+
+
+void
+child_post_follow_inferior_by_clone (void)
+{
+ int status;
+
+ /* This function is used when following both the parent and child
+ of a fork. In this case, the debugger clones itself. The original
+ debugger follows the parent, the clone follows the child. The
+ original detaches from the child, delivering a SIGSTOP to it to
+ keep it from running away until the clone can attach itself.
+
+ At this point, the clone has attached to the child. Because of
+ the SIGSTOP, we must now deliver a SIGCONT to the child, or it
+ won't behave properly. */
+ status = kill (PIDGET (inferior_ptid), SIGCONT);
+}
+
+
+void
+child_post_follow_vfork (int parent_pid, int followed_parent, int child_pid,
+ int followed_child)
+{
+ /* Are we a debugger that followed the parent of a vfork? If so,
+ then recall that the child's vfork event was delivered to us
+ first. And, that the parent was suspended by the OS until the
+ child's exec or exit events were received.
+
+ Upon receiving that child vfork, then, we were forced to remove
+ all breakpoints in the child and continue it so that it could
+ reach the exec or exit point.
+
+ But also recall that the parent and child of a vfork share the
+ same address space. Thus, removing bp's in the child also
+ removed them from the parent.
+
+ Now that the child has safely exec'd or exited, we must restore
+ the parent's breakpoints before we continue it. Else, we may
+ cause it run past expected stopping points. */
+ if (followed_parent)
+ {
+ reattach_breakpoints (parent_pid);
+ }
+
+ /* Are we a debugger that followed the child of a vfork? If so,
+ then recall that we don't actually acquire control of the child
+ until after it has exec'd or exited. */
+ if (followed_child)
+ {
+ /* If the child has exited, then there's nothing for us to do.
+ In the case of an exec event, we'll let that be handled by
+ the normal mechanism that notices and handles exec events, in
+ resume(). */
+ }
+}
+
+/* Format a process id, given PID. Be sure to terminate
+ this with a null--it's going to be printed via a "%s". */
+char *
+child_pid_to_str (ptid_t ptid)
+{
+ /* Static because address returned */
+ static char buf[30];
+ pid_t pid = PIDGET (ptid);
+
+ /* Extra NUL for paranoia's sake */
+ sprintf (buf, "process %d%c", pid, '\0');
+
+ return buf;
+}
+
+/* Format a thread id, given TID. Be sure to terminate
+ this with a null--it's going to be printed via a "%s".
+
+ Note: This is a core-gdb tid, not the actual system tid.
+ See infttrace.c for details. */
+char *
+hppa_tid_to_str (ptid_t ptid)
+{
+ /* Static because address returned */
+ static char buf[30];
+ /* This seems strange, but when I did the ptid conversion, it looked
+ as though a pid was always being passed. - Kevin Buettner */
+ pid_t tid = PIDGET (ptid);
+
+ /* Extra NULLs for paranoia's sake */
+ sprintf (buf, "system thread %d%c", tid, '\0');
+
+ return buf;
+}
+
+#if !defined (GDB_NATIVE_HPUX_11)
+
+/* The following code is a substitute for the infttrace.c versions used
+ with ttrace() in HPUX 11. */
+
+/* This value is an arbitrary integer. */
+#define PT_VERSION 123456
+
+/* This semaphore is used to coordinate the child and parent processes
+ after a fork(), and before an exec() by the child. See
+ parent_attach_all for details. */
+
+typedef struct
+{
+ int parent_channel[2]; /* Parent "talks" to [1], child "listens" to [0] */
+ int child_channel[2]; /* Child "talks" to [1], parent "listens" to [0] */
+}
+startup_semaphore_t;
+
+#define SEM_TALK (1)
+#define SEM_LISTEN (0)
+
+static startup_semaphore_t startup_semaphore;
+
+extern int parent_attach_all (int, PTRACE_ARG3_TYPE, int);
+
+#ifdef PT_SETTRC
+/* This function causes the caller's process to be traced by its
+ parent. This is intended to be called after GDB forks itself,
+ and before the child execs the target.
+
+ Note that HP-UX ptrace is rather funky in how this is done.
+ If the parent wants to get the initial exec event of a child,
+ it must set the ptrace event mask of the child to include execs.
+ (The child cannot do this itself.) This must be done after the
+ child is forked, but before it execs.
+
+ To coordinate the parent and child, we implement a semaphore using
+ pipes. After SETTRC'ing itself, the child tells the parent that
+ it is now traceable by the parent, and waits for the parent's
+ acknowledgement. The parent can then set the child's event mask,
+ and notify the child that it can now exec.
+
+ (The acknowledgement by parent happens as a result of a call to
+ child_acknowledge_created_inferior.) */
+
+int
+parent_attach_all (int pid, PTRACE_ARG3_TYPE addr, int data)
+{
+ int pt_status = 0;
+
+ /* We need a memory home for a constant. */
+ int tc_magic_child = PT_VERSION;
+ int tc_magic_parent = 0;
+
+ /* The remainder of this function is only useful for HPUX 10.0 and
+ later, as it depends upon the ability to request notification
+ of specific kinds of events by the kernel. */
+#if defined(PT_SET_EVENT_MASK)
+
+ /* Notify the parent that we're potentially ready to exec(). */
+ write (startup_semaphore.child_channel[SEM_TALK],
+ &tc_magic_child,
+ sizeof (tc_magic_child));
+
+ /* Wait for acknowledgement from the parent. */
+ read (startup_semaphore.parent_channel[SEM_LISTEN],
+ &tc_magic_parent,
+ sizeof (tc_magic_parent));
+ if (tc_magic_child != tc_magic_parent)
+ warning ("mismatched semaphore magic");
+
+ /* Discard our copy of the semaphore. */
+ (void) close (startup_semaphore.parent_channel[SEM_LISTEN]);
+ (void) close (startup_semaphore.parent_channel[SEM_TALK]);
+ (void) close (startup_semaphore.child_channel[SEM_LISTEN]);
+ (void) close (startup_semaphore.child_channel[SEM_TALK]);
+#endif
+
+ return 0;
+}
+#endif
+
+int
+hppa_require_attach (int pid)
+{
+ int pt_status;
+ CORE_ADDR pc;
+ CORE_ADDR pc_addr;
+ unsigned int regs_offset;
+
+ /* Are we already attached? There appears to be no explicit way to
+ answer this via ptrace, so we try something which should be
+ innocuous if we are attached. If that fails, then we assume
+ we're not attached, and so attempt to make it so. */
+
+ errno = 0;
+ regs_offset = U_REGS_OFFSET;
+ pc_addr = register_addr (PC_REGNUM, regs_offset);
+ pc = call_ptrace (PT_READ_U, pid, (PTRACE_ARG3_TYPE) pc_addr, 0);
+
+ if (errno)
+ {
+ errno = 0;
+ pt_status = call_ptrace (PT_ATTACH, pid, (PTRACE_ARG3_TYPE) 0, 0);
+
+ if (errno)
+ return -1;
+
+ /* Now we really are attached. */
+ errno = 0;
+ }
+ attach_flag = 1;
+ return pid;
+}
+
+int
+hppa_require_detach (int pid, int signal)
+{
+ errno = 0;
+ call_ptrace (PT_DETACH, pid, (PTRACE_ARG3_TYPE) 1, signal);
+ errno = 0; /* Ignore any errors. */
+ return pid;
+}
+
+/* Since ptrace doesn't support memory page-protection events, which
+ are used to implement "hardware" watchpoints on HP-UX, these are
+ dummy versions, which perform no useful work. */
+
+void
+hppa_enable_page_protection_events (int pid)
+{
+}
+
+void
+hppa_disable_page_protection_events (int pid)
+{
+}
+
+int
+hppa_insert_hw_watchpoint (int pid, CORE_ADDR start, LONGEST len, int type)
+{
+ error ("Hardware watchpoints not implemented on this platform.");
+}
+
+int
+hppa_remove_hw_watchpoint (int pid, CORE_ADDR start, LONGEST len,
+ enum bptype type)
+{
+ error ("Hardware watchpoints not implemented on this platform.");
+}
+
+int
+hppa_can_use_hw_watchpoint (enum bptype type, int cnt, enum bptype ot)
+{
+ return 0;
+}
+
+int
+hppa_range_profitable_for_hw_watchpoint (int pid, CORE_ADDR start, LONGEST len)
+{
+ error ("Hardware watchpoints not implemented on this platform.");
+}
+
+char *
+hppa_pid_or_tid_to_str (ptid_t id)
+{
+ /* In the ptrace world, there are only processes. */
+ return child_pid_to_str (id);
+}
+
+/* This function has no meaning in a non-threaded world. Thus, we
+ return 0 (FALSE). See the use of "hppa_prepare_to_proceed" in
+ hppa-tdep.c. */
+
+pid_t
+hppa_switched_threads (pid_t pid)
+{
+ return (pid_t) 0;
+}
+
+void
+hppa_ensure_vforking_parent_remains_stopped (int pid)
+{
+ /* This assumes that the vforked parent is presently stopped, and
+ that the vforked child has just delivered its first exec event.
+ Calling kill() this way will cause the SIGTRAP to be delivered as
+ soon as the parent is resumed, which happens as soon as the
+ vforked child is resumed. See wait_for_inferior for the use of
+ this function. */
+ kill (pid, SIGTRAP);
+}
+
+int
+hppa_resume_execd_vforking_child_to_get_parent_vfork (void)
+{
+ return 1; /* Yes, the child must be resumed. */
+}
+
+void
+require_notification_of_events (int pid)
+{
+#if defined(PT_SET_EVENT_MASK)
+ int pt_status;
+ ptrace_event_t ptrace_events;
+ int nsigs;
+ int signum;
+
+ /* Instruct the kernel as to the set of events we wish to be
+ informed of. (This support does not exist before HPUX 10.0.
+ We'll assume if PT_SET_EVENT_MASK has not been defined by
+ <sys/ptrace.h>, then we're being built on pre-10.0.) */
+ memset (&ptrace_events, 0, sizeof (ptrace_events));
+
+ /* Note: By default, all signals are visible to us. If we wish
+ the kernel to keep certain signals hidden from us, we do it
+ by calling sigdelset (ptrace_events.pe_signals, signal) for
+ each such signal here, before doing PT_SET_EVENT_MASK. */
+ /* RM: The above comment is no longer true. We start with ignoring
+ all signals, and then add the ones we are interested in. We could
+ do it the other way: start by looking at all signals and then
+ deleting the ones that we aren't interested in, except that
+ multiple gdb signals may be mapped to the same host signal
+ (eg. TARGET_SIGNAL_IO and TARGET_SIGNAL_POLL both get mapped to
+ signal 22 on HPUX 10.20) We want to be notified if we are
+ interested in either signal. */
+ sigfillset (&ptrace_events.pe_signals);
+
+ /* RM: Let's not bother with signals we don't care about */
+ nsigs = (int) TARGET_SIGNAL_LAST;
+ for (signum = nsigs; signum > 0; signum--)
+ {
+ if ((signal_stop_state (signum)) ||
+ (signal_print_state (signum)) ||
+ (!signal_pass_state (signum)))
+ {
+ if (target_signal_to_host_p (signum))
+ sigdelset (&ptrace_events.pe_signals,
+ target_signal_to_host (signum));
+ }
+ }
+
+ ptrace_events.pe_set_event = 0;
+
+ ptrace_events.pe_set_event |= PTRACE_SIGNAL;
+ ptrace_events.pe_set_event |= PTRACE_EXEC;
+ ptrace_events.pe_set_event |= PTRACE_FORK;
+ ptrace_events.pe_set_event |= PTRACE_VFORK;
+ /* ??rehrauer: Add this one when we're prepared to catch it...
+ ptrace_events.pe_set_event |= PTRACE_EXIT;
+ */
+
+ errno = 0;
+ pt_status = call_ptrace (PT_SET_EVENT_MASK,
+ pid,
+ (PTRACE_ARG3_TYPE) & ptrace_events,
+ sizeof (ptrace_events));
+ if (errno)
+ perror_with_name ("ptrace");
+ if (pt_status < 0)
+ return;
+#endif
+}
+
+void
+require_notification_of_exec_events (int pid)
+{
+#if defined(PT_SET_EVENT_MASK)
+ int pt_status;
+ ptrace_event_t ptrace_events;
+
+ /* Instruct the kernel as to the set of events we wish to be
+ informed of. (This support does not exist before HPUX 10.0.
+ We'll assume if PT_SET_EVENT_MASK has not been defined by
+ <sys/ptrace.h>, then we're being built on pre-10.0.) */
+ memset (&ptrace_events, 0, sizeof (ptrace_events));
+
+ /* Note: By default, all signals are visible to us. If we wish
+ the kernel to keep certain signals hidden from us, we do it
+ by calling sigdelset (ptrace_events.pe_signals, signal) for
+ each such signal here, before doing PT_SET_EVENT_MASK. */
+ sigemptyset (&ptrace_events.pe_signals);
+
+ ptrace_events.pe_set_event = 0;
+
+ ptrace_events.pe_set_event |= PTRACE_EXEC;
+ /* ??rehrauer: Add this one when we're prepared to catch it...
+ ptrace_events.pe_set_event |= PTRACE_EXIT;
+ */
+
+ errno = 0;
+ pt_status = call_ptrace (PT_SET_EVENT_MASK,
+ pid,
+ (PTRACE_ARG3_TYPE) & ptrace_events,
+ sizeof (ptrace_events));
+ if (errno)
+ perror_with_name ("ptrace");
+ if (pt_status < 0)
+ return;
+#endif
+}
+
+/* This function is called by the parent process, with pid being the
+ ID of the child process, after the debugger has forked. */
+
+void
+child_acknowledge_created_inferior (int pid)
+{
+ /* We need a memory home for a constant. */
+ int tc_magic_parent = PT_VERSION;
+ int tc_magic_child = 0;
+
+ /* The remainder of this function is only useful for HPUX 10.0 and
+ later, as it depends upon the ability to request notification
+ of specific kinds of events by the kernel. */
+#if defined(PT_SET_EVENT_MASK)
+ /* Wait for the child to tell us that it has forked. */
+ read (startup_semaphore.child_channel[SEM_LISTEN],
+ &tc_magic_child,
+ sizeof (tc_magic_child));
+
+ /* Notify the child that it can exec.
+
+ In the infttrace.c variant of this function, we set the child's
+ event mask after the fork but before the exec. In the ptrace
+ world, it seems we can't set the event mask until after the exec. */
+ write (startup_semaphore.parent_channel[SEM_TALK],
+ &tc_magic_parent,
+ sizeof (tc_magic_parent));
+
+ /* We'd better pause a bit before trying to set the event mask,
+ though, to ensure that the exec has happened. We don't want to
+ wait() on the child, because that'll screw up the upper layers
+ of gdb's execution control that expect to see the exec event.
+
+ After an exec, the child is no longer executing gdb code. Hence,
+ we can't have yet another synchronization via the pipes. We'll
+ just sleep for a second, and hope that's enough delay... */
+ sleep (1);
+
+ /* Instruct the kernel as to the set of events we wish to be
+ informed of. */
+ require_notification_of_exec_events (pid);
+
+ /* Discard our copy of the semaphore. */
+ (void) close (startup_semaphore.parent_channel[SEM_LISTEN]);
+ (void) close (startup_semaphore.parent_channel[SEM_TALK]);
+ (void) close (startup_semaphore.child_channel[SEM_LISTEN]);
+ (void) close (startup_semaphore.child_channel[SEM_TALK]);
+#endif
+}
+
+void
+child_post_startup_inferior (ptid_t ptid)
+{
+ require_notification_of_events (PIDGET (ptid));
+}
+
+void
+child_post_attach (int pid)
+{
+ require_notification_of_events (pid);
+}
+
+int
+child_insert_fork_catchpoint (int pid)
+{
+ /* This request is only available on HPUX 10.0 and later. */
+#if !defined(PT_SET_EVENT_MASK)
+ error ("Unable to catch forks prior to HPUX 10.0");
+#else
+ /* Enable reporting of fork events from the kernel. */
+ /* ??rehrauer: For the moment, we're always enabling these events,
+ and just ignoring them if there's no catchpoint to catch them. */
+ return 0;
+#endif
+}
+
+int
+child_remove_fork_catchpoint (int pid)
+{
+ /* This request is only available on HPUX 10.0 and later. */
+#if !defined(PT_SET_EVENT_MASK)
+ error ("Unable to catch forks prior to HPUX 10.0");
+#else
+ /* Disable reporting of fork events from the kernel. */
+ /* ??rehrauer: For the moment, we're always enabling these events,
+ and just ignoring them if there's no catchpoint to catch them. */
+ return 0;
+#endif
+}
+
+int
+child_insert_vfork_catchpoint (int pid)
+{
+ /* This request is only available on HPUX 10.0 and later. */
+#if !defined(PT_SET_EVENT_MASK)
+ error ("Unable to catch vforks prior to HPUX 10.0");
+#else
+ /* Enable reporting of vfork events from the kernel. */
+ /* ??rehrauer: For the moment, we're always enabling these events,
+ and just ignoring them if there's no catchpoint to catch them. */
+ return 0;
+#endif
+}
+
+int
+child_remove_vfork_catchpoint (int pid)
+{
+ /* This request is only available on HPUX 10.0 and later. */
+#if !defined(PT_SET_EVENT_MASK)
+ error ("Unable to catch vforks prior to HPUX 10.0");
+#else
+ /* Disable reporting of vfork events from the kernel. */
+ /* ??rehrauer: For the moment, we're always enabling these events,
+ and just ignoring them if there's no catchpoint to catch them. */
+ return 0;
+#endif
+}
+
+int
+child_has_forked (int pid, int *childpid)
+{
+ /* This request is only available on HPUX 10.0 and later. */
+#if !defined(PT_GET_PROCESS_STATE)
+ *childpid = 0;
+ return 0;
+#else
+ int pt_status;
+ ptrace_state_t ptrace_state;
+
+ errno = 0;
+ pt_status = call_ptrace (PT_GET_PROCESS_STATE,
+ pid,
+ (PTRACE_ARG3_TYPE) & ptrace_state,
+ sizeof (ptrace_state));
+ if (errno)
+ perror_with_name ("ptrace");
+ if (pt_status < 0)
+ return 0;
+
+ if (ptrace_state.pe_report_event & PTRACE_FORK)
+ {
+ *childpid = ptrace_state.pe_other_pid;
+ return 1;
+ }
+
+ return 0;
+#endif
+}
+
+int
+child_has_vforked (int pid, int *childpid)
+{
+ /* This request is only available on HPUX 10.0 and later. */
+#if !defined(PT_GET_PROCESS_STATE)
+ *childpid = 0;
+ return 0;
+
+#else
+ int pt_status;
+ ptrace_state_t ptrace_state;
+
+ errno = 0;
+ pt_status = call_ptrace (PT_GET_PROCESS_STATE,
+ pid,
+ (PTRACE_ARG3_TYPE) & ptrace_state,
+ sizeof (ptrace_state));
+ if (errno)
+ perror_with_name ("ptrace");
+ if (pt_status < 0)
+ return 0;
+
+ if (ptrace_state.pe_report_event & PTRACE_VFORK)
+ {
+ *childpid = ptrace_state.pe_other_pid;
+ return 1;
+ }
+
+ return 0;
+#endif
+}
+
+int
+child_can_follow_vfork_prior_to_exec (void)
+{
+ /* ptrace doesn't allow this. */
+ return 0;
+}
+
+int
+child_insert_exec_catchpoint (int pid)
+{
+ /* This request is only available on HPUX 10.0 and later. */
+#if !defined(PT_SET_EVENT_MASK)
+ error ("Unable to catch execs prior to HPUX 10.0");
+
+#else
+ /* Enable reporting of exec events from the kernel. */
+ /* ??rehrauer: For the moment, we're always enabling these events,
+ and just ignoring them if there's no catchpoint to catch them. */
+ return 0;
+#endif
+}
+
+int
+child_remove_exec_catchpoint (int pid)
+{
+ /* This request is only available on HPUX 10.0 and later. */
+#if !defined(PT_SET_EVENT_MASK)
+ error ("Unable to catch execs prior to HPUX 10.0");
+
+#else
+ /* Disable reporting of exec events from the kernel. */
+ /* ??rehrauer: For the moment, we're always enabling these events,
+ and just ignoring them if there's no catchpoint to catch them. */
+ return 0;
+#endif
+}
+
+int
+child_has_execd (int pid, char **execd_pathname)
+{
+ /* This request is only available on HPUX 10.0 and later. */
+#if !defined(PT_GET_PROCESS_STATE)
+ *execd_pathname = NULL;
+ return 0;
+
+#else
+ int pt_status;
+ ptrace_state_t ptrace_state;
+
+ errno = 0;
+ pt_status = call_ptrace (PT_GET_PROCESS_STATE,
+ pid,
+ (PTRACE_ARG3_TYPE) & ptrace_state,
+ sizeof (ptrace_state));
+ if (errno)
+ perror_with_name ("ptrace");
+ if (pt_status < 0)
+ return 0;
+
+ if (ptrace_state.pe_report_event & PTRACE_EXEC)
+ {
+ char *exec_file = target_pid_to_exec_file (pid);
+ *execd_pathname = savestring (exec_file, strlen (exec_file));
+ return 1;
+ }
+
+ return 0;
+#endif
+}
+
+int
+child_reported_exec_events_per_exec_call (void)
+{
+ return 2; /* ptrace reports the event twice per call. */
+}
+
+int
+child_has_syscall_event (int pid, enum target_waitkind *kind, int *syscall_id)
+{
+ /* This request is only available on HPUX 10.30 and later, via
+ the ttrace interface. */
+
+ *kind = TARGET_WAITKIND_SPURIOUS;
+ *syscall_id = -1;
+ return 0;
+}
+
+char *
+child_pid_to_exec_file (int pid)
+{
+ static char exec_file_buffer[1024];
+ int pt_status;
+ CORE_ADDR top_of_stack;
+ char four_chars[4];
+ int name_index;
+ int i;
+ ptid_t saved_inferior_ptid;
+ boolean done;
+
+#ifdef PT_GET_PROCESS_PATHNAME
+ /* As of 10.x HP-UX, there's an explicit request to get the pathname. */
+ pt_status = call_ptrace (PT_GET_PROCESS_PATHNAME,
+ pid,
+ (PTRACE_ARG3_TYPE) exec_file_buffer,
+ sizeof (exec_file_buffer) - 1);
+ if (pt_status == 0)
+ return exec_file_buffer;
+#endif
+
+ /* It appears that this request is broken prior to 10.30.
+ If it fails, try a really, truly amazingly gross hack
+ that DDE uses, of pawing through the process' data
+ segment to find the pathname. */
+
+ top_of_stack = 0x7b03a000;
+ name_index = 0;
+ done = 0;
+
+ /* On the chance that pid != inferior_ptid, set inferior_ptid
+ to pid, so that (grrrr!) implicit uses of inferior_ptid get
+ the right id. */
+
+ saved_inferior_ptid = inferior_ptid;
+ inferior_ptid = pid_to_ptid (pid);
+
+ /* Try to grab a null-terminated string. */
+ while (!done)
+ {
+ if (target_read_memory (top_of_stack, four_chars, 4) != 0)
+ {
+ inferior_ptid = saved_inferior_ptid;
+ return NULL;
+ }
+ for (i = 0; i < 4; i++)
+ {
+ exec_file_buffer[name_index++] = four_chars[i];
+ done = (four_chars[i] == '\0');
+ if (done)
+ break;
+ }
+ top_of_stack += 4;
+ }
+
+ if (exec_file_buffer[0] == '\0')
+ {
+ inferior_ptid = saved_inferior_ptid;
+ return NULL;
+ }
+
+ inferior_ptid = saved_inferior_ptid;
+ return exec_file_buffer;
+}
+
+void
+pre_fork_inferior (void)
+{
+ int status;
+
+ status = pipe (startup_semaphore.parent_channel);
+ if (status < 0)
+ {
+ warning ("error getting parent pipe for startup semaphore");
+ return;
+ }
+
+ status = pipe (startup_semaphore.child_channel);
+ if (status < 0)
+ {
+ warning ("error getting child pipe for startup semaphore");
+ return;
+ }
+}
+\f
+
+/* Check to see if the given thread is alive.
+
+ This is a no-op, as ptrace doesn't support threads, so we just
+ return "TRUE". */
+
+int
+child_thread_alive (ptid_t ptid)
+{
+ return 1;
+}
+
+#endif /* ! GDB_NATIVE_HPUX_11 */