+/* Signal trampoline support. */
+
+static void sparc64_linux_sigframe_init (const struct tramp_frame *self,
+ struct frame_info *this_frame,
+ struct trad_frame_cache *this_cache,
+ CORE_ADDR func);
+
+/* See sparc-linux-tdep.c for details. Note that 64-bit binaries only
+ use RT signals. */
+
+static const struct tramp_frame sparc64_linux_rt_sigframe =
+{
+ SIGTRAMP_FRAME,
+ 4,
+ {
+ { 0x82102065, -1 }, /* mov __NR_rt_sigreturn, %g1 */
+ { 0x91d0206d, -1 }, /* ta 0x6d */
+ { TRAMP_SENTINEL_INSN, -1 }
+ },
+ sparc64_linux_sigframe_init
+};
+
+static void
+sparc64_linux_sigframe_init (const struct tramp_frame *self,
+ struct frame_info *this_frame,
+ struct trad_frame_cache *this_cache,
+ CORE_ADDR func)
+{
+ CORE_ADDR base, addr, sp_addr;
+ int regnum;
+
+ base = get_frame_register_unsigned (this_frame, SPARC_O1_REGNUM);
+ base += 128;
+
+ /* Offsets from <bits/sigcontext.h>. */
+
+ /* Since %g0 is always zero, keep the identity encoding. */
+ addr = base + 8;
+ sp_addr = base + ((SPARC_SP_REGNUM - SPARC_G0_REGNUM) * 8);
+ for (regnum = SPARC_G1_REGNUM; regnum <= SPARC_O7_REGNUM; regnum++)
+ {
+ trad_frame_set_reg_addr (this_cache, regnum, addr);
+ addr += 8;
+ }
+
+ trad_frame_set_reg_addr (this_cache, SPARC64_STATE_REGNUM, addr + 0);
+ trad_frame_set_reg_addr (this_cache, SPARC64_PC_REGNUM, addr + 8);
+ trad_frame_set_reg_addr (this_cache, SPARC64_NPC_REGNUM, addr + 16);
+ trad_frame_set_reg_addr (this_cache, SPARC64_Y_REGNUM, addr + 24);
+ trad_frame_set_reg_addr (this_cache, SPARC64_FPRS_REGNUM, addr + 28);
+
+ base = get_frame_register_unsigned (this_frame, SPARC_SP_REGNUM);
+ if (base & 1)
+ base += BIAS;
+
+ addr = get_frame_memory_unsigned (this_frame, sp_addr, 8);
+ if (addr & 1)
+ addr += BIAS;
+
+ for (regnum = SPARC_L0_REGNUM; regnum <= SPARC_I7_REGNUM; regnum++)
+ {
+ trad_frame_set_reg_addr (this_cache, regnum, addr);
+ addr += 8;
+ }
+ trad_frame_set_id (this_cache, frame_id_build (base, func));
+}
+\f
+/* Return the address of a system call's alternative return
+ address. */
+
+static CORE_ADDR
+sparc64_linux_step_trap (struct frame_info *frame, unsigned long insn)
+{
+ /* __NR_rt_sigreturn is 101 */
+ if ((insn == 0x91d0206d)
+ && (get_frame_register_unsigned (frame, SPARC_G1_REGNUM) == 101))
+ {
+ struct gdbarch *gdbarch = get_frame_arch (frame);
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
+
+ ULONGEST sp = get_frame_register_unsigned (frame, SPARC_SP_REGNUM);
+ if (sp & 1)
+ sp += BIAS;
+
+ /* The kernel puts the sigreturn registers on the stack,
+ and this is where the signal unwinding state is take from
+ when returning from a signal.
+
+ A siginfo_t sits 192 bytes from the base of the stack. This
+ siginfo_t is 128 bytes, and is followed by the sigreturn
+ register save area. The saved PC sits at a 136 byte offset
+ into there. */
+
+ return read_memory_unsigned_integer (sp + 192 + 128 + 136,
+ 8, byte_order);
+ }
+
+ return 0;
+}
+\f
+
+const struct sparc_gregmap sparc64_linux_core_gregmap =
+{
+ 32 * 8, /* %tstate */
+ 33 * 8, /* %tpc */
+ 34 * 8, /* %tnpc */
+ 35 * 8, /* %y */
+ -1, /* %wim */
+ -1, /* %tbr */
+ 1 * 8, /* %g1 */
+ 16 * 8, /* %l0 */
+ 8, /* y size */
+};
+\f
+
+static void
+sparc64_linux_supply_core_gregset (const struct regset *regset,
+ struct regcache *regcache,
+ int regnum, const void *gregs, size_t len)
+{
+ sparc64_supply_gregset (&sparc64_linux_core_gregmap,
+ regcache, regnum, gregs);
+}
+
+static void
+sparc64_linux_collect_core_gregset (const struct regset *regset,
+ const struct regcache *regcache,
+ int regnum, void *gregs, size_t len)
+{
+ sparc64_collect_gregset (&sparc64_linux_core_gregmap,
+ regcache, regnum, gregs);
+}
+
+static void
+sparc64_linux_supply_core_fpregset (const struct regset *regset,
+ struct regcache *regcache,
+ int regnum, const void *fpregs, size_t len)
+{
+ sparc64_supply_fpregset (&sparc64_bsd_fpregmap, regcache, regnum, fpregs);
+}
+
+static void
+sparc64_linux_collect_core_fpregset (const struct regset *regset,
+ const struct regcache *regcache,
+ int regnum, void *fpregs, size_t len)
+{
+ sparc64_collect_fpregset (&sparc64_bsd_fpregmap, regcache, regnum, fpregs);
+}
+
+/* Set the program counter for process PTID to PC. */
+
+#define TSTATE_SYSCALL 0x0000000000000020ULL
+
+static void
+sparc64_linux_write_pc (struct regcache *regcache, CORE_ADDR pc)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (get_regcache_arch (regcache));
+ ULONGEST state;
+
+ regcache_cooked_write_unsigned (regcache, tdep->pc_regnum, pc);
+ regcache_cooked_write_unsigned (regcache, tdep->npc_regnum, pc + 4);
+
+ /* Clear the "in syscall" bit to prevent the kernel from
+ messing with the PCs we just installed, if we happen to be
+ within an interrupted system call that the kernel wants to
+ restart.
+
+ Note that after we return from the dummy call, the TSTATE et al.
+ registers will be automatically restored, and the kernel
+ continues to restart the system call at this point. */
+ regcache_cooked_read_unsigned (regcache, SPARC64_STATE_REGNUM, &state);
+ state &= ~TSTATE_SYSCALL;
+ regcache_cooked_write_unsigned (regcache, SPARC64_STATE_REGNUM, state);
+}
+
+static LONGEST
+sparc64_linux_get_syscall_number (struct gdbarch *gdbarch,
+ ptid_t ptid)
+{
+ struct regcache *regcache = get_thread_regcache (ptid);
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
+ /* The content of a register. */
+ gdb_byte buf[8];
+ /* The result. */
+ LONGEST ret;
+
+ /* Getting the system call number from the register.
+ When dealing with the sparc architecture, this information
+ is stored at the %g1 register. */
+ regcache_cooked_read (regcache, SPARC_G1_REGNUM, buf);
+
+ ret = extract_signed_integer (buf, 8, byte_order);
+
+ return ret;
+}
+
+\f
+/* Implement the "get_longjmp_target" gdbarch method. */
+
+static int
+sparc64_linux_get_longjmp_target (struct frame_info *frame, CORE_ADDR *pc)
+{
+ struct gdbarch *gdbarch = get_frame_arch (frame);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+ CORE_ADDR jb_addr;
+ gdb_byte buf[8];
+
+ jb_addr = get_frame_register_unsigned (frame, SPARC_O0_REGNUM);
+
+ /* setjmp and longjmp in SPARC64 are implemented in glibc using the
+ setcontext and getcontext system calls respectively. These
+ system calls operate on ucontext_t structures, which happen to
+ partially have the same structure than jmp_buf. However the
+ ucontext returned by getcontext, and thus the jmp_buf structure
+ returned by setjmp, contains the context of the trap instruction
+ in the glibc __[sig]setjmp wrapper, not the context of the user
+ code calling setjmp.
+
+ %o7 in the jmp_buf structure is stored at offset 18*8 in the
+ mc_gregs array, which is itself located at offset 32 into
+ jmp_buf. See bits/setjmp.h. This register contains the address
+ of the 'call setjmp' instruction in user code.
+
+ In order to determine the longjmp target address in the
+ initiating frame we need to examine the call instruction itself,
+ in particular whether the annul bit is set. If it is not set
+ then we need to jump over the instruction at the delay slot. */
+
+ if (target_read_memory (jb_addr + 32 + (18 * 8), buf, 8))
+ return 0;
+
+ *pc = extract_unsigned_integer (buf, 8, gdbarch_byte_order (gdbarch));
+
+ if (!sparc_is_annulled_branch_insn (*pc))
+ *pc += 4; /* delay slot insn */
+ *pc += 4; /* call insn */
+
+ return 1;
+}
+
+\f
+
+static const struct regset sparc64_linux_gregset =
+ {
+ NULL,
+ sparc64_linux_supply_core_gregset,
+ sparc64_linux_collect_core_gregset
+ };
+
+static const struct regset sparc64_linux_fpregset =
+ {
+ NULL,
+ sparc64_linux_supply_core_fpregset,
+ sparc64_linux_collect_core_fpregset
+ };
+