLT arguments as mips_push_arguments
+ ensures that floats are promoted to doubles before they are pushed
+ on the stack.
+
+Fri Feb 18 23:12:59 1994 Stu Grossman (grossman at cygnus.com)
+
+ * sparclite/Makefile.in, sparclite/salib.c, sparclite/sparclite.h:
+ Fixup cache_on and flush_i_cache so that they work for both the
+ 930 and 932 processors. Rewrite most low level funcs (uart
+ access & cache stuff) to use new ASI access macros in sparclite.h.
+ Also make it easy to access second serial port.
+
+Fri Feb 18 22:17:33 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
+
+ * hp300ux-nat.c: Don't incloude <sys/dir.h>, <sys/ioctl.h>, or
+ <sys/stat.h>; not needed.
+
+Fri Feb 18 08:26:29 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * stack.c (print_frame_info): In "pathological" case, don't
+ distrust the line number information.
+
+Fri Feb 18 16:51:14 1994 Kung Hsu (kung@mexican.cygnus.com)
+
+ * mips-tdep.c (mips_print_register): handle 64 bits register.
+ * valprint.c (print_longest): fix a bug in printing 64 bits value.
+
+Fri Feb 18 08:26:29 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * Version 4.12.2.
+
+ * Makefile.in (install): Do the sed for program_transform_name
+ ourselves instead of worrying about INSTALL_XFORM. This enables
+ users to override INSTALL_PROGRAM in the standard way.
+
+ * Makefile.in (c-exp.tab.o, ch-exp.tab.o, m2-exp.tab.o): Don't
+ depend on Makefile.in.
+
+ * defs.h, valprint.c: Make longest_to_int a function not a macro.
+ Only test against INT_MIN if a LONGEST is bigger than an int.
+
+ * README: Change GhostScript to Ghostscript.
+
+Fri Feb 18 07:30:55 1994 Jim Kingdon (kingdon@cygnus.com)
+
+ * config/rs6000/{tm-rs6000lynx.h,nm-rs6000lynx.h,xm-rs6000lynx.h}:
+ Rename to tm-rs6000ly.h, nm-rs6000ly.h, xm-rs6000ly.h for 14
+ character file names.
+ * Makefile.in (ALLPARAM): Add these files.
+
+ * config/mips/littlemips64.mt: Rename to mipsel64.mt for 14
+ character file names.
+ * Makefile.in: Add Kung's new mips64 files.
+
+Thu Feb 17 17:25:47 1994 Kung Hsu (kung@mexican.cygnus.com)
+
+ * configure.in: add mips64-*-elf, mips64-*-ecoff, mips64el-*-elf,
+ mips64el-*-ecoff and mips64-big-*.
+ * defs.h: get rid of FORCE_LONG_LONG.
+ * mips-tdep.c (mips_find_saved_regs): add sd and sdc1 instruction
+ parsing. Change register size to be MIPS_REGSIZE.
+
+Thu Feb 17 09:30:22 1994 David J. Mackenzie (djm@thepub.cygnus.com)
+
+ * corelow.c, exec.c, irix5-nat.c, mipsread.c, objfiles.c,
+ osfsolib.c, rs6000-nat.c, solib.c, symfile.c, utils.c,
+ xcoffexec.c: Use bfd_get_error and bfd_set_error and new error names.
+
+Fri Feb 11 21:47:24 1994 Steve Chamberlain (sac@sphagnum.cygnus.com)
+
+ * remote-hms.c (readchar, hms_open, hms_fetch_register): Made more robust.
+ (remove_commands, add_commands): Add/remove hms-drain when target
+ is connected.
+
+Fri Feb 11 16:11:38 1994 Stu Grossman (grossman at cygnus.com)
+
+ * configure.in: Add Lynx/rs6000 support.
+ * lynx-nat.c: Clean up some Sparc stuff. Clean up ptrace error
+ messages. Add rs6000 support. Don't try to modify unwritable
+ registers.
+ * rs6000-nat.c: Move lots of native dependent stuff (like core
+ file support) from rs6000-tdep.c & xcoffexec.c to here.
+ * rs6000-tdep.c: Move native dependent stuff to nat.c.
+ * xcoffexec.c: Move native dependent stuff to nat.c.
+ * config/rs6000/nm-rs6000.h: Move defs of SOLIB_* macros to here
+ from tm file.
+ * config/rs6000/tm-rs6000.h: Remove defs of SOLIB_* funcs, cuz they're
+ really native.
+ * config/rs6000/tm-rs6000lynx.h, config/rs6000/xm-rs6000lynx.h:
+ New files to support Lynx/rs6000.
+
+Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * README: Remove note about gcc warnings on alpha, these should be
+ gone now.
+ * c-exp.y, ch-exp.y, core.c, corelow.c, eval.c, fork-child.c,
+ m2-exp.y, minsyms.c, nlmread.c, parse.c, putenv.c, regex.c
+ remote-utils.c, stabsread.c: Include <string.h>.
+ * regex.c: Include "defs.h", change re_comp argument to const char *.
+ * infptrace.c (fetch_register, store_inferior_registers): Change
+ regaddr to type CORE_ADDR.
+ * config/alpha/alpha-nw.mt, config/alpha/alpha-osf1.mt (MT_CFLAGS):
+ Remove, no longer necessary now that we use bfd_vma for a CORE_ADDR.
+
+Mon Feb 7 09:21:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * symtab.h: Always define BYTE_BITFIELD to nothing.
+
+Mon Feb 7 08:44:17 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
+
+ * config/m68k/{m68k-em.mt,tm-m68k-em.h}: Remove; no longer used.
+ * configure.in: Remove comment about m68k-em.mt.
+ * Makefile.in: Remove references.
+
+Mon Feb 7 08:22:42 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * defs.h [BFD64]: Use BFD_HOST_64_BIT, not nonexistent
+ BFD_HOST_64_TYPE.
+
+Sun Feb 6 06:55:15 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * target.c (target_preopen): If target_kill doesn't remove the
+ target from the stack, use pop_target to do it.
+
+ * coffread.c (process_coff_symbol, case C_TPDEF): Don't set name
+ of TYPE_CODE_PTR or TYPE_CODE_FUNC types. This parallels similar
+ changes to stabsread.c from summer 1993.
+
+ * remote-udi.c (udi_files_info): If prog_name is NULL, just skip
+ printing the program, rather than passing NULL to printf.
+ (udi_detach): Set udi_session_id to -1 so that udi_close doesn't
+ try to call UDIDisconnect again. Print better message.
+ (udi_kill): Just call UDIDisconnect ourselves, rather than doing
+ it via udi_close.
+ (udi_create_inferior): If udi_session_id is negative, open a new
+ TIP rather than giving an error.
+
+ * config/mips/mipsm3.mh, config/i386/i386m3.mh,
+ config/ns32k/ns32km3.mh: Define NAT_FILE.
+ * config/nm-m3.h: Change guard from _OS_MACH3_H_ and _OS_MACH3_H
+ (it was inconsistent and namespace-wrong) to NM_M3_H.
+ * m3-nat.c (mach_really_wait): Change parameter name to ourstatus.
+ (m3_open): New function.
+ (m3_ops): Use it.
+ * TODO: Update Mach section.
+
+ * Makefile.in: Remove "rapp" stuff; it is superseded by gdbserver.
+
+Sun Feb 6 13:26:21 1994 Per Bothner (bothner@kalessin.cygnus.com)
+
+ * printcmd.c (printf_command): Add missing single-letter
+ backslash-escape sequences, and improve error message.
+
+Sun Feb 6 06:55:15 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * corelow.c (solib_add_stub, core_open): Pass address of from_tty
+ rather than trying to shove an int into a pointer and back out
+ again. This avoids compiler warnings.
+
+ * defs.h (alloca): Declare as void *, not char *, on hpux.
+ Don't prototype it, just declare the return type.
+
+Sun Feb 6 03:25:41 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * config/i386/tm-sun386.h, config/i386/tm-symmetry.h
+ (REGISTER_CONVERT_TO_RAW): Add missing backslash.
+
+Sat Feb 5 08:03:41 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * remote-mips.c (mips_fetch_registers): If regno is FP_REGNUM or
+ ZERO_REGNUM, just read it as zero without talking to the board.
+
+ * config/i386/tm-i386aix.h (REGISTER_CONVERT_TO_RAW): Add missing
+ backslash.
+ * i386-tdep.c (i386_extract_return_value): Pass TYPE_LENGTH (type)
+ to store_floating, not nonexistent variable len.
+
+ * remote-mips.c (mips_insert_breakpoint, mips_remove_breakpoint):
+ New functions.
+ (mips_store_word): Change calling convention to return errors, and
+ to provide old contents if the caller wants it.
+ (mips_xfer_memory): Deal with errors from mips_store_word.
+ * config/mips/tm-idt.h, config/mips/tm-idtl.h: Remove BREAKPOINT
+ define now that remote-mips.c doesn't use BREAKPOINT.
+
+ * remote-mips.c (mips_create_inferior): Call warning if arguments
+ specified, and then execute "set args" command. Call error, not
+ mips_error, if executable file not specified.
+
+ * remote-e7000.c: Replace "snoop" command (e7000_noecho) with
+ remote_debug.
+
+ * config/rs6000/tm-rs6000.h (STORE_STRUCT_RETURN): Don't cast
+ to unsigned int.
+
+Sat Feb 5 05:27:05 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * value.h (print_longest): Rename "value" to "val" in prototype
+ declaration because some compilers don't like arguments whose
+ names are the same as types.
+ * remote.c (remote_xfer_memory): Cast "myaddr" to unsigned char *
+ before passing it to remote_*_bytes.
+
+Fri Feb 4 15:53:18 1994 Steve Chamberlain (sac@cygnus.com)
+
+ * h8500-tdep.c (saved_pc_after_call): The size of the
+ pc is memory model dependent. (segmented_command,
+ unsegmented_command, _initialize_h8500_tdep): New commands to
+ change memory model.
+ * remote-e7000.c (_initialize_remote_e7000): Change name of snoop
+ command.
+ * remote-hms.c (hms_load): Remove breakpoints when loaded.
+ (hms_wait): Use new status structure
+ (hms_open): Push the target here. (hms_before_main_loop): Not
+ here. (supply_val, hms_fetch_register, hms_store_register): Cope
+ with H8/500 names too. (hms_fetch_register): Take out REGISTER_TYPE.
+ * sh-tdep.c (show_regs, initialize_sh_tdep): New command to print
+ all registers in a compact way.
+
+Fri Feb 4 07:41:13 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
+
+ * config/rs6000/tm-rs6000.h: Declare rs6000_struct_return_address
+ as CORE_ADDR to match definition in rs6000-tdep.c.
+
+Fri Feb 4 01:14:20 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * dwarfread.c (process_dies): Skip nested TAG_compile_unit DIEs.
+ * dwarfread.c (add_partial_symbol): Do not enter opaque aggregate
+ definitions into the psymtab.
+
+Thu Feb 3 12:38:58 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * m68k-stub.c: Treat mc68332 like mc68020 most places. Provide
+ a special exceptionSize for the 68332.
+
+ * remote-udi.c (udi_attach): If no arguments, print error.
+
+Thu Feb 3 17:34:05 1994 Fred Fish (fnf@cygnus.com)
+
+ * Makefile.in (VERSION): Bump to 4.12.1
+ * NEWS, README: Update to match 4.12 release.
+
+Thu Feb 3 12:38:58 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * command.c (empty_sfunc): New function.
+ (add_set_cmd): Use it instead of not_just_help_class_command.
+ (not_just_help_class_command): Change calling convention back to
+ what it was before yesterday's change.
+
+ * stabsread.c (read_sun_builtin_type): Skip the semicolon at the end
+ of the type if present.
+
+Wed Feb 2 11:16:45 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * printcmd.c (decode_format): Don't blithely set the size for
+ an address to 'w'. Make it 'g' or 'h', depending on TARGET_PTR_BIT.
+
+ * defs.h: Just typedef CORE_ADDR to bfd_vma. Include bfd.h.
+ If BFD64, make a LONGEST a BFD_HOST_64_BIT.
+ * defs.h (longest_to_int): Don't depend on CC_HAS_LONG_LONG; instead
+ always just check against INT_MIN and INT_MAX (this also fixes things
+ if sizeof (long) > sizeof (int), e.g. Alpha).
+ * config/pa/tm-hppa.h, config/i386/sun386.h, config/rs6000/tm-rs6000.h:
+ Don't define LONGEST or BUILTIN_TYPE_LONGEST.
+ * gdbtypes.h: Remove BUILTIN_TYPE_LONGEST and
+ BUILTIN_TYPE_UNSIGNED_LONGEST.
+ * language.h, c-lang.c, ch-lang.c, m2-lang.c, language.c: Remove
+ longest_int and longest_unsigned_int.
+ * value.h (struct value): Just align to LONGEST, rather than worrying
+ about CC_HAS_LONG_LONG.
+ * valarith.c (value_binop): Figure out type ourself based on
+ sizeof (LONGEST) rather than relying on BUILTIN_TYPE_LONGEST. The
+ point is that we don't depend on CC_HAS_LONG_LONG anymore.
+ * valprint.c (val_print_type_code_int): Just call
+ extract_unsigned_integer directly, rather than going through
+ unpack_long.
+ * printcmd.c (decode_format): Remove code which would sometimes
+ change 'g' size to 'w' for integers. print_scalar_formatted handles
+ printing huge integers well enough, thank you.
+
+ * command.c (add_set_cmd, not_just_help_class_command): Change
+ to make this the sfunc, not cfunc, since that is how we call it.
+ * command.h: Comment difference between sfunc and cfunc.
+ * demangle.c (set_demangling_command): Add third arg since that
+ is how it is called.
+ (_initialize_demangler): Use sfunc, not cfunc, for
+ set_demangling_command, since that is how it is called.
+ Remove show_demangling_command; it has no effect.
+
+ * command.c (shell_escape): Report errors correctly (with error
+ message from strerror).
+
+Wed Feb 2 14:35:41 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
+
+ * xcoffread.c (read_xcoff_symtab): Change CSECT_LEN to use
+ x_scnlen.l rather than x_scnlen to match corresponding change in
+ coff/internal.h.
+
+Wed Feb 2 11:16:45 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * gdbtypes.h, ch-typeprint.c, ch-valprint.c:
+ Change comments regarding TYPE_CODE_BOOL.
+ * language.c (boolean_type): Always return 1 for TYPE_CODE_BOOL,
+ regardless of the language.
+ (value_true): Just call value_logical_not regardless of language.
+ * coffread.c (coff_read_enum_type), stabsread.c (read_enum_type):
+ Remove #if 0'd code which makes some enums TYPE_CODE_BOOL.
+ * language.h: Improve comment for la_builtin_type_vector.
+ * m2-lang.c (_initialize_m2_language): Don't add any fields to
+ builtin_type_m2_bool.
+
+Tue Feb 1 17:13:32 1994 Kevin Buettner (kev@cujo.geg.mot.com)
+
+ * config/m88k/{tm-delta88.h,tm-delta88v4.h}, m88k-tdep.c:
+ Define IN_SIGTRAMP and backtrace correctly through signal handlers.
+
+Tue Feb 1 22:13:25 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * procfs.c (wait_fd): Handle EINTR error return from PIOCWSTOP ioctl
+ by restarting the ioctl.
+
+Tue Feb 1 16:16:25 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * target.h (target_wait): Add comment about calling
+ return_to_top_level.
+
+Tue Feb 1 12:21:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
+
+ * coffread.c (read_one_sym): bfd_coff_swap_aux_in now takes
+ additional arguments.
+ * xcoffread.c (read_xcoff_symtab, read_symbol_lineno): Likewise.
+
+Mon Jan 31 16:10:41 1994 Stu Grossman (grossman at cygnus.com)
+
+ * sparc-stub.c: Remove unnecessary #include of memory.h.
+
+Mon Jan 31 12:12:34 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * mips-tdep.c: Remove code which sets saved_regs from
+ init_extra_frame_info and put it in new function mips_find_saved_regs.
+ (READ_FRAME_REG): Remove macro and replace uses with the expansion.
+ * mips-tdep.c, config/mips/tm-mips.h: When examining ->saved_regs,
+ check if it is NULL and call mips_find_saved_regs if so.
+
+ * remote-mips.c: Use unfiltered, not filtered, output most places.
+
+ * blockframe.c (get_prev_frame_info): Detect and stop an infinite
+ backtrace. Revise comments.
+
+Mon Jan 31 09:40:33 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * mdebugread.c (parse_procedure): Remove _sigtramp kludges for
+ alpha and irix. The _sigtramp case has to be handled properly
+ in the tdep files if we have no ecoff debugging info.
+ * alpha-tdep.c (alpha_frame_saved_pc, alpha_frame_chain),
+ mips-tdep.c (mips_frame_saved_pc): Handle signal handler frames
+ without PC_REGNUM kludge.
+ * mdebugread.c (fixup_sigtramp), mips-tdep.c (read_next_frame_reg):
+ Clean up handling of mips sigtramp frames, improve comments.
+
+Sat Jan 29 23:25:57 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
+
+ * paread.c (read_unwind_info): Fix typo.
+
+ * paread.c (pa_symtab_read): Update the "check_strange_names"
+ filter to match GCC's current output. Filter out section symbols
+ (which the HP linker sometimes puts in the wrong place).
+
+Sat Jan 29 07:44:59 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
+
+ * serial.h (SERIAL_SET_TTY_STATE): Comment return value.
+
+ * Makefile.in (TAGS): Just echo one line, rather than the whole thing.
+
+ * Makefile.in: Remove all references to sparcly-nat.c.
+
+ * Makefile.in (HFILES_NO_SRCDIR): Include dcache.h remote-utils.h
+ remote-sim.h directly, rather than via $(remote_utils_h). This avoids
+ duplicating serial.h and target.h.
+
+ * Makefile.in: Don't set M_INSTALL and M_UNINSTALL. These variables
+ are not used anywhere (a 5 Oct 1993 change removed the uses).
+
+ * config/m68k/monitor.mt (TDEPFILE): Add remote-es.o.
+ * config/m68k/es1800.mt: Add comment.
+ * remote-es.c: Extensive changes to update to current conventions.
+
+ * ser-unix.c (wait_for, hardwire_readchar) [HAVE_TERMIO, HAVE_TERMIOS]:
+ If the timeout is too big to fit in c_cc[VTIME], then do multiple reads
+ to achieve the desired timeout.
+ * serial.h (serial_t): Add field timeout_remaining.
+
+Fri Jan 28 08:45:02 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
+
+ * c-exp.y (yylex): Reenable nested type code.
+
+Fri Jan 28 15:40:33 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * a29k-tdep.c (examine_tag): Add comment regarding argcount.
+
+ * remote-mips.c (mips_ops): Fix docstring.
+
+ * remote-bug.c (bug_ops): Remove spurious newline from docstring.
+
+ * config/m68k/tm-monitor.h: Changes to bring this into accordance
+ with the old tm-m68k-em.h:
+ (GDBINIT_FILENAME, DEFAULT_PROMPT): Remove.
+ (HAVE_68881): Don't undefine; HAVE_68881 is obsolete.
+ (REGISTER_NAMES): Don't muck with it; what tm-m68k.h has is fine.
+ Add FIXME regarding GET_LONGJMP_TARGET.
+
+ * remote-udi.c (udi_close, udi_detach, udi_kill): Add comments.
+ * infptrace.c (kill_inferior): Add comments.
+ * main.c (quit_command): Call target_close after we kill or
+ detach.
+ * remote-udi.c (udi_close): Don't error() if QUITTING.
+
+Fri Jan 28 11:55:52 1994 Rob Savoye (rob@darkstar.cygnus.com)
+
+ * configure.in: Make m68k-coff and aout add monitor support in
+ addition to the standard serial support.
+
+Fri Jan 28 08:45:02 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
+
+ * mdebugread.c (psymtab_to_symtab_1): Don't complain on stLabel with
+ index indexNil.
+
+Fri Jan 28 10:40:34 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * config/pa/tm-hppa.h: Define macro SMASH_TEXT_ADDRESS.
+ * elfread.c (record_minimal_symbol_and_info),
+ dwarfread.c (process_dies), paread.c (pa_symtab_read): Use it.
+
+Thu Jan 27 15:12:23 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * i386-stub.c: Add ".text" right before "mem_fault:".
+
+ * main.c (baud_rate): Add FIXME comment about printing -1 value.
+
+ * remote-utils.c (usage): Fix message to be accurate and conform
+ more closely to normal conventions.
+
+ * remote-utils.c (gr_files_info): Have the exec_bfd test control
+ whether to show information about exec_bfd, and not control whether
+ to show information about device and speed.
+
+ * remote-utils.c (gr_open): If sr_get_device returns NULL, give
+ usage message, don't dump core.
+
+ * remote-bug.c (bug_write_memory): Use alloca, not GCC extension
+ for variable size array.
+ (bug_fetch_register, bug_store_register): Rename "value" to
+ "fpreg_buf" because some compilers don't like variables whose
+ names are the same as types.
+ (bug_store_register): Use a cast when converting char * to
+ unsigned char *.
+
+ * symmisc.c (maintenance_print_symbols): Don't refer to the name
+ of the command in error message (the text was referring to the old
+ name of the command).
+
+ * symmisc.c (dump_symtab): Fix args to fprintf_filtered.
+
+ * c-typeprint.c (c_type_print_base): Have SHOW == 0 mean to print
+ full details on structure elements without names. This partially
+ reverts the changes of 1 Jul 1993 and 31 Aug 1993; I think this aspect
+ of those changes was accidental.
+
+ * stack.c (parse_frame_specification): If SETUP_ARBITRARY_FRAME is
+ defined, make it an error to specify a single argument which is not
+ a frame number.
+
+ * Makefile.in (version.c), main.c (print_gdb_version): Use
+ host_alias and target_alias, not host_canonical and
+ target_canonical, to print configuration.
+
+Wed Jan 26 10:57:21 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * parse.c (write_exp_msymbol): Use new type msymbol_addr_type instead
+ of builtin_type_long. It is necessary to get a type which is
+ TARGET_PTR_BIT bits in size; builtin_type_long might not be big enough.
+
+ Fix many sins which will come up in 32 bit x 64 bit GDB, and
+ various miscellaneous things discovered in the process:
+ * printcmd.c, defs.h (print_address_numeric): New function.
+ * c-valprint.c (c_val_print), ch-valprint.c (chill_val_print)
+ breakpoint.c (describe_other_breakpoints, breakpoint_1, mention),
+ cp-valprint.c (cplus_print_value), infcmd.c (jump_command),
+ printcmd.c, stack.c, symfile.c, symmisc.c, valprint.c:
+ Use it.
+ * utils.c, defs.h (gdb_print_address): New function.
+ * expprint (dump_expression), gdbtypes.h: Use it.
+ * breakpoint.c (describe_other_breakpoints),
+ symmisc.c (dump_symtab, print_symbol):
+ Use filtered not unfiltered I/O.
+ (remove_breakpoints): Remove BREAKPOINT_DEBUG code. Might as well
+ just run gdb under a debugger for this (and it had problems with
+ printing addresses, how to print b->shadow, etc.).
+ * buildsym.c (make_blockvector), core.c (memory_error),
+ exec.c (print_section_info), maint.c (print_section_table),
+ mdebugread.c (parse_procedure), solib.c, source.c, symfile.c,
+ symmisc.c, symtab.c, valops.c, valprint.c, xcoffexec.c:
+ Add comments saying code is broken. Marked with "FIXME-32x64".
+ * dbxread.c (process_one_symbol), partial-stab.h (default),
+ remote-vx.c (vx_run_files_info):
+ Don't cast int being passed to local_hex_string.
+ * symmisc.c (print_symbol): Don't cast long being passed to %lx.
+ * symtab.h (general_symbol_info): Add comment about SYMBOL_VALUE
+ only being a long.
+ * symmisc.c (print_symbol): Print "offset" in message for LOC_ARG
+ and LOC_LOCAL.
+ * printcmd.c (print_address): Remove #if 0 code with ADDR_BITS_REMOVE.
+ * source.c: Include <sys/types.h> regardless of USG.
+
+Tue Jan 25 12:58:26 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * valops.c (value_assign): Set `type' after coercing toval.
+ * c-valprint.c (c_val_print), ch-valprint.c (chill_val_print):
+ Use extract_unsigned_integer to get the address of a reference.
+
+Tue Jan 25 11:31:53 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * stabsread.c (STABS_CONTINUE, error_type), partial-stab.h:
+ AIX can use ? instead of \ for continuation. Deal with it.
+
+ * paread.c (read_unwind_info): Just assign to objfile->obj_private,
+ not OBJ_UNWIND_INFO. Assigning to a cast is a GCC-ism which
+ the HP compiler in ANSI mode doesn't like.
+
+ * main.c: When defaulting HAVE_SIGSETMASK based on USG, just do it
+ based on USG, rather than defining HAVE_SIGSETMASK to an
+ expression containing defined. Having a macro used in #if expand
+ to an expression containing "defined" is undefined according to
+ ANSI, and the HP compiler in ANSI mode doesn't do what we wanted
+ it to.
+
+Mon Jan 24 20:51:29 1994 John Gilmore (gnu@cygnus.com)
+
+ * sparc-nat.c (fetch_inferior_registers, store_inferior_registers):
+ Clean up the changes of 11 Jan, as recommended by Peter Schauer.
+
+Fri Jan 21 19:10:44 1994 Per Bothner (bothner@kalessin.cygnus.com)
+
+ * ch-exp.y (match_string_literal): Allow a zero-length string.
+ * ch-lang.c (chill_printstr): Don't print zero-length string funny.
+
+Sat Jan 22 17:08:48 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * i386aix-nat.c (i386_float_info): Reverse order of registers before
+ passing them to print_387_status.
+ (print_387_status): Don't subtract top from 7 before using it.
+ * i387-tdep.c: Remove comment about AIX wanting "top" subtracted
+ from 7; the above explains it.
+
+Sat Jan 22 20:25:11 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * mips-tdep.c (init_extra_frame_info): Use frame relative stack
+ pointer value when fixing up the frame at the start of a function.
+
+Sat Jan 22 12:29:13 1994 Stu Grossman (grossman at cygnus.com)
+
+ * lynx-nat.c (fetch_core_registers): Load the I & L regs for the
+ Sparc from the stack.
+