+
+# List contains test-items with 3 items followed by 2 lists, one item and
+# one optional item:
+# 0:name
+# 1:ld or ar options
+# 2:compile options
+# 3:filenames of source files
+# 4:action and options.
+# 5:name of output file
+# 6:language (optional)
+#
+# Actions:
+# objdump: Apply objdump options on result. Compare with regex (last arg).
+# nm: Apply nm options on result. Compare with regex (last arg).
+# readelf: Apply readelf options on result. Compare with regex (last arg).
+#
+proc run_cc_link_tests { ldtests } {
+ global nm
+ global objdump
+ global READELF
+ global srcdir
+ global subdir
+ global env
+ global CC
+ global CXX
+ global CFLAGS
+ global CXXFLAGS
+ global ar
+
+ foreach testitem $ldtests {
+ set testname [lindex $testitem 0]
+ set ldflags [lindex $testitem 1]
+ set cflags [lindex $testitem 2]
+ set src_files [lindex $testitem 3]
+ set actions [lindex $testitem 4]
+ set binfile tmpdir/[lindex $testitem 5]
+ set lang [lindex $testitem 6]
+ set objfiles {}
+ set is_unresolved 0
+ set failed 0
+
+ # Compile each file in the test.
+ foreach src_file $src_files {
+ set objfile "tmpdir/[file rootname $src_file].o"
+ lappend objfiles $objfile
+
+ # We ignore warnings since some compilers may generate
+ # incorrect section attributes and the assembler will warn
+ # them.
+ if { [ string match "c++" $lang ] } {
+ ld_compile "$CXX -c $CXXFLAGS $cflags" $srcdir/$subdir/$src_file $objfile
+ } else {
+ ld_compile "$CC -c $CFLAGS $cflags" $srcdir/$subdir/$src_file $objfile
+ }
+ }
+
+ # Clear error and warning counts.
+ reset_vars
+
+ if { [ string match "c++" $lang ] } {
+ set cc_cmd $CXX
+ } else {
+ set cc_cmd $CC
+ }
+
+ if { [regexp ".*\\.a$" $binfile] } {
+ if { ![ar_simple_create $ar $ldflags $binfile "$objfiles"] } {
+ fail $testname
+ set failed 1
+ } else {
+ set failed 0
+ }
+ } elseif { ![ld_simple_link $cc_cmd $binfile "-L$srcdir/$subdir $ldflags $objfiles"] } {
+ fail $testname
+ set failed 1
+ } else {
+ set failed 0
+ }
+
+ if { $failed == 0 } {
+ foreach actionlist $actions {
+ set action [lindex $actionlist 0]
+ set progopts [lindex $actionlist 1]
+
+ # There are actions where we run regexp_diff on the
+ # output, and there are other actions (presumably).
+ # Handling of the former look the same.
+ set dump_prog ""
+ switch -- $action {
+ objdump
+ { set dump_prog $objdump }
+ nm
+ { set dump_prog $nm }
+ readelf
+ { set dump_prog $READELF }
+ default
+ {
+ perror "Unrecognized action $action"
+ set is_unresolved 1
+ break
+ }
+ }
+
+ if { $dump_prog != "" } {
+ set dumpfile [lindex $actionlist 2]
+ set binary $dump_prog
+
+ # Ensure consistent sorting of symbols
+ if {[info exists env(LC_ALL)]} {
+ set old_lc_all $env(LC_ALL)
+ }
+ set env(LC_ALL) "C"
+ set cmd "$binary $progopts $binfile > dump.out"
+ send_log "$cmd\n"
+ catch "exec $cmd" comp_output
+ if {[info exists old_lc_all]} {
+ set env(LC_ALL) $old_lc_all
+ } else {
+ unset env(LC_ALL)
+ }
+ set comp_output [prune_warnings $comp_output]
+
+ if ![string match "" $comp_output] then {
+ send_log "$comp_output\n"
+ set failed 1
+ break
+ }
+
+ if { [regexp_diff "dump.out" "$srcdir/$subdir/$dumpfile"] } then {
+ verbose "output is [file_contents "dump.out"]" 2
+ set failed 1
+ break
+ }
+ }
+ }
+
+ if { $failed != 0 } {
+ fail $testname
+ } else { if { $is_unresolved == 0 } {
+ pass $testname
+ } }
+ }
+
+ # Catch action errors.
+ if { $is_unresolved != 0 } {
+ unresolved $testname
+ continue
+ }
+ }
+}
+
+# Returns true if --gc-sections is supported on the target.
+
+proc check_gc_sections_available { } {
+ global gc_sections_available_saved
+ global ld
+
+ if {![info exists gc_sections_available_saved]} {
+ # Some targets don't support gc-sections despite whatever's
+ # advertised by ld's options.
+ if {[istarget arc-*-*]
+ || [istarget d30v-*-*]
+ || [istarget dlx-*-*]
+ || [istarget i960-*-*]
+ || [istarget or32-*-*]
+ || [istarget pj*-*-*]
+ || [istarget alpha-*-*]
+ || [istarget hppa64-*-*]
+ || [istarget i370-*-*]
+ || [istarget i860-*-*]
+ || [istarget ia64-*-*]
+ || [istarget mep-*-*]
+ || [istarget mn10200-*-*]
+ || [istarget *-*-cygwin]
+ || [istarget *-*-mingw*] } {
+ set gc_sections_available_saved 0
+ return 0
+ }
+
+ # elf2flt uses -q (--emit-relocs), which is incompatible with
+ # --gc-sections.
+ if { [board_info target exists ldflags]
+ && [regexp " -elf2flt\[ =\]" " [board_info target ldflags] "] } {
+ set gc_sections_available_saved 0
+ return 0
+ }
+
+ # Check if the ld used by gcc supports --gc-sections.
+ set ld_output [remote_exec host $ld "--help"]
+ if { [ string first "--gc-sections" $ld_output ] >= 0 } {
+ set gc_sections_available_saved 1
+ } else {
+ set gc_sections_available_saved 0
+ }
+ }
+ return $gc_sections_available_saved
+}
+
+# Returns true if the target ld supports the plugin API.
+proc check_plugin_api_available { } {
+ global plugin_api_available_saved
+ global ld
+ if {![info exists plugin_api_available_saved]} {
+ # Check if the ld used by gcc supports --plugin.
+ set ld_output [remote_exec host $ld "--help"]
+ if { [ string first "-plugin" $ld_output ] >= 0 } {
+ set plugin_api_available_saved 1
+ } else {
+ set plugin_api_available_saved 0
+ }
+ }
+ return $plugin_api_available_saved
+}
+
+# Check if the assembler supports CFI statements.
+
+proc check_as_cfi { } {
+ global check_as_cfi_result
+ global as
+ if [info exists check_as_cfi_result] {
+ return $check_as_cfi_result
+ }
+ set as_file "tmpdir/check_as_cfi.s"
+ set as_fh [open $as_file w 0666]
+ puts $as_fh "# Generated file. DO NOT EDIT"
+ puts $as_fh "\t.cfi_startproc"
+ puts $as_fh "\t.cfi_endproc"
+ close $as_fh
+ remote_download host $as_file
+ verbose -log "Checking CFI support:"
+ rename "perror" "check_as_cfi_perror"
+ proc perror { args } { }
+ set success [ld_assemble $as $as_file "/dev/null"]
+ rename "perror" ""
+ rename "check_as_cfi_perror" "perror"
+ #remote_file host delete $as_file
+ set check_as_cfi_result $success
+ return $success
+}
+
+# Provide virtual target "cfi" for targets supporting CFI.
+
+rename "istarget" "istarget_ld"
+proc istarget { target } {
+ if {$target == "cfi"} {
+ return [check_as_cfi]
+ }
+ return [istarget_ld $target]
+}