+ case "${target}" in
+ *cygwin*) WIN32LIBS="$WIN32LIBS -limagehlp"
+ ;;
+ esac
+fi
+
+
+LIBGUI="../libgui/src/libgui.a"
+GUI_CFLAGS_X="-I${srcdir}/../libgui/src"
+
+
+
+# Check whether --with-cpu or --without-cpu was given.
+if test "${with_cpu+set}" = set; then
+ withval="$with_cpu"
+ case "${target}" in
+ powerpc-* | powerpcle-* )
+ ## It would be nice to keep this table in sync with the one in
+ ## gcc/configure.
+ case "${with_cpu}" in
+ ppc-uisa | rs6000 | 403 | 403GC | 505 | 860 | 601 | 602 | 603 \
+ | 604 | 750 )
+ ## Those are all handled in variants in rs6000-tdep.c, so they're fine.
+ ;;
+ common | power | power2 | rios | rios1 | rios2 | rsc | rsc1 )
+ ## These are all RS6000 variants, as far as GDB is concerned.
+ with_cpu=rs6000
+ ;;
+ 603e | ec603e )
+ with_cpu=603
+ ;;
+ 604e )
+ with_cpu=604
+ ;;
+ * )
+ echo "configure: warning: GDB: unknown --with-cpu value: \`${with_cpu}'; using \`ppc-uisa'." 1>&2
+ with_cpu=ppc-uisa
+ ;;
+ esac
+ ;;
+ * )
+ echo "configure: warning: GDB may ignore the --with-cpu flag for ${target} targets" 1>&2
+ ;;
+esac
+cat >> confdefs.h <<EOF
+#define TARGET_CPU_DEFAULT "${with_cpu}"
+EOF
+
+
+fi
+
+
+
+# Check whether --enable-gdbtk or --disable-gdbtk was given.
+if test "${enable_gdbtk+set}" = set; then
+ enableval="$enable_gdbtk"
+ case "${enableval}" in
+ yes)
+ case "$host" in
+ *go32*)
+ echo "configure: warning: GDB does not support GDBtk on host ${host}. GDBtk will be disabled." 1>&2
+ enable_gdbtk=no ;;
+ *windows*)
+ echo "configure: warning: GDB does not support GDBtk on host ${host}. GDBtk will be disabled." 1>&2
+ enable_gdbtk=no ;;
+ *)
+ enable_gdbtk=yes ;;
+ esac ;;
+ no)
+ enable_gdbtk=no ;;
+ *)
+ { echo "configure: error: bad value ${enableval} given for gdbtk option" 1>&2; exit 1; } ;;
+esac
+else
+
+# Default is on for everything but go32 and Cygwin
+case "$host" in
+ *go32* | *windows*)
+ ;;
+ *)
+ if test -d "${srcdir}/gdbtk" ; then
+ enable_gdbtk=yes
+ fi
+ ;;
+esac
+
+fi
+
+
+WIN32LDAPP=
+
+
+
+configdir="unix"
+
+GDBTKLIBS=
+if test "${enable_gdbtk}" = "yes"; then
+
+
+#
+# Ok, lets find the tcl configuration
+# First, look for one uninstalled.
+# the alternative search directory is invoked by --with-tclconfig
+#
+
+if test x"${no_tcl}" = x ; then
+ # we reset no_tcl in case something fails here
+ no_tcl=true
+ # Check whether --with-tclconfig or --without-tclconfig was given.
+if test "${with_tclconfig+set}" = set; then
+ withval="$with_tclconfig"
+ with_tclconfig=${withval}
+fi
+
+ echo $ac_n "checking for Tcl configuration""... $ac_c" 1>&6
+echo "configure:6043: checking for Tcl configuration" >&5
+ if eval "test \"`echo '$''{'ac_cv_c_tclconfig'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+
+ # First check to see if --with-tclconfig was specified.
+ if test x"${with_tclconfig}" != x ; then
+ if test -f "${with_tclconfig}/tclConfig.sh" ; then
+ ac_cv_c_tclconfig=`(cd ${with_tclconfig}; pwd)`
+ else
+ { echo "configure: error: ${with_tclconfig} directory doesn't contain tclConfig.sh" 1>&2; exit 1; }
+ fi
+ fi
+
+ # then check for a private Tcl installation
+ if test x"${ac_cv_c_tclconfig}" = x ; then
+ for i in \
+ ../tcl \
+ `ls -dr ../tcl[7-9]* 2>/dev/null` \
+ ../../tcl \
+ `ls -dr ../../tcl[7-9]* 2>/dev/null` \
+ ../../../tcl \
+ `ls -dr ../../../tcl[7-9]* 2>/dev/null` ; do
+ if test -f "$i/${configdir}/tclConfig.sh" ; then
+ ac_cv_c_tclconfig=`(cd $i/${configdir}; pwd)`
+ break
+ fi
+ done
+ fi
+ # check in a few common install locations
+ if test x"${ac_cv_c_tclconfig}" = x ; then
+ for i in `ls -d ${prefix}/lib /usr/local/lib 2>/dev/null` ; do
+ if test -f "$i/tclConfig.sh" ; then
+ ac_cv_c_tclconfig=`(cd $i; pwd)`
+ break
+ fi
+ done
+ fi
+ # check in a few other private locations
+ if test x"${ac_cv_c_tclconfig}" = x ; then
+ for i in \
+ ${srcdir}/../tcl \
+ `ls -dr ${srcdir}/../tcl[7-9]* 2>/dev/null` ; do
+ if test -f "$i/${configdir}/tclConfig.sh" ; then
+ ac_cv_c_tclconfig=`(cd $i/${configdir}; pwd)`
+ break
+ fi
+ done
+ fi
+
+fi
+
+ if test x"${ac_cv_c_tclconfig}" = x ; then
+ TCLCONFIG="# no Tcl configs found"
+ echo "configure: warning: Can't find Tcl configuration definitions" 1>&2
+ else
+ no_tcl=
+ TCLCONFIG=${ac_cv_c_tclconfig}/tclConfig.sh
+ echo "$ac_t""found $TCLCONFIG" 1>&6
+ fi
+fi
+
+ if test -z "${no_tcl}"; then
+
+ . $TCLCONFIG
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+#
+# Ok, lets find the tk configuration
+# First, look for one uninstalled.
+# the alternative search directory is invoked by --with-tkconfig
+#
+
+if test x"${no_tk}" = x ; then
+ # we reset no_tk in case something fails here
+ no_tk=true
+ # Check whether --with-tkconfig or --without-tkconfig was given.
+if test "${with_tkconfig+set}" = set; then
+ withval="$with_tkconfig"
+ with_tkconfig=${withval}
+fi
+
+ echo $ac_n "checking for Tk configuration""... $ac_c" 1>&6
+echo "configure:6151: checking for Tk configuration" >&5
+ if eval "test \"`echo '$''{'ac_cv_c_tkconfig'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+
+ # First check to see if --with-tkconfig was specified.
+ if test x"${with_tkconfig}" != x ; then
+ if test -f "${with_tkconfig}/tkConfig.sh" ; then
+ ac_cv_c_tkconfig=`(cd ${with_tkconfig}; pwd)`
+ else
+ { echo "configure: error: ${with_tkconfig} directory doesn't contain tkConfig.sh" 1>&2; exit 1; }
+ fi
+ fi
+
+ # then check for a private Tk library
+ if test x"${ac_cv_c_tkconfig}" = x ; then
+ for i in \
+ ../tk \
+ `ls -dr ../tk[4-9]* 2>/dev/null` \
+ ../../tk \
+ `ls -dr ../../tk[4-9]* 2>/dev/null` \
+ ../../../tk \
+ `ls -dr ../../../tk[4-9]* 2>/dev/null` ; do
+ if test -f "$i/${configdir}/tkConfig.sh" ; then
+ ac_cv_c_tkconfig=`(cd $i/${configdir}; pwd)`
+ break
+ fi
+ done
+ fi
+ # check in a few common install locations
+ if test x"${ac_cv_c_tkconfig}" = x ; then
+ for i in `ls -d ${prefix}/lib /usr/local/lib 2>/dev/null` ; do
+ if test -f "$i/tkConfig.sh" ; then
+ ac_cv_c_tkconfig=`(cd $i; pwd)`
+ break
+ fi
+ done
+ fi
+ # check in a few other private locations
+ if test x"${ac_cv_c_tkconfig}" = x ; then
+ for i in \
+ ${srcdir}/../tk \
+ `ls -dr ${srcdir}/../tk[4-9]* 2>/dev/null` ; do
+ if test -f "$i/${configdir}/tkConfig.sh" ; then
+ ac_cv_c_tkconfig=`(cd $i/${configdir}; pwd)`
+ break
+ fi
+ done
+ fi
+
+fi
+
+ if test x"${ac_cv_c_tkconfig}" = x ; then
+ TKCONFIG="# no Tk configs found"
+ echo "configure: warning: Can't find Tk configuration definitions" 1>&2
+ else
+ no_tk=
+ TKCONFIG=${ac_cv_c_tkconfig}/tkConfig.sh
+ echo "$ac_t""found $TKCONFIG" 1>&6
+ fi
+fi
+
+
+
+ # If $no_tk is nonempty, then we can't do Tk, and there is no
+ # point to doing Tcl.
+ if test -z "${no_tk}"; then
+
+ if test -f "$TKCONFIG" ; then
+ . $TKCONFIG
+ fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+#
+# Ok, lets find the tcl source trees so we can use the headers
+# Warning: transition of version 9 to 10 will break this algorithm
+# because 10 sorts before 9. We also look for just tcl. We have to
+# be careful that we don't match stuff like tclX by accident.
+# the alternative search directory is involked by --with-tclinclude
+#
+
+no_tcl=true
+echo $ac_n "checking for Tcl private headers. dir=${configdir}""... $ac_c" 1>&6
+echo "configure:6247: checking for Tcl private headers. dir=${configdir}" >&5
+# Check whether --with-tclinclude or --without-tclinclude was given.
+if test "${with_tclinclude+set}" = set; then
+ withval="$with_tclinclude"
+ with_tclinclude=${withval}
+fi
+
+if eval "test \"`echo '$''{'ac_cv_c_tclh'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+# first check to see if --with-tclinclude was specified
+if test x"${with_tclinclude}" != x ; then
+ if test -f ${with_tclinclude}/tclInt.h ; then
+ ac_cv_c_tclh=`(cd ${with_tclinclude}; pwd)`
+ elif test -f ${with_tclinclude}/generic/tclInt.h ; then
+ ac_cv_c_tclh=`(cd ${with_tclinclude}/generic; pwd)`
+ else
+ { echo "configure: error: ${with_tclinclude} directory doesn't contain private headers" 1>&2; exit 1; }
+ fi
+fi
+
+# next check if it came with Tcl configuration file
+if test x"${ac_cv_c_tclconfig}" = x ; then
+ if test -f $ac_cv_c_tclconfig/../generic/tclInt.h ; then
+ ac_cv_c_tclh=`(cd $ac_cv_c_tclconfig/..; pwd)`
+ fi
+fi
+
+# next check in private source directory
+#
+# since ls returns lowest version numbers first, reverse its output
+if test x"${ac_cv_c_tclh}" = x ; then
+ for i in \
+ ${srcdir}/../tcl \
+ `ls -dr ${srcdir}/../tcl[7-9]* 2>/dev/null` \
+ ${srcdir}/../../tcl \
+ `ls -dr ${srcdir}/../../tcl[7-9]* 2>/dev/null` \
+ ${srcdir}/../../../tcl \
+ `ls -dr ${srcdir}/../../../tcl[7-9]* 2>/dev/null ` ; do
+ if test -f $i/generic/tclInt.h ; then
+ ac_cv_c_tclh=`(cd $i/generic; pwd)`
+ break
+ fi
+ done
+fi
+# finally check in a few common install locations
+#
+# since ls returns lowest version numbers first, reverse its output
+if test x"${ac_cv_c_tclh}" = x ; then
+ for i in \
+ `ls -dr /usr/local/src/tcl[7-9]* 2>/dev/null` \
+ `ls -dr /usr/local/lib/tcl[7-9]* 2>/dev/null` \
+ /usr/local/src/tcl \
+ /usr/local/lib/tcl \
+ ${prefix}/include ; do
+ if test -f $i/generic/tclInt.h ; then
+ ac_cv_c_tclh=`(cd $i/generic; pwd)`
+ break
+ fi
+ done
+fi
+# see if one is installed
+if test x"${ac_cv_c_tclh}" = x ; then
+ ac_safe=`echo "tclInt.h" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for tclInt.h""... $ac_c" 1>&6
+echo "configure:6313: checking for tclInt.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 6318 "configure"
+#include "confdefs.h"
+#include <tclInt.h>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:6323: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_cv_c_tclh=installed
+else
+ echo "$ac_t""no" 1>&6
+ac_cv_c_tclh=""
+fi
+
+fi
+
+fi
+
+if test x"${ac_cv_c_tclh}" = x ; then
+ TCLHDIR="# no Tcl private headers found"
+ { echo "configure: error: Can't find Tcl private headers" 1>&2; exit 1; }
+fi
+if test x"${ac_cv_c_tclh}" != x ; then
+ no_tcl=""
+ if test x"${ac_cv_c_tclh}" = x"installed" ; then
+ echo "$ac_t""is installed" 1>&6
+ TCLHDIR=""
+ else
+ echo "$ac_t""found in ${ac_cv_c_tclh}" 1>&6
+ # this hack is cause the TCLHDIR won't print if there is a "-I" in it.
+ TCLHDIR="-I${ac_cv_c_tclh}"
+ fi
+fi
+
+
+
+
+#
+# Ok, lets find the tk source trees so we can use the headers
+# If the directory (presumably symlink) named "tk" exists, use that one
+# in preference to any others. Same logic is used when choosing library
+# and again with Tcl. The search order is the best place to look first, then in
+# decreasing significance. The loop breaks if the trigger file is found.
+# Note the gross little conversion here of srcdir by cd'ing to the found
+# directory. This converts the path from a relative to an absolute, so
+# recursive cache variables for the path will work right. We check all
+# the possible paths in one loop rather than many seperate loops to speed
+# things up.
+# the alternative search directory is involked by --with-tkinclude
+#
+no_tk=true
+echo $ac_n "checking for Tk private headers""... $ac_c" 1>&6
+echo "configure:6383: checking for Tk private headers" >&5
+# Check whether --with-tkinclude or --without-tkinclude was given.
+if test "${with_tkinclude+set}" = set; then
+ withval="$with_tkinclude"
+ with_tkinclude=${withval}
+fi
+
+if eval "test \"`echo '$''{'ac_cv_c_tkh'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+# first check to see if --with-tkinclude was specified
+if test x"${with_tkinclude}" != x ; then
+ if test -f ${with_tkinclude}/tk.h ; then
+ ac_cv_c_tkh=`(cd ${with_tkinclude}; pwd)`
+ elif test -f ${with_tkinclude}/generic/tk.h ; then
+ ac_cv_c_tkh=`(cd ${with_tkinclude}/generic; pwd)`
+ else
+ { echo "configure: error: ${with_tkinclude} directory doesn't contain private headers" 1>&2; exit 1; }
+ fi
+fi
+
+# next check if it came with Tk configuration file
+if test x"${ac_cv_c_tkconfig}" = x ; then
+ if test -f $ac_cv_c_tkconfig/../generic/tk.h ; then
+ ac_cv_c_tkh=`(cd $ac_cv_c_tkconfig/..; pwd)`
+ fi
+fi
+
+# next check in private source directory
+#
+# since ls returns lowest version numbers first, reverse its output
+if test x"${ac_cv_c_tkh}" = x ; then
+ for i in \
+ ${srcdir}/../tk \
+ `ls -dr ${srcdir}/../tk[4-9]* 2>/dev/null` \
+ ${srcdir}/../../tk \
+ `ls -dr ${srcdir}/../../tk[4-9]* 2>/dev/null` \
+ ${srcdir}/../../../tk \
+ `ls -dr ${srcdir}/../../../tk[4-9]* 2>/dev/null ` ; do
+ if test -f $i/generic/tk.h ; then
+ ac_cv_c_tkh=`(cd $i/generic; pwd)`
+ break
+ fi
+ done
+fi
+# finally check in a few common install locations
+#
+# since ls returns lowest version numbers first, reverse its output
+if test x"${ac_cv_c_tkh}" = x ; then
+ for i in \
+ `ls -dr /usr/local/src/tk[4-9]* 2>/dev/null` \
+ `ls -dr /usr/local/lib/tk[4-9]* 2>/dev/null` \
+ /usr/local/src/tk \
+ /usr/local/lib/tk \
+ ${prefix}/include ; do
+ if test -f $i/generic/tk.h ; then
+ ac_cv_c_tkh=`(cd $i/generic; pwd)`
+ break
+ fi
+ done
+fi
+# see if one is installed
+if test x"${ac_cv_c_tkh}" = x ; then
+ ac_safe=`echo "tk.h" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for tk.h""... $ac_c" 1>&6
+echo "configure:6449: checking for tk.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 6454 "configure"
+#include "confdefs.h"
+#include <tk.h>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:6459: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_cv_c_tkh=installed
+else
+ echo "$ac_t""no" 1>&6
+ac_cv_c_tkh=""
+fi
+
+fi
+
+fi
+
+if test x"${ac_cv_c_tkh}" != x ; then
+ no_tk=""
+ if test x"${ac_cv_c_tkh}" = x"installed" ; then
+ echo "$ac_t""is installed" 1>&6
+ TKHDIR=""
+ else
+ echo "$ac_t""found in ${ac_cv_c_tkh}" 1>&6
+ # this hack is cause the TKHDIR won't print if there is a "-I" in it.
+ TKHDIR="-I${ac_cv_c_tkh}"
+ fi
+else
+ TKHDIR="# no Tk directory found"
+ echo "configure: warning: Can't find Tk private headers" 1>&2
+ no_tk=true
+fi
+
+
+
+
+echo $ac_n "checking for Itcl private headers. srcdir=${srcdir}""... $ac_c" 1>&6
+echo "configure:6505: checking for Itcl private headers. srcdir=${srcdir}" >&5
+if test x"${ac_cv_c_itclh}" = x ; then
+ for i in ${srcdir}/../itcl ${srcdir}/../../itcl ${srcdir}/../../../itcl ${srcdir}/../itcl/itcl; do
+ if test -f $i/generic/itcl.h ; then
+ ac_cv_c_itclh=`(cd $i/generic; pwd)`
+ break
+ fi
+ done
+fi
+if test x"${ac_cv_c_itclh}" = x ; then
+ ITCLHDIR="# no Itcl private headers found"
+ { echo "configure: error: Can't find Itcl private headers" 1>&2; exit 1; }
+fi
+if test x"${ac_cv_c_itclh}" != x ; then
+ ITCLHDIR="-I${ac_cv_c_itclh}"