+uninstall-info:
+ $(PRE_UNINSTALL)
+ @if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
+ ii=yes; \
+ else ii=; fi; \
+ for file in $(INFO_DEPS); do \
+ test -z "$ii" \
+ || install-info --info-dir=$(DESTDIR)$(infodir) --remove $$file; \
+ done
+ @$(NORMAL_UNINSTALL)
+ for file in $(INFO_DEPS); do \
+ (cd $(DESTDIR)$(infodir) && rm -f $$file $$file-[0-9] $$file-[0-9][0-9]); \
+ done
+
+dist-info: $(INFO_DEPS)
+ for base in $(INFO_DEPS); do \
+ if test -f $$base; then d=.; else d=$(srcdir); fi; \
+ for file in `cd $$d && eval echo $$base*`; do \
+ test -f $(distdir)/$$file \
+ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+ || cp -p $$d/$$file $(distdir)/$$file; \
+ done; \
+ done
+
+mostlyclean-aminfo:
+ -rm -f gprof.aux gprof.cp gprof.cps gprof.dvi gprof.fn gprof.fns \
+ gprof.ky gprof.kys gprof.ps gprof.log gprof.pg gprof.toc \
+ gprof.tp gprof.tps gprof.vr gprof.vrs gprof.op gprof.tr \
+ gprof.cv gprof.cn
+
+clean-aminfo:
+
+distclean-aminfo:
+
+maintainer-clean-aminfo:
+ for i in $(INFO_DEPS); do \
+ rm -f $$i; \
+ if test "`echo $$i-[0-9]*`" != "$$i-[0-9]*"; then \
+ rm -f $$i-[0-9]*; \
+ fi; \
+ done
+clean-info: mostlyclean-aminfo
+
+install-man1:
+ $(mkinstalldirs) $(DESTDIR)$(man1dir)
+ @list='$(man1_MANS)'; \
+ l2='$(man_MANS)'; for i in $$l2; do \
+ case "$$i" in \
+ *.1*) list="$$list $$i" ;; \
+ esac; \
+ done; \
+ for i in $$list; do \
+ if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
+ else file=$$i; fi; \
+ ext=`echo $$i | sed -e 's/^.*\\.//'`; \
+ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
+ inst=`echo $$inst | sed '$(transform)'`.$$ext; \
+ echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \
+ $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \
+ done
+
+uninstall-man1:
+ @list='$(man1_MANS)'; \
+ l2='$(man_MANS)'; for i in $$l2; do \
+ case "$$i" in \
+ *.1*) list="$$list $$i" ;; \
+ esac; \
+ done; \
+ for i in $$list; do \
+ ext=`echo $$i | sed -e 's/^.*\\.//'`; \
+ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
+ inst=`echo $$inst | sed '$(transform)'`.$$ext; \
+ echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \
+ rm -f $(DESTDIR)$(man1dir)/$$inst; \
+ done
+install-man: $(MANS)
+ @$(NORMAL_INSTALL)
+ $(MAKE) $(AM_MAKEFLAGS) install-man1
+uninstall-man:
+ @$(NORMAL_UNINSTALL)
+ $(MAKE) $(AM_MAKEFLAGS) uninstall-man1
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+
+@SET_MAKE@
+
+all-recursive install-data-recursive install-exec-recursive \
+installdirs-recursive install-recursive uninstall-recursive install-info-recursive \
+check-recursive installcheck-recursive info-recursive dvi-recursive:
+ @set fnord $(MAKEFLAGS); amf=$$2; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ target=`echo $@ | sed s/-recursive//`; \
+ echo "Making $$target in $$subdir"; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$target) \
+ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+ done && test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @set fnord $(MAKEFLAGS); amf=$$2; \
+ rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
+ rev="$$subdir $$rev"; \
+ done; \
+ for subdir in $$rev; do \
+ target=`echo $@ | sed s/-recursive//`; \
+ echo "Making $$target in $$subdir"; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$target) \
+ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+ done
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP)
+ here=`pwd` && cd $(srcdir) \
+ && mkid -f$$here/ID $(SOURCES) $(HEADERS) $(LISP)
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) gconfig.in $(TAGS_DEPENDENCIES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
+ done; \
+ list='$(SOURCES) $(HEADERS)'; \
+ unique=`for i in $$list; do echo $$i; done | \
+ awk ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(ETAGS_ARGS)gconfig.in$$unique$(LISP)$$tags" \
+ || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags gconfig.in $$unique $(LISP) -o $$here/TAGS)
+
+mostlyclean-tags:
+
+clean-tags:
+
+distclean-tags:
+ -rm -f TAGS ID
+
+maintainer-clean-tags:
+
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+
+# This target untars the dist file and tries a VPATH configuration. Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+ -rm -rf $(distdir)
+ GZIP=$(GZIP) $(TAR) zxf $(distdir).tar.gz
+ mkdir $(distdir)/=build
+ mkdir $(distdir)/=inst
+ dc_install_base=`cd $(distdir)/=inst && pwd`; \
+ cd $(distdir)/=build \
+ && ../configure --srcdir=.. --prefix=$$dc_install_base \
+ && $(MAKE) $(AM_MAKEFLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) dvi \
+ && $(MAKE) $(AM_MAKEFLAGS) check \
+ && $(MAKE) $(AM_MAKEFLAGS) install \
+ && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+ && $(MAKE) $(AM_MAKEFLAGS) dist
+ -rm -rf $(distdir)
+ @echo "========================"; \
+ echo "$(distdir).tar.gz is ready for distribution"; \
+ echo "========================"
+dist: distdir
+ -chmod -R a+r $(distdir)
+ GZIP=$(GZIP) $(TAR) chozf $(distdir).tar.gz $(distdir)
+ -rm -rf $(distdir)
+dist-all: distdir
+ -chmod -R a+r $(distdir)
+ GZIP=$(GZIP) $(TAR) chozf $(distdir).tar.gz $(distdir)
+ -rm -rf $(distdir)
+distdir: $(DISTFILES)
+ -rm -rf $(distdir)
+ mkdir $(distdir)
+ -chmod 777 $(distdir)
+ @for file in $(DISTFILES); do \
+ if test -f $$file; then d=.; else d=$(srcdir); fi; \
+ test -f $(distdir)/$$file \
+ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+ || cp -p $$d/$$file $(distdir)/$$file; \
+ done
+ for subdir in $(SUBDIRS); do \
+ test -d $(distdir)/$$subdir \
+ || mkdir $(distdir)/$$subdir \
+ || exit 1; \
+ chmod 777 $(distdir)/$$subdir; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
+ || exit 1; \
+ done
+ $(MAKE) $(AM_MAKEFLAGS) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-info
+info: $(INFO_DEPS) info-recursive
+dvi: $(DVIS) dvi-recursive
+check:
+ $(MAKE) $(AM_MAKEFLAGS) check-recursive
+installcheck: installcheck-recursive
+install-info: install-info-am install-info-recursive
+all-recursive-am: gconfig.h
+ $(MAKE) $(AM_MAKEFLAGS) all-recursive
+
+all-am: Makefile $(PROGRAMS) $(MANS) $(HEADERS) gconfig.h
+
+install-exec-am: install-binPROGRAMS
+
+install-data-am: install-man
+
+uninstall-am: uninstall-binPROGRAMS uninstall-man
+
+install-exec: install-exec-recursive install-exec-am
+ @$(NORMAL_INSTALL)
+
+install-data: install-data-recursive install-data-am
+ @$(NORMAL_INSTALL)
+
+install: install-recursive install-exec-am install-data-am
+ @:
+
+uninstall: uninstall-recursive uninstall-am
+
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' INSTALL_SCRIPT='$(INSTALL_PROGRAM)' install
+installdirs: installdirs-recursive
+ $(mkinstalldirs) $(DATADIR)$(bindir) $(DESTDIR)$(mandir)/man1
+
+
+mostlyclean-generic:
+ -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
+
+clean-generic:
+ -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+ -rm -f Makefile $(DISTCLEANFILES)
+ -rm -f config.cache config.log stamp-h stamp-h[0-9]*
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
+ -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
+mostlyclean-am: mostlyclean-hdr mostlyclean-binPROGRAMS \
+ mostlyclean-compile mostlyclean-libtool \
+ mostlyclean-aminfo mostlyclean-tags mostlyclean-generic
+
+clean-am: clean-hdr clean-binPROGRAMS clean-compile clean-libtool \
+ clean-aminfo clean-tags clean-generic mostlyclean-am
+
+distclean-am: distclean-hdr distclean-binPROGRAMS distclean-compile \
+ distclean-libtool distclean-aminfo distclean-tags \
+ distclean-generic clean-am
+
+maintainer-clean-am: maintainer-clean-hdr maintainer-clean-binPROGRAMS \
+ maintainer-clean-compile maintainer-clean-libtool \
+ maintainer-clean-aminfo maintainer-clean-tags \
+ maintainer-clean-generic distclean-am
+
+mostlyclean: mostlyclean-recursive mostlyclean-am
+
+clean: clean-recursive clean-am
+
+distclean: distclean-recursive distclean-am
+ -rm -f config.status
+ -rm -f libtool
+
+maintainer-clean: maintainer-clean-recursive maintainer-clean-am
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
+ -rm -f config.status
+
+.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \
+mostlyclean-binPROGRAMS distclean-binPROGRAMS clean-binPROGRAMS \
+maintainer-clean-binPROGRAMS uninstall-binPROGRAMS install-binPROGRAMS \
+mostlyclean-compile distclean-compile clean-compile \
+maintainer-clean-compile mostlyclean-libtool distclean-libtool \
+clean-libtool maintainer-clean-libtool install-info-am uninstall-info \
+mostlyclean-aminfo distclean-aminfo clean-aminfo \
+maintainer-clean-aminfo install-man1 uninstall-man1 install-man \
+uninstall-man install-data-recursive uninstall-data-recursive \
+install-exec-recursive uninstall-exec-recursive installdirs-recursive \
+uninstalldirs-recursive all-recursive check-recursive \
+installcheck-recursive info-recursive dvi-recursive \
+mostlyclean-recursive distclean-recursive clean-recursive \
+maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
+distclean-tags clean-tags maintainer-clean-tags distdir info dvi \
+installcheck install-info all-recursive-am all-am install-exec-am \
+install-data-am uninstall-am install-exec install-data install \
+uninstall all installdirs mostlyclean-generic distclean-generic \
+clean-generic maintainer-clean-generic clean mostlyclean distclean \
+maintainer-clean
+
+
+diststuff: $(BUILT_SOURCES) info
+
+.m.c:
+ awk -f $(srcdir)/gen-c-prog.awk > ./$*.c \
+ FUNCTION=`(echo $*|sed -e 's,.*/,,g' -e 's/_bl//')`_blurb \
+ FILE=$*.m $(srcdir)/$*.m
+po/POTFILES.in: @MAINT@ Makefile
+ for file in $(POTFILES); do echo $$file; done | sort > tmp \
+ && mv tmp $(srcdir)/po/POTFILES.in
+
+# Dependencies.
+$(OBJECTS): ../bfd/bfd.h call_graph.h cg_arcs.h cg_print.h \
+ corefile.h gmon_io.h gmon_out.h gprof.h hertz.h hist.h \
+ search_list.h source.h sym_ids.h symtab.h utils.h \
+ $(srcdir)/../include/libiberty.h $(srcdir)/../bfd/sysdep.h \
+ gconfig.h ../bfd/config.h
+basic_blocks.o: basic_blocks.c
+bsd_call_bl.o: bsd_call_bl.c
+call_graph.o: call_graph.c
+cg_arcs.o: cg_arcs.c
+cg_dfn.o: cg_dfn.c
+cg_print.o: cg_print.c
+corefile.o: corefile.c