+ return 0;
+}
+
+/* Read a value of type TYPE from register REGNUM in frame FRAME, and
+ return its contents in TO. */
+
+void
+i387_register_to_value (struct frame_info *frame, int regnum,
+ struct type *type, gdb_byte *to)
+{
+ gdb_byte from[I386_MAX_REGISTER_SIZE];
+
+ gdb_assert (i386_fp_regnum_p (get_frame_arch (frame), regnum));
+
+ /* We only support floating-point values. */
+ if (TYPE_CODE (type) != TYPE_CODE_FLT)
+ {
+ warning (_("Cannot convert floating-point register value "
+ "to non-floating-point type."));
+ return;
+ }
+
+ /* Convert to TYPE. */
+ get_frame_register (frame, regnum, from);
+ convert_typed_floating (from, builtin_type_i387_ext, to, type);
+}
+
+/* Write the contents FROM of a value of type TYPE into register
+ REGNUM in frame FRAME. */
+
+void
+i387_value_to_register (struct frame_info *frame, int regnum,
+ struct type *type, const gdb_byte *from)
+{
+ gdb_byte to[I386_MAX_REGISTER_SIZE];
+
+ gdb_assert (i386_fp_regnum_p (get_frame_arch (frame), regnum));
+
+ /* We only support floating-point values. */
+ if (TYPE_CODE (type) != TYPE_CODE_FLT)
+ {
+ warning (_("Cannot convert non-floating-point type "
+ "to floating-point register value."));
+ return;
+ }
+
+ /* Convert from TYPE. */
+ convert_typed_floating (from, type, to, builtin_type_i387_ext);
+ put_frame_register (frame, regnum, to);
+}
+\f
+
+/* Handle FSAVE and FXSAVE formats. */
+
+/* At fsave_offset[REGNUM] you'll find the offset to the location in
+ the data structure used by the "fsave" instruction where GDB
+ register REGNUM is stored. */
+
+static int fsave_offset[] =
+{
+ 28 + 0 * 10, /* %st(0) ... */
+ 28 + 1 * 10,
+ 28 + 2 * 10,
+ 28 + 3 * 10,
+ 28 + 4 * 10,
+ 28 + 5 * 10,
+ 28 + 6 * 10,
+ 28 + 7 * 10, /* ... %st(7). */
+ 0, /* `fctrl' (16 bits). */
+ 4, /* `fstat' (16 bits). */
+ 8, /* `ftag' (16 bits). */
+ 16, /* `fiseg' (16 bits). */
+ 12, /* `fioff'. */
+ 24, /* `foseg' (16 bits). */
+ 20, /* `fooff'. */
+ 18 /* `fop' (bottom 11 bits). */
+};
+
+#define FSAVE_ADDR(tdep, fsave, regnum) \
+ (fsave + fsave_offset[regnum - I387_ST0_REGNUM (tdep)])
+\f
+
+/* Fill register REGNUM in REGCACHE with the appropriate value from
+ *FSAVE. This function masks off any of the reserved bits in
+ *FSAVE. */
+
+void
+i387_supply_fsave (struct regcache *regcache, int regnum, const void *fsave)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (get_regcache_arch (regcache));
+ const gdb_byte *regs = fsave;
+ int i;
+
+ gdb_assert (tdep->st0_regnum >= I386_ST0_REGNUM);
+
+ for (i = I387_ST0_REGNUM (tdep); i < I387_XMM0_REGNUM (tdep); i++)
+ if (regnum == -1 || regnum == i)
+ {
+ if (fsave == NULL)
+ {
+ regcache_raw_supply (regcache, i, NULL);
+ continue;
+ }
+
+ /* Most of the FPU control registers occupy only 16 bits in the
+ fsave area. Give those a special treatment. */
+ if (i >= I387_FCTRL_REGNUM (tdep)
+ && i != I387_FIOFF_REGNUM (tdep) && i != I387_FOOFF_REGNUM (tdep))
+ {
+ gdb_byte val[4];
+
+ memcpy (val, FSAVE_ADDR (tdep, regs, i), 2);
+ val[2] = val[3] = 0;
+ if (i == I387_FOP_REGNUM (tdep))
+ val[1] &= ((1 << 3) - 1);
+ regcache_raw_supply (regcache, i, val);
+ }
+ else
+ regcache_raw_supply (regcache, i, FSAVE_ADDR (tdep, regs, i));
+ }
+
+ /* Provide dummy values for the SSE registers. */
+ for (i = I387_XMM0_REGNUM (tdep); i < I387_MXCSR_REGNUM (tdep); i++)
+ if (regnum == -1 || regnum == i)
+ regcache_raw_supply (regcache, i, NULL);
+ if (regnum == -1 || regnum == I387_MXCSR_REGNUM (tdep))
+ {
+ gdb_byte buf[4];
+
+ store_unsigned_integer (buf, 4, 0x1f80);
+ regcache_raw_supply (regcache, I387_MXCSR_REGNUM (tdep), buf);
+ }
+}
+
+/* Fill register REGNUM (if it is a floating-point register) in *FSAVE
+ with the value from REGCACHE. If REGNUM is -1, do this for all
+ registers. This function doesn't touch any of the reserved bits in
+ *FSAVE. */
+
+void
+i387_collect_fsave (const struct regcache *regcache, int regnum, void *fsave)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (get_regcache_arch (regcache));
+ gdb_byte *regs = fsave;
+ int i;
+
+ gdb_assert (tdep->st0_regnum >= I386_ST0_REGNUM);
+
+ for (i = I387_ST0_REGNUM (tdep); i < I387_XMM0_REGNUM (tdep); i++)
+ if (regnum == -1 || regnum == i)
+ {
+ /* Most of the FPU control registers occupy only 16 bits in
+ the fsave area. Give those a special treatment. */
+ if (i >= I387_FCTRL_REGNUM (tdep)
+ && i != I387_FIOFF_REGNUM (tdep) && i != I387_FOOFF_REGNUM (tdep))
+ {
+ gdb_byte buf[4];
+
+ regcache_raw_collect (regcache, i, buf);
+
+ if (i == I387_FOP_REGNUM (tdep))
+ {
+ /* The opcode occupies only 11 bits. Make sure we
+ don't touch the other bits. */
+ buf[1] &= ((1 << 3) - 1);
+ buf[1] |= ((FSAVE_ADDR (tdep, regs, i))[1] & ~((1 << 3) - 1));
+ }
+ memcpy (FSAVE_ADDR (tdep, regs, i), buf, 2);
+ }
+ else
+ regcache_raw_collect (regcache, i, FSAVE_ADDR (tdep, regs, i));
+ }
+}
+\f
+
+/* At fxsave_offset[REGNUM] you'll find the offset to the location in
+ the data structure used by the "fxsave" instruction where GDB
+ register REGNUM is stored. */
+
+static int fxsave_offset[] =
+{
+ 32, /* %st(0) through ... */
+ 48,
+ 64,
+ 80,
+ 96,
+ 112,
+ 128,
+ 144, /* ... %st(7) (80 bits each). */
+ 0, /* `fctrl' (16 bits). */
+ 2, /* `fstat' (16 bits). */
+ 4, /* `ftag' (16 bits). */
+ 12, /* `fiseg' (16 bits). */
+ 8, /* `fioff'. */
+ 20, /* `foseg' (16 bits). */
+ 16, /* `fooff'. */
+ 6, /* `fop' (bottom 11 bits). */
+ 160 + 0 * 16, /* %xmm0 through ... */
+ 160 + 1 * 16,
+ 160 + 2 * 16,
+ 160 + 3 * 16,
+ 160 + 4 * 16,
+ 160 + 5 * 16,
+ 160 + 6 * 16,
+ 160 + 7 * 16,
+ 160 + 8 * 16,
+ 160 + 9 * 16,
+ 160 + 10 * 16,
+ 160 + 11 * 16,
+ 160 + 12 * 16,
+ 160 + 13 * 16,
+ 160 + 14 * 16,
+ 160 + 15 * 16, /* ... %xmm15 (128 bits each). */
+};
+
+#define FXSAVE_ADDR(tdep, fxsave, regnum) \
+ (fxsave + fxsave_offset[regnum - I387_ST0_REGNUM (tdep)])
+
+/* We made an unfortunate choice in putting %mxcsr after the SSE
+ registers %xmm0-%xmm7 instead of before, since it makes supporting
+ the registers %xmm8-%xmm15 on AMD64 a bit involved. Therefore we
+ don't include the offset for %mxcsr here above. */
+
+#define FXSAVE_MXCSR_ADDR(fxsave) (fxsave + 24)
+
+static int i387_tag (const gdb_byte *raw);
+\f
+
+/* Fill register REGNUM in REGCACHE with the appropriate
+ floating-point or SSE register value from *FXSAVE. This function
+ masks off any of the reserved bits in *FXSAVE. */
+
+void
+i387_supply_fxsave (struct regcache *regcache, int regnum, const void *fxsave)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (get_regcache_arch (regcache));
+ const gdb_byte *regs = fxsave;
+ int i;
+
+ gdb_assert (tdep->st0_regnum >= I386_ST0_REGNUM);
+ gdb_assert (tdep->num_xmm_regs > 0);
+
+ for (i = I387_ST0_REGNUM (tdep); i < I387_MXCSR_REGNUM (tdep); i++)
+ if (regnum == -1 || regnum == i)
+ {
+ if (regs == NULL)
+ {
+ regcache_raw_supply (regcache, i, NULL);
+ continue;
+ }
+
+ /* Most of the FPU control registers occupy only 16 bits in
+ the fxsave area. Give those a special treatment. */
+ if (i >= I387_FCTRL_REGNUM (tdep) && i < I387_XMM0_REGNUM (tdep)
+ && i != I387_FIOFF_REGNUM (tdep) && i != I387_FOOFF_REGNUM (tdep))
+ {
+ gdb_byte val[4];
+
+ memcpy (val, FXSAVE_ADDR (tdep, regs, i), 2);
+ val[2] = val[3] = 0;
+ if (i == I387_FOP_REGNUM (tdep))
+ val[1] &= ((1 << 3) - 1);
+ else if (i== I387_FTAG_REGNUM (tdep))
+ {
+ /* The fxsave area contains a simplified version of
+ the tag word. We have to look at the actual 80-bit
+ FP data to recreate the traditional i387 tag word. */
+
+ unsigned long ftag = 0;
+ int fpreg;
+ int top;
+
+ top = ((FXSAVE_ADDR (tdep, regs,
+ I387_FSTAT_REGNUM (tdep)))[1] >> 3);
+ top &= 0x7;
+
+ for (fpreg = 7; fpreg >= 0; fpreg--)
+ {
+ int tag;
+
+ if (val[0] & (1 << fpreg))
+ {
+ int regnum = (fpreg + 8 - top) % 8
+ + I387_ST0_REGNUM (tdep);
+ tag = i387_tag (FXSAVE_ADDR (tdep, regs, regnum));
+ }
+ else
+ tag = 3; /* Empty */
+
+ ftag |= tag << (2 * fpreg);
+ }
+ val[0] = ftag & 0xff;
+ val[1] = (ftag >> 8) & 0xff;
+ }
+ regcache_raw_supply (regcache, i, val);
+ }
+ else
+ regcache_raw_supply (regcache, i, FXSAVE_ADDR (tdep, regs, i));
+ }
+
+ if (regnum == I387_MXCSR_REGNUM (tdep) || regnum == -1)
+ {
+ if (regs == NULL)
+ regcache_raw_supply (regcache, I387_MXCSR_REGNUM (tdep), NULL);
+ else
+ regcache_raw_supply (regcache, I387_MXCSR_REGNUM (tdep),
+ FXSAVE_MXCSR_ADDR (regs));
+ }
+}
+
+/* Fill register REGNUM (if it is a floating-point or SSE register) in
+ *FXSAVE with the value from REGCACHE. If REGNUM is -1, do this for
+ all registers. This function doesn't touch any of the reserved
+ bits in *FXSAVE. */
+
+void
+i387_collect_fxsave (const struct regcache *regcache, int regnum, void *fxsave)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (get_regcache_arch (regcache));
+ gdb_byte *regs = fxsave;
+ int i;
+
+ gdb_assert (tdep->st0_regnum >= I386_ST0_REGNUM);
+ gdb_assert (tdep->num_xmm_regs > 0);
+
+ for (i = I387_ST0_REGNUM (tdep); i < I387_MXCSR_REGNUM (tdep); i++)
+ if (regnum == -1 || regnum == i)
+ {
+ /* Most of the FPU control registers occupy only 16 bits in
+ the fxsave area. Give those a special treatment. */
+ if (i >= I387_FCTRL_REGNUM (tdep) && i < I387_XMM0_REGNUM (tdep)
+ && i != I387_FIOFF_REGNUM (tdep) && i != I387_FOOFF_REGNUM (tdep))
+ {
+ gdb_byte buf[4];
+
+ regcache_raw_collect (regcache, i, buf);
+
+ if (i == I387_FOP_REGNUM (tdep))
+ {
+ /* The opcode occupies only 11 bits. Make sure we
+ don't touch the other bits. */
+ buf[1] &= ((1 << 3) - 1);
+ buf[1] |= ((FXSAVE_ADDR (tdep, regs, i))[1] & ~((1 << 3) - 1));
+ }
+ else if (i == I387_FTAG_REGNUM (tdep))
+ {
+ /* Converting back is much easier. */
+
+ unsigned short ftag;
+ int fpreg;
+
+ ftag = (buf[1] << 8) | buf[0];
+ buf[0] = 0;
+ buf[1] = 0;
+
+ for (fpreg = 7; fpreg >= 0; fpreg--)
+ {
+ int tag = (ftag >> (fpreg * 2)) & 3;
+
+ if (tag != 3)
+ buf[0] |= (1 << fpreg);
+ }
+ }
+ memcpy (FXSAVE_ADDR (tdep, regs, i), buf, 2);
+ }
+ else
+ regcache_raw_collect (regcache, i, FXSAVE_ADDR (tdep, regs, i));
+ }
+
+ if (regnum == I387_MXCSR_REGNUM (tdep) || regnum == -1)
+ regcache_raw_collect (regcache, I387_MXCSR_REGNUM (tdep),
+ FXSAVE_MXCSR_ADDR (regs));
+}
+
+/* Recreate the FTW (tag word) valid bits from the 80-bit FP data in
+ *RAW. */
+
+static int
+i387_tag (const gdb_byte *raw)
+{
+ int integer;
+ unsigned int exponent;
+ unsigned long fraction[2];
+
+ integer = raw[7] & 0x80;
+ exponent = (((raw[9] & 0x7f) << 8) | raw[8]);
+ fraction[0] = ((raw[3] << 24) | (raw[2] << 16) | (raw[1] << 8) | raw[0]);
+ fraction[1] = (((raw[7] & 0x7f) << 24) | (raw[6] << 16)
+ | (raw[5] << 8) | raw[4]);
+
+ if (exponent == 0x7fff)
+ {
+ /* Special. */
+ return (2);
+ }
+ else if (exponent == 0x0000)
+ {
+ if (fraction[0] == 0x0000 && fraction[1] == 0x0000 && !integer)
+ {
+ /* Zero. */
+ return (1);
+ }
+ else
+ {
+ /* Special. */
+ return (2);
+ }
+ }
+ else
+ {
+ if (integer)
+ {
+ /* Valid. */
+ return (0);
+ }
+ else
+ {
+ /* Special. */
+ return (2);
+ }
+ }
+}
+
+/* Prepare the FPU stack in REGCACHE for a function return. */
+
+void
+i387_return_value (struct gdbarch *gdbarch, struct regcache *regcache)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+ ULONGEST fstat;
+
+ /* Set the top of the floating-point register stack to 7. The
+ actual value doesn't really matter, but 7 is what a normal
+ function return would end up with if the program started out with
+ a freshly initialized FPU. */
+ regcache_raw_read_unsigned (regcache, I387_FSTAT_REGNUM (tdep), &fstat);
+ fstat |= (7 << 11);
+ regcache_raw_write_unsigned (regcache, I387_FSTAT_REGNUM (tdep), fstat);
+
+ /* Mark %st(1) through %st(7) as empty. Since we set the top of the
+ floating-point register stack to 7, the appropriate value for the
+ tag word is 0x3fff. */
+ regcache_raw_write_unsigned (regcache, I387_FTAG_REGNUM (tdep), 0x3fff);
+