-}
-\f
-/* Read one line from the command input stream `instream'
- into the local static buffer `linebuffer' (whose current length
- is `linelength').
- The buffer is made bigger as necessary.
- Returns the address of the start of the line.
-
- NULL is returned for end of file.
-
- *If* the instream == stdin & stdin is a terminal, the line read
- is copied into the file line saver (global var char *line,
- length linesize) so that it can be duplicated.
-
- This routine either uses fancy command line editing or
- simple input as the user has requested. */
-
-char *
-command_line_input (prrompt, repeat, annotation_suffix)
- char *prrompt;
- int repeat;
- char *annotation_suffix;
-{
- static char *linebuffer = 0;
- static unsigned linelength = 0;
- register char *p;
- char *p1;
- char *rl;
- char *local_prompt = prrompt;
- register int c;
- char *nline;
- char got_eof = 0;
-
- if (annotation_level > 1 && instream == stdin)
- {
- local_prompt = alloca ((prrompt == NULL ? 0 : strlen (prrompt))
- + strlen (annotation_suffix) + 40);
- if (prrompt == NULL)
- local_prompt[0] = '\0';
- else
- strcpy (local_prompt, prrompt);
- strcat (local_prompt, "\n\032\032");
- strcat (local_prompt, annotation_suffix);
- strcat (local_prompt, "\n");
- }
-
- if (linebuffer == 0)
- {
- linelength = 80;
- linebuffer = (char *) xmalloc (linelength);
- }
-
- p = linebuffer;
-
- /* Control-C quits instantly if typed while in this loop
- since it should not wait until the user types a newline. */
- immediate_quit++;
-#ifdef STOP_SIGNAL
- if (job_control)
- signal (STOP_SIGNAL, stop_sig);
-#endif
-
- while (1)
- {
- /* Make sure that all output has been output. Some machines may let
- you get away with leaving out some of the gdb_flush, but not all. */
- wrap_here ("");
- gdb_flush (gdb_stdout);
- gdb_flush (gdb_stderr);
-
- if (source_file_name != NULL)
- {
- ++source_line_number;
- sprintf (source_error,
- "%s%s:%d: Error in sourced command file:\n",
- source_pre_error,
- source_file_name,
- source_line_number);
- error_pre_print = source_error;
- }
-
- if (annotation_level > 1 && instream == stdin)
- {
- printf_unfiltered ("\n\032\032pre-");
- printf_unfiltered (annotation_suffix);
- printf_unfiltered ("\n");
- }
-
- /* Don't use fancy stuff if not talking to stdin. */
- if (command_editing_p && instream == stdin
- && ISATTY (instream))
- rl = readline (local_prompt);
- else
- rl = gdb_readline (local_prompt);
-
- if (annotation_level > 1 && instream == stdin)
- {
- printf_unfiltered ("\n\032\032post-");
- printf_unfiltered (annotation_suffix);
- printf_unfiltered ("\n");
- }
-
- if (!rl || rl == (char *) EOF)
- {
- got_eof = 1;
- break;
- }
- if (strlen(rl) + 1 + (p - linebuffer) > linelength)
- {
- linelength = strlen(rl) + 1 + (p - linebuffer);
- nline = (char *) xrealloc (linebuffer, linelength);
- p += nline - linebuffer;
- linebuffer = nline;
- }
- p1 = rl;
- /* Copy line. Don't copy null at end. (Leaves line alone
- if this was just a newline) */
- while (*p1)
- *p++ = *p1++;
-
- free (rl); /* Allocated in readline. */
-
- if (p == linebuffer || *(p - 1) != '\\')
- break;
-
- p--; /* Put on top of '\'. */
- local_prompt = (char *) 0;
- }
-
-#ifdef STOP_SIGNAL
- if (job_control)
- signal (STOP_SIGNAL, SIG_DFL);
-#endif
- immediate_quit--;
-
- if (got_eof)
- return NULL;
-
-#define SERVER_COMMAND_LENGTH 7
- server_command =
- (p - linebuffer > SERVER_COMMAND_LENGTH)
- && STREQN (linebuffer, "server ", SERVER_COMMAND_LENGTH);
- if (server_command)
- {
- /* Note that we don't set `line'. Between this and the check in
- dont_repeat, this insures that repeating will still do the
- right thing. */
- *p = '\0';
- return linebuffer + SERVER_COMMAND_LENGTH;
- }
-
- /* Do history expansion if that is wished. */
- if (history_expansion_p && instream == stdin
- && ISATTY (instream))
- {
- char *history_value;
- int expanded;
-
- *p = '\0'; /* Insert null now. */
- expanded = history_expand (linebuffer, &history_value);
- if (expanded)
- {
- /* Print the changes. */
- printf_unfiltered ("%s\n", history_value);
-
- /* If there was an error, call this function again. */
- if (expanded < 0)
- {
- free (history_value);
- return command_line_input (prrompt, repeat, annotation_suffix);
- }
- if (strlen (history_value) > linelength)
- {
- linelength = strlen (history_value) + 1;
- linebuffer = (char *) xrealloc (linebuffer, linelength);
- }
- strcpy (linebuffer, history_value);
- p = linebuffer + strlen(linebuffer);
- free (history_value);
- }
- }
-
- /* If we just got an empty line, and that is supposed
- to repeat the previous command, return the value in the
- global buffer. */
- if (repeat)
- {
- if (p == linebuffer)
- return line;
- p1 = linebuffer;
- while (*p1 == ' ' || *p1 == '\t')
- p1++;
- if (!*p1)
- return line;
- }
-
- *p = 0;
-
- /* Add line to history if appropriate. */
- if (instream == stdin
- && ISATTY (stdin) && *linebuffer)
- add_history (linebuffer);
-
- /* Note: lines consisting solely of comments are added to the command
- history. This is useful when you type a command, and then
- realize you don't want to execute it quite yet. You can comment
- out the command and then later fetch it from the value history
- and remove the '#'. The kill ring is probably better, but some
- people are in the habit of commenting things out. */
- p1 = linebuffer;
- while ((c = *p1++) != '\0')
- {
- if (c == '"')
- while ((c = *p1++) != '"')
- {
- /* Make sure an escaped '"' doesn't make us think the string
- is ended. */
- if (c == '\\')
- parse_escape (&p1);
- if (c == '\0')
- break;
- }
- else if (c == '\'')
- while ((c = *p1++) != '\'')
- {
- /* Make sure an escaped '\'' doesn't make us think the string
- is ended. */
- if (c == '\\')
- parse_escape (&p1);
- if (c == '\0')
- break;
- }
- else if (c == '#')
- {
- /* Found a comment. */
- p1[-1] = '\0';
- break;
- }
- }
-
- /* Save into global buffer if appropriate. */
- if (repeat)
- {
- if (linelength > linesize)
- {
- line = xrealloc (line, linelength);
- linesize = linelength;
- }
- strcpy (line, linebuffer);
- return line;
- }
-
- return linebuffer;
-}
-\f
-/* Read lines from the input stream
- and accumulate them in a chain of struct command_line's
- which is then returned. */
-
-struct command_line *
-read_command_lines ()
-{
- struct command_line *first = 0;
- register struct command_line *next, *tail = 0;
- register char *p, *p1;
- struct cleanup *old_chain = 0;
-
- while (1)
- {
- dont_repeat ();
- p = command_line_input ((char *) NULL, instream == stdin, "commands");
- if (p == NULL)
- /* Treat end of file like "end". */
- break;
-
- /* Remove leading and trailing blanks. */
- while (*p == ' ' || *p == '\t') p++;
- p1 = p + strlen (p);
- while (p1 != p && (p1[-1] == ' ' || p1[-1] == '\t')) p1--;
-
- /* Is this "end"? */
- if (p1 - p == 3 && !strncmp (p, "end", 3))
- break;
-
- /* No => add this line to the chain of command lines. */
- next = (struct command_line *) xmalloc (sizeof (struct command_line));
- next->line = savestring (p, p1 - p);
- next->next = 0;
- if (tail)
- {
- tail->next = next;
- }
- else
- {
- /* We just read the first line.
- From now on, arrange to throw away the lines we have
- if we quit or get an error while inside this function. */
- first = next;
- old_chain = make_cleanup (free_command_lines, &first);
- }
- tail = next;
- }
-
- dont_repeat ();
-
- /* Now we are about to return the chain to our caller,
- so freeing it becomes his responsibility. */
- if (first)
- discard_cleanups (old_chain);
- return first;
-}
-
-/* Free a chain of struct command_line's. */
-
-void
-free_command_lines (lptr)
- struct command_line **lptr;
-{
- register struct command_line *l = *lptr;
- register struct command_line *next;
-
- while (l)
- {
- next = l->next;
- free (l->line);
- free ((PTR)l);
- l = next;
- }
-}
-\f
-/* Add an element to the list of info subcommands. */
-
-void
-add_info (name, fun, doc)
- char *name;
- void (*fun) PARAMS ((char *, int));
- char *doc;
-{
- add_cmd (name, no_class, fun, doc, &infolist);
-}
-
-/* Add an alias to the list of info subcommands. */
-
-void
-add_info_alias (name, oldname, abbrev_flag)
- char *name;
- char *oldname;
- int abbrev_flag;
-{
- add_alias_cmd (name, oldname, 0, abbrev_flag, &infolist);
-}
-
-/* The "info" command is defined as a prefix, with allow_unknown = 0.
- Therefore, its own definition is called only for "info" with no args. */
-
-/* ARGSUSED */
-static void
-info_command (arg, from_tty)
- char *arg;
- int from_tty;
-{
- printf_unfiltered ("\"info\" must be followed by the name of an info command.\n");
- help_list (infolist, "info ", -1, gdb_stdout);
-}
-
-/* The "complete" command is used by Emacs to implement completion. */
-
-/* ARGSUSED */
-static void
-complete_command (arg, from_tty)
- char *arg;
- int from_tty;
-{
- int i;
- char *completion;
-
- dont_repeat ();
-
- if (arg == NULL)
- {
- rl_line_buffer[0] = '\0';
- rl_point = 0;
- }
- else
- {
- strcpy (rl_line_buffer, arg);
- rl_point = strlen (arg);
- }
-
- for (completion = symbol_completion_function (rl_line_buffer, i = 0);
- completion;
- completion = symbol_completion_function (rl_line_buffer, ++i))
- printf_unfiltered ("%s\n", completion);
-}
-
-/* The "show" command with no arguments shows all the settings. */
-
-/* ARGSUSED */
-static void
-show_command (arg, from_tty)
- char *arg;
- int from_tty;
-{
- cmd_show_list (showlist, from_tty, "");
-}
-\f
-/* Add an element to the list of commands. */
-
-void
-add_com (name, class, fun, doc)
- char *name;
- enum command_class class;
- void (*fun) PARAMS ((char *, int));
- char *doc;
-{
- add_cmd (name, class, fun, doc, &cmdlist);
-}
-
-/* Add an alias or abbreviation command to the list of commands. */
-
-void
-add_com_alias (name, oldname, class, abbrev_flag)
- char *name;
- char *oldname;
- enum command_class class;
- int abbrev_flag;
-{
- add_alias_cmd (name, oldname, class, abbrev_flag, &cmdlist);
-}
-
-void
-error_no_arg (why)
- char *why;
-{
- error ("Argument required (%s).", why);
-}
-
-/* ARGSUSED */
-static void
-help_command (command, from_tty)
- char *command;
- int from_tty; /* Ignored */
-{
- help_cmd (command, gdb_stdout);
-}
-\f
-static void
-validate_comname (comname)
- char *comname;
-{
- register char *p;
-
- if (comname == 0)
- error_no_arg ("name of command to define");
-
- p = comname;
- while (*p)
- {
- if (!isalnum(*p) && *p != '-')
- error ("Junk in argument list: \"%s\"", p);
- p++;
- }
-}
-
-/* This is just a placeholder in the command data structures. */
-static void
-user_defined_command (ignore, from_tty)
- char *ignore;
- int from_tty;
-{
-}
-
-static void
-define_command (comname, from_tty)
- char *comname;
- int from_tty;
-{
- register struct command_line *cmds;
- register struct cmd_list_element *c, *newc, *hookc = 0;
- char *tem = comname;
-#define HOOK_STRING "hook-"
-#define HOOK_LEN 5
-
- validate_comname (comname);
-
- /* Look it up, and verify that we got an exact match. */
- c = lookup_cmd (&tem, cmdlist, "", -1, 1);
- if (c && !STREQ (comname, c->name))
- c = 0;
-
- if (c)
- {
- if (c->class == class_user || c->class == class_alias)
- tem = "Redefine command \"%s\"? ";
- else
- tem = "Really redefine built-in command \"%s\"? ";
- if (!query (tem, c->name))
- error ("Command \"%s\" not redefined.", c->name);
- }
-
- /* If this new command is a hook, then mark the command which it
- is hooking. Note that we allow hooking `help' commands, so that
- we can hook the `stop' pseudo-command. */
-
- if (!strncmp (comname, HOOK_STRING, HOOK_LEN))
- {
- /* Look up cmd it hooks, and verify that we got an exact match. */
- tem = comname+HOOK_LEN;
- hookc = lookup_cmd (&tem, cmdlist, "", -1, 0);
- if (hookc && !STREQ (comname+HOOK_LEN, hookc->name))
- hookc = 0;
- if (!hookc)
- {
- warning ("Your new `%s' command does not hook any existing command.",
- comname);
- if (!query ("Proceed? ", (char *)0))
- error ("Not confirmed.");
- }
- }
-
- comname = savestring (comname, strlen (comname));
-
- /* If the rest of the commands will be case insensitive, this one
- should behave in the same manner. */
- for (tem = comname; *tem; tem++)
- if (isupper(*tem)) *tem = tolower(*tem);
-
- if (from_tty)
- {
- printf_unfiltered ("Type commands for definition of \"%s\".\n\
-End with a line saying just \"end\".\n", comname);
- gdb_flush (gdb_stdout);
- }
-
- cmds = read_command_lines ();
-
- if (c && c->class == class_user)
- free_command_lines (&c->user_commands);
-
- newc = add_cmd (comname, class_user, user_defined_command,
- (c && c->class == class_user)
- ? c->doc : savestring ("User-defined.", 13), &cmdlist);
- newc->user_commands = cmds;
-
- /* If this new command is a hook, then mark both commands as being
- tied. */
- if (hookc)
- {
- hookc->hook = newc; /* Target gets hooked. */
- newc->hookee = hookc; /* We are marked as hooking target cmd. */
- }
-}
-
-static void
-document_command (comname, from_tty)
- char *comname;
- int from_tty;
-{
- struct command_line *doclines;
- register struct cmd_list_element *c;
- char *tem = comname;
-
- validate_comname (comname);
-
- c = lookup_cmd (&tem, cmdlist, "", 0, 1);
-
- if (c->class != class_user)
- error ("Command \"%s\" is built-in.", comname);
-
- if (from_tty)
- printf_unfiltered ("Type documentation for \"%s\".\n\
-End with a line saying just \"end\".\n", comname);
-
- doclines = read_command_lines ();
-
- if (c->doc) free (c->doc);
-
- {
- register struct command_line *cl1;
- register int len = 0;
-
- for (cl1 = doclines; cl1; cl1 = cl1->next)
- len += strlen (cl1->line) + 1;
-
- c->doc = (char *) xmalloc (len + 1);
- *c->doc = 0;
-
- for (cl1 = doclines; cl1; cl1 = cl1->next)
- {
- strcat (c->doc, cl1->line);
- if (cl1->next)
- strcat (c->doc, "\n");
- }
- }
-
- free_command_lines (&doclines);
-}
-\f
-static void
-print_gnu_advertisement()
-{
- printf_unfiltered ("\
-GDB is free software and you are welcome to distribute copies of it\n\
- under certain conditions; type \"show copying\" to see the conditions.\n\
-There is absolutely no warranty for GDB; type \"show warranty\" for details.\n\
-");
-}
-
-static void
-print_gdb_version (stream)
- GDB_FILE *stream;
-{
- fprintf_filtered (stream, "\
-GDB %s (%s", version, host_name);
-
- if (!STREQ (host_name, target_name))
- fprintf_filtered (stream, " --target %s", target_name);
-
- fprintf_filtered (stream, "), ");
- wrap_here("");
- fprintf_filtered (stream, "Copyright 1994 Free Software Foundation, Inc.");
-}
-
-/* ARGSUSED */
-static void
-show_version (args, from_tty)
- char *args;
- int from_tty;
-{
- immediate_quit++;
- print_gnu_advertisement ();
- print_gdb_version (gdb_stdout);
- printf_filtered ("\n");
- immediate_quit--;
-}
-\f
-/* xgdb calls this to reprint the usual GDB prompt. Obsolete now that xgdb
- is obsolete. */
-
-void
-print_prompt ()
-{
- printf_unfiltered ("%s", prompt);
- gdb_flush (gdb_stdout);
-}
-\f
-static void
-quit_command (args, from_tty)
- char *args;
- int from_tty;
-{
- if (inferior_pid != 0 && target_has_execution)
- {
- if (attach_flag)
- {
- if (query ("The program is running. Quit anyway (and detach it)? "))
- target_detach (args, from_tty);
- else
- error ("Not confirmed.");
- }
- else
- {
- if (query ("The program is running. Quit anyway (and kill it)? "))
- target_kill ();
- else
- error ("Not confirmed.");
- }
- }
- /* UDI wants this, to kill the TIP. */
- target_close (1);
-
- /* Save the history information if it is appropriate to do so. */
- if (write_history_p && history_filename)
- write_history (history_filename);
-
- exit (0);
-}
-
-/* Returns whether GDB is running on a terminal and whether the user
- desires that questions be asked of them on that terminal. */
-
-int
-input_from_terminal_p ()
-{
- return gdb_has_a_terminal () && (instream == stdin) & caution;
-}
-\f
-/* ARGSUSED */
-static void
-pwd_command (args, from_tty)
- char *args;
- int from_tty;
-{
- if (args) error ("The \"pwd\" command does not take an argument: %s", args);
- getcwd (dirbuf, sizeof (dirbuf));
-
- if (!STREQ (dirbuf, current_directory))
- printf_unfiltered ("Working directory %s\n (canonically %s).\n",
- current_directory, dirbuf);
- else
- printf_unfiltered ("Working directory %s.\n", current_directory);
-}
-
-static void
-cd_command (dir, from_tty)
- char *dir;
- int from_tty;
-{
- int len;
- /* Found something other than leading repetitions of "/..". */
- int found_real_path;
- char *p;
-
- /* If the new directory is absolute, repeat is a no-op; if relative,
- repeat might be useful but is more likely to be a mistake. */
- dont_repeat ();
-
- if (dir == 0)
- error_no_arg ("new working directory");
-
- dir = tilde_expand (dir);
- make_cleanup (free, dir);
-
- if (chdir (dir) < 0)
- perror_with_name (dir);
-
- len = strlen (dir);
- dir = savestring (dir, len - (len > 1 && dir[len-1] == '/'));
- if (dir[0] == '/')
- current_directory = dir;
- else
- {
- if (current_directory[0] == '/' && current_directory[1] == '\0')
- current_directory = concat (current_directory, dir, NULL);
- else
- current_directory = concat (current_directory, "/", dir, NULL);
- free (dir);
- }
-
- /* Now simplify any occurrences of `.' and `..' in the pathname. */
-
- found_real_path = 0;
- for (p = current_directory; *p;)
- {
- if (p[0] == '/' && p[1] == '.' && (p[2] == 0 || p[2] == '/'))
- strcpy (p, p + 2);
- else if (p[0] == '/' && p[1] == '.' && p[2] == '.'
- && (p[3] == 0 || p[3] == '/'))
- {
- if (found_real_path)
- {
- /* Search backwards for the directory just before the "/.."
- and obliterate it and the "/..". */
- char *q = p;
- while (q != current_directory && q[-1] != '/')
- --q;
-
- if (q == current_directory)
- /* current_directory is
- a relative pathname ("can't happen"--leave it alone). */
- ++p;
- else
- {
- strcpy (q - 1, p + 3);
- p = q - 1;
- }
- }
- else
- /* We are dealing with leading repetitions of "/..", for example
- "/../..", which is the Mach super-root. */
- p += 3;
- }
- else
- {
- found_real_path = 1;
- ++p;
- }
- }
-
- forget_cached_source_info ();
-
- if (from_tty)
- pwd_command ((char *) 0, 1);
-}
-\f
-struct source_cleanup_lines_args {
- int old_line;
- char *old_file;
- char *old_pre_error;
- char *old_error_pre_print;
-};
-
-static void
-source_cleanup_lines (args)
- PTR args;
-{
- struct source_cleanup_lines_args *p =
- (struct source_cleanup_lines_args *)args;
- source_line_number = p->old_line;
- source_file_name = p->old_file;
- source_pre_error = p->old_pre_error;
- error_pre_print = p->old_error_pre_print;
-}
-
-/* ARGSUSED */
-static void
-source_command (args, from_tty)
- char *args;
- int from_tty;
-{
- FILE *stream;
- struct cleanup *old_cleanups;
- char *file = args;
- struct source_cleanup_lines_args old_lines;
- int needed_length;
-
- if (file == NULL)
- {
- error ("source command requires pathname of file to source.");
- }
-
- file = tilde_expand (file);
- old_cleanups = make_cleanup (free, file);
-
- stream = fopen (file, FOPEN_RT);
- if (stream == 0)
- perror_with_name (file);
-
- make_cleanup (fclose, stream);
-
- old_lines.old_line = source_line_number;
- old_lines.old_file = source_file_name;
- old_lines.old_pre_error = source_pre_error;
- old_lines.old_error_pre_print = error_pre_print;
- make_cleanup (source_cleanup_lines, &old_lines);
- source_line_number = 0;
- source_file_name = file;
- source_pre_error = error_pre_print == NULL ? "" : error_pre_print;
- source_pre_error = savestring (source_pre_error, strlen (source_pre_error));
- make_cleanup (free, source_pre_error);
- /* This will get set every time we read a line. So it won't stay "" for
- long. */
- error_pre_print = "";
-
- needed_length = strlen (source_file_name) + strlen (source_pre_error) + 80;
- if (source_error_allocated < needed_length)
- {
- source_error_allocated *= 2;
- if (source_error_allocated < needed_length)
- source_error_allocated = needed_length;
- if (source_error == NULL)
- source_error = xmalloc (source_error_allocated);
- else
- source_error = xrealloc (source_error, source_error_allocated);
- }
-
- read_command_file (stream);
-
- do_cleanups (old_cleanups);
-}
-
-/* ARGSUSED */
-static void
-echo_command (text, from_tty)
- char *text;
- int from_tty;
-{
- char *p = text;
- register int c;
-
- if (text)
- while ((c = *p++) != '\0')
- {
- if (c == '\\')
- {
- /* \ at end of argument is used after spaces
- so they won't be lost. */
- if (*p == 0)
- return;
-
- c = parse_escape (&p);
- if (c >= 0)
- printf_filtered ("%c", c);
- }
- else
- printf_filtered ("%c", c);
- }
-
- /* Force this output to appear now. */
- wrap_here ("");
- gdb_flush (gdb_stdout);
-}
-
-\f
-/* Functions to manipulate command line editing control variables. */
-
-/* Number of commands to print in each call to show_commands. */
-#define Hist_print 10
-static void
-show_commands (args, from_tty)
- char *args;
- int from_tty;
-{
- /* Index for history commands. Relative to history_base. */
- int offset;
-
- /* Number of the history entry which we are planning to display next.
- Relative to history_base. */
- static int num = 0;
-
- /* The first command in the history which doesn't exist (i.e. one more
- than the number of the last command). Relative to history_base. */
- int hist_len;
-
- extern HIST_ENTRY *history_get PARAMS ((int));
-
- /* Print out some of the commands from the command history. */
- /* First determine the length of the history list. */
- hist_len = history_size;
- for (offset = 0; offset < history_size; offset++)
- {
- if (!history_get (history_base + offset))
- {
- hist_len = offset;
- break;
- }
- }
-
- if (args)
- {
- if (args[0] == '+' && args[1] == '\0')
- /* "info editing +" should print from the stored position. */
- ;
- else
- /* "info editing <exp>" should print around command number <exp>. */
- num = (parse_and_eval_address (args) - history_base) - Hist_print / 2;
- }
- /* "show commands" means print the last Hist_print commands. */
- else
- {
- num = hist_len - Hist_print;
- }
-
- if (num < 0)
- num = 0;
-
- /* If there are at least Hist_print commands, we want to display the last
- Hist_print rather than, say, the last 6. */
- if (hist_len - num < Hist_print)
- {
- num = hist_len - Hist_print;
- if (num < 0)
- num = 0;
- }
-
- for (offset = num; offset < num + Hist_print && offset < hist_len; offset++)
- {
- printf_filtered ("%5d %s\n", history_base + offset,
- (history_get (history_base + offset))->line);
- }
-
- /* The next command we want to display is the next one that we haven't
- displayed yet. */
- num += Hist_print;
-
- /* If the user repeats this command with return, it should do what
- "show commands +" does. This is unnecessary if arg is null,
- because "show commands +" is not useful after "show commands". */
- if (from_tty && args)
- {
- args[0] = '+';
- args[1] = '\0';
- }
-}
-
-/* Called by do_setshow_command. */
-/* ARGSUSED */
-static void
-set_history_size_command (args, from_tty, c)
- char *args;
- int from_tty;
- struct cmd_list_element *c;
-{
- if (history_size == INT_MAX)
- unstifle_history ();
- else if (history_size >= 0)
- stifle_history (history_size);
- else
- {
- history_size = INT_MAX;
- error ("History size must be non-negative");
- }
-}
-
-/* ARGSUSED */
-static void
-set_history (args, from_tty)
- char *args;
- int from_tty;
-{
- printf_unfiltered ("\"set history\" must be followed by the name of a history subcommand.\n");
- help_list (sethistlist, "set history ", -1, gdb_stdout);
-}
-
-/* ARGSUSED */
-static void
-show_history (args, from_tty)
- char *args;
- int from_tty;
-{
- cmd_show_list (showhistlist, from_tty, "");
-}
-
-int info_verbose = 0; /* Default verbose msgs off */
-
-/* Called by do_setshow_command. An elaborate joke. */
-/* ARGSUSED */
-static void
-set_verbose (args, from_tty, c)
- char *args;
- int from_tty;
- struct cmd_list_element *c;
-{
- char *cmdname = "verbose";
- struct cmd_list_element *showcmd;
-
- showcmd = lookup_cmd_1 (&cmdname, showlist, NULL, 1);
-
- if (info_verbose)
- {
- c->doc = "Set verbose printing of informational messages.";
- showcmd->doc = "Show verbose printing of informational messages.";
- }
- else
- {
- c->doc = "Set verbosity.";
- showcmd->doc = "Show verbosity.";
- }
-}
-
-static void
-float_handler (signo)
-int signo;
-{
- /* This message is based on ANSI C, section 4.7. Note that integer
- divide by zero causes this, so "float" is a misnomer. */
- signal (SIGFPE, float_handler);
- error ("Erroneous arithmetic operation.");
-}
-
-/* Return whether we are running a batch file or from terminal. */
-int
-batch_mode ()
-{
- return !(instream == stdin && ISATTY (stdin));
-}
-
-\f
-static void
-init_cmd_lists ()
-{
- cmdlist = NULL;
- infolist = NULL;
- enablelist = NULL;
- disablelist = NULL;
- deletelist = NULL;
- enablebreaklist = NULL;
- setlist = NULL;
- unsetlist = NULL;
- showlist = NULL;
- sethistlist = NULL;
- showhistlist = NULL;
- unsethistlist = NULL;
-#if MAINTENANCE_CMDS
- maintenancelist = NULL;
- maintenanceinfolist = NULL;
- maintenanceprintlist = NULL;
-#endif
- setprintlist = NULL;
- showprintlist = NULL;
- setchecklist = NULL;
- showchecklist = NULL;
-}
-
-/* Init the history buffer. Note that we are called after the init file(s)
- * have been read so that the user can change the history file via his
- * .gdbinit file (for instance). The GDBHISTFILE environment variable
- * overrides all of this.
- */
-
-static void
-init_history()
-{
- char *tmpenv;
-
- tmpenv = getenv ("HISTSIZE");
- if (tmpenv)
- history_size = atoi (tmpenv);
- else if (!history_size)
- history_size = 256;
-
- stifle_history (history_size);
-
- tmpenv = getenv ("GDBHISTFILE");
- if (tmpenv)
- history_filename = savestring (tmpenv, strlen(tmpenv));
- else if (!history_filename) {
- /* We include the current directory so that if the user changes
- directories the file written will be the same as the one
- that was read. */
- history_filename = concat (current_directory, "/.gdb_history", NULL);
- }
- read_history (history_filename);
-}
-
-static void
-init_main ()
-{
- struct cmd_list_element *c;
-
-#ifdef DEFAULT_PROMPT
- prompt = savestring (DEFAULT_PROMPT, strlen(DEFAULT_PROMPT));
-#else
- prompt = savestring ("(gdb) ", 6);
-#endif
-
- /* Set the important stuff up for command editing. */
- command_editing_p = 1;
- history_expansion_p = 0;
- write_history_p = 0;
-
- /* Setup important stuff for command line editing. */
- rl_completion_entry_function = (int (*)()) symbol_completion_function;
- rl_completer_word_break_characters = gdb_completer_word_break_characters;
- rl_completer_quote_characters = gdb_completer_quote_characters;
- rl_readline_name = "gdb";
-
- /* Define the classes of commands.
- They will appear in the help list in the reverse of this order. */
-
- add_cmd ("internals", class_maintenance, NO_FUNCTION,
- "Maintenance commands.\n\
-Some gdb commands are provided just for use by gdb maintainers.\n\
-These commands are subject to frequent change, and may not be as\n\
-well documented as user commands.",
- &cmdlist);
- add_cmd ("obscure", class_obscure, NO_FUNCTION, "Obscure features.", &cmdlist);
- add_cmd ("aliases", class_alias, NO_FUNCTION, "Aliases of other commands.", &cmdlist);
- add_cmd ("user-defined", class_user, NO_FUNCTION, "User-defined commands.\n\
-The commands in this class are those defined by the user.\n\
-Use the \"define\" command to define a command.", &cmdlist);
- add_cmd ("support", class_support, NO_FUNCTION, "Support facilities.", &cmdlist);
- add_cmd ("status", class_info, NO_FUNCTION, "Status inquiries.", &cmdlist);
- add_cmd ("files", class_files, NO_FUNCTION, "Specifying and examining files.", &cmdlist);
- add_cmd ("breakpoints", class_breakpoint, NO_FUNCTION, "Making program stop at certain points.", &cmdlist);
- add_cmd ("data", class_vars, NO_FUNCTION, "Examining data.", &cmdlist);
- add_cmd ("stack", class_stack, NO_FUNCTION, "Examining the stack.\n\
-The stack is made up of stack frames. Gdb assigns numbers to stack frames\n\
-counting from zero for the innermost (currently executing) frame.\n\n\
-At any time gdb identifies one frame as the \"selected\" frame.\n\
-Variable lookups are done with respect to the selected frame.\n\
-When the program being debugged stops, gdb selects the innermost frame.\n\
-The commands below can be used to select other frames by number or address.",
- &cmdlist);
- add_cmd ("running", class_run, NO_FUNCTION, "Running the program.", &cmdlist);
-
- add_com ("pwd", class_files, pwd_command,
- "Print working directory. This is used for your program as well.");
- c = add_cmd ("cd", class_files, cd_command,
- "Set working directory to DIR for debugger and program being debugged.\n\
-The change does not take effect for the program being debugged\n\
-until the next time it is started.", &cmdlist);
- c->completer = filename_completer;
-
- add_show_from_set
- (add_set_cmd ("prompt", class_support, var_string, (char *)&prompt,
- "Set gdb's prompt",
- &setlist),
- &showlist);
-
- add_com ("echo", class_support, echo_command,
- "Print a constant string. Give string as argument.\n\
-C escape sequences may be used in the argument.\n\
-No newline is added at the end of the argument;\n\
-use \"\\n\" if you want a newline to be printed.\n\
-Since leading and trailing whitespace are ignored in command arguments,\n\
-if you want to print some you must use \"\\\" before leading whitespace\n\
-to be printed or after trailing whitespace.");
- add_com ("document", class_support, document_command,
- "Document a user-defined command.\n\
-Give command name as argument. Give documentation on following lines.\n\
-End with a line of just \"end\".");
- add_com ("define", class_support, define_command,
- "Define a new command name. Command name is argument.\n\
-Definition appears on following lines, one command per line.\n\
-End with a line of just \"end\".\n\
-Use the \"document\" command to give documentation for the new command.\n\
-Commands defined in this way do not take arguments.");
-
-#ifdef __STDC__
- c = add_cmd ("source", class_support, source_command,
- "Read commands from a file named FILE.\n\
-Note that the file \"" GDBINIT_FILENAME "\" is read automatically in this way\n\
-when gdb is started.", &cmdlist);
-#else
- /* Punt file name, we can't help it easily. */
- c = add_cmd ("source", class_support, source_command,
- "Read commands from a file named FILE.\n\
-Note that the file \".gdbinit\" is read automatically in this way\n\
-when gdb is started.", &cmdlist);
-#endif
- c->completer = filename_completer;
-
- add_com ("quit", class_support, quit_command, "Exit gdb.");
- add_com ("help", class_support, help_command, "Print list of commands.");
- add_com_alias ("q", "quit", class_support, 1);
- add_com_alias ("h", "help", class_support, 1);
-
-
- c = add_set_cmd ("verbose", class_support, var_boolean, (char *)&info_verbose,
- "Set ",
- &setlist),
- add_show_from_set (c, &showlist);
- c->function.sfunc = set_verbose;
- set_verbose (NULL, 0, c);
-
- add_show_from_set
- (add_set_cmd ("editing", class_support, var_boolean, (char *)&command_editing_p,
- "Set editing of command lines as they are typed.\n\
-Use \"on\" to enable to enable the editing, and \"off\" to disable it.\n\
-Without an argument, command line editing is enabled. To edit, use\n\
-EMACS-like or VI-like commands like control-P or ESC.", &setlist),
- &showlist);
-
- add_prefix_cmd ("history", class_support, set_history,
- "Generic command for setting command history parameters.",
- &sethistlist, "set history ", 0, &setlist);
- add_prefix_cmd ("history", class_support, show_history,
- "Generic command for showing command history parameters.",
- &showhistlist, "show history ", 0, &showlist);
-
- add_show_from_set
- (add_set_cmd ("expansion", no_class, var_boolean, (char *)&history_expansion_p,
- "Set history expansion on command input.\n\
-Without an argument, history expansion is enabled.", &sethistlist),
- &showhistlist);
-
- add_show_from_set
- (add_set_cmd ("save", no_class, var_boolean, (char *)&write_history_p,
- "Set saving of the history record on exit.\n\
-Use \"on\" to enable to enable the saving, and \"off\" to disable it.\n\
-Without an argument, saving is enabled.", &sethistlist),
- &showhistlist);
-
- c = add_set_cmd ("size", no_class, var_integer, (char *)&history_size,
- "Set the size of the command history, \n\
-ie. the number of previous commands to keep a record of.", &sethistlist);
- add_show_from_set (c, &showhistlist);
- c->function.sfunc = set_history_size_command;
-
- add_show_from_set
- (add_set_cmd ("filename", no_class, var_filename, (char *)&history_filename,
- "Set the filename in which to record the command history\n\
- (the list of previous commands of which a record is kept).", &sethistlist),
- &showhistlist);
-
- add_show_from_set
- (add_set_cmd ("confirm", class_support, var_boolean,
- (char *)&caution,
- "Set whether to confirm potentially dangerous operations.",
- &setlist),
- &showlist);
-
- add_prefix_cmd ("info", class_info, info_command,
- "Generic command for showing things about the program being debugged.",
- &infolist, "info ", 0, &cmdlist);
- add_com_alias ("i", "info", class_info, 1);
-
- add_com ("complete", class_obscure, complete_command,
- "List the completions for the rest of the line as a command.");
-
- add_prefix_cmd ("show", class_info, show_command,
- "Generic command for showing things about the debugger.",
- &showlist, "show ", 0, &cmdlist);
- /* Another way to get at the same thing. */
- add_info ("set", show_command, "Show all GDB settings.");
-
- add_cmd ("commands", no_class, show_commands,
- "Show the the history of commands you typed.\n\
-You can supply a command number to start with, or a `+' to start after\n\
-the previous command number shown.",
- &showlist);
-
- add_cmd ("version", no_class, show_version,
- "Show what version of GDB this is.", &showlist);
-
- /* If target is open when baud changes, it doesn't take effect until the
- next open (I think, not sure). */
- add_show_from_set (add_set_cmd ("remotebaud", no_class,
- var_zinteger, (char *)&baud_rate,
- "Set baud rate for remote serial I/O.\n\
-This value is used to set the speed of the serial port when debugging\n\
-using remote targets.", &setlist),
- &showlist);
-
- add_show_from_set (
- add_set_cmd ("remotedebug", no_class, var_zinteger, (char *)&remote_debug,
- "Set debugging of remote protocol.\n\
-When enabled, each packet sent or received with the remote target\n\
-is displayed.", &setlist),
- &showlist);