+ * symfile.h (MAX_SECTIONS): Increase value to 40.
+ * symfile.c (syms_from_objfile): Add bounds check prior to
+ accessing ``other'' array in a section_addr_info_struct.
+ Remove unused variable section_offsets.
+ (add_symbol_file_command): Remove unused variable text_addr.
+
+2000-03-21 Eli Zaretskii <eliz@is.elta.co.il>
+
+ * breakpoint.c (bpstat_stop_status): Don't stop if a read
+ watchpoint appears to break, but the watched value changed.
+
+2000-03-21 Jim Blandy <jimb@redhat.com>
+
+ * gdbarch.sh: Emit a definition and declaration for gdbarch_free,
+ a companion to gdbarch_alloc, which allows a gdbarch init function
+ to free partially-built gdbarch structures.
+ * gdbarch.c, gdbarch.h: Regenerated.
+
+2000-03-20 Kevin Buettner <kevinb@redhat.com>
+
+ * configure.host, configure.tgt (ia64-*-linux*): New entry.
+
+ * gdbserver/low-linux.c (u_offsets, ia64_register_u_addr,
+ initialize_arch): Define for IA-64.
+ (initialize_arch): Add declaration.
+
+2000-03-20 Eli Zaretskii <eliz@is.elta.co.il>
+
+ * breakpoint.c (insert_breakpoints, remove_breakpoint)
+ (bpstat_stop_status, can_use_hardware_watchpoint): Don't insert,
+ remove, or check status of hardware watchpoints for entire structs
+ and arrays unless the user explicitly asked to watch that struct
+ or array.
+ (insert_breakpoints): Try to insert watchpoints for all the values
+ on the value chain, even if some of them fail to insert.
+
+ * values.c (value_primitive_field): Set the offset in struct value
+ we return when the field is a packed bitfield.
+
+2000-03-20 Michael Snyder <msnyder@cleaver.cygnus.com>
+
+ * remote.c (remote_threads_extra_info): new function.
+ Implement the extra thread info query for "info threads".
+ (remote_threads_info): clean up a bit.
+ (use_threadinfo_query, use_threadextra_query): new variables.
+ Control whether GDB will use the new or old protocol for
+ thread info queries.
+ (remote_open_1): initialize new variables.
+ (remote_async_open_1): ditto.
+ (remote_cisco_open): ditto.
+
+2000-03-20 Kevin Buettner <kevinb@redhat.com>
+
+ * ia64-linux-nat.c, ia64-tdep.c, config/ia64/linux.mh,
+ config/ia64/linux.mt, config/ia64/nm-linux.h, config/ia64/tm-ia64.h,
+ config/ia64/tm-linux.h, config/ia64/xm-linux.h: New files.
+
+2000-03-20 Kevin Buettner <kevinb@redhat.com>
+
+ * utils.c (floatformat_from_doublest): Don't assume that a long
+ will be exactly 32 bits in length. Also... make sure space
+ that we're writing the float to is completely initialized to
+ zeroes, even when the number of bits in the float is not
+ evenly divisible by FLOATFORMAT_CHAR_BIT.
+
+2000-03-20 Jim Blandy <jimb@redhat.com>
+
+ * i386-linux-nat.c: No need to #include "frame.h" any more.
+ (LINUX_SIGTRAMP_INSN0, LINUX_SIGTRAMP_OFFSET0,
+ LINUX_SIGTRAMP_INSN1, LINUX_SIGTRAMP_OFFSET1,
+ LINUX_SIGTRAMP_INSN2, LINUX_SIGTRAMP_OFFSET2, linux_sigtramp_code,
+ LINUX_SIGTRAMP_LEN, i386_linux_sigtramp_start,
+ LINUX_RT_SIGTRAMP_INSN0, LINUX_RT_SIGTRAMP_OFFSET0,
+ LINUX_RT_SIGTRAMP_INSN1, LINUX_RT_SIGTRAMP_OFFSET1,
+ linux_rt_sigtramp_code, LINUX_RT_SIGTRAMP_LEN,
+ i386_linux_rt_sigtramp_start, i386_linux_in_sigtramp,
+ i386_linux_sigcontext_addr, LINUX_SIGCONTEXT_PC_OFFSET,
+ i386_linux_sigtramp_saved_pc, LINUX_SIGCONTEXT_SP_OFFSET,
+ i386_linux_sigtramp_saved_sp): Deleted. Folks rightly pointed
+ out that these are target-dependent, and useful in non-native
+ configurations. Moved to...
+ * i386-linux-tdep.c: ... Here, a new file.
+ * Makefile.in (ALLDEPFILES): Add i386-linux-tdep.c.
+ (i386-linux-tdep.o): New rule.
+ (i386-linux-nat.o): We no longer depend on frame.h.
+ * config/i386/linux.mt (TDEPFILES): Add i386-linux-tdep.o.
+
+2000-03-04 Eli Zaretskii <eliz@is.elta.co.il>
+
+ * event-loop.c (top-level) [NO_FD_SET]: Deprecate this branch.
+ Print an error at compile time if we are to use select, but FD_SET
+ is not available.
+ (SELECT_MASK, NBBY, FD_SETSIZE, NFDBITS, MASK_SIZE): Define only
+ if HAVE_POLL is not defined and NO_FD_SET *is* defined.
+ (create_file_handler) [!HAVE_POLL]: Use FD_SET and FD_CLR.
+ (delete_file_handler) [!HAVE_POLL]: Use FD_CLR and FD_ISSET.
+ (gdb_wait_for_event) [!HAVE_POLL]: Copy fd_set sets directly
+ instead of using memcpy and memset. Use FD_ISSET.
+
+ * config/i386/xm-go32.h (fd_mask): Remove typedef.
+
+Mon Mar 20 19:58:45 2000 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * command.c (_initialize_command): Document requirements for ``!''
+ command.
+
+Mon Mar 20 18:12:46 2000 Andrew Cagney <cagney@b1.cygnus.com>
+
+ From Fri 10 Mar 2000 Robert
+ <robert.melchers@drives.eurotherm.co.uk>:
+ * sh-tdep.c (sh_processor_type_table): Add entry for sh2.
+
+Mon Mar 20 17:33:32 2000 Andrew Cagney <cagney@b1.cygnus.com>
+
+ From Thu Mar 16 16:49:27 EST 2000 John David Anglin
+ <dave@hiauly1.hia.nrc.ca>:
+ * configure.in (CONFIG_INITS): Don't include hpux-thread.c. Stops
+ _initialize_hpux_thread being called twice.
+ * configure: Regenerated.
+
+2000-03-19 Eli Zaretskii <eliz@is.elta.co.il>
+
+ * event-top.c (_initialize_event_loop): If instream is not
+ connected to a terminal device, turn editing off.
+
+2000-03-19 Eli Zaretskii <eliz@is.elta.co.il>
+
+ Support for building GDB with DJGPP, and running the test suite on
+ it:
+ * config/djgpp/djconfig.sh: New file.
+ * config/djgpp/config.sed: New file.
+ * config/djgpp/README: New file.
+ * config/djgpp/fnchange.lst: New file.
+ * config/djgpp/djcheck.sh: New file.
+
+2000-03-19 Eli Zaretskii <eliz@is.elta.co.il>
+
+ * ser-go32.c (ports): Make the initializers complete, to pacify
+ GCC 2.9X.
+
+2000-03-17 Jim Blandy <jimb@redhat.com>
+
+ * i386v-nat.c (i386_insert_nonaligned_watchpoint): Use a
+ two-dimensional array, instead of faking it with explicit index
+ arithmetic.
+
+ * linux-thread.c (linuxthreads_attach, linuxthreads_detach,
+ linuxthreads_create_inferior): Fix typo in variable name: it's
+ linuxthreads_exit_status, not linux_exit_status.
+
+ * gdb_wait.h (WSETSTOP): Pass the appropriate number of arguments
+ to W_STOPCODE.
+
+ * solib.c (solib_add): Delete debugging code.
+
+2000-03-17 Mark Kettenis <kettenis@gnu.org>
+
+ * gdb_wait.h: add definitions of WSETSTOP and WSETEXIT for Linux.
+ * linux-thread.c: Use WSETSTOP instead of W_STOPCODE.
+
+Fri Mar 17 11:06:59 2000 Philippe De Muyter <phdm@macqel.be>
+
+ * language.c (set_lang_str): Do not call `free' for a null pointer.
+ (set_type_str, set_range_str): Ditto.
+
+2000-03-16 Jim Blandy <jimb@redhat.com>
+
+ * i386-linux-nat.c (i386_linux_saved_pc_after_call): Lost in the
+ merge; reinstated.
+
+ * solib.c (current_sos): Be more careful about freeing the new
+ so_list node if an error occurs.
+
+ * i386-tdep.c (LINUX_SIGTRAMP_INSN0, LINUX_SIGTRAMP_OFFSET0,
+ LINUX_SIGTRAMP_INSN1, LINUX_SIGTRAMP_OFFSET1,
+ LINUX_SIGTRAMP_INSN2, LINUX_SIGTRAMP_OFFSET2, linux_sigtramp_code,
+ LINUX_SIGTRAMP_LEN, i386_linux_sigtramp_start,
+ LINUX_RT_SIGTRAMP_INSN0, LINUX_RT_SIGTRAMP_OFFSET0,
+ LINUX_RT_SIGTRAMP_INSN1, LINUX_RT_SIGTRAMP_OFFSET1,
+ linux_rt_sigtramp_code, LINUX_RT_SIGTRAMP_LEN,
+ i386_linux_rt_sigtramp_start, i386_linux_in_sigtramp,
+ i386_linux_sigcontext_addr, LINUX_SIGCONTEXT_PC_OFFSET,
+ i386_linux_sigtramp_saved_pc, LINUX_SIGCONTEXT_SP_OFFSET,
+ i386_linux_sigtramp_saved_sp): Deleted. These all implement
+ Linux-specific signal trampoline detection, and should be moved
+ to...
+ * i386-linux-nat.c: ... here.
+ * config/i386/tm-linux.h (I386_LINUX_SIGTRAMP): No need to define
+ this any more, since we're not enabling OS-specific code in a
+ OS-independent file.
+
+2000-03-16 Eli Zaretskii <eliz@is.elta.co.il>
+
+ * Makefile.in (go32-nat.o): Add prerequisites.
+ (ALLDEPFILES): Add go32-nat.c.
+
+2000-03-15 Michael Snyder <msnyder@cleaver.cygnus.com>
+
+ From "Peter.Schauer" <Peter.Schauer@regent.e-technik.tu-muenchen.de>
+ * symfile.c (reread_symbols): Clear msymbol hash table.
+
+2000-03-15 Jim Blandy <jimb@redhat.com>
+
+ Deal with the inferior unloading shared objects.
+ * solib.c (current_sos): New function, replacing find_solib.
+ (find_solib): Deleted.
+ (free_so): New function.
+ (clear_solib): Call free_so, instead of writing it out.
+ (solib_add): Rewritten: compare the inferior's current list of
+ shared objects with GDB's list, and do the required loads and
+ unloads.
+ (info_sharedlibrary_command, solib_address): Don't use find_solib
+ to walk the list of shared libraries: call solib_add, and then
+ walk the list at so_list_head normally.
+ * objfiles.c (free_objfile): Don't call CLEAR_SOLIB, and don't
+ detach the core target. These tasks are taken care of elsewhere.
+ * target.c (remove_target_sections): New function.
+ * target.h (remove_target_sections): New declaration.
+
+ * solib.c (symbol_add_stub): Check whether we've already created
+ an objfile for this shared object first, before doing all that
+ work to compute section addresses, etc.
+
+ * objfiles.c (unlink_objfile): Report an internal error if objfile
+ doesn't occur in the object_files list.
+
+ * solib.c (special_symbol_handling): Delete argument; it's not
+ used.
+
+ Changes from Peter Schauer <pes@regent.e-technik.tu-muenchen.de>:
+
+ * solib.c (SOLIB_EXTRACT_ADDRESS): New macro to extract addresses
+ from solib structures. Use it throughout solib.c, get rid of all
+ CORE_ADDR casts.
+ (struct so_list): Change type of lmaddr to CORE_ADDR.
+ (first_link_map_member): Change return value type to CORE_ADDR,
+ update callers.
+ (solib_add_common_symbols): Change parameter type to CORE_ADDR,
+ update callers.
+ (open_symbol_file_object, find_solib): Change type of lm variable
+ to CORE_ADDR.
+
+2000-03-15 Eli Zaretskii <eliz@is.elta.co.il>
+
+ * ser-go32.c (dos_noop, dos_raw, dos_noflush_set_tty_state)
+ (dos_print_tty_state, dos_info, _initialize_ser_dos): Convert
+ to ISO C. Use ATTRIBUTE_UNUSED to avoid compiler warnings.
+ (dos_info): Avoid compiler warning when printing a ptrdiff_t.
+
+ * ser-go32.c (dos_get_tty_state): Fail if the (fake) handle was
+ not opened by dos_open, but let the 3 standard handles go through
+ unharmed.
+
+2000-03-14 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
+
+ * eval.c (evaluate_subexp_with_coercion): Add call to
+ check_typedef, to handle typedeffed vars correctly.
+
+Mon Mar 13 21:21:41 2000 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * defs.h (STREQ, STRCMP, STREQN): Document that these macros are
+ somewhat redundant.
+ (QUIT): Note that this can probably be replaced by a function.
+
+2000-03-13 James Ingham <jingham@leda.cygnus.com>
+
+ Add support for a variable object that tries to evaluate itself in
+ the currently selected frame, rather than in a fixed frame.
+
+ * wrapper.c,h (gdb_parse_exp_1): Added a wrapper for
+ gdb_parse_exp_1.
+ * varobj.h: Added USE_CURRENT_FRAME to varobj_type & changed def'n
+ of varobj_create.
+ * varobj.c (varobj_list): Return type indicates whether the
+ variable's type has changed (for current frame variables).
+ (varobj_update): Handle the case where the variable's type has
+ changed.
+ (delete_variable_1): Allow for deletion of variables that have not
+ been installed yet.
+ (new_root_variable): Initialize use_selected_frame variable.
+ (value_of_root): This is where most of the work to handle "current
+ frame" variables was added. Most of the complexity involves
+ handling the case where the type of the variable has changed.
+ (varobj_create): Add a "type" argument, to tell if the
+ variable is one of these "current frame" variables. Also protect
+ call to parse_exp_1 from long jumping.
+
+2000-03-13 Eli Zaretskii <eliz@is.elta.co.il>
+
+ * go32-nat.c (struct env387): Remove declaration.
+ (print_387_status, i386_go32_float_info): Remove redundant
+ functions.
+ (regno_mapping, sig_map, excepn_map): Add braces around inner
+ initializers.
+ (many functions): Use ATTRIBUTE_UNUSED to shut up the compiler;
+ fix code which mixed signed with unsigned.
+ (go32_resume): Use TARGET_SIGNAL_LAST instead of -1.
+ (go32_wait): Initialize INT3_addr.
+ (go32_fetch_registers): Extend all FP registers that are shorter
+ than 4 bytes to 32 bits. Support 32 standard FP registers defined
+ on config/i386/tm-i386.h.
+ (store_register): Support 32 FP registers.
+ (go32_create_inferior): Don't crash if handed a NULL pointer
+ instead of exec file name.
+ (ignore): Remove unused function.
+ (go32_insert_hw_breakpoint): Remove unused variables.
+ (init_go32_ops): Set value of processing_gcc_compilation to 2.
+
+Mon Mar 13 18:54:42 2000 Andrew Cagney <cagney@b1.cygnus.com>
+
+ From 2000-03-10 Daniel Berlin <dan@cgsoftware.com> Fix C++
+ overloading, add support for seeing through references:
projects / deliverable / binutils-gdb.git / blobdiff