+ if test "$prev" = dlfiles; then
+ # This library was specified with -dlopen.
+ dlfiles="$dlfiles $arg"
+ prev=
+ elif test "$prev" = dlprefiles; then
+ # The library was specified with -dlpreopen.
+ dlprefiles="$dlprefiles $arg"
+ prev=
+ else
+ deplibs="$deplibs $arg"
+ fi
+ continue
+ ;;
+
+ # Some other compiler argument.
+ *)
+ # Unknown arguments in both finalize_command and compile_command need
+ # to be aesthetically quoted because they are evaled later.
+ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+ case $arg in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ arg="\"$arg\""
+ ;;
+ esac
+ ;;
+ esac # arg
+
+ # Now actually substitute the argument into the commands.
+ if test -n "$arg"; then
+ compile_command="$compile_command $arg"
+ finalize_command="$finalize_command $arg"
+ fi
+ done # argument parsing loop
+
+ if test -n "$prev"; then
+ $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+ fi
+
+ # Infer tagged configuration to use if any are available and
+ # if one wasn't chosen via the "--tag" command line option.
+ # Only attempt this if the compiler in the base link
+ # command doesn't match the default compiler.
+ if test -n "$available_tags" && test -z "$tagname"; then
+ case $base_compile in
+ "$CC "*) ;;
+ # Blanks in the command may have been stripped by the calling shell,
+ # but not from the CC environment variable when ltconfig was run.
+ "`$echo $CC` "*) ;;
+ *)
+ for z in $available_tags; do
+ if grep "^### BEGIN LIBTOOL TAG CONFIG: $z$" < "$0" > /dev/null; then
+ # Evaluate the configuration.
+ eval "`sed -n -e '/^### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^### END LIBTOOL TAG CONFIG: '$z'$/p' < $0`"
+ case $base_compile in
+ "$CC "*)
+ # The compiler in $compile_command matches
+ # the one in the tagged configuration.
+ # Assume this is the tagged configuration we want.
+ tagname=$z
+ break
+ ;;
+ "`$echo $CC` "*)
+ tagname=$z
+ break
+ ;;
+ esac
+ fi
+ done
+ # If $tagname still isn't set, then no tagged configuration
+ # was found and let the user know that the "--tag" command
+ # line option must be used.
+ if test -z "$tagname"; then
+ echo "$modename: unable to infer tagged configuration"
+ echo "$modename: specify a tag with \`--tag'" 1>&2
+ exit 1
+# else
+# echo "$modename: using $tagname tagged configuration"
+ fi
+ ;;
+ esac
+ fi
+
+ if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+ eval arg=\"$export_dynamic_flag_spec\"
+ compile_command="$compile_command $arg"
+ finalize_command="$finalize_command $arg"
+ fi
+
+ # calculate the name of the file, without its directory
+ outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
+ libobjs_save="$libobjs"
+
+ if test -n "$shlibpath_var"; then
+ # get the directories listed in $shlibpath_var
+ eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
+ else
+ shlib_search_path=
+ fi
+ eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
+ eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+
+ output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
+ if test "X$output_objdir" = "X$output"; then
+ output_objdir="$objdir"
+ else
+ output_objdir="$output_objdir/$objdir"
+ fi
+ # Create the object directory.
+ if test ! -d $output_objdir; then
+ $show "$mkdir $output_objdir"
+ $run $mkdir $output_objdir
+ status=$?
+ if test $status -ne 0 && test ! -d $output_objdir; then
+ exit $status
+ fi
+ fi
+
+ # Determine the type of output
+ case $output in
+ "")
+ $echo "$modename: you must specify an output file" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+ ;;
+ *.$libext) linkmode=oldlib ;;
+ *.lo | *.$objext) linkmode=obj ;;
+ *.la) linkmode=lib ;;
+ *) linkmode=prog ;; # Anything else should be a program.
+ esac
+
+ specialdeplibs=
+ libs=
+ # Find all interdependent deplibs by searching for libraries
+ # that are linked more than once (e.g. -la -lb -la)
+ for deplib in $deplibs; do
+ case "$libs " in
+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+ esac
+ libs="$libs $deplib"
+ done
+
+ if test $linkmode = lib; then
+ libs="$predeps $libs $compiler_lib_search_path $postdeps"
+
+ # Compute libraries that are listed more than once in $predeps
+ # $postdeps and mark them as special (i.e., whose duplicates are
+ # not to be eliminated).
+ pre_post_deps=
+ for pre_post_dep in $predeps $postdeps; do
+ case "$pre_post_deps " in
+ *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
+ esac
+ pre_post_deps="$pre_post_deps $pre_post_dep"
+ done
+ pre_post_deps=
+ fi
+
+ deplibs=
+ newdependency_libs=
+ newlib_search_path=
+ need_relink=no # whether we're linking any uninstalled libtool libraries
+ notinst_deplibs= # not-installed libtool libraries
+ notinst_path= # paths that contain not-installed libtool libraries
+ case $linkmode in
+ lib)
+ passes="conv link"
+ for file in $dlfiles $dlprefiles; do
+ case $file in
+ *.la) ;;
+ *)
+ $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
+ exit 1
+ ;;
+ esac
+ done
+ ;;
+ prog)
+ compile_deplibs=
+ finalize_deplibs=
+ alldeplibs=no
+ newdlfiles=
+ newdlprefiles=
+ passes="conv scan dlopen dlpreopen link"
+ ;;
+ *) passes="conv"
+ ;;
+ esac
+ for pass in $passes; do
+ if test $linkmode = prog; then
+ # Determine which files to process
+ case $pass in
+ dlopen)
+ libs="$dlfiles"
+ save_deplibs="$deplibs" # Collect dlpreopened libraries
+ deplibs=
+ ;;
+ dlpreopen) libs="$dlprefiles" ;;
+ link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
+ esac
+ fi
+ for deplib in $libs; do
+ lib=
+ found=no
+ case $deplib in
+ -l*)
+ if test $linkmode = oldlib && test $linkmode = obj; then
+ $echo "$modename: warning: \`-l' is ignored for archives/objects: $deplib" 1>&2
+ continue
+ fi
+ if test $pass = conv; then
+ deplibs="$deplib $deplibs"
+ continue
+ fi
+ name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
+ for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
+ # Search the libtool library
+ lib="$searchdir/lib${name}.la"
+ if test -f "$lib"; then
+ found=yes
+ break
+ fi
+ done
+ if test "$found" != yes; then
+ # deplib doesn't seem to be a libtool library
+ if test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ deplibs="$deplib $deplibs"
+ test $linkmode = lib && newdependency_libs="$deplib $newdependency_libs"
+ fi
+ continue
+ fi
+ ;; # -l
+ -L*)
+ case $linkmode in
+ lib)
+ deplibs="$deplib $deplibs"
+ test $pass = conv && continue
+ newdependency_libs="$deplib $newdependency_libs"
+ newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+ ;;
+ prog)
+ if test $pass = conv; then
+ deplibs="$deplib $deplibs"
+ continue
+ fi
+ if test $pass = scan; then
+ deplibs="$deplib $deplibs"
+ newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+ else
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ fi
+ ;;
+ *)
+ $echo "$modename: warning: \`-L' is ignored for archives/objects: $deplib" 1>&2
+ ;;
+ esac # linkmode
+ continue
+ ;; # -L
+ -R*)
+ if test $pass = link; then
+ dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
+ # Make sure the xrpath contains only unique directories.
+ case "$xrpath " in
+ *" $dir "*) ;;
+ *) xrpath="$xrpath $dir" ;;
+ esac
+ fi
+ deplibs="$deplib $deplibs"
+ continue
+ ;;
+ *.la) lib="$deplib" ;;
+ *.$libext)
+ if test $pass = conv; then
+ deplibs="$deplib $deplibs"
+ continue
+ fi
+ case $linkmode in
+ lib)
+ if test "$deplibs_check_method" != pass_all; then
+ echo
+ echo "*** Warning: This library needs some functionality provided by $deplib."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have."
+ else
+ echo
+ echo "*** Warning: Linking the shared library $output against the"
+ echo "*** static library $deplib is not portable!"
+ deplibs="$deplib $deplibs"
+ fi
+ continue
+ ;;
+ prog)
+ if test $pass != link; then
+ deplibs="$deplib $deplibs"
+ else
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ fi
+ continue
+ ;;
+ esac # linkmode
+ ;; # *.$libext
+ *.lo | *.$objext)
+ if test $pass = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+ # If there is no dlopen support or we're linking statically,
+ # we need to preload.
+ newdlprefiles="$newdlprefiles $deplib"
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ newdlfiles="$newdlfiles $deplib"
+ fi
+ continue
+ ;;
+ %DEPLIBS%)
+ alldeplibs=yes
+ continue
+ ;;
+ esac # case $deplib
+ if test $found = yes || test -f "$lib"; then :
+ else
+ $echo "$modename: cannot find the library \`$lib'" 1>&2
+ exit 1
+ fi
+
+ # Check to see that this really is a libtool archive.
+ if (sed -e '2q' $lib | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+ else
+ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+ exit 1
+ fi
+
+ ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
+ test "X$ladir" = "X$lib" && ladir="."
+
+ dlname=
+ dlopen=
+ dlpreopen=
+ libdir=
+ library_names=
+ old_library=
+ # If the library was installed with an old release of libtool,
+ # it will not redefine variable installed.
+ installed=yes
+
+ # Read the .la file
+ case $lib in
+ */* | *\\*) . $lib ;;
+ *) . ./$lib ;;
+ esac
+
+ if test "$linkmode,$pass" = "lib,link" ||
+ test "$linkmode,$pass" = "prog,scan" ||
+ { test $linkmode = oldlib && test $linkmode = obj; }; then
+ # Add dl[pre]opened files of deplib
+ test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
+ test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
+ fi
+
+ if test $pass = conv; then
+ # Only check for convenience libraries
+ deplibs="$lib $deplibs"
+ if test -z "$libdir"; then
+ if test -z "$old_library"; then
+ $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
+ exit 1
+ fi
+ # It is a libtool convenience library, so add in its objects.
+ convenience="$convenience $ladir/$objdir/$old_library"
+ old_convenience="$old_convenience $ladir/$objdir/$old_library"
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ deplibs="$deplib $deplibs"
+ case "$tmp_libs " in
+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+ esac
+ tmp_libs="$tmp_libs $deplib"
+ done
+ elif test $linkmode != prog && test $linkmode != lib; then
+ $echo "$modename: \`$lib' is not a convenience library" 1>&2
+ exit 1
+ fi
+ continue
+ fi # $pass = conv
+
+ # Get the name of the library we link against.
+ linklib=
+ for l in $old_library $library_names; do
+ linklib="$l"
+ done
+ if test -z "$linklib"; then
+ $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
+ exit 1
+ fi
+
+ # This library was specified with -dlopen.
+ if test $pass = dlopen; then
+ if test -z "$libdir"; then
+ $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
+ exit 1
+ fi
+ if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+ # If there is no dlname, no dlopen support or we're linking
+ # statically, we need to preload.
+ dlprefiles="$dlprefiles $lib"
+ else
+ newdlfiles="$newdlfiles $lib"
+ fi
+ continue
+ fi # $pass = dlopen
+
+ # We need an absolute path.
+ case $ladir in
+ [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
+ *)
+ abs_ladir=`cd "$ladir" && pwd`
+ if test -z "$abs_ladir"; then
+ $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2
+ $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
+ abs_ladir="$ladir"
+ fi
+ ;;
+ esac
+ laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+
+ # Find the relevant object directory and library name.
+ if test "X$installed" = Xyes; then
+ if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+ $echo "$modename: warning: library \`$lib' was moved." 1>&2
+ dir="$ladir"
+ absdir="$abs_ladir"
+ libdir="$abs_ladir"
+ else
+ dir="$libdir"
+ absdir="$libdir"
+ fi
+ else
+ dir="$ladir/$objdir"
+ absdir="$abs_ladir/$objdir"
+ # Remove this search path later
+ notinst_path="$notinst_path $abs_ladir"
+ fi # $installed = yes
+ name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+
+ # This library was specified with -dlpreopen.
+ if test $pass = dlpreopen; then
+ if test -z "$libdir"; then
+ $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
+ exit 1
+ fi
+ # Prefer using a static library (so that no silly _DYNAMIC symbols
+ # are required to link).
+ if test -n "$old_library"; then
+ newdlprefiles="$newdlprefiles $dir/$old_library"
+ # Otherwise, use the dlname, so that lt_dlopen finds it.
+ elif test -n "$dlname"; then
+ newdlprefiles="$newdlprefiles $dir/$dlname"
+ else
+ newdlprefiles="$newdlprefiles $dir/$linklib"
+ fi
+ fi # $pass = dlpreopen
+
+ if test -z "$libdir"; then
+ # Link the convenience library
+ if test $linkmode = lib; then
+ deplibs="$dir/$old_library $deplibs"
+ elif test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$dir/$old_library $compile_deplibs"
+ finalize_deplibs="$dir/$old_library $finalize_deplibs"
+ else
+ deplibs="$lib $deplibs"
+ fi
+ continue
+ fi
+
+ if test $linkmode = prog && test $pass != link; then
+ newlib_search_path="$newlib_search_path $ladir"
+ deplibs="$lib $deplibs"
+
+ linkalldeplibs=no
+ if test "$link_all_deplibs" != no || test -z "$library_names" ||
+ test "$build_libtool_libs" = no; then
+ linkalldeplibs=yes
+ fi
+
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ case $deplib in
+ -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
+ esac
+ # Need to link against all dependency_libs?
+ if test $linkalldeplibs = yes; then
+ deplibs="$deplib $deplibs"
+ else
+ # Need to hardcode shared library paths
+ # or/and link against static libraries
+ newdependency_libs="$deplib $newdependency_libs"
+ fi
+ case "$tmp_libs " in
+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+ esac
+ tmp_libs="$tmp_libs $deplib"
+ done # for deplib
+ continue
+ fi # $linkmode = prog...
+
+ link_static=no # Whether the deplib will be linked statically
+ if test -n "$library_names" &&
+ { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
+ # Link against this shared library
+
+ if test "$linkmode,$pass" = "prog,link" ||
+ { test $linkmode = lib && test $hardcode_into_libs = yes; }; then
+ # Hardcode the library path.
+ # Skip directories that are in the system default run-time
+ # search path.
+ case " $sys_lib_dlsearch_path " in
+ *" $absdir "*) ;;
+ *)
+ case "$compile_rpath " in
+ *" $absdir "*) ;;
+ *) compile_rpath="$compile_rpath $absdir"
+ esac
+ ;;
+ esac
+ case " $sys_lib_dlsearch_path " in
+ *" $libdir "*) ;;
+ *)
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) finalize_rpath="$finalize_rpath $libdir"
+ esac
+ ;;
+ esac
+ if test $linkmode = prog; then
+ # We need to hardcode the library path
+ if test -n "$shlibpath_var"; then
+ # Make sure the rpath contains only unique directories.
+ case "$temp_rpath " in
+ *" $dir "*) ;;
+ *" $absdir "*) ;;
+ *) temp_rpath="$temp_rpath $dir" ;;
+ esac
+ fi
+ fi
+ fi # $linkmode,$pass = prog,link...
+
+ if test "$alldeplibs" = yes &&
+ { test "$deplibs_check_method" = pass_all ||
+ { test "$build_libtool_libs" = yes &&
+ test -n "$library_names"; }; }; then
+ # We only need to search for static libraries
+ continue
+ fi
+
+ if test "$installed" = no; then
+ notinst_deplibs="$notinst_deplibs $lib"
+ need_relink=yes
+ fi
+
+ if test -n "$old_archive_from_expsyms_cmds"; then
+ # figure out the soname
+ set dummy $library_names
+ realname="$2"
+ shift; shift
+ libname=`eval \\$echo \"$libname_spec\"`
+ # use dlname if we got it. it's perfectly good, no?
+ if test -n "$dlname"; then
+ soname="$dlname"
+ elif test -n "$soname_spec"; then
+ # bleh windows
+ case $host in
+ *cygwin*)
+ major=`expr $current - $age`
+ versuffix="-$major"
+ ;;
+ esac
+ eval soname=\"$soname_spec\"
+ else
+ soname="$realname"
+ fi
+
+ # Make a new name for the extract_expsyms_cmds to use
+ soroot="$soname"
+ soname=`echo $soroot | sed -e 's/^.*\///'`
+ newlib="libimp-`echo $soname | sed 's/^lib//;s/\.dll$//'`.a"
+
+ # If the library has no export list, then create one now
+ if test -f "$output_objdir/$soname-def"; then :
+ else
+ $show "extracting exported symbol list from \`$soname'"
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+ eval cmds=\"$extract_expsyms_cmds\"
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+ done
+ IFS="$save_ifs"
+ fi
+
+ # Create $newlib
+ if test -f "$output_objdir/$newlib"; then :; else
+ $show "generating import library for \`$soname'"
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+ eval cmds=\"$old_archive_from_expsyms_cmds\"
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+ done
+ IFS="$save_ifs"
+ fi
+ # make sure the library variables are pointing to the new library
+ dir=$output_objdir
+ linklib=$newlib
+ fi # test -n $old_archive_from_expsyms_cmds
+
+ if test $linkmode = prog || test "$mode" != relink; then
+ add_shlibpath=
+ add_dir=
+ add=
+ lib_linked=yes
+ case $hardcode_action in
+ immediate | unsupported)
+ if test "$hardcode_direct" = no; then
+ add="$dir/$linklib"
+ elif test "$hardcode_minus_L" = no; then
+ case $host in
+ *-*-sunos*) add_shlibpath="$dir" ;;
+ esac
+ add_dir="-L$dir"
+ add="-l$name"
+ elif test "$hardcode_shlibpath_var" = no; then
+ add_shlibpath="$dir"
+ add="-l$name"
+ else
+ lib_linked=no
+ fi
+ ;;
+ relink)
+ if test "$hardcode_direct" = yes; then
+ add="$dir/$linklib"
+ elif test "$hardcode_minus_L" = yes; then
+ add_dir="-L$dir"
+ add="-l$name"
+ elif test "$hardcode_shlibpath_var" = yes; then
+ add_shlibpath="$dir"
+ add="-l$name"
+ else
+ lib_linked=no
+ fi
+ ;;
+ *) lib_linked=no ;;
+ esac
+
+ if test "$lib_linked" != yes; then
+ $echo "$modename: configuration error: unsupported hardcode properties"
+ exit 1
+ fi
+
+ if test -n "$add_shlibpath"; then
+ case :$compile_shlibpath: in
+ *":$add_shlibpath:"*) ;;
+ *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
+ esac
+ fi
+ if test $linkmode = prog; then
+ test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
+ test -n "$add" && compile_deplibs="$add $compile_deplibs"
+ else
+ test -n "$add_dir" && deplibs="$add_dir $deplibs"
+ test -n "$add" && deplibs="$add $deplibs"
+ if test "$hardcode_direct" != yes && \
+ test "$hardcode_minus_L" != yes && \
+ test "$hardcode_shlibpath_var" = yes; then
+ case :$finalize_shlibpath: in
+ *":$libdir:"*) ;;
+ *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+ esac
+ fi
+ fi
+ fi
+
+ if test $linkmode = prog || test "$mode" = relink; then
+ add_shlibpath=
+ add_dir=
+ add=
+ # Finalize command for both is simple: just hardcode it.
+ if test "$hardcode_direct" = yes; then
+ add="$libdir/$linklib"
+ elif test "$hardcode_minus_L" = yes; then
+ add_dir="-L$libdir"
+ add="-l$name"
+ elif test "$hardcode_shlibpath_var" = yes; then
+ case :$finalize_shlibpath: in
+ *":$libdir:"*) ;;
+ *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+ esac
+ add="-l$name"
+ else
+ # We cannot seem to hardcode it, guess we'll fake it.
+ add_dir="-L$libdir"
+ add="-l$name"
+ fi
+
+ if test $linkmode = prog; then
+ test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
+ test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
+ else
+ test -n "$add_dir" && deplibs="$add_dir $deplibs"
+ test -n "$add" && deplibs="$add $deplibs"
+ fi
+ fi
+ elif test $linkmode = prog; then
+ if test "$alldeplibs" = yes &&
+ { test "$deplibs_check_method" = pass_all ||
+ { test "$build_libtool_libs" = yes &&
+ test -n "$library_names"; }; }; then
+ # We only need to search for static libraries
+ continue
+ fi
+
+ # Try to link the static library
+ # Here we assume that one of hardcode_direct or hardcode_minus_L
+ # is not unsupported. This is valid on all known static and
+ # shared platforms.
+ if test "$hardcode_direct" != unsupported; then
+ test -n "$old_library" && linklib="$old_library"
+ compile_deplibs="$dir/$linklib $compile_deplibs"
+ finalize_deplibs="$dir/$linklib $finalize_deplibs"
+ else
+ compile_deplibs="-l$name -L$dir $compile_deplibs"
+ finalize_deplibs="-l$name -L$dir $finalize_deplibs"
+ fi
+ elif test "$build_libtool_libs" = yes; then
+ # Not a shared library
+ if test "$deplibs_check_method" != pass_all; then
+ # We're trying link a shared library against a static one
+ # but the system doesn't support it.
+
+ # Just print a warning and add the library to dependency_libs so
+ # that the program can be linked against the static library.
+ echo
+ echo "*** Warning: This library needs some functionality provided by $lib."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have."
+ if test "$module" = yes; then
+ echo "*** Therefore, libtool will create a static module, that should work "
+ echo "*** as long as the dlopening application is linked with the -dlopen flag."
+ if test -z "$global_symbol_pipe"; then
+ echo
+ echo "*** However, this would only work if libtool was able to extract symbol"
+ echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+ echo "*** not find such a program. So, this module is probably useless."
+ echo "*** \`nm' from GNU binutils and a full rebuild may help."
+ fi
+ if test "$build_old_libs" = no; then
+ build_libtool_libs=module
+ build_old_libs=yes
+ else
+ build_libtool_libs=no
+ fi
+ fi
+ else
+ convenience="$convenience $dir/$old_library"
+ old_convenience="$old_convenience $dir/$old_library"
+ deplibs="$dir/$old_library $deplibs"
+ link_static=yes
+ fi
+ fi # link shared/static library?
+
+ if test $linkmode = lib; then
+ if test -n "$dependency_libs" &&
+ { test $hardcode_into_libs != yes || test $build_old_libs = yes ||
+ test $link_static = yes; }; then
+ # Extract -R from dependency_libs
+ temp_deplibs=
+ for libdir in $dependency_libs; do
+ case $libdir in
+ -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'`
+ case " $xrpath " in
+ *" $temp_xrpath "*) ;;
+ *) xrpath="$xrpath $temp_xrpath";;
+ esac;;
+ *) temp_deplibs="$temp_deplibs $libdir";;
+ esac
+ done
+ dependency_libs="$temp_deplibs"
+ fi
+
+ newlib_search_path="$newlib_search_path $absdir"
+ # Link against this library
+ test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+ # ... and its dependency_libs
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ newdependency_libs="$deplib $newdependency_libs"
+ case "$tmp_libs " in
+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+ esac
+ tmp_libs="$tmp_libs $deplib"
+ done
+
+ if test $link_all_deplibs != no; then
+ # Add the search paths of all dependency libraries
+ for deplib in $dependency_libs; do
+ case $deplib in
+ -L*) path="$deplib" ;;
+ *.la)
+ dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'`
+ test "X$dir" = "X$deplib" && dir="."
+ # We need an absolute path.
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
+ *)
+ absdir=`cd "$dir" && pwd`
+ if test -z "$absdir"; then
+ $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
+ absdir="$dir"
+ fi
+ ;;
+ esac
+ if grep "^installed=no" $deplib > /dev/null; then
+ path="-L$absdir/$objdir"
+ else
+ eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+ if test -z "$libdir"; then
+ $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
+ exit 1
+ fi
+ if test "$absdir" != "$libdir"; then
+ $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
+ fi
+ path="-L$absdir"
+ fi
+ ;;
+ *) continue ;;
+ esac
+ case " $deplibs " in
+ *" $path "*) ;;
+ *) deplibs="$path $deplibs" ;;
+ esac
+ done
+ fi # link_all_deplibs != no
+ fi # linkmode = lib
+ done # for deplib in $libs
+ if test $pass = dlpreopen; then
+ # Link the dlpreopened libraries before other libraries
+ for deplib in $save_deplibs; do
+ deplibs="$deplib $deplibs"
+ done
+ fi
+ if test $pass != dlopen; then
+ test $pass != scan && dependency_libs="$newdependency_libs"
+ if test $pass != conv; then
+ # Make sure lib_search_path contains only unique directories.
+ lib_search_path=
+ for dir in $newlib_search_path; do
+ case "$lib_search_path " in
+ *" $dir "*) ;;
+ *) lib_search_path="$lib_search_path $dir" ;;
+ esac
+ done
+ newlib_search_path=
+ fi
+
+ if test "$linkmode,$pass" != "prog,link"; then
+ vars="deplibs"
+ else
+ vars="compile_deplibs finalize_deplibs"
+ fi
+ for var in $vars dependency_libs; do
+ # Add libraries to $var in reverse order
+ eval tmp_libs=\"\$$var\"
+ new_libs=
+ for deplib in $tmp_libs; do
+ case $deplib in
+ -L*) new_libs="$deplib $new_libs" ;;
+ *)
+ case " $specialdeplibs " in
+ *" $deplib "*) new_libs="$deplib $new_libs" ;;
+ *)
+ case " $new_libs " in
+ *" $deplib "*) ;;
+ *) new_libs="$deplib $new_libs" ;;
+ esac
+ ;;
+ esac
+ ;;
+ esac
+ done
+ tmp_libs=
+ for deplib in $new_libs; do
+ case $deplib in
+ -L*)
+ case " $tmp_libs " in
+ *" $deplib "*) ;;
+ *) tmp_libs="$tmp_libs $deplib" ;;
+ esac
+ ;;
+ *) tmp_libs="$tmp_libs $deplib" ;;
+ esac
+ done
+ eval $var=\"$tmp_libs\"
+ done # for var
+ fi
+ if test "$pass" = "conv" &&
+ { test "$linkmode" = "lib" || test "$linkmode" = "prog"; }; then
+ libs="$deplibs" # reset libs
+ deplibs=
+ fi
+ done # for pass
+ if test $linkmode = prog; then
+ dlfiles="$newdlfiles"
+ dlprefiles="$newdlprefiles"
+ fi
+
+ case $linkmode in
+ oldlib)
+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+ $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
+ fi
+
+ if test -n "$rpath"; then
+ $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
+ fi
+
+ if test -n "$xrpath"; then
+ $echo "$modename: warning: \`-R' is ignored for archives" 1>&2
+ fi
+
+ if test -n "$vinfo"; then
+ $echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2
+ fi
+
+ if test -n "$release"; then
+ $echo "$modename: warning: \`-release' is ignored for archives" 1>&2
+ fi
+
+ if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+ $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
+ fi
+
+ # Now set the variables for building old libraries.
+ build_libtool_libs=no
+ oldlibs="$output"
+ objs="$objs$old_deplibs"
+ ;;
+
+ lib)
+ # Make sure we only generate libraries of the form `libNAME.la'.
+ case $outputname in
+ lib*)
+ name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+ eval libname=\"$libname_spec\"
+ ;;
+ *)
+ if test "$module" = no; then
+ $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+ fi
+ if test "$need_lib_prefix" != no; then
+ # Add the "lib" prefix for modules if required
+ name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+ eval libname=\"$libname_spec\"
+ else
+ libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+ fi
+ ;;
+ esac
+
+ if test -n "$objs"; then
+ if test "$deplibs_check_method" != pass_all; then
+ $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
+ exit 1
+ else
+ echo
+ echo "*** Warning: Linking the shared library $output against the non-libtool"
+ echo "*** objects $objs is not portable!"
+ libobjs="$libobjs $objs"
+ fi
+ fi
+
+ if test "$dlself" != no; then
+ $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2
+ fi
+
+ set dummy $rpath
+ if test $# -gt 2; then
+ $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
+ fi
+ install_libdir="$2"
+
+ oldlibs=
+ if test -z "$rpath"; then
+ if test "$build_libtool_libs" = yes; then
+ # Building a libtool convenience library.
+ # Some compilers have problems with a `.al' extension so
+ # convenience libraries should have the same extension an
+ # archive normally would.
+ oldlibs="$output_objdir/$libname.$libext $oldlibs"
+ build_libtool_libs=convenience
+ build_old_libs=yes
+ fi
+
+ if test -n "$vinfo"; then
+ $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2
+ fi
+
+ if test -n "$release"; then
+ $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
+ fi
+ else
+
+ # Parse the version information argument.
+ IFS="${IFS= }"; save_ifs="$IFS"; IFS=':'
+ set dummy $vinfo 0 0 0
+ IFS="$save_ifs"
+
+ if test -n "$8"; then
+ $echo "$modename: too many parameters to \`-version-info'" 1>&2
+ $echo "$help" 1>&2
+ exit 1
+ fi
+
+ current="$2"
+ revision="$3"
+ age="$4"
+
+ # Check that each of the things are valid numbers.
+ case $current in
+ 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
+ *)
+ $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2
+ $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+ exit 1
+ ;;
+ esac
+
+ case $revision in
+ 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
+ *)
+ $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2
+ $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+ exit 1
+ ;;
+ esac
+
+ case $age in
+ 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
+ *)
+ $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
+ $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+ exit 1
+ ;;
+ esac
+
+ if test $age -gt $current; then
+ $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
+ $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+ exit 1
+ fi
+
+ # Calculate the version variables.
+ major=
+ versuffix=
+ verstring=
+ case $version_type in
+ none) ;;
+
+ darwin)
+ # Like Linux, but with the current version available in
+ # verstring for coding it into the library header
+ major=.`expr $current - $age`
+ versuffix="$major.$age.$revision"
+ # Darwin ld doesn't like 0 for these options...
+ minor_current=`expr $current + 1`
+ verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+ ;;
+
+ freebsd-aout)
+ major=".$current"
+ versuffix=".$current.$revision";
+ ;;
+
+ freebsd-elf)
+ major=".$current"
+ versuffix=".$current";
+ ;;
+
+ irix)
+ major=`expr $current - $age + 1`
+ verstring="sgi$major.$revision"
+
+ # Add in all the interfaces that we are compatible with.
+ loop=$revision
+ while test $loop != 0; do
+ iface=`expr $revision - $loop`
+ loop=`expr $loop - 1`
+ verstring="sgi$major.$iface:$verstring"
+ done
+
+ # Before this point, $major must not contain `.'.
+ major=.$major
+ versuffix="$major.$revision"
+ ;;
+
+ linux)
+ major=.`expr $current - $age`
+ versuffix="$major.$age.$revision"
+ ;;
+
+ osf)
+ major=`expr $current - $age`
+ versuffix=".$current.$age.$revision"
+ verstring="$current.$age.$revision"
+
+ # Add in all the interfaces that we are compatible with.
+ loop=$age
+ while test $loop != 0; do
+ iface=`expr $current - $loop`
+ loop=`expr $loop - 1`
+ verstring="$verstring:${iface}.0"
+ done
+
+ # Make executables depend on our current version.
+ verstring="$verstring:${current}.0"
+ ;;
+
+ sunos)
+ major=".$current"
+ versuffix=".$current.$revision"
+ ;;
+
+ windows)
+ # Use '-' rather than '.', since we only want one
+ # extension on DOS 8.3 filesystems.
+ major=`expr $current - $age`
+ versuffix="-$major"
+ ;;
+
+ *)
+ $echo "$modename: unknown library version type \`$version_type'" 1>&2
+ echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
+ exit 1
+ ;;
+ esac
+
+ # Clear the version info if we defaulted, and they specified a release.
+ if test -z "$vinfo" && test -n "$release"; then
+ major=
+ verstring="0.0"
+ if test "$need_version" = no; then
+ versuffix=
+ else
+ versuffix=".0.0"
+ fi
+ fi
+
+ # Remove version info from name if versioning should be avoided
+ if test "$avoid_version" = yes && test "$need_version" = no; then
+ major=
+ versuffix=
+ verstring=""
+ fi
+
+ # Check to see if the archive will have undefined symbols.
+ if test "$allow_undefined" = yes; then
+ if test "$allow_undefined_flag" = unsupported; then
+ $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
+ build_libtool_libs=no
+ build_old_libs=yes
+ fi
+ else
+ # Don't allow undefined symbols.
+ allow_undefined_flag="$no_undefined_flag"
+ fi
+ fi
+
+ if test "$mode" != relink; then
+ # Remove our outputs, but don't remove object files since they
+ # may have been created when compiling PIC objects.
+ removelist=
+ tempremovelist=`echo "$output_objdir/*"`
+ for p in $tempremovelist; do
+ case $p in
+ *.$objext)
+ ;;
+ $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
+ removelist="$removelist $p"
+ ;;
+ *) ;;
+ esac
+ done
+ if test -n "$removelist"; then
+ $show "${rm}r $removelist"
+ $run ${rm}r $removelist
+ fi
+ fi
+
+ # Now set the variables for building old libraries.
+ if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
+ oldlibs="$oldlibs $output_objdir/$libname.$libext"
+
+ # Transform .lo files to .o files.
+ oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
+ fi
+
+ # Eliminate all temporary directories.
+ for path in $notinst_path; do
+ lib_search_path=`echo "$lib_search_path " | sed -e 's% $path % %g'`
+ deplibs=`echo "$deplibs " | sed -e 's% -L$path % %g'`
+ dependency_libs=`echo "$dependency_libs " | sed -e 's% -L$path % %g'`
+ done
+
+ if test -n "$xrpath"; then
+ # If the user specified any rpath flags, then add them.
+ temp_xrpath=
+ for libdir in $xrpath; do
+ temp_xrpath="$temp_xrpath -R$libdir"
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) finalize_rpath="$finalize_rpath $libdir" ;;
+ esac
+ done
+ if test $hardcode_into_libs != yes || test $build_old_libs = yes; then
+ dependency_libs="$temp_xrpath $dependency_libs"
+ fi