-GDB is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 1, or (at your option)
-any later version.
+ GDB is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 1, or (at your option)
+ any later version.
-GDB is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
+ GDB is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330,
+ Boston, MA 02111-1307, USA. */
- Request
-Command
-Reply
- read registers:
-DR<cr>
- - 0 - - 1 - - 2 - - 3 - - 4 - - 5 - -- 6 - - 7 -
-D = XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
-A = XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
- PC = XXXXXX SSP = XXXXXX USP = XXXXXX SR = XXXXXXXX
- >
-Each byte of register data is described by two hex digits.
-
- write regs
-D0=XXXXXXXX<cr>
- >D1=XXXXXXXX<cr>
- >D2=XXXXXXXX<cr>
- >D3=XXXXXXXX<cr>
- >D4=XXXXXXXX<cr>
- >D5=XXXXXXXX<cr>
- >D6=XXXXXXXX<cr>
- >D7=XXXXXXXX<cr>
- >A0=XXXXXXXX<cr>
- >A1=XXXXXXXX<cr>
- >A2=XXXXXXXX<cr>
- >A3=XXXXXXXX<cr>
- >A4=XXXXXXXX<cr>
- >A5=XXXXXXXX<cr>
- >A6=XXXXXXXX<cr>
- >A7=XXXXXXXX<cr>
- >SR=XXXXXXXX<cr>
- >PC=XXXXXX<cr>
- >
-Each byte of register data is described by two hex digits.
-
- read mem
-@.BAA..AA
-$FFFFFFXX
- >
-AA..AA is address, XXXXXXX is the contents
-
- write mem
- @.BAA..AA=$XXXXXXXX
- >
-AA..AA is address, XXXXXXXX is data
-
- cont
-PC=$AA..AA
- >RBK
-R>
-AA..AA is address to resume. If AA..AA is omitted, resume at same address.
-
- step
-PC=$AA..AA
- >STP
-R>
-AA..AA is address to resume. If AA..AA is omitted, resume at same address.
-
- kill req
-STP
- >
-*/
+ Request
+ Command
+ Reply
+ read registers:
+ DR<cr>
+ - 0 - - 1 - - 2 - - 3 - - 4 - - 5 - -- 6 - - 7 -
+ D = XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
+ A = XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
+ PC = XXXXXX SSP = XXXXXX USP = XXXXXX SR = XXXXXXXX
+ >
+ Each byte of register data is described by two hex digits.
+
+ write regs
+ D0=XXXXXXXX<cr>
+ >D1=XXXXXXXX<cr>
+ >D2=XXXXXXXX<cr>
+ >D3=XXXXXXXX<cr>
+ >D4=XXXXXXXX<cr>
+ >D5=XXXXXXXX<cr>
+ >D6=XXXXXXXX<cr>
+ >D7=XXXXXXXX<cr>
+ >A0=XXXXXXXX<cr>
+ >A1=XXXXXXXX<cr>
+ >A2=XXXXXXXX<cr>
+ >A3=XXXXXXXX<cr>
+ >A4=XXXXXXXX<cr>
+ >A5=XXXXXXXX<cr>
+ >A6=XXXXXXXX<cr>
+ >A7=XXXXXXXX<cr>
+ >SR=XXXXXXXX<cr>
+ >PC=XXXXXX<cr>
+ >
+ Each byte of register data is described by two hex digits.
+
+ read mem
+ @.BAA..AA
+ $FFFFFFXX
+ >
+ AA..AA is address, XXXXXXX is the contents
+
+ write mem
+ @.BAA..AA=$XXXXXXXX
+ >
+ AA..AA is address, XXXXXXXX is data
+
+ cont
+ PC=$AA..AA
+ >RBK
+ R>
+ AA..AA is address to resume. If AA..AA is omitted, resume at same address.
+
+ step
+ PC=$AA..AA
+ >STP
+ R>
+ AA..AA is address to resume. If AA..AA is omitted, resume at same address.
+
+ kill req
+ STP
+ >
+ */
- fcflag = (fcflag & (FREAD | FWRITE)); /* mask out any funny stuff */
- if (fcntl (es1800_desc->fd, F_SETFL, fcflag) == -1)
+ fcflag = (fcflag & (FREAD | FWRITE)); /* mask out any funny stuff */
+ if (fcntl (DEPRECATED_SERIAL_FD (es1800_desc), F_SETFL, fcflag) == -1)
/* Hello? Are you there?, also check mode */
/* send_with_reply( "DB 0 TO 1", buf, sizeof(buf)); */
/* Hello? Are you there?, also check mode */
/* send_with_reply( "DB 0 TO 1", buf, sizeof(buf)); */
printf ("\nClosing connection to emulator...\n");
if (SERIAL_SET_TTY_STATE (es1800_desc, es1800_saved_ttystate) < 0)
print_sys_errmsg ("warning: unable to restore tty state", errno);
printf ("\nClosing connection to emulator...\n");
if (SERIAL_SET_TTY_STATE (es1800_desc, es1800_saved_ttystate) < 0)
print_sys_errmsg ("warning: unable to restore tty state", errno);
- {
- getmessage (buf, sizeof(buf));
- if (strncmp ( buf, "\r\n* BREAK *", 11) == 0)
+ {
+ getmessage (buf, sizeof (buf));
+ if (strncmp (buf, "\r\n* BREAK *", 11) == 0)
printf (" emulator stopped\n");
status->kind = TARGET_WAITKIND_STOPPED;
status->value.sig = TARGET_SIGNAL_INT;
printf (" emulator stopped\n");
status->kind = TARGET_WAITKIND_STOPPED;
status->value.sig = TARGET_SIGNAL_INT;
- static char regtab[18][4] =
- {
- "D0 ", "D1 ", "D2 ", "D3 ", "D4 ", "D5 ", "D6 ", "D7 ",
- "A0 ", "A1 ", "A2 ", "A3 ", "A4 ", "A5 ", "A6 ", "SSP",
- "SR ", "PC "
- };
+ static char regtab[18][4] =
+ {
+ "D0 ", "D1 ", "D2 ", "D3 ", "D4 ", "D5 ", "D6 ", "D7 ",
+ "A0 ", "A1 ", "A2 ", "A3 ", "A4 ", "A5 ", "A6 ", "SSP",
+ "SR ", "PC "
+ };
}
}
/* Store register value, located in REGISTER, on the target processor.
regno - the register-number of the register to store
}
}
/* Store register value, located in REGISTER, on the target processor.
regno - the register-number of the register to store
- {
- "D0 ", "D1 ", "D2 ", "D3 ", "D4 ", "D5 ", "D6 ", "D7 ",
- "A0 ", "A1 ", "A2 ", "A3 ", "A4 ", "A5 ", "A6 ", "SSP",
- "SR ", "PC "
- };
+ {
+ "D0 ", "D1 ", "D2 ", "D3 ", "D4 ", "D5 ", "D6 ", "D7 ",
+ "A0 ", "A1 ", "A2 ", "A3 ", "A4 ", "A5 ", "A6 ", "SSP",
+ "SR ", "PC "
+ };
/* Read or write LEN bytes from inferior memory at MEMADDR, transferring
to or from debugger address MYADDR. Write to inferior if WRITE is
nonzero. Returns length of data written or read; 0 for error.
/* Read or write LEN bytes from inferior memory at MEMADDR, transferring
to or from debugger address MYADDR. Write to inferior if WRITE is
nonzero. Returns length of data written or read; 0 for error.
MEMADDR is the address in the remote memory space.
MYADDR is the address of the buffer in our space.
LEN is the number of bytes.
MEMADDR is the address in the remote memory space.
MYADDR is the address of the buffer in our space.
LEN is the number of bytes.
- sprintf (buf, "@.B$%x=$%x", memaddr+i, (*p++) & 0xff);
- send_with_reply (buf, buf, sizeof (buf)); /* FIXME send_command? */
+ sprintf (buf, "@.B$%x=$%x", memaddr + i, (*p++) & 0xff);
+ send_with_reply (buf, buf, sizeof (buf)); /* FIXME send_command? */
- static int DB_tab[16] = {8,11,14,17,20,23,26,29,34,37,40,43,46,49,52,55};
+ static int DB_tab[16] =
+ {8, 11, 14, 17, 20, 23, 26, 29, 34, 37, 40, 43, 46, 49, 52, 55};
- memaddress += (vec + 32) * 4; /* address of trap vector */
- status = target_read_memory (memaddress, (char *) addrp, 4);
- if (status != 0)
- {
- memory_error (status, memaddress);
- }
+ memaddress += (vec + 32) * 4; /* address of trap vector */
+ status = target_read_memory (memaddress, (char *) addrp, 4);
+ if (status != 0)
+ {
+ memory_error (status, memaddress);
+ }
Also loads the trap routine, and sets the ES1800 breakpoint on it
filename - the a.out to be loaded
from_tty - says whether to be verbose or not
Also loads the trap routine, and sets the ES1800 breakpoint on it
filename - the a.out to be loaded
from_tty - says whether to be verbose or not
- case 2: /* Extended Tekhex */
- if (from_tty)
- {
- printf ("Converting \"%s\" to Extended Tekhex Format\n", filename);
- }
- sprintf (buf, "tekhex %s", filename);
- system (buf);
- sprintf (loadname, "out.hex");
- break;
-
- case 5: /* Motorola S-rec */
- if (from_tty)
- {
- printf ("Converting \"%s\" to Motorola S-record format\n",
- filename);
- }
- /* in the future the source code in copy (part of binutils-1.93) will
- be included in this file */
- sprintf (buf,
- "copy -s \"a.out-sunos-big\" -d \"srec\" %s /tmp/out.hex",
- filename);
- system (buf);
- sprintf (loadname, "/tmp/out.hex");
- break;
-
- default:
- error ("Downloading format not defined\n");
- }
-
+ case 2: /* Extended Tekhex */
+ if (from_tty)
+ {
+ printf ("Converting \"%s\" to Extended Tekhex Format\n", filename);
+ }
+ sprintf (buf, "tekhex %s", filename);
+ system (buf);
+ sprintf (loadname, "out.hex");
+ break;
+
+ case 5: /* Motorola S-rec */
+ if (from_tty)
+ {
+ printf ("Converting \"%s\" to Motorola S-record format\n",
+ filename);
+ }
+ /* in the future the source code in copy (part of binutils-1.93) will
+ be included in this file */
+ sprintf (buf,
+ "copy -s \"a.out-sunos-big\" -d \"srec\" %s /tmp/out.hex",
+ filename);
+ system (buf);
+ sprintf (loadname, "/tmp/out.hex");
+ break;
+
+ default:
+ error ("Downloading format not defined\n");
+ }
+
- if (!bfd_set_section_contents (to_bfd, new, (PTR) buf, (file_ptr) i,
- (bfd_size_type) NUMCPYBYTES))
- {
- error ("bfd_set_section_contents\n");
- }
- }
+ if (!bfd_set_section_contents (to_bfd, new, (PTR) buf, (file_ptr) i,
+ (bfd_size_type) NUMCPYBYTES))
+ {
+ error ("bfd_set_section_contents\n");
+ }
+ }
bfd_get_section_contents (from_bfd, p, (PTR) buf, (file_ptr) i,
(bfd_size_type) (p->_cooked_size - i));
bfd_get_section_contents (from_bfd, p, (PTR) buf, (file_ptr) i,
(bfd_size_type) (p->_cooked_size - i));
Let the user break out immediately.
string - the string to expect
nowait - break out if string not the emulator's first respond otherwise
Let the user break out immediately.
string - the string to expect
nowait - break out if string not the emulator's first respond otherwise
/* Send the command in STR to the emulator adding \r. check
the echo for consistency.
string - the es1800 command */
/* Send the command in STR to the emulator adding \r. check
the echo for consistency.
string - the es1800 command */
- send_command ("SET #2,$1A"); /* reset char = ^Z */
- send_command ("SET #3,$11,$13"); /* XON XOFF */
+ send_command ("SET #2,$1A"); /* reset char = ^Z */
+ send_command ("SET #3,$11,$13"); /* XON XOFF */
- {
- send (buf);
- if (from_tty)
- {
- printf ("%5d\b\b\b\b\b",++i);
- fflush (stdout);
- }
- if ((c = readchar ()) != 006)
- {
- error ("expected ACK");
- }
- }
+ {
+ send (buf);
+ if (from_tty)
+ {
+ printf ("%5d\b\b\b\b\b", ++i);
+ fflush (stdout);
+ }
+ if ((c = readchar ()) != 006)
+ {
+ error ("expected ACK");
+ }
+ }
- send_command (buf); /* set the address of the break routine in the */
- /* trap vector */
-
- sprintf (buf, "@.L%lx=$4E714E71", es1800_break_address); /* NOP; NOP */
+ send_command (buf); /* set the address of the break routine in the */
+ /* trap vector */
+
+ sprintf (buf, "@.L%lx=$4E714E71", es1800_break_address); /* NOP; NOP */
- es1800_ops.to_shortname = "es1800";
- es1800_ops.to_longname = "Remote serial target in ES1800-emulator protocol";
- es1800_ops.to_doc = "Remote debugging on the es1800 emulator via a serial line.\n\
-Specify the serial device it is connected to (e.g. /dev/ttya)." ;
- es1800_ops.to_open = es1800_open;
- es1800_ops.to_close = es1800_close;
- es1800_ops.to_attach = es1800_attach;
- es1800_ops.to_post_attach = NULL;
+ es1800_ops.to_shortname = "es1800";
+ es1800_ops.to_longname = "Remote serial target in ES1800-emulator protocol";
+ es1800_ops.to_doc = "Remote debugging on the es1800 emulator via a serial line.\n\
+Specify the serial device it is connected to (e.g. /dev/ttya).";
+ es1800_ops.to_open = es1800_open;
+ es1800_ops.to_close = es1800_close;
+ es1800_ops.to_attach = es1800_attach;
+ es1800_ops.to_post_attach = NULL;
- es1800_ops.to_resume = es1800_resume;
- es1800_ops.to_wait = NULL;
- es1800_ops.to_post_wait = NULL;
- es1800_ops.to_fetch_registers = NULL;
- es1800_ops.to_store_registers = NULL;
- es1800_ops.to_prepare_to_store = es1800_prepare_to_store;
- es1800_ops.to_xfer_memory = es1800_xfer_inferior_memory;
- es1800_ops.to_files_info = es1800_files_info;
- es1800_ops.to_insert_breakpoint = es1800_insert_breakpoint;
- es1800_ops.to_remove_breakpoint = es1800_remove_breakpoint;
- es1800_ops.to_terminal_init = NULL;
- es1800_ops.to_terminal_inferior = NULL;
- es1800_ops.to_terminal_ours_for_output = NULL;
- es1800_ops.to_terminal_ours = NULL;
- es1800_ops.to_terminal_info = NULL;
- es1800_ops.to_kill = NULL;
- es1800_ops.to_load = es1800_load;
- es1800_ops.to_lookup_symbol = NULL;
- es1800_ops.to_create_inferior = es1800_create_inferior;
+ es1800_ops.to_resume = es1800_resume;
+ es1800_ops.to_wait = NULL;
+ es1800_ops.to_post_wait = NULL;
+ es1800_ops.to_fetch_registers = NULL;
+ es1800_ops.to_store_registers = NULL;
+ es1800_ops.to_prepare_to_store = es1800_prepare_to_store;
+ es1800_ops.to_xfer_memory = es1800_xfer_inferior_memory;
+ es1800_ops.to_files_info = es1800_files_info;
+ es1800_ops.to_insert_breakpoint = es1800_insert_breakpoint;
+ es1800_ops.to_remove_breakpoint = es1800_remove_breakpoint;
+ es1800_ops.to_terminal_init = NULL;
+ es1800_ops.to_terminal_inferior = NULL;
+ es1800_ops.to_terminal_ours_for_output = NULL;
+ es1800_ops.to_terminal_ours = NULL;
+ es1800_ops.to_terminal_info = NULL;
+ es1800_ops.to_kill = NULL;
+ es1800_ops.to_load = es1800_load;
+ es1800_ops.to_lookup_symbol = NULL;
+ es1800_ops.to_create_inferior = es1800_create_inferior;
es1800_ops.to_post_follow_inferior_by_clone = NULL;
es1800_ops.to_insert_fork_catchpoint = NULL;
es1800_ops.to_remove_fork_catchpoint = NULL;
es1800_ops.to_insert_vfork_catchpoint = NULL;
es1800_ops.to_post_follow_inferior_by_clone = NULL;
es1800_ops.to_insert_fork_catchpoint = NULL;
es1800_ops.to_remove_fork_catchpoint = NULL;
es1800_ops.to_insert_vfork_catchpoint = NULL;
es1800_ops.to_post_follow_vfork = NULL;
es1800_ops.to_insert_exec_catchpoint = NULL;
es1800_ops.to_remove_exec_catchpoint = NULL;
es1800_ops.to_has_execd = NULL;
es1800_ops.to_reported_exec_events_per_exec_call = NULL;
es1800_ops.to_has_exited = NULL;
es1800_ops.to_post_follow_vfork = NULL;
es1800_ops.to_insert_exec_catchpoint = NULL;
es1800_ops.to_remove_exec_catchpoint = NULL;
es1800_ops.to_has_execd = NULL;
es1800_ops.to_reported_exec_events_per_exec_call = NULL;
es1800_ops.to_has_exited = NULL;
- es1800_ops.to_mourn_inferior = NULL;
- es1800_ops.to_can_run = 0;
- es1800_ops.to_notice_signals = 0;
- es1800_ops.to_thread_alive = 0;
- es1800_ops.to_stop = 0;
+ es1800_ops.to_mourn_inferior = NULL;
+ es1800_ops.to_can_run = 0;
+ es1800_ops.to_notice_signals = 0;
+ es1800_ops.to_thread_alive = 0;
+ es1800_ops.to_stop = 0;
- es1800_ops.to_core_file_to_sym_file = NULL;
- es1800_ops.to_stratum = core_stratum;
- es1800_ops.DONT_USE = 0;
- es1800_ops.to_has_all_memory = 0;
- es1800_ops.to_has_memory = 1;
- es1800_ops.to_has_stack = 0;
- es1800_ops.to_has_registers = 0;
- es1800_ops.to_has_execution = 0;
- es1800_ops.to_sections = NULL;
- es1800_ops.to_sections_end = NULL;
- es1800_ops.to_magic = OPS_MAGIC ;
+ es1800_ops.to_core_file_to_sym_file = NULL;
+ es1800_ops.to_stratum = core_stratum;
+ es1800_ops.DONT_USE = 0;
+ es1800_ops.to_has_all_memory = 0;
+ es1800_ops.to_has_memory = 1;
+ es1800_ops.to_has_stack = 0;
+ es1800_ops.to_has_registers = 0;
+ es1800_ops.to_has_execution = 0;
+ es1800_ops.to_sections = NULL;
+ es1800_ops.to_sections_end = NULL;
+ es1800_ops.to_magic = OPS_MAGIC;
- es1800_child_ops.to_shortname = "es1800_process";
- es1800_child_ops.to_longname = "Remote serial target in ES1800-emulator protocol";
- es1800_child_ops.to_doc = "Remote debugging on the es1800 emulator via a serial line.\n\
+ es1800_child_ops.to_shortname = "es1800_process";
+ es1800_child_ops.to_longname = "Remote serial target in ES1800-emulator protocol";
+ es1800_child_ops.to_doc = "Remote debugging on the es1800 emulator via a serial line.\n\
- es1800_child_ops.to_open = es1800_child_open;
- es1800_child_ops.to_close = NULL;
- es1800_child_ops.to_attach = es1800_attach;
+ es1800_child_ops.to_open = es1800_child_open;
+ es1800_child_ops.to_close = NULL;
+ es1800_child_ops.to_attach = es1800_attach;
- es1800_child_ops.to_require_attach = NULL;
- es1800_child_ops.to_detach = es1800_child_detach;
- es1800_child_ops.to_require_detach = NULL;
- es1800_child_ops.to_resume = es1800_resume;
- es1800_child_ops.to_wait = es1800_wait;
- es1800_child_ops.to_post_wait = NULL;
- es1800_child_ops.to_fetch_registers = es1800_fetch_register;
- es1800_child_ops.to_store_registers = es1800_store_register;
- es1800_child_ops.to_prepare_to_store = es1800_prepare_to_store;
- es1800_child_ops.to_xfer_memory = es1800_xfer_inferior_memory;
- es1800_child_ops.to_files_info = es1800_files_info;
- es1800_child_ops.to_insert_breakpoint = es1800_insert_breakpoint;
- es1800_child_ops.to_remove_breakpoint = es1800_remove_breakpoint;
- es1800_child_ops.to_terminal_init = NULL;
- es1800_child_ops.to_terminal_inferior = NULL;
- es1800_child_ops.to_terminal_ours_for_output = NULL;
- es1800_child_ops.to_terminal_ours = NULL;
- es1800_child_ops.to_terminal_info = NULL;
- es1800_child_ops.to_kill = es1800_kill;
- es1800_child_ops.to_load = es1800_load;
- es1800_child_ops.to_lookup_symbol = NULL;
- es1800_child_ops.to_create_inferior = es1800_create_inferior;
+ es1800_child_ops.to_require_attach = NULL;
+ es1800_child_ops.to_detach = es1800_child_detach;
+ es1800_child_ops.to_require_detach = NULL;
+ es1800_child_ops.to_resume = es1800_resume;
+ es1800_child_ops.to_wait = es1800_wait;
+ es1800_child_ops.to_post_wait = NULL;
+ es1800_child_ops.to_fetch_registers = es1800_fetch_register;
+ es1800_child_ops.to_store_registers = es1800_store_register;
+ es1800_child_ops.to_prepare_to_store = es1800_prepare_to_store;
+ es1800_child_ops.to_xfer_memory = es1800_xfer_inferior_memory;
+ es1800_child_ops.to_files_info = es1800_files_info;
+ es1800_child_ops.to_insert_breakpoint = es1800_insert_breakpoint;
+ es1800_child_ops.to_remove_breakpoint = es1800_remove_breakpoint;
+ es1800_child_ops.to_terminal_init = NULL;
+ es1800_child_ops.to_terminal_inferior = NULL;
+ es1800_child_ops.to_terminal_ours_for_output = NULL;
+ es1800_child_ops.to_terminal_ours = NULL;
+ es1800_child_ops.to_terminal_info = NULL;
+ es1800_child_ops.to_kill = es1800_kill;
+ es1800_child_ops.to_load = es1800_load;
+ es1800_child_ops.to_lookup_symbol = NULL;
+ es1800_child_ops.to_create_inferior = es1800_create_inferior;
es1800_child_ops.to_post_startup_inferior = NULL;
es1800_child_ops.to_acknowledge_created_inferior = NULL;
es1800_child_ops.to_clone_and_follow_inferior = NULL;
es1800_child_ops.to_post_startup_inferior = NULL;
es1800_child_ops.to_acknowledge_created_inferior = NULL;
es1800_child_ops.to_clone_and_follow_inferior = NULL;
es1800_child_ops.to_insert_fork_catchpoint = NULL;
es1800_child_ops.to_remove_fork_catchpoint = NULL;
es1800_child_ops.to_insert_vfork_catchpoint = NULL;
es1800_child_ops.to_insert_fork_catchpoint = NULL;
es1800_child_ops.to_remove_fork_catchpoint = NULL;
es1800_child_ops.to_insert_vfork_catchpoint = NULL;
es1800_child_ops.to_can_follow_vfork_prior_to_exec = NULL;
es1800_child_ops.to_post_follow_vfork = NULL;
es1800_child_ops.to_insert_exec_catchpoint = NULL;
es1800_child_ops.to_can_follow_vfork_prior_to_exec = NULL;
es1800_child_ops.to_post_follow_vfork = NULL;
es1800_child_ops.to_insert_exec_catchpoint = NULL;
es1800_child_ops.to_has_execd = NULL;
es1800_child_ops.to_reported_exec_events_per_exec_call = NULL;
es1800_child_ops.to_has_exited = NULL;
es1800_child_ops.to_has_execd = NULL;
es1800_child_ops.to_reported_exec_events_per_exec_call = NULL;
es1800_child_ops.to_has_exited = NULL;
- es1800_child_ops.to_mourn_inferior = es1800_mourn_inferior;
- es1800_child_ops.to_can_run = 0;
- es1800_child_ops.to_notice_signals = 0;
- es1800_child_ops.to_thread_alive = 0;
- es1800_child_ops.to_stop = 0;
+ es1800_child_ops.to_mourn_inferior = es1800_mourn_inferior;
+ es1800_child_ops.to_can_run = 0;
+ es1800_child_ops.to_notice_signals = 0;
+ es1800_child_ops.to_thread_alive = 0;
+ es1800_child_ops.to_stop = 0;
- es1800_child_ops.to_stratum = process_stratum;
- es1800_child_ops.DONT_USE = 0;
- es1800_child_ops.to_has_all_memory = 1;
- es1800_child_ops.to_has_memory = 1;
- es1800_child_ops.to_has_stack = 1;
- es1800_child_ops.to_has_registers = 1;
- es1800_child_ops.to_has_execution = 1;
- es1800_child_ops.to_sections = NULL;
- es1800_child_ops.to_sections_end = NULL;
- es1800_child_ops.to_magic = OPS_MAGIC;
+ es1800_child_ops.to_stratum = process_stratum;
+ es1800_child_ops.DONT_USE = 0;
+ es1800_child_ops.to_has_all_memory = 1;
+ es1800_child_ops.to_has_memory = 1;
+ es1800_child_ops.to_has_stack = 1;
+ es1800_child_ops.to_has_registers = 1;
+ es1800_child_ops.to_has_execution = 1;
+ es1800_child_ops.to_sections = NULL;
+ es1800_child_ops.to_sections_end = NULL;
+ es1800_child_ops.to_magic = OPS_MAGIC;
"Start transparent communication with the ES 1800 emulator.");
#endif /* PROVIDE_TRANSPARENT */
add_com ("init_break", class_support, es1800_init_break,
"Start transparent communication with the ES 1800 emulator.");
#endif /* PROVIDE_TRANSPARENT */
add_com ("init_break", class_support, es1800_init_break,
projects / deliverable / binutils-gdb.git / blobdiff