+Tue Sep 14 12:21:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
+
+ * remote.c, remote-nindy.c, remote-mon.c, remote-es.c: include
+ remote-utils.h.
+
+ * remote.c (remote_open), remote-nindy.c (nindy_open,
+ nindy_files_info), remote-mon.c (general_open), remote-es.c
+ (es1800_open): use remote-utils facilities for baud rate.
+
+Tue Sep 14 09:12:17 1993 Jim Kingdon (kingdon@cirdan.cygnus.com)
+
+ * paread.c, coffread.c, elfread.c: Include <time.h> before libbfd.h.
+
+ * paread.c: Define BYTES_IN_WORD before including aout/aout64.h.
+
+ * Makefile.in (a29k-tdep.o): Depend on $(defs_h).
+ * config/a29k/tm-a29k.h (SAVED_PC_AFTER_CALL): Use gr122 not lr0
+ if this is a transparent procedure.
+
+Mon Sep 13 16:06:43 1993 Jim Kingdon (kingdon@cirdan.cygnus.com)
+
+ * remote.c: Define remote_debug to 0 and #if 0 baud_rate. Temporary
+ hack so this file compiles again.
+
+ * remote-utils.c (gr_multi_scan): Cast return value from alloca.
+ (gr_multi_scan): #if 0 never-reached return(-1).
+
+ * remote-udi.c (udi_wait): Return inferior_pid not 0.
+
+Mon Sep 13 14:14:35 1993 K. Richard Pixley (rich@sendai.cygnus.com)
+
+ Collect some remote things into remote-utils.
+ * remote-utils.[ch]: new files of functions collected from several
+ different remote targets.
+ * Makefile.in (REMOTE_O): add remote-utils.o.
+ (dcache_h, remote_utils_h): new macros.
+ (HFILES): add $(remote_utils_h).
+ (ALLDEPFILES): add $(remote_utils_h).
+ (dcache.o): new rule.
+ (main.o, remote-bug.o): also depend on $(remote_utils_h).
+ * target.h (remote_debug): extern moved to remote-utils.h.
+ * target.c (find_default_run_target, find_core_target): initialize
+ runable.
+ (remote_debug): moved to remote-utils.c.
+ (_initialize_targets): move declaration of user variable
+ remotedebug to remote-utils.c.
+ * remote-bug.c: include remote-utils.h rather than dcache.h.
+ (bug_close, bug_write, bug_write_cr, desc, bug_dcache, timeout,
+ dev_name, check_open, is_open, readchar, readchar_nofail,
+ pollchar, expect, expect_prompt, get_hex_digit, get_hex_byte,
+ get_hex_word, bug_kill, bug_detach, bug_create_inferior,
+ multi-scan, bug_prepare_to_store, bug_fetch_word,
+ bug_store_word, bug_files_info, bug_mourn, bug_com, bug_device,
+ bug_speed): removed and replaced with facilities from
+ remote-utils.[ch].
+ (bug_read_inferior_memory): renamed to bug_read_memory.
+ (bug_write_inferior_memory): renamed to bug_write_memory.
+ (bug_xfer_inferior_memory): renamed to bug_xfer_memory.
+ (get_word): comment out this unused function for now.
+ (bug_settings, cpu_check_strings): new statics.
+ (bug_open): rewritten to use gr_open.
+ (_initialize_remote_bug): remove declarations of commands bug,
+ device, speed.
+ * main.c: include remote-utils.h.
+ (baud_rate): removed to remote-utils.c.
+ (main): handle baud rate settings using new facilities from
+ remote-utils.
+ * defs.h (baud_rate): removed extern.
+
+ m88110 support via bug-197 monitor.
+ * remote-bug.c (get_reg_name, bug_fetch_register,
+ bug_store_register): added m88110 extended register support.
+ (wait_strings): added bug-197 prompt.
+ (bug_wait): cope with bug-197 prompt.
+ (start_load): cope with either bug-197 or bug-187 prompt.
+
+Mon Sep 13 12:53:09 1993 Jim Kingdon (kingdon@cirdan.cygnus.com)
+
+ * inferior.h, infrun.c, thread.c, infcmd.c: Remove all uses of
+ pc_changed. If it was ever set to a non-zero value, it was before
+ GDB 2.8. It doesn't seem to have any useful function.
+
+ * defs.h: Don't define NORETURN (see comment).
+
+Sat Sep 11 10:46:09 1993 Jim Kingdon (kingdon@poseidon.cygnus.com)
+
+ * m88k-nat.c (fill_gregset): Set r31 and sfip.
+
+Thu Sep 9 10:18:29 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * remote-udi.c (udi_wait, case UDIStdinNeeded): Use a loop calling
+ getchar() (terminated only on '\n') instead of scanf. Send the
+ '\n' which terminates it to the remote system.
+
+ More gcc lint:
+ * exec.c (ignore): Return 0.
+ * stack.c (return_command): Fetch lazy value directly, not via
+ VALUE_CONTENTS, to avoid "value computed is not used".
+ * inflow.c (new_tty): Move osigttou inside #if.
+
+ * remote.c (remote_fetch_registers): If remote reply is short, just
+ note that fact and keep going (reading extra registers as all bits 0).
+ (remote_store_registers): Send number of registers that were found
+ by remote_fetch_registers.
+ * m68k-tdep.c, config/m68k/tm-m68k.h, config/m68k/tm-*.h: Remove
+ HAVE_68881. Define CANNOT_STORE_REGISTER if ptrace() can't write
+ floating registers.
+ * config/m68k/{tm-m68k-nofp.h,m68k-nofp.mt,tm-m68k-fp.h,m68k-fp.mt}:
+ Remove, replaced by {tm-m68k-em.h,m68k-em.mt}.
+ * Makefile.in, configure.in: Change accordingly.
+
+Thu Sep 9 04:59:03 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * mipsread.c (cross_ref): Allow SGI extended symbol types as cross
+ reference targets.
+ * symmisc.c (print_symbol): Use TYPE_TAG_NAME not TYPE_NAME to avoid
+ printing of identities.
+
+Wed Sep 8 19:18:27 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * breakpoint.c (breakpoint_1): Deal with step resume breakpoint.
+
+Wed Sep 8 13:01:10 1993 K. Richard Pixley (rich@cygnus.com)
+
+ Gcc lint.
+ * config/m88k/tm-m88k.h (frame_find_saved_regs): prototype.
+ * config/h8300/tm-h8300.h (NUM_REGS): rewrite to avoid nested comment.
+ * blockframe.c (get_prev_frame_info): initialize address.
+ * breakpoint.c (bpstat_copy): initialize retval.
+ (bpstat_stop_status): initialize value_is_zero.
+ (bpstat_what): initialize bs_class.
+ (breakpoint_1, mention): add do-nothing case for bp_step_resume.
+ (break_command_1): initialize cond_end, addr_end, &
+ canonical_strings_chain.
+ (enable_breakpoint): initialize save_selected_frame.
+ * buildsym.c (end_symtab): initialize symtab & linetablesize.
+ * c-exp.y (parse_number): initialize i.
+ * c-typeprint.c (c_type_print_varspec_prefix): include
+ TYPE_CODE_BITSTRING in switch statements and do nothing.
+ * c-valprint.c (c_val_print): removed unused variable c.
+ * ch-valprint.c (chill_val_print): removed unused variable eltlen.
+ * cp-valprint.c (cp_print_class_method): initialize f & j.
+ * eval.c (evaluate_subexp): initialize pc2, arg1, arg2.
+ * expprint.c (print_subexp): initialize myprec, assoc, & tempstr.
+ * findvar.c (value_from_register): initialize first_addr.
+ * gdbtypes.c (lookup_struct_elt_type): localize use of temporary
+ variable typename.
+ * infcmd.c (run_stack_dummy): return zero rather than simple
+ return.
+ * infrun.c (wait_for_inferior): initialize stop_sp, prologue_pc.
+ remove symtab, appears unused.
+ (restore_selected_frame): return 1.
+ * mipsread.c (psymtab_to_symtab_1): initialize first_off.
+ (fixup_sigtramp): initialize b0.
+ * printcmd.c (do_examine): initialize val_type.
+ (print_frame_args): initialize b.
+ * ser-tcp.c (tcp_restore): comment out declaration. Appears
+ unused.
+ * ser-unix.c (hardwire_restore): comment out declaration. Appears
+ unused.
+ (hardwire_send_break): moved variable status into ifdef
+ HAVE_SGTTY.
+ (wait_for): moved variable numfds into ifdef HAVE_SGTTY.
+ * serial.h: comment change only.
+ * stabsread.c (rs6000_builtin_type): initialize rettype.
+ (read_range_type): initialize nbits.
+ * stack.c (print_frame_info): remove unused variable numargs.
+ (parse_frame_specification): remove unused variables arg1, arg2,
+ arg3.
+ (return_command): initialize return_value.
+ * symfile.c (cashier_psymtab): initialize pprev.
+ * symtab.c (find_pc_psymbol): initialize best.
+ (lookup_symbol): initialize s.
+ (make_symbol_completion_list): initialize quote_pos.
+ * thread.c: include command.h.
+ (thread_info): static declaration removed; unused.
+ (info_threads_command): fix == vs = typo.
+ * typeprint.c (whatis_exp): initialize old_chain.
+ * valprint.c (val_print_string): remove unused variable
+ first_addr_err. Initialize old_chain.
+ (_initialize_valprint): white space comment change.
+ * values.c (show_values): rewrite if statement to avoid empty
+ body.
+ (vb_match): remove unused variable fieldtype_target_type.
+
+Wed Sep 8 10:21:33 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * Makefile.in (mipsread.o): Depend on $(bfd_h).
+
+Tue Sep 7 13:06:44 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * gdbserver/Makefile.in (TAGS): config files are in
+ $(srcdir)/../config, not $(srcdir)/config.
+
+ * config/pa/tm-hppa.h: Declare target_read_pc and target_write_pc.
+ (STORE_RETURN_VALUE): Pass the correct offset of the return
+ register to write_register_bytes.
+ * hppa-tdep.c: Use target_write_pc if PCOQ_TAIL_REGNUM was not saved.
+