-# Fetch the default architecture and default target vector from BFD.
-targ=$target; . $srcdir/../bfd/config.bfd
-
-# We only want the first architecture, so strip off the others if
-# there is more than one.
-targ_archs=`echo $targ_archs | sed 's/ .*//'`
-
-if test "x$targ_archs" != x; then
-
-cat >>confdefs.h <<_ACEOF
-#define DEFAULT_BFD_ARCH $targ_archs
-_ACEOF
-
-fi
-if test "x$targ_defvec" != x; then
-
-cat >>confdefs.h <<_ACEOF
-#define DEFAULT_BFD_VEC $targ_defvec
-_ACEOF
-
-fi
-
-# The CLI cannot be disabled yet, but may be in the future.
-
-# Enable CLI.
-# Check whether --enable-gdbcli was given.
-if test "${enable_gdbcli+set}" = set; then :
- enableval=$enable_gdbcli; case $enableval in
- yes)
- ;;
- no)
- as_fn_error "the command-line interface cannot be disabled yet" "$LINENO" 5 ;;
- *)
- as_fn_error "bad value $enableval for --enable-gdbcli" "$LINENO" 5 ;;
- esac
-else
- enable_gdbcli=yes
-fi
-
-if test x"$enable_gdbcli" = xyes; then
- if test -d $srcdir/cli; then
- CONFIG_OBS="$CONFIG_OBS \$(SUBDIR_CLI_OBS)"
- CONFIG_DEPS="$CONFIG_DEPS \$(SUBDIR_CLI_DEPS)"
- CONFIG_SRCS="$CONFIG_SRCS \$(SUBDIR_CLI_SRCS)"
- ENABLE_CFLAGS="$ENABLE_CFLAGS \$(SUBDIR_CLI_CFLAGS)"
- fi
-fi
-
-# Enable MI.
-# Check whether --enable-gdbmi was given.
-if test "${enable_gdbmi+set}" = set; then :
- enableval=$enable_gdbmi; case $enableval in
- yes | no)
- ;;
- *)
- as_fn_error "bad value $enableval for --enable-gdbmi" "$LINENO" 5 ;;
- esac
-else
- enable_gdbmi=yes
-fi
-
-if test x"$enable_gdbmi" = xyes; then
- if test -d $srcdir/mi; then
- CONFIG_OBS="$CONFIG_OBS \$(SUBDIR_MI_OBS)"
- CONFIG_DEPS="$CONFIG_DEPS \$(SUBDIR_MI_DEPS)"
- CONFIG_SRCS="$CONFIG_SRCS \$(SUBDIR_MI_SRCS)"
- ENABLE_CFLAGS="$ENABLE_CFLAGS \$(SUBDIR_MI_CFLAGS)"
- fi
-fi
-
-# Enable TUI.
-# Check whether --enable-tui was given.
-if test "${enable_tui+set}" = set; then :
- enableval=$enable_tui; case $enableval in
- yes | no | auto)
- ;;
- *)
- as_fn_error "bad value $enableval for --enable-tui" "$LINENO" 5 ;;
- esac
-else
- enable_tui=auto
-fi
-
-
-# Enable gdbtk.
-# Check whether --enable-gdbtk was given.
-if test "${enable_gdbtk+set}" = set; then :
- enableval=$enable_gdbtk; case $enableval in
- yes | no)
- ;;
- *)
- as_fn_error "bad value $enableval for --enable-gdbtk" "$LINENO" 5 ;;
- esac
-else
- if test -d $srcdir/gdbtk; then
- enable_gdbtk=yes
- else
- enable_gdbtk=no
- fi
-fi
-
-# We unconditionally disable gdbtk tests on selected platforms.
-case $host_os in
- go32* | windows*)
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: gdbtk isn't supported on $host; disabling" >&5
-$as_echo "$as_me: WARNING: gdbtk isn't supported on $host; disabling" >&2;}
- enable_gdbtk=no ;;
-esac
-
-# Libunwind support.
-
-# Check whether --with-libunwind was given.
-if test "${with_libunwind+set}" = set; then :
- withval=$with_libunwind; case "${withval}" in
- yes) enable_libunwind=yes ;;
- no) enable_libunwind=no ;;
- *) as_fn_error "bad value ${withval} for GDB with-libunwind option" "$LINENO" 5 ;;
-esac
-else
-
- for ac_header in libunwind.h libunwind-ia64.h
-do :
- as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
-eval as_val=\$$as_ac_Header
- if test "x$as_val" = x""yes; then :
- cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
- if test x"$ac_cv_header_libunwind_h" = xyes -a x"$ac_cv_header_libunwind_ia64_h" = xyes; then
- enable_libunwind=yes;
- fi
-
-fi
-
-
-if test x"$enable_libunwind" = xyes; then
- for ac_header in libunwind.h libunwind-ia64.h
-do :
- as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
-eval as_val=\$$as_ac_Header
- if test "x$as_val" = x""yes; then :
- cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-$as_echo "#define HAVE_LIBUNWIND 1" >>confdefs.h
-
- CONFIG_OBS="$CONFIG_OBS libunwind-frame.o"
- CONFIG_DEPS="$CONFIG_DEPS libunwind-frame.o"
- CONFIG_SRCS="$CONFIG_SRCS libunwind-frame.c"
-fi
-
-opt_curses=no
-
-# Check whether --with-curses was given.
-if test "${with_curses+set}" = set; then :
- withval=$with_curses; opt_curses=$withval
-fi
-
-
-prefer_curses=no
-if test "$opt_curses" = "yes"; then
- prefer_curses=yes
-fi
-
-# Profiling support.
-# Check whether --enable-profiling was given.
-if test "${enable_profiling+set}" = set; then :
- enableval=$enable_profiling; case $enableval in
- yes | no)
- ;;
- *)
- as_fn_error "bad value $enableval for --enable-profile" "$LINENO" 5 ;;
- esac
-else
- enable_profiling=no
-fi
-
-
-for ac_func in monstartup _mcleanup
-do :
- as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
-ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
-eval as_val=\$$as_ac_var
- if test "x$as_val" = x""yes; then :
- cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-done
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for _etext" >&5
-$as_echo_n "checking for _etext... " >&6; }
-if test "${ac_cv_var__etext+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <stdlib.h>
-extern char _etext;
-
-int
-main ()
-{
-free (&_etext);
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_var__etext=yes
-else
- ac_cv_var__etext=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_var__etext" >&5
-$as_echo "$ac_cv_var__etext" >&6; }
-if test $ac_cv_var__etext = yes; then
-
-$as_echo "#define HAVE__ETEXT 1" >>confdefs.h
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for etext" >&5
-$as_echo_n "checking for etext... " >&6; }
-if test "${ac_cv_var_etext+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <stdlib.h>
-extern char etext;
-
-int
-main ()
-{
-free (&etext);
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_var_etext=yes
-else
- ac_cv_var_etext=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_var_etext" >&5
-$as_echo "$ac_cv_var_etext" >&6; }
-if test $ac_cv_var_etext = yes; then
-
-$as_echo "#define HAVE_ETEXT 1" >>confdefs.h
-
-fi
-if test "$enable_profiling" = yes ; then
- if test $ac_cv_func_monstartup = no || test $ac_cv_func__mcleanup = no; then
- as_fn_error "--enable-profiling requires monstartup and _mcleanup" "$LINENO" 5
- fi
- PROFILE_CFLAGS=-pg
- OLD_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS $PROFILE_CFLAGS"
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC supports -pg" >&5
-$as_echo_n "checking whether $CC supports -pg... " >&6; }
-if test "${ac_cv_cc_supports_pg+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-int x;
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_cc_supports_pg=yes
-else
- ac_cv_cc_supports_pg=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cc_supports_pg" >&5
-$as_echo "$ac_cv_cc_supports_pg" >&6; }
-
- if test $ac_cv_cc_supports_pg = no; then
- as_fn_error "--enable-profiling requires a compiler which supports -pg" "$LINENO" 5
- fi
-
- CFLAGS="$OLD_CFLAGS"
-fi
-
-
-
-# Check whether --with-pkgversion was given.
-if test "${with_pkgversion+set}" = set; then :
- withval=$with_pkgversion; case "$withval" in
- yes) as_fn_error "package version not specified" "$LINENO" 5 ;;
- no) PKGVERSION= ;;
- *) PKGVERSION="($withval) " ;;
- esac
-else
- PKGVERSION="(GDB) "
-
-fi
-
-
-
-
-
-# Check whether --with-bugurl was given.
-if test "${with_bugurl+set}" = set; then :
- withval=$with_bugurl; case "$withval" in
- yes) as_fn_error "bug URL not specified" "$LINENO" 5 ;;
- no) BUGURL=
- ;;
- *) BUGURL="$withval"
- ;;
- esac
-else
- BUGURL="http://www.gnu.org/software/gdb/bugs/"
-
-fi
-
- case ${BUGURL} in
- "")
- REPORT_BUGS_TO=
- REPORT_BUGS_TEXI=
- ;;
- *)
- REPORT_BUGS_TO="<$BUGURL>"
- REPORT_BUGS_TEXI=@uref{`echo "$BUGURL" | sed 's/@/@@/g'`}
- ;;
- esac;
-
-
-
-
-cat >>confdefs.h <<_ACEOF
-#define PKGVERSION "$PKGVERSION"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define REPORT_BUGS_TO "$REPORT_BUGS_TO"
-_ACEOF
-
-
-# --------------------- #
-# Checks for programs. #
-# --------------------- #
-
-for ac_prog in gawk mawk nawk awk
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_AWK+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$AWK"; then
- ac_cv_prog_AWK="$AWK" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_AWK="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-AWK=$ac_cv_prog_AWK
-if test -n "$AWK"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
-$as_echo "$AWK" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$AWK" && break
-done
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
-$as_echo_n "checking whether ln -s works... " >&6; }
-LN_S=$as_ln_s
-if test "$LN_S" = "ln -s"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
-$as_echo "no, using $LN_S" >&6; }
-fi
-
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_RANLIB+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$RANLIB"; then
- ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-RANLIB=$ac_cv_prog_RANLIB
-if test -n "$RANLIB"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
-$as_echo "$RANLIB" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_RANLIB"; then
- ac_ct_RANLIB=$RANLIB
- # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_RANLIB"; then
- ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_RANLIB="ranlib"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
-if test -n "$ac_ct_RANLIB"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
-$as_echo "$ac_ct_RANLIB" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_ct_RANLIB" = x; then
- RANLIB=":"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- RANLIB=$ac_ct_RANLIB
- fi
-else
- RANLIB="$ac_cv_prog_RANLIB"
-fi
-
-for ac_prog in 'bison -y' byacc
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_YACC+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$YACC"; then
- ac_cv_prog_YACC="$YACC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_YACC="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-YACC=$ac_cv_prog_YACC
-if test -n "$YACC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $YACC" >&5
-$as_echo "$YACC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$YACC" && break
-done
-test -n "$YACC" || YACC="yacc"
-
-
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_AR+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$AR"; then
- ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_AR="${ac_tool_prefix}ar"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-AR=$ac_cv_prog_AR
-if test -n "$AR"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
-$as_echo "$AR" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_AR"; then
- ac_ct_AR=$AR
- # Extract the first word of "ar", so it can be a program name with args.
-set dummy ar; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_AR+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_AR"; then
- ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_AR="ar"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_AR=$ac_cv_prog_ac_ct_AR
-if test -n "$ac_ct_AR"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
-$as_echo "$ac_ct_AR" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_ct_AR" = x; then
- AR=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- AR=$ac_ct_AR
- fi
-else
- AR="$ac_cv_prog_AR"
-fi
-
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dlltool; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_DLLTOOL+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$DLLTOOL"; then
- ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-DLLTOOL=$ac_cv_prog_DLLTOOL
-if test -n "$DLLTOOL"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
-$as_echo "$DLLTOOL" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_DLLTOOL"; then
- ac_ct_DLLTOOL=$DLLTOOL
- # Extract the first word of "dlltool", so it can be a program name with args.
-set dummy dlltool; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_DLLTOOL+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_DLLTOOL"; then
- ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_DLLTOOL="dlltool"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
-if test -n "$ac_ct_DLLTOOL"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
-$as_echo "$ac_ct_DLLTOOL" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_ct_DLLTOOL" = x; then
- DLLTOOL=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- DLLTOOL=$ac_ct_DLLTOOL
- fi
-else
- DLLTOOL="$ac_cv_prog_DLLTOOL"
-fi
-
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}windres", so it can be a program name with args.
-set dummy ${ac_tool_prefix}windres; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_WINDRES+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$WINDRES"; then
- ac_cv_prog_WINDRES="$WINDRES" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_WINDRES="${ac_tool_prefix}windres"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-WINDRES=$ac_cv_prog_WINDRES
-if test -n "$WINDRES"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $WINDRES" >&5
-$as_echo "$WINDRES" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_WINDRES"; then
- ac_ct_WINDRES=$WINDRES
- # Extract the first word of "windres", so it can be a program name with args.
-set dummy windres; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_WINDRES+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_WINDRES"; then
- ac_cv_prog_ac_ct_WINDRES="$ac_ct_WINDRES" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_WINDRES="windres"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_WINDRES=$ac_cv_prog_ac_ct_WINDRES
-if test -n "$ac_ct_WINDRES"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_WINDRES" >&5
-$as_echo "$ac_ct_WINDRES" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_ct_WINDRES" = x; then
- WINDRES=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- WINDRES=$ac_ct_WINDRES
- fi
-else
- WINDRES="$ac_cv_prog_WINDRES"
-fi
-
-
-# Needed for GNU/Hurd.
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}mig", so it can be a program name with args.
-set dummy ${ac_tool_prefix}mig; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_MIG+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$MIG"; then
- ac_cv_prog_MIG="$MIG" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_MIG="${ac_tool_prefix}mig"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-MIG=$ac_cv_prog_MIG
-if test -n "$MIG"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MIG" >&5
-$as_echo "$MIG" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_MIG"; then
- ac_ct_MIG=$MIG
- # Extract the first word of "mig", so it can be a program name with args.
-set dummy mig; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_MIG+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_MIG"; then
- ac_cv_prog_ac_ct_MIG="$ac_ct_MIG" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_MIG="mig"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_MIG=$ac_cv_prog_ac_ct_MIG
-if test -n "$ac_ct_MIG"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MIG" >&5
-$as_echo "$ac_ct_MIG" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_ct_MIG" = x; then
- MIG=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- MIG=$ac_ct_MIG
- fi
-else
- MIG="$ac_cv_prog_MIG"
-fi
-
-
-# ---------------------- #
-# Checks for libraries. #
-# ---------------------- #
-
-# We might need to link with -lm; most simulators need it.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for main in -lm" >&5
-$as_echo_n "checking for main in -lm... " >&6; }
-if test "${ac_cv_lib_m_main+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lm $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-
-int
-main ()
-{
-return main ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_lib_m_main=yes
-else
- ac_cv_lib_m_main=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_main" >&5
-$as_echo "$ac_cv_lib_m_main" >&6; }
-if test "x$ac_cv_lib_m_main" = x""yes; then :
- cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBM 1
-_ACEOF
-
- LIBS="-lm $LIBS"
-
-fi
-
-
-# We need to link with -lw to get `wctype' on Solaris before Solaris
-# 2.6. Solaris 2.6 and beyond have this function in libc, and have a
-# libw that some versions of the GNU linker cannot hanle (GNU ld 2.9.1
-# is known to have this problem). Therefore we avoid libw if we can.
-ac_fn_c_check_func "$LINENO" "wctype" "ac_cv_func_wctype"
-if test "x$ac_cv_func_wctype" = x""yes; then :
-
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for wctype in -lw" >&5
-$as_echo_n "checking for wctype in -lw... " >&6; }
-if test "${ac_cv_lib_w_wctype+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lw $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char wctype ();
-int
-main ()
-{
-return wctype ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_lib_w_wctype=yes
-else
- ac_cv_lib_w_wctype=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_w_wctype" >&5
-$as_echo "$ac_cv_lib_w_wctype" >&6; }
-if test "x$ac_cv_lib_w_wctype" = x""yes; then :
- cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBW 1
-_ACEOF
-
- LIBS="-lw $LIBS"
-
-fi
-
-fi
-
-
-# Some systems (e.g. Solaris) have `gethostbyname' in libnsl.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing gethostbyname" >&5
-$as_echo_n "checking for library containing gethostbyname... " >&6; }
-if test "${ac_cv_search_gethostbyname+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- ac_func_search_save_LIBS=$LIBS
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char gethostbyname ();
-int
-main ()
-{
-return gethostbyname ();
- ;
- return 0;
-}
-_ACEOF
-for ac_lib in '' nsl; do
- if test -z "$ac_lib"; then
- ac_res="none required"
- else
- ac_res=-l$ac_lib
- LIBS="-l$ac_lib $ac_func_search_save_LIBS"
- fi
- if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_search_gethostbyname=$ac_res
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext
- if test "${ac_cv_search_gethostbyname+set}" = set; then :
- break
-fi
-done
-if test "${ac_cv_search_gethostbyname+set}" = set; then :
-
-else
- ac_cv_search_gethostbyname=no
-fi
-rm conftest.$ac_ext
-LIBS=$ac_func_search_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_gethostbyname" >&5
-$as_echo "$ac_cv_search_gethostbyname" >&6; }
-ac_res=$ac_cv_search_gethostbyname
-if test "$ac_res" != no; then :
- test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
-
-fi
-
-
-# Some systems (e.g. Solaris) have `socketpair' in libsocket.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing socketpair" >&5
-$as_echo_n "checking for library containing socketpair... " >&6; }
-if test "${ac_cv_search_socketpair+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- ac_func_search_save_LIBS=$LIBS
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char socketpair ();
-int
-main ()
-{
-return socketpair ();
- ;
- return 0;
-}
-_ACEOF
-for ac_lib in '' socket; do
- if test -z "$ac_lib"; then
- ac_res="none required"
- else
- ac_res=-l$ac_lib
- LIBS="-l$ac_lib $ac_func_search_save_LIBS"
- fi
- if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_search_socketpair=$ac_res
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext
- if test "${ac_cv_search_socketpair+set}" = set; then :
- break
-fi
-done
-if test "${ac_cv_search_socketpair+set}" = set; then :
-
-else
- ac_cv_search_socketpair=no
-fi
-rm conftest.$ac_ext
-LIBS=$ac_func_search_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_socketpair" >&5
-$as_echo "$ac_cv_search_socketpair" >&6; }
-ac_res=$ac_cv_search_socketpair
-if test "$ac_res" != no; then :
- test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
-
-fi
-
-
-# Link in zlib if we can. This allows us to read compressed debug sections.
-
- # See if the user specified whether he wants zlib support or not.
-
-# Check whether --with-zlib was given.
-if test "${with_zlib+set}" = set; then :
- withval=$with_zlib;
-else
- with_zlib=auto
-fi
-
-
- if test "$with_zlib" != "no"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing zlibVersion" >&5
-$as_echo_n "checking for library containing zlibVersion... " >&6; }
-if test "${ac_cv_search_zlibVersion+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- ac_func_search_save_LIBS=$LIBS
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char zlibVersion ();
-int
-main ()
-{
-return zlibVersion ();
- ;
- return 0;
-}
-_ACEOF
-for ac_lib in '' z; do
- if test -z "$ac_lib"; then
- ac_res="none required"
- else
- ac_res=-l$ac_lib
- LIBS="-l$ac_lib $ac_func_search_save_LIBS"
- fi
- if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_search_zlibVersion=$ac_res
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext
- if test "${ac_cv_search_zlibVersion+set}" = set; then :
- break
-fi
-done
-if test "${ac_cv_search_zlibVersion+set}" = set; then :
-
-else
- ac_cv_search_zlibVersion=no
-fi
-rm conftest.$ac_ext
-LIBS=$ac_func_search_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_zlibVersion" >&5
-$as_echo "$ac_cv_search_zlibVersion" >&6; }
-ac_res=$ac_cv_search_zlibVersion
-if test "$ac_res" != no; then :
- test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
- for ac_header in zlib.h
-do :
- ac_fn_c_check_header_mongrel "$LINENO" "zlib.h" "ac_cv_header_zlib_h" "$ac_includes_default"
-if test "x$ac_cv_header_zlib_h" = x""yes; then :
- cat >>confdefs.h <<_ACEOF
-#define HAVE_ZLIB_H 1
-_ACEOF
-
-fi
-
-done
-
-fi
-
- if test "$with_zlib" = "yes" -a "$ac_cv_header_zlib_h" != "yes"; then
- as_fn_error "zlib (libz) library was explicitly requested but not found" "$LINENO" 5
- fi
- fi
-
-
-# On HP/UX we may need libxpdl for dlgetmodinfo (used by solib-pa64.c).
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing dlgetmodinfo" >&5
-$as_echo_n "checking for library containing dlgetmodinfo... " >&6; }
-if test "${ac_cv_search_dlgetmodinfo+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- ac_func_search_save_LIBS=$LIBS
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlgetmodinfo ();
-int
-main ()
-{
-return dlgetmodinfo ();
- ;
- return 0;
-}
-_ACEOF
-for ac_lib in '' dl xpdl; do
- if test -z "$ac_lib"; then
- ac_res="none required"
- else
- ac_res=-l$ac_lib
- LIBS="-l$ac_lib $ac_func_search_save_LIBS"
- fi
- if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_search_dlgetmodinfo=$ac_res
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext
- if test "${ac_cv_search_dlgetmodinfo+set}" = set; then :
- break
-fi
-done
-if test "${ac_cv_search_dlgetmodinfo+set}" = set; then :
-
-else
- ac_cv_search_dlgetmodinfo=no
-fi
-rm conftest.$ac_ext
-LIBS=$ac_func_search_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_dlgetmodinfo" >&5
-$as_echo "$ac_cv_search_dlgetmodinfo" >&6; }
-ac_res=$ac_cv_search_dlgetmodinfo
-if test "$ac_res" != no; then :
- test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
-
-fi
-
-
-
-
-
-# Check whether --with-libiconv-prefix was given.
-if test "${with_libiconv_prefix+set}" = set; then :
- withval=$with_libiconv_prefix;
- for dir in `echo "$withval" | tr : ' '`; do
- if test -d $dir/include; then LIBICONV_INCLUDE="-I$dir/include"; fi
- if test -d $dir/lib; then LIBICONV_LIBDIR="-L$dir/lib"; fi
- done
-
-fi
-
-
- BUILD_LIBICONV_LIBDIRS="../libiconv/lib/.libs ../libiconv/lib/_libs"
- BUILD_LIBICONV_INCLUDE="-I../libiconv/include"
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for iconv" >&5
-$as_echo_n "checking for iconv... " >&6; }
-if test "${am_cv_func_iconv+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
-
- am_cv_func_iconv="no, consider installing GNU libiconv"
- am_cv_lib_iconv=no
- am_cv_use_build_libiconv=no
- am_cv_build_libiconv_path=
-
- # If libiconv is part of the build tree, then try using it over
- # any system iconv.
- if test -d ../libiconv; then
- for lib_dir in $BUILD_LIBICONV_LIBDIRS; do
- am_save_LIBS="$LIBS"
- am_save_CPPFLAGS="$CPPFLAGS"
- LIBS="$LIBS $lib_dir/libiconv.a"
- CPPFLAGS="$CPPFLAGS $BUILD_LIBICONV_INCLUDE"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <stdlib.h>
-#include <iconv.h>
-int
-main ()
-{
-iconv_t cd = iconv_open("","");
- iconv(cd,NULL,NULL,NULL,NULL);
- iconv_close(cd);
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- am_cv_use_build_libiconv=yes
- am_cv_build_libiconv_path=$lib_dir/libiconv.a
- am_cv_lib_iconv=yes
- am_cv_func_iconv=yes
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- LIBS="$am_save_LIBS"
- CPPFLAGS="$am_save_CPPFLAGS"
- if test "$am_cv_use_build_libiconv" = "yes"; then
- break
- fi
- done
- fi
-
- # Next, try to find iconv in libc.
- if test "$am_cv_func_iconv" != yes; then
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <stdlib.h>
-#include <iconv.h>
-int
-main ()
-{
-iconv_t cd = iconv_open("","");
- iconv(cd,NULL,NULL,NULL,NULL);
- iconv_close(cd);
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- am_cv_func_iconv=yes
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- fi
-
- # If iconv was not in libc, try -liconv. In this case, arrange to
- # look in the libiconv prefix, if it was specified by the user.
- if test "$am_cv_func_iconv" != yes; then
- am_save_CPPFLAGS="$CPPFLAGS"
- am_save_LIBS="$LIBS"
- if test -n "$LIBICONV_INCLUDE"; then
- CPPFLAGS="$CPPFLAGS $LIBICONV_INCLUDE"
- LIBS="$LIBS $LIBICONV_LIBDIR"
- fi
- LIBS="$LIBS -liconv"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <stdlib.h>
-#include <iconv.h>
-int
-main ()
-{
-iconv_t cd = iconv_open("","");
- iconv(cd,NULL,NULL,NULL,NULL);
- iconv_close(cd);
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- am_cv_lib_iconv=yes
- am_cv_func_iconv=yes
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- LIBS="$am_save_LIBS"
- CPPFLAGS="$am_save_CPPFLAGS"
- fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv" >&5
-$as_echo "$am_cv_func_iconv" >&6; }
-
- # Set the various flags based on the cache variables. We can't rely
- # on the flags to remain set from the above code, due to caching.
- LIBICONV=
- if test "$am_cv_lib_iconv" = yes; then
- LIBICONV="-liconv"
- else
- LIBICONV_LIBDIR=
- LIBICONV_INCLUDE=
- fi
- if test "$am_cv_use_build_libiconv" = yes; then
- LIBICONV="$am_cv_build_libiconv_path"
- LIBICONV_LIBDIR=""
- LIBICONV_INCLUDE="$BUILD_LIBICONV_INCLUDE"
- fi
- CPPFLAGS="$CPPFLAGS $LIBICONV_INCLUDE"
- LIBS="$LIBS $LIBICONV_LIBDIR $LIBICONV"
-
- if test "$am_cv_func_iconv" = yes; then
-
-$as_echo "#define HAVE_ICONV 1" >>confdefs.h
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for iconv declaration" >&5
-$as_echo_n "checking for iconv declaration... " >&6; }
- if test "${am_cv_proto_iconv+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
-
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-#include <stdlib.h>
-#include <iconv.h>
-extern
-#ifdef __cplusplus
-"C"
-#endif
-#if defined(__STDC__) || defined(__cplusplus)
-size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
-#else
-size_t iconv();
-#endif
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- am_cv_proto_iconv_arg1=""
-else
- am_cv_proto_iconv_arg1="const"
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"
-fi
-
- am_cv_proto_iconv=`echo "$am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'`
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${ac_t:-
- }$am_cv_proto_iconv" >&5
-$as_echo "${ac_t:-
- }$am_cv_proto_iconv" >&6; }
-
-cat >>confdefs.h <<_ACEOF
-#define ICONV_CONST $am_cv_proto_iconv_arg1
-_ACEOF
-
- fi
-
-
-# On alpha-osf, it appears that libtermcap and libcurses are not compatible.
-# There is a very specific comment in /usr/include/curses.h explaining that
-# termcap routines built into libcurses must not be used.
-#
-# The symptoms we observed so far is GDB unexpectedly changing
-# the terminal settings when tgetent is called - this is particularly
-# visible as the output is missing carriage returns, and so rapidly
-# becomes very hard to read.
-#
-# The readline configure script has already decided that libtermcap
-# was enough for its purposes, and so decided to build readline using
-# libtermcap. Since the TUI mode requires curses, building GDB with
-# TUI enabled results in both libraries to be used at the same time,
-# which is not allowed. This basically means that GDB with TUI is
-# broken on alpha-osf.
-
-case $host_os in
- osf* )
- if test x"$enable_tui" = xyes; then
- as_fn_error "Building GDB with TUI mode is not supported on this host" "$LINENO" 5
- fi
- if test x"$enable_tui" = xauto; then
- enable_tui=no
- fi
- ;;
-esac
-
-# For the TUI, we need enhanced curses functionality.
-if test x"$enable_tui" != xno; then
- prefer_curses=yes
-fi
-
-curses_found=no
-if test x"$prefer_curses" = xyes; then
- # FIXME: kettenis/20040905: We prefer ncurses over the vendor-supplied
- # curses library because the latter might not provide all the
- # functionality we need. However, this leads to problems on systems
- # where the linker searches /usr/local/lib, but the compiler doesn't
- # search /usr/local/include, if ncurses is installed in /usr/local. A
- # default installation of ncurses on alpha*-dec-osf* will lead to such
- # a situation.
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing waddstr" >&5
-$as_echo_n "checking for library containing waddstr... " >&6; }
-if test "${ac_cv_search_waddstr+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- ac_func_search_save_LIBS=$LIBS
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char waddstr ();
-int
-main ()
-{
-return waddstr ();
- ;
- return 0;
-}
-_ACEOF
-for ac_lib in '' ncurses cursesX curses; do
- if test -z "$ac_lib"; then
- ac_res="none required"
- else
- ac_res=-l$ac_lib
- LIBS="-l$ac_lib $ac_func_search_save_LIBS"
- fi
- if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_search_waddstr=$ac_res
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext
- if test "${ac_cv_search_waddstr+set}" = set; then :
- break
-fi
-done
-if test "${ac_cv_search_waddstr+set}" = set; then :
-
-else
- ac_cv_search_waddstr=no
-fi
-rm conftest.$ac_ext
-LIBS=$ac_func_search_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_waddstr" >&5
-$as_echo "$ac_cv_search_waddstr" >&6; }
-ac_res=$ac_cv_search_waddstr
-if test "$ac_res" != no; then :
- test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
-
-fi
-
-
- if test "$ac_cv_search_waddstr" != no; then
- curses_found=yes
- fi
-fi
-
-# Check whether we should enable the TUI, but only do so if we really
-# can.
-if test x"$enable_tui" != xno; then
- if test -d $srcdir/tui; then
- if test "$curses_found" != no; then
- CONFIG_OBS="$CONFIG_OBS \$(SUBDIR_TUI_OBS)"
- CONFIG_DEPS="$CONFIG_DEPS \$(SUBDIR_TUI_DEPS)"
- CONFIG_SRCS="$CONFIG_SRCS \$(SUBDIR_TUI_SRCS)"
- ENABLE_CFLAGS="$ENABLE_CFLAGS \$(SUBDIR_TUI_CFLAGS)"
- CONFIG_ALL="${CONFIG_ALL} all-tui"
- CONFIG_CLEAN="${CONFIG_CLEAN} clean-tui"
- CONFIG_INSTALL="${CONFIG_INSTALL} install-tui"
- CONFIG_UNINSTALL="${CONFIG_UNINSTALL} uninstall-tui"
- else
- if test x"$enable_tui" = xyes; then
- as_fn_error "no enhanced curses library found; disable TUI" "$LINENO" 5
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: no enhanced curses library found; disabling TUI" >&5
-$as_echo "$as_me: WARNING: no enhanced curses library found; disabling TUI" >&2;}
- fi
- fi
- fi
-fi
-
-# Since GDB uses Readline, we need termcap functionality. In many
-# cases this will be provided by the curses library, but some systems
-# have a seperate termcap library, or no curses library at all.
-
-case $host_os in
- cygwin*)
- if test -d $srcdir/libtermcap; then
- LIBS="../libtermcap/libtermcap.a $LIBS"
- ac_cv_search_tgetent="../libtermcap/libtermcap.a"
- fi ;;
- go32* | *djgpp*)
- ac_cv_search_tgetent="none required"
- ;;
- *mingw32*)
- ac_cv_search_tgetent="none required"
- CONFIG_OBS="$CONFIG_OBS windows-termcap.o"
- ;;
-esac
-
-# These are the libraries checked by Readline.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing tgetent" >&5
-$as_echo_n "checking for library containing tgetent... " >&6; }
-if test "${ac_cv_search_tgetent+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- ac_func_search_save_LIBS=$LIBS
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char tgetent ();
-int
-main ()
-{
-return tgetent ();
- ;
- return 0;
-}
-_ACEOF
-for ac_lib in '' termcap tinfo curses ncurses; do
- if test -z "$ac_lib"; then
- ac_res="none required"
- else
- ac_res=-l$ac_lib
- LIBS="-l$ac_lib $ac_func_search_save_LIBS"
- fi
- if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_search_tgetent=$ac_res
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext
- if test "${ac_cv_search_tgetent+set}" = set; then :
- break
-fi
-done
-if test "${ac_cv_search_tgetent+set}" = set; then :
-
-else
- ac_cv_search_tgetent=no
-fi
-rm conftest.$ac_ext
-LIBS=$ac_func_search_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_tgetent" >&5
-$as_echo "$ac_cv_search_tgetent" >&6; }
-ac_res=$ac_cv_search_tgetent
-if test "$ac_res" != no; then :
- test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
-
-fi
-
-
-if test "$ac_cv_search_tgetent" = no; then
- as_fn_error "no termcap library found" "$LINENO" 5
-fi
-
-
-# Check whether --with-system-readline was given.
-if test "${with_system_readline+set}" = set; then :
- withval=$with_system_readline;
-fi
-
-
-if test "$with_system_readline" = yes; then
- READLINE=-lreadline
- READLINE_DEPS=
- READLINE_CFLAGS=
-
- # readline-6.0 started to use the name `_rl_echoing_p'.
- # `$(READLINE_DIR)/' of bundled readline would not resolve in configure.
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for readline_echoing_p" >&5
-$as_echo_n "checking for readline_echoing_p... " >&6; }
- save_LIBS=$LIBS
- LIBS="$LIBS $READLINE"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-extern int readline_echoing_p;
- return readline_echoing_p;
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- READLINE_ECHOING_P=yes
-else
- READLINE_ECHOING_P=no
-
-$as_echo "#define readline_echoing_p _rl_echoing_p" >>confdefs.h
-
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- LIBS="$save_LIBS"
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $READLINE_ECHOING_P" >&5
-$as_echo "$READLINE_ECHOING_P" >&6; }
-else
- READLINE='$(READLINE_DIR)/libreadline.a'
- READLINE_DEPS='$(READLINE)'
- READLINE_CFLAGS='-I$(READLINE_SRC)/..'
-fi
-
-
-
-
-
-# Check whether --with-expat was given.
-if test "${with_expat+set}" = set; then :
- withval=$with_expat;
-else
- with_expat=auto
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use expat" >&5
-$as_echo_n "checking whether to use expat... " >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_expat" >&5
-$as_echo "$with_expat" >&6; }
-
-if test "${with_expat}" = no; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: expat support disabled; some features may be unavailable." >&5
-$as_echo "$as_me: WARNING: expat support disabled; some features may be unavailable." >&2;}
- HAVE_LIBEXPAT=no
-else
-
- if test "X$prefix" = "XNONE"; then
- acl_final_prefix="$ac_default_prefix"
- else
- acl_final_prefix="$prefix"
- fi
- if test "X$exec_prefix" = "XNONE"; then
- acl_final_exec_prefix='${prefix}'
- else
- acl_final_exec_prefix="$exec_prefix"
- fi
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
- prefix="$acl_save_prefix"
-
-
-# Check whether --with-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then :
- withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
-else
- with_gnu_ld=no
-fi
-
-# Prepare PATH_SEPARATOR.
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
-ac_prog=ld
-if test "$GCC" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by GCC" >&5
-$as_echo_n "checking for ld used by GCC... " >&6; }
- case $host in
- *-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
- *)
- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
- esac
- case $ac_prog in
- # Accept absolute paths.
- [\\/]* | [A-Za-z]:[\\/]*)
- re_direlt='/[^/][^/]*/\.\./'
- # Canonicalize the path of ld
- ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
- done
- test -z "$LD" && LD="$ac_prog"
- ;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ac_prog=ld
- ;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
- ;;
- esac
-elif test "$with_gnu_ld" = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
-$as_echo_n "checking for GNU ld... " >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
-$as_echo_n "checking for non-GNU ld... " >&6; }
-fi
-if test "${acl_cv_path_LD+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- acl_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some GNU ld's only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- if "$acl_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
- test "$with_gnu_ld" != no && break
- else
- test "$with_gnu_ld" != yes && break
- fi
- fi
- done
- IFS="$ac_save_ifs"
-else
- acl_cv_path_LD="$LD" # Let the user override the test with a path.
-fi
-fi
-
-LD="$acl_cv_path_LD"
-if test -n "$LD"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
-$as_echo "$LD" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-test -z "$LD" && as_fn_error "no acceptable ld found in \$PATH" "$LINENO" 5
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
-$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
-if test "${acl_cv_prog_gnu_ld+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- # I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
- acl_cv_prog_gnu_ld=yes
-else
- acl_cv_prog_gnu_ld=no
-fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_prog_gnu_ld" >&5
-$as_echo "$acl_cv_prog_gnu_ld" >&6; }
-with_gnu_ld=$acl_cv_prog_gnu_ld
-
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shared library run path origin" >&5
-$as_echo_n "checking for shared library run path origin... " >&6; }
-if test "${acl_cv_rpath+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
-
- CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
- ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
- . ./conftest.sh
- rm -f ./conftest.sh
- acl_cv_rpath=done
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_rpath" >&5
-$as_echo "$acl_cv_rpath" >&6; }
- wl="$acl_cv_wl"
- libext="$acl_cv_libext"
- shlibext="$acl_cv_shlibext"
- hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
- hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
- hardcode_direct="$acl_cv_hardcode_direct"
- hardcode_minus_L="$acl_cv_hardcode_minus_L"
- # Check whether --enable-rpath was given.
-if test "${enable_rpath+set}" = set; then :
- enableval=$enable_rpath; :
-else
- enable_rpath=yes
-fi
-
-
-
-
-
-
-
-
-
-
- use_additional=yes
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
-
- eval additional_includedir=\"$includedir\"
- eval additional_libdir=\"$libdir\"
-
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
-
-# Check whether --with-libexpat-prefix was given.
-if test "${with_libexpat_prefix+set}" = set; then :
- withval=$with_libexpat_prefix;
- if test "X$withval" = "Xno"; then
- use_additional=no
- else
- if test "X$withval" = "X"; then
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
-
- eval additional_includedir=\"$includedir\"
- eval additional_libdir=\"$libdir\"
-
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- else
- additional_includedir="$withval/include"
- additional_libdir="$withval/lib"
- fi
- fi
-
-fi
-
- LIBEXPAT=
- LTLIBEXPAT=
- INCEXPAT=
- rpathdirs=
- ltrpathdirs=
- names_already_handled=
- names_next_round='expat '
- while test -n "$names_next_round"; do
- names_this_round="$names_next_round"
- names_next_round=
- for name in $names_this_round; do
- already_handled=
- for n in $names_already_handled; do
- if test "$n" = "$name"; then
- already_handled=yes
- break
- fi
- done
- if test -z "$already_handled"; then
- names_already_handled="$names_already_handled $name"
- uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
- eval value=\"\$HAVE_LIB$uppername\"
- if test -n "$value"; then
- if test "$value" = yes; then
- eval value=\"\$LIB$uppername\"
- test -z "$value" || LIBEXPAT="${LIBEXPAT}${LIBEXPAT:+ }$value"
- eval value=\"\$LTLIB$uppername\"
- test -z "$value" || LTLIBEXPAT="${LTLIBEXPAT}${LTLIBEXPAT:+ }$value"
- else
- :
- fi
- else
- found_dir=
- found_la=
- found_so=
- found_a=
- if test $use_additional = yes; then
- if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then
- found_dir="$additional_libdir"
- found_so="$additional_libdir/lib$name.$shlibext"
- if test -f "$additional_libdir/lib$name.la"; then
- found_la="$additional_libdir/lib$name.la"
- fi
- else
- if test -f "$additional_libdir/lib$name.$libext"; then
- found_dir="$additional_libdir"
- found_a="$additional_libdir/lib$name.$libext"
- if test -f "$additional_libdir/lib$name.la"; then
- found_la="$additional_libdir/lib$name.la"
- fi
- fi
- fi
- fi
- if test "X$found_dir" = "X"; then
- for x in $LDFLAGS $LTLIBEXPAT; do
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- eval x=\"$x\"
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"