+extern serial_ttystate serial_copy_tty_state (struct serial *scb,
+ serial_ttystate ttystate);
+
+/* Set the state of the tty to TTYSTATE. The change is immediate.
+ When changing to or from raw mode, input might be discarded.
+ Returns 0 for success, negative value for error (in which case
+ errno contains the error). */
+
+extern int serial_set_tty_state (struct serial *scb, serial_ttystate ttystate);
+
+/* printf_filtered a user-comprehensible description of ttystate on
+ the specified STREAM. FIXME: At present this sends output to the
+ default stream - GDB_STDOUT. */
+
+extern void serial_print_tty_state (struct serial *scb,
+ serial_ttystate ttystate,
+ struct ui_file *);
+
+/* Set the tty state to NEW_TTYSTATE, where OLD_TTYSTATE is the
+ current state (generally obtained from a recent call to
+ serial_get_tty_state()), but be careful not to discard any input.
+ This means that we never switch in or out of raw mode, even if
+ NEW_TTYSTATE specifies a switch. */
+
+extern int serial_noflush_set_tty_state (struct serial *scb,
+ serial_ttystate new_ttystate,
+ serial_ttystate old_ttystate);
+
+/* Set the baudrate to the decimal value supplied. Returns 0 for
+ success, -1 for failure. */
+
+extern int serial_setbaudrate (struct serial *scb, int rate);
+
+/* Set the number of stop bits to the value specified. Returns 0 for
+ success, -1 for failure. */
+
+#define SERIAL_1_STOPBITS 1
+#define SERIAL_1_AND_A_HALF_STOPBITS 2 /* 1.5 bits, snicker... */
+#define SERIAL_2_STOPBITS 3
+
+extern int serial_setstopbits (struct serial *scb, int num);
+
+#define GDBPARITY_NONE 0
+#define GDBPARITY_ODD 1
+#define GDBPARITY_EVEN 2
+
+/* Set parity for serial port. Returns 0 for success, -1 for failure. */
+
+extern int serial_setparity (struct serial *scb, int parity);
+
+/* Asynchronous serial interface: */
+
+/* Can the serial device support asynchronous mode? */
+
+extern int serial_can_async_p (struct serial *scb);
+
+/* Has the serial device been put in asynchronous mode? */
+
+extern int serial_is_async_p (struct serial *scb);
+
+/* For ASYNC enabled devices, register a callback and enable
+ asynchronous mode. To disable asynchronous mode, register a NULL
+ callback. */
+
+typedef void (serial_event_ftype) (struct serial *scb, void *context);
+extern void serial_async (struct serial *scb,
+ serial_event_ftype *handler, void *context);
+
+/* Trace/debug mechanism.
+
+ serial_debug() enables/disables internal debugging.
+ serial_debug_p() indicates the current debug state. */
+
+extern void serial_debug (struct serial *scb, int debug_p);
+
+extern int serial_debug_p (struct serial *scb);
+
+
+/* Details of an instance of a serial object. */
+
+struct serial
+ {
+ /* serial objects are ref counted (but not the underlying
+ connection, just the object's lifetime in memory). */
+ int refcnt;
+
+ int fd; /* File descriptor */
+ /* File descriptor for a separate error stream that should be
+ immediately forwarded to gdb_stderr. This may be -1.
+ If != -1, this descriptor should be non-blocking or
+ ops->avail should be non-NULL. */
+ int error_fd;
+ const struct serial_ops *ops; /* Function vector */
+ void *state; /* Local context info for open FD */
+ serial_ttystate ttystate; /* Not used (yet) */
+ int bufcnt; /* Amount of data remaining in receive
+ buffer. -ve for sticky errors. */
+ unsigned char *bufp; /* Current byte */
+ unsigned char buf[BUFSIZ]; /* Da buffer itself */
+ struct serial *next; /* Pointer to the next `struct serial *' */
+ int debug_p; /* Trace this serial devices operation. */
+ int async_state; /* Async internal state. */
+ void *async_context; /* Async event thread's context */
+ serial_event_ftype *async_handler;/* Async event handler */
+ };
+
+struct serial_ops
+ {
+ const char *name;
+ int (*open) (struct serial *, const char *name);
+ void (*close) (struct serial *);
+ int (*fdopen) (struct serial *, int fd);
+ int (*readchar) (struct serial *, int timeout);
+ int (*write) (struct serial *, const void *buf, size_t count);
+ /* Discard pending output */
+ int (*flush_output) (struct serial *);
+ /* Discard pending input */
+ int (*flush_input) (struct serial *);
+ int (*send_break) (struct serial *);
+ void (*go_raw) (struct serial *);
+ serial_ttystate (*get_tty_state) (struct serial *);
+ serial_ttystate (*copy_tty_state) (struct serial *, serial_ttystate);
+ int (*set_tty_state) (struct serial *, serial_ttystate);
+ void (*print_tty_state) (struct serial *, serial_ttystate,
+ struct ui_file *);
+ int (*noflush_set_tty_state) (struct serial *, serial_ttystate,
+ serial_ttystate);
+ int (*setbaudrate) (struct serial *, int rate);
+ int (*setstopbits) (struct serial *, int num);
+ /* Set the value PARITY as parity setting for serial object.
+ Return 0 in the case of success. */
+ int (*setparity) (struct serial *, int parity);
+ /* Wait for output to drain. */
+ int (*drain_output) (struct serial *);
+ /* Change the serial device into/out of asynchronous mode, call
+ the specified function when ever there is something
+ interesting. */
+ void (*async) (struct serial *scb, int async_p);
+ /* Perform a low-level read operation, reading (at most) COUNT
+ bytes into SCB->BUF. Return zero at end of file. */
+ int (*read_prim)(struct serial *scb, size_t count);
+ /* Perform a low-level write operation, writing (at most) COUNT
+ bytes from BUF. */
+ int (*write_prim)(struct serial *scb, const void *buf, size_t count);
+ /* Return that number of bytes that can be read from FD
+ without blocking. Return value of -1 means that the
+ read will not block even if less that requested bytes
+ are available. */
+ int (*avail)(struct serial *scb, int fd);
+
+#ifdef USE_WIN32API
+ /* Return a handle to wait on, indicating available data from SCB
+ when signaled, in *READ. Return a handle indicating errors
+ in *EXCEPT. */
+ void (*wait_handle) (struct serial *scb, HANDLE *read, HANDLE *except);
+ void (*done_wait_handle) (struct serial *scb);
+#endif /* USE_WIN32API */
+ };
+
+/* Add a new serial interface to the interface list. */
+
+extern void serial_add_interface (const struct serial_ops * optable);
+
+/* File in which to record the remote debugging session. */
+
+extern void serial_log_command (struct target_ops *self, const char *);
+
+#ifdef USE_WIN32API
+
+/* Windows-only: find or create handles that we can wait on for this
+ serial device. */
+extern void serial_wait_handle (struct serial *, HANDLE *, HANDLE *);
+
+/* Windows-only: signal that we are done with the wait handles. */
+extern void serial_done_wait_handle (struct serial *);
+
+#endif /* USE_WIN32API */