- * ppc-dis.c: Don't include elf32-ppc.h, do include elf/ppc.h.
- (get_powerpc_dialect): Detect VLE sections from ELF sh_flags.
-
-2012-05-18 Alan Modra <amodra@gmail.com>
-
- * ia64-opc.c: Remove #include "ansidecl.h".
- * z8kgen.c: Include sysdep.h first.
-
- * arc-dis.c: Include sysdep.h first, remove some redundant includes.
- * bfin-dis.c: Likewise.
- * i860-dis.c: Likewise.
- * ia64-dis.c: Likewise.
- * ia64-gen.c: Likewise.
- * m68hc11-dis.c: Likewise.
- * mmix-dis.c: Likewise.
- * msp430-dis.c: Likewise.
- * or32-dis.c: Likewise.
- * rl78-dis.c: Likewise.
- * rx-dis.c: Likewise.
- * tic4x-dis.c: Likewise.
- * tilegx-opc.c: Likewise.
- * tilepro-opc.c: Likewise.
- * rx-decode.c: Regenerate.
-
-2012-05-17 James Lemke <jwlemke@codesourcery.com>
-
- * ppc-opc.c (powerpc_macros): Add entries for e_extlwi to e_clrlslwi.
-
-2012-05-17 James Lemke <jwlemke@codesourcery.com>
-
- * ppc-opc.c (extract_sprg): Use ALLOW8_SPRG to include VLE.
-
-2012-05-17 Daniel Richard G. <skunk@iskunk.org>
- Nick Clifton <nickc@redhat.com>
-
- PR 14072
- * configure.in: Add check that sysdep.h has been included before
- any system header files.
- * configure: Regenerate.
- * config.in: Regenerate.
- * sysdep.h: Generate an error if included before config.h.
- * alpha-opc.c: Include sysdep.h before any other header file.
- * alpha-dis.c: Likewise.
- * avr-dis.c: Likewise.
- * cgen-opc.c: Likewise.
- * cr16-dis.c: Likewise.
- * cris-dis.c: Likewise.
- * crx-dis.c: Likewise.
- * d10v-dis.c: Likewise.
- * d10v-opc.c: Likewise.
- * d30v-dis.c: Likewise.
- * d30v-opc.c: Likewise.
- * h8500-dis.c: Likewise.
- * i370-dis.c: Likewise.
- * i370-opc.c: Likewise.
- * m10200-dis.c: Likewise.
- * m10300-dis.c: Likewise.
- * micromips-opc.c: Likewise.
- * mips-opc.c: Likewise.
- * mips61-opc.c: Likewise.
- * moxie-dis.c: Likewise.
- * or32-opc.c: Likewise.
- * pj-dis.c: Likewise.
- * ppc-dis.c: Likewise.
- * ppc-opc.c: Likewise.
- * s390-dis.c: Likewise.
- * sh-dis.c: Likewise.
- * sh64-dis.c: Likewise.
- * sparc-dis.c: Likewise.
- * sparc-opc.c: Likewise.
- * spu-dis.c: Likewise.
- * tic30-dis.c: Likewise.
- * tic54x-dis.c: Likewise.
- * tic80-dis.c: Likewise.
- * tic80-opc.c: Likewise.
- * tilegx-dis.c: Likewise.
- * tilepro-dis.c: Likewise.
- * v850-dis.c: Likewise.
- * v850-opc.c: Likewise.
- * vax-dis.c: Likewise.
- * w65-dis.c: Likewise.
- * xgate-dis.c: Likewise.
- * xtensa-dis.c: Likewise.
- * rl78-decode.opc: Likewise.
- * rl78-decode.c: Regenerate.
- * rx-decode.opc: Likewise.
- * rx-decode.c: Regenerate.
-
-2012-05-17 Alan Modra <amodra@gmail.com>
-
- * ppc_dis.c: Don't include elf/ppc.h.
-
-2012-05-16 Meador Inge <meadori@codesourcery.com>
-
- * arm-dis.c (arm_opcodes): Don't disassemble STMFD/LDMIA sp!, {reg}
- to PUSH/POP {reg}.
-
-2012-05-15 James Murray <jsm@jsm-net.demon.co.uk>
- Stephane Carrez <stcarrez@nerim.fr>
-
- * configure.in: Add S12X and XGATE co-processor support to m68hc11
- target.
- * disassemble.c: Likewise.
- * configure: Regenerate.
- * m68hc11-dis.c: Make objdump output more consistent, use hex
- instead of decimal and use 0x prefix for hex.
- * m68hc11-opc.c: Add S12X and XGATE opcodes.
-
-2012-05-14 James Lemke <jwlemke@codesourcery.com>
-
- * ppc-dis.c (get_powerpc_dialect): Use is_ppc_vle.
- (PPC_OPCD_SEGS, VLE_OPCD_SEGS): New defines.
- (vle_opcd_indices): New array.
- (lookup_vle): New function.
- (disassemble_init_powerpc): Revise for second (VLE) opcode table.
- (print_insn_powerpc): Likewise.
- * ppc-opc.c: Likewise.
-
-2012-05-14 Catherine Moore <clm@codesourcery.com>
- Maciej W. Rozycki <macro@codesourcery.com>
- Rhonda Wittels <rhonda@codesourcery.com>
- Nathan Froyd <froydnj@codesourcery.com>
-
- * ppc-opc.c (insert_arx, extract_arx): New functions.
- (insert_ary, extract_ary): New functions.
- (insert_li20, extract_li20): New functions.
- (insert_rx, extract_rx): New functions.
- (insert_ry, extract_ry): New functions.
- (insert_sci8, extract_sci8): New functions.
- (insert_sci8n, extract_sci8n): New functions.
- (insert_sd4h, extract_sd4h): New functions.
- (insert_sd4w, extract_sd4w): New functions.
- (insert_vlesi, extract_vlesi): New functions.
- (insert_vlensi, extract_vlensi): New functions.
- (insert_vleui, extract_vleui): New functions.
- (insert_vleil, extract_vleil): New functions.
- (BI_MASK, BB_MASK, BT): Use PPC_OPERAND_CR_BIT.
- (BI16, BI32, BO32, B8): New.
- (B15, B24, CRD32, CRS): New.
- (CRD, OBF, BFA, CR, CRFS): Use PPC_OPERAND_CR_REG.
- (DB, IMM20, RD, Rx, ARX, RY, RZ): New.
- (ARY, SCLSCI8, SCLSCI8N, SE_SD, SE_SDH): New.
- (SH6_MASK): Use PPC_OPSHIFT_INV.
- (SI8, UI5, OIMM5, UI7, BO16): New.
- (VLESIMM, VLENSIMM, VLEUIMM, VLEUIMML): New.
- (XT6, XA6, XB6, XB6S, XC6): Use PPC_OPSHIFT_INV.
- (ALLOW8_SPRG): New.
- (insert_sprg, extract_sprg): Check ALLOW8_SPRG.
- (OPVUP, OPVUP_MASK OPVUP): New
- (BD8, BD8_MASK, BD8IO, BD8IO_MASK): New.
- (EBD8IO, EBD8IO1_MASK, EBD8IO2_MASK, EBD8IO3_MASK): New.
- (BD15, BD15_MASK, EBD15, EBD15_MASK, EBD15BI, EBD15BI_MASK): New.
- (BD24,BD24_MASK, C_LK, C_LK_MASK, C, C_MASK): New.
- (IA16, IA16_MASK, I16A, I16A_MASK, I16L, I16L_MASK): New.
- (IM7, IM7_MASK, LI20, LI20_MASK, SCI8, SCI8_MASK): New.
- (SCI8BF, SCI8BF_MASK, SD4, SD4_MASK): New.
- (SE_IM5, SE_IM5_MASK): New.
- (SE_R, SE_R_MASK, SE_RR, SE_RR_MASK): New.
- (EX, EX_MASK, BO16F, BO16T, BO32F, BO32T): New.
- (BO32DNZ, BO32DZ): New.
- (NO371, PPCSPE, PPCISEL, PPCEFS, MULHW): Include PPC_OPCODE_VLE.
- (PPCVLE): New.
- (powerpc_opcodes): Add new VLE instructions. Update existing
- instruction to include PPCVLE if supported.
- * ppc-dis.c (ppc_opts): Add vle entry.
- (get_powerpc_dialect): New function.
- (powerpc_init_dialect): VLE support.
- (print_insn_big_powerpc): Call get_powerpc_dialect.
- (print_insn_little_powerpc): Likewise.
- (operand_value_powerpc): Handle negative shift counts.
- (print_insn_powerpc): Handle 2-byte instruction lengths.
-
-2012-05-11 Daniel Richard G. <skunk@iskunk.org>
-
- PR binutils/14028
- * configure.in: Invoke ACX_HEADER_STRING.
- * configure: Regenerate.
- * config.in: Regenerate.
- * sysdep.h: If STRINGS_WITH_STRING is defined then include both
- string.h and strings.h.
-
-2012-05-11 Nick Clifton <nickc@redhat.com>
-
- PR binutils/14006
- * arm-dis.c (print_insn): Fix detection of instruction mode in
- files containing multiple executable sections.
-
-2012-05-03 Sean Keys <skeys@ipdatasys.com>
-
- * Makefile.in, configure: regenerate
- * disassemble.c (disassembler): Recognize ARCH_XGATE.
- * xgate-dis.c (read_memory, print_insn, print_insn_xgate):
- New functions.
- * configure.in: Recognize xgate.
- * xgate-dis.c, xgate-opc.c: New files for support of xgate
- * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
- and opcode generation for xgate.
-
-2012-04-30 DJ Delorie <dj@redhat.com>
-
- * rx-decode.opc (MOV): Do not sign-extend immediates which are
- already the maximum bit size.
- * rx-decode.c: Regenerate.
-
-2012-04-27 David S. Miller <davem@davemloft.net>
-
- * sparc-dis.c (v9a_asr_reg_names): Add 'cfr'.
- * sparc-opc.c (sparc_opcodes): Add rd/wr cases for %cfr.
-
- * sparc-opc.c (sparc_opcodes): Add 'wr X, %pause' and 'pause'.
- * sparc-dis.c (v9a_asr_reg_names): Add 'pause'.
-
- * sparc-opc.c (CBCOND): New define.
- (CBCOND_XCC): Likewise.
- (cbcond): New helper macro.
- (sparc_opcodes): Add compare-and-branch instructions.
-
- * sparc-dis.c (print_insn_sparc): Handle ')'.
- * sparc-opc.c (sparc_opcodes): Add crypto instructions.
-
- * sparc-opc.c (sparc_opcodes): Rework table to put HWCAP values
- into new struct sparc_opcode 'hwcaps' field instead of 'flags'.
-
-2012-04-12 David S. Miller <davem@davemloft.net>
-
- * sparc-dis.c (X_DISP10): Define.
- (print_insn_sparc): Handle '='.
-
-2012-04-01 Mike Frysinger <vapier@gentoo.org>
-
- * bfin-dis.c (fmtconst): Replace decimal handling with a single
- sprintf call and the '*' field width.
-
-2012-03-23 Maxim Kuvyrkov <maxim@codesourcery.com>
-
- * mips-dis.c (mips_arch_choices): Add entry for Broadcom XLP.
-
-2012-03-16 Alan Modra <amodra@gmail.com>
-
- * ppc-dis.c (PPC_OPC_SEGS, PPC_OP_TO_SEG): Delete.
- (powerpc_opcd_indices): Bump array size.
- (disassemble_init_powerpc): Set powerpc_opcd_indices entries
- corresponding to unused opcodes to following entry.
- (lookup_powerpc): New function, extracted and optimised from..
- (print_insn_powerpc): ..here.
-
-2012-03-15 Alan Modra <amodra@gmail.com>
- James Lemke <jwlemke@codesourcery.com>
-
- * disassemble.c (disassemble_init_for_target): Handle ppc init.
- * ppc-dis.c (private): New var.
- (powerpc_init_dialect): Don't return calloc failure, instead use
- private.
- (PPC_OPCD_SEGS, PPC_OP_TO_SEG): Define.
- (powerpc_opcd_indices): New array.
- (disassemble_init_powerpc): New function.
- (print_insn_big_powerpc): Don't init dialect here.
- (print_insn_little_powerpc): Likewise.
- (print_insn_powerpc): Start search using powerpc_opcd_indices.
-
-2012-03-10 Edmar Wienskoski <edmar@freescale.com>
-
- * ppc-dis.c (ppc_opts): Add entries for "e5500" and "e6500".
- * ppc-opc.c (insert_ls, TMR, ESYNC, XSYNCLE_MASK): New.
- (PPCVEC2, PPCTMR, E6500): New short names.
- (powerpc_opcodes): Add vabsdub, vabsduh, vabsduw, dni, mvidsplt,
- mviwsplt, icblq., mftmr, mttmr, dcblq., miso, lvexbx, lvexhx,
- lvexwx, stvexbx, stvexhx, stvexwx, lvepx, lvepxl, stvepx, stvepxl,
- lvtrx, lvtrxl, lvtlx, lvtlxl, stvfrx, stvfrxl, stvflx, stvflxl,
- lvswx, lvswxl, stvswx, stvswxl, lvsm mnemonics. Accept LS, ESYNC
- optional operands on sync instruction for E6500 target.
-
-2012-03-08 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
-
- * s390-opc.txt: Set instruction type of pku to SS_L2RDRD.
-
-2012-02-27 Alan Modra <amodra@gmail.com>
-
- * mt-dis.c: Regenerate.
-
-2012-02-27 Alan Modra <amodra@gmail.com>
-
- * v850-opc.c (extract_v8): Rearrange to make it obvious this
- is the inverse of corresponding insert function.
- (extract_d22, extract_u9, extract_r4): Likewise.
- (extract_d9): Correct sign extension.
- (extract_d16_15): Don't assume "long" is 32 bits, and don't
- rely on implementation defined behaviour for shift right of
- signed types.
- (extract_d16_16, extract_d17_16, extract_i9): Likewise.
- (extract_d23): Likewise, and correct mask.
-
-2012-02-27 Alan Modra <amodra@gmail.com>
-
- * crx-dis.c (print_arg): Mask constant to 32 bits.
- * crx-opc.c (cst4_map): Use int array.
-
-2012-02-27 Alan Modra <amodra@gmail.com>
-
- * arc-dis.c (BITS): Don't use shifts to mask off bits.
- (FIELDD): Sign extend with xor,sub.
-
-2012-02-25 Walter Lee <walt@tilera.com>
-
- * tilegx-opc.c: Handle TILEGX_OPC_LD4S_TLS and TILEGX_OPC_LD_TLS.
- * tilepro-opc.c: Handle TILEPRO_OPC_LW_TLS and
- TILEPRO_OPC_LW_TLS_SN.
-
-2012-02-21 H.J. Lu <hongjiu.lu@intel.com>
-
- * i386-opc.h (HLEPrefixNone): New.
- (HLEPrefixLock): Likewise.
- (HLEPrefixAny): Likewise.
- (HLEPrefixRelease): Likewise.
-
-2012-02-08 H.J. Lu <hongjiu.lu@intel.com>
-
- * i386-dis.c (HLE_Fixup1): New.
- (HLE_Fixup2): Likewise.
- (HLE_Fixup3): Likewise.
- (Ebh1): Likewise.
- (Evh1): Likewise.
- (Ebh2): Likewise.
- (Evh2): Likewise.
- (Ebh3): Likewise.
- (Evh3): Likewise.
- (MOD_C6_REG_7): Likewise.
- (MOD_C7_REG_7): Likewise.
- (RM_C6_REG_7): Likewise.
- (RM_C7_REG_7): Likewise.
- (XACQUIRE_PREFIX): Likewise.
- (XRELEASE_PREFIX): Likewise.
- (dis386): Use Ebh1/Evh1 on add, adc, and, btc, btr, bts,
- cmpxchg, dec, inc, neg, not, or, sbb, sub, xor and xadd. Use
- Ebh2/Evh2 on xchg. Use Ebh3/Evh3 on mov.
- (reg_table): Use Ebh1/Evh1 on add, adc, and, dec, inc, neg,
- not, or, sbb, sub and xor. Use Ebh3/Evh3 on mov. Use
- MOD_C6_REG_7 and MOD_C7_REG_7.
- (mod_table): Add MOD_C6_REG_7 and MOD_C7_REG_7.
- (rm_table): Add RM_C6_REG_7 and RM_C7_REG_7. Add xend and
- xtest.
- (prefix_name): Handle XACQUIRE_PREFIX and XRELEASE_PREFIX.
- (CMPXCHG8B_Fixup): Handle HLE prefix on cmpxchg8b.
-
- * i386-gen.c (cpu_flag_init): Add CPU_HLE_FLAGS and
- CPU_RTM_FLAGS.
- (cpu_flags): Add CpuHLE and CpuRTM.
- (opcode_modifiers): Add HLEPrefixOk.
-
- * i386-opc.h (CpuHLE): New.
- (CpuRTM): Likewise.
- (HLEPrefixOk): Likewise.
- (i386_cpu_flags): Add cpuhle and cpurtm.
- (i386_opcode_modifier): Add hleprefixok.
-
- * i386-opc.tbl: Add HLEPrefixOk=3 to mov. Add HLEPrefixOk to
- add, adc, and, btc, btr, bts, cmpxchg, dec, inc, neg, not, or,
- sbb, sub, xor and xadd. Add HLEPrefixOk=2 to xchg with memory
- operand. Add xacquire, xrelease, xabort, xbegin, xend and
- xtest.
- * i386-init.h: Regenerated.
- * i386-tbl.h: Likewise.
-
-2012-01-24 DJ Delorie <dj@redhat.com>
-
- * rl78-decode.opc (rl78_decode_opcode): Add NOT1.
- * rl78-decode.c: Regenerate.
-
-2012-01-17 James Murray <jsm@jsm-net.demon.co.uk>
-
- PR binutils/10173
- * cr16-dis.c (print_arg): Test symtab_size not num_symbols.
-
-2012-01-17 Andreas Schwab <schwab@linux-m68k.org>
-
- * m68k-opc.c (m68k_opcodes): Fix entries for pmove with BADx/BACx
- register and move them after pmove with PSR/PCSR register.
-
-2012-01-13 H.J. Lu <hongjiu.lu@intel.com>
-
- * i386-dis.c (mod_table): Add vmfunc.
-
- * i386-gen.c (cpu_flag_init): Add CPU_VMFUNC_FLAGS.
- (cpu_flags): CpuVMFUNC.
-
- * i386-opc.h (CpuVMFUNC): New.
- (i386_cpu_flags): Add cpuvmfunc.