+2011-12-13 Alan Modra <amodra@gmail.com>
+
+ * ppc-opc.c (ISA_V2): Define and use for relevant BO field tests.
+ (valid_bo_pre_v2, valid_bo_post_v2): New functions, extracted from..
+ (valid_bo): ..here. When disassembling, accept either 'y' or 'at'
+ type encoding on second pass.
+ (powerpc_opcodes): Use ISA_V2 to enable branch insns rather than
+ POWER4.
+ * ppc-dis.c (print_insn_powerpc): Delete dialect_orig. Instead
+ ignore deprecated on second pass.
+
+2011-12-08 Andrew Pinski <apinski@cavium.com>
+
+ * mips-opc.c (mips_builtin_opcodes): Add "pause".
+
+2011-12-08 Andrew Pinski <apinski@cavium.com>
+ Adam Nemet <anemet@caviumnetworks.com>
+
+ * mips-dis.c (mips_arch_choices): Add Octeon2.
+ For "octeon+", just include OcteonP for the insn.
+ * mips-opc.c (IOCT): Include Octeon2.
+ (IOCTP): Include Octeon2.
+ (IOCT2): New macro.
+ (mips_builtin_opcodes): Add "laa", "laad", "lac", "lacd", "lad",
+ "ladd", "lai", "laid", "las", "lasd", "law", "lawd".
+ Move "lbux", "ldx", "lhx", "lwx", and "lwux" up to where the standard
+ loads are, and add IOCT2 to them.
+ Add "lbx" and "lhux".
+ Add "qmac.00", "qmac.01", "qmac.02", "qmac.03", "qmacs.00",
+ "qmacs.01", "qmacs.01", "qmacs.02" and "qmacs.03".
+ Add "zcb" and "zcbt".
+
+2011-11-29 Andrew Pinski <apinski@cavium.com>
+
+ * mips-dis.c (mips_arch_choices): Add Octeon+.
+ * mips-opc.c (IOCT): Include Octeon+.
+ (IOCTP): New macro.
+ (mips_builtin_opcodes): Add "saa" and "saad".
+
+2011-11-25 Pierre Muller <muller@ics.u-strasbg.fr>
+
+ * mips-dis.c (print_insn_micromips): Rename local variable iprintf
+ to infprintf to avoid shadow warning.
+
+2011-11-25 Nick Clifton <nickc@redhat.com>
+
+ * po/it.po: Updated Italian translation.
+
+2011-11-16 Maciej W. Rozycki <macro@codesourcery.com>
+
+ * micromips-opc.c (micromips_opcodes): Use NODS rather than TRAP
+ for "alnv.ps".
+
+2011-11-02 Nick Clifton <nickc@redhat.com>
+
+ * po/it.po: New Italian translation.
+ * configure.in (ALL_LINGUAS): Add it.
+ * configure: Regenerate.
+ * po/opcodes.pot: Regenerate.
+
+2011-11-01 DJ Delorie <dj@redhat.com>
+
+ * Makefile.am (TARGET_LIBOPCODES_CFILES): Add rl78-decode.c and
+ rl78-dis.c.
+ (MAINTAINERCLEANFILES): Add rl78-decode.c.
+ (rl78-decode.c): New rule, built from rl78-decode.opc and opc2c.
+ * Makefile.in: Regenerate.
+ * configure.in: Add bfd_rl78_arch case.
+ * configure: Regenerate.
+ * disassemble.c: Define ARCH_rl78.
+ (disassembler): Add ARCH_rl78 case.
+ * rl78-decode.c: New file.
+ * rl78-decode.opc: New file.
+ * rl78-dis.c: New file.
+
+2011-10-27 Peter Bergner <bergner@vnet.ibm.com>
+
+ * ppc-opc.c (powerpc_opcodes) <drrndq, drrndq., dtstexq, dctqpq,
+ dctqpq., dctfixq, dctfixq., dxexq, dxexq., dtstsfq, dcffixq, dcffixq.,
+ diexq, diexq.>: Use FRT, FRA, FRB and FRBp repsectively on DFP quad
+ instructions.
+
+2011-10-26 Nick Clifton <nickc@redhat.com>
+
+ PR binutils/13348
+ * i386-dis.c (print_insn): Fix testing of array subscript.
+
+2011-10-26 Joern Rennecke <joern.rennecke@embecosm.com>
+
+ * disassemble.c (ARCH_epiphany): Move into alphasorted spot.
+ * epiphany-asm.c, epiphany-opc.h: Regenerate.
+
+2011-10-25 Joern Rennecke <joern.rennecke@embecosm.com>
+
+ * Makefile.am (HFILES): Add epiphany-desc.h and epiphany-opc.h .
+ (TARGET_LIBOPCODES_CFILES): Add epiphany-asm.c, epiphany-desc.c,
+ epiphany-dis.c, epiphany-ibld.c and epiphany-opc.c .
+ (CLEANFILES): Add stamp-epiphany.
+ (EPIPHANY_DEPS): Set. Make CGEN-generated Epiphany files depend on it.
+ (stamp-epiphany): New rule.
+ * configure.in: Handle bfd_epiphany_arch.
+ * disassemble.c (ARCH_epiphany): Define.
+ (disassembler): Handle bfd_arch_epiphany.
+ * epiphany-asm.c: New file.
+ * epiphany-desc.c: New file.
+ * epiphany-desc.h: New file.
+ * epiphany-dis.c: New file.
+ * epiphany-ibld.c: New file.
+ * epiphany-opc.c: New file.
+ * epiphany-opc.h: New file.
+ * Makefile.in: Regenerate.
+ * configure: Regenerate.
+ * po/POTFILES.in: Regenerate.
+ * po/opcodes.pot: Regenerate.
+
+2011-10-24 Julian Brown <julian@codesourcery.com>
+
+ * m68k-opc.c (m68k_opcodes): Fix entries for ColdFire moveml.
+
+2011-10-21 Jan Glauber <jang@linux.vnet.ibm.com>
+
+ * s390-opc.txt: Add CPUMF instructions.
+
+2011-10-18 Jie Zhang <jie@codesourcery.com>
+ Julian Brown <julian@codesourcery.com>
+
+ * arm-dis.c (print_insn_arm): Explicitly specify rotation if needed.
+
+2011-10-10 Nick Clifton <nickc@redhat.com>
+
+ * po/es.po: Updated Spanish translation.
+ * po/fi.po: Updated Finnish translation.
+
+2011-09-28 Jan Beulich <jbeulich@suse.com>
+
+ * ppc-opc.c (insert_nbi, insert_rbx, FRAp, FRBp, FRSp, FRTp, NBI, RAX,
+ RBX): New.
+ (insert_bo, insert_boe): Reject bcctr with bit 2 in bo unset.
+ (powerpc_opcodes): Use RAX for second and RBXC for third operand of
+ lswx. Use NBI for third operand of lswi. Use FRTp for first operand of
+ lfdp and lfdpx. Use FRSp for first operand of stfdp and stfdpx, and
+ mark them as invalid on POWER7. Use FRTp, FRAp, and FRBp repsectively
+ on DFP quad instructions.
+
+2011-09-27 David S. Miller <davem@davemloft.net>
+
+ * sparc-opc.c (sparc_opcodes): Fix random instruction to write
+ to a float instead of an integer register.
+
+2011-09-26 David S. Miller <davem@davemloft.net>
+
+ * sparc-opc.c (sparc_opcodes): Add integer multiply-add
+ instructions.
+
+2011-09-21 David S. Miller <davem@davemloft.net>
+
+ * sparc-opc.c (sparc_opcodes): Annotate table with HWCAP flag
+ bits. Fix "fchksm16" mnemonic.
+
+2011-09-08 Mark Fortescue <mark@mtfhpc.demon.co.uk>
+
+ The changes below bring 'mov' and 'ticc' instructions into line
+ with the V8 SPARC Architecture Manual.
+ * sparc-opc.c (sparc_opcodes): Add entry for 'ticc imm + regrs1'.
+ * sparc-opc.c (sparc_opcodes): Add alias entries for
+ 'mov regrs2,%asrX'; 'mov regrs2,%y'; 'mov regrs2,%prs';
+ 'mov regrs2,%wim' and 'mov regrs2,%tbr'.
+ * sparc-opc.c (sparc_opcodes): Move/Change entries for
+ 'mov imm,%asrX'; 'mov imm,%y'; 'mov imm,%prs'; 'mov imm,%wim'
+ and 'mov imm,%tbr'.
+ * sparc-opc.c (sparc_opcodes): Add wr alias entries to match above
+ mov aliases.
+
+ * sparc-opc.c (sparc_opcodes): Add entry for 'save simm13,regrs1,regrd'
+ This has been reported as being accepted by the Sun assmebler.
+
+2011-09-08 David S. Miller <davem@davemloft.net>
+
+ * sparc-opc.c (pdistn): Destination is integer not float register.
+
+2011-09-07 Andreas Schwab <schwab@linux-m68k.org>
+
+ PR gas/13145
+ * m68k-opc.c: Use "y" in moveml pattern for mcfisa_a.
+
+2011-08-26 Nick Clifton <nickc@redhat.com>
+
+ * po/es.po: Updated Spanish translation.
+
+2011-08-22 Nick Clifton <nickc@redhat.com>
+
+ * Makefile.am (CPUDIR): Redfine to point to top level cpu
+ directory.
+ (stamp-frv): Use CPUDIR.
+ (stamp-iq2000): Likewise.
+ (stamp-lm32): Likewise.
+ (stamp-m32c): Likewise.
+ (stamp-mt): Likewise.
+ (stamp-xc16x): Likewise.
+ * Makefile.in: Regenerate.
+
+2011-08-09 Chao-ying Fu <fu@mips.com>
+ Maciej W. Rozycki <macro@codesourcery.com>
+
+ * mips-dis.c (mips_arch_choices): Enable MCU for "mips32r2"
+ and "mips64r2".
+ (print_insn_args, print_insn_micromips): Handle MCU.
+ * micromips-opc.c (MC): New macro.
+ (micromips_opcodes): Add "aclr", "aset" and "iret".
+ * mips-opc.c (MC): New macro.
+ (mips_builtin_opcodes): Add "aclr", "aset" and "iret".
+
+2011-08-09 Maciej W. Rozycki <macro@codesourcery.com>
+
+ * micromips-opc.c (MOD_mb, MOD_mc, MOD_md): Remove macros.
+ (MOD_me, MOD_mf, MOD_mg, MOD_mhi, MOD_mj, MOD_ml): Likewise.
+ (MOD_mm, MOD_mn, MOD_mp, MOD_mq, MOD_sp): Likewise.
+ (WR_mb, RD_mc, RD_md, WR_md, RD_me, RD_mf, WR_mf): New macros.
+ (RD_mg, WR_mhi, RD_mj, WR_mj, RD_ml, RD_mmn): Likewise.
+ (RD_mp, WR_mp, RD_mq, RD_sp, WR_sp): Likewise.
+ (WR_s): Update macro.
+ (micromips_opcodes): Update register use flags of: "addiu",
+ "addiupc", "addiur1sp", "addiur2", "addius5", "addiusp", "addu",
+ "and", "andi", "beq", "beqz", "bne", "bnez", "di", "ei", "j",
+ "jalr", "jalrs", "jr", "jraddiusp", "jrc", "lbu", "lhu", "li",
+ "lui", "lw", "lwm", "mfhi", "mflo", "move", "movep", "not",
+ "nor", "or", "ori", "sb", "sh", "sll", "srl", "subu", "sw",
+ "swm" and "xor" instructions.
+
+2011-08-05 David S. Miller <davem@davemloft.net>
+
+ * sparc-dis.c (v9a_ast_reg_names): Add "cps".
+ (X_RS3): New macro.
+ (print_insn_sparc): Handle '4', '5', and '(' format codes.
+ Accept %asr numbers below 28.
+ * sparc-opc.c (sparc_opcodes): Add entries for HPC and VIS3
+ instructions.
+
+2011-08-02 Quentin Neill <quentin.neill@amd.com>
+
+ * i386-dis.c (xop_table): Remove spurious bextr insn.
+
+2011-08-01 H.J. Lu <hongjiu.lu@intel.com>
+
+ PR ld/13048
+ * i386-dis.c (print_insn): Optimize info->mach check.
+
+2011-08-01 H.J. Lu <hongjiu.lu@intel.com>
+
+ PR gas/13046
+ * i386-opc.tbl: Add Disp32S to 64bit call.
+ * i386-tbl.h: Regenerated.
+
+2011-07-24 Chao-ying Fu <fu@mips.com>
+ Maciej W. Rozycki <macro@codesourcery.com>
+
+ * micromips-opc.c: New file.
+ * mips-dis.c (micromips_to_32_reg_b_map): New array.
+ (micromips_to_32_reg_c_map, micromips_to_32_reg_d_map): Likewise.
+ (micromips_to_32_reg_e_map, micromips_to_32_reg_f_map): Likewise.
+ (micromips_to_32_reg_g_map, micromips_to_32_reg_l_map): Likewise.
+ (micromips_to_32_reg_q_map): Likewise.
+ (micromips_imm_b_map, micromips_imm_c_map): Likewise.
+ (micromips_ase): New variable.
+ (is_micromips): New function.
+ (set_default_mips_dis_options): Handle microMIPS ASE.
+ (print_insn_micromips): New function.
+ (is_compressed_mode_p): Likewise.
+ (_print_insn_mips): Handle microMIPS instructions.
+ * Makefile.am (CFILES): Add micromips-opc.c.
+ * configure.in (bfd_mips_arch): Add micromips-opc.lo.
+ * Makefile.in: Regenerate.
+ * configure: Regenerate.
+
+ * mips-dis.c (micromips_to_32_reg_h_map): New variable.
+ (micromips_to_32_reg_i_map): Likewise.
+ (micromips_to_32_reg_m_map): Likewise.
+ (micromips_to_32_reg_n_map): New macro.
+
+2011-07-24 Maciej W. Rozycki <macro@codesourcery.com>
+
+ * mips-opc.c (NODS): New macro.
+ (TRAP): Adjust for the rename of INSN_TRAP to INSN_NO_DELAY_SLOT.
+ (DSP_VOLA): Likewise.
+ (mips_builtin_opcodes): Add NODS annotation to "deret" and
+ "eret". Replace INSN_SYNC with NODS throughout. Use NODS in
+ place of TRAP for "wait", "waiti" and "yield".
+ * mips16-opc.c (NODS): New macro.
+ (TRAP): Adjust for the rename of INSN_TRAP to INSN_NO_DELAY_SLOT.
+ (mips16_opcodes): Use NODS in place of TRAP for "jalrc", "jrc",
+ "restore" and "save".
+
+2011-07-22 H.J. Lu <hongjiu.lu@intel.com>
+
+ * configure.in: Handle bfd_k1om_arch.
+ * configure: Regenerated.
+
+ * disassemble.c (disassembler): Handle bfd_k1om_arch.
+
+ * i386-dis.c (print_insn): Handle bfd_mach_k1om and
+ bfd_mach_k1om_intel_syntax.
+
+ * i386-gen.c (cpu_flag_init): Set CPU_UNKNOWN_FLAGS to
+ ~(CpuL1OM|CpuK1OM). Add CPU_K1OM_FLAGS.
+ (cpu_flags): Add CpuK1OM.
+
+ * i386-opc.h (CpuK1OM): New.
+ (i386_cpu_flags): Add cpuk1om.
+
+ * i386-init.h: Regenerated.
+ * i386-tbl.h: Likewise.
+
+2011-07-12 Nick Clifton <nickc@redhat.com>
+
+ * arm-dis.c (print_insn_arm): Revert previous, undocumented,
+ accidental change.
+
+2011-07-01 Nick Clifton <nickc@redhat.com>
+
+ PR binutils/12329
+ * avr-dis.c (avr_operand): Fix disassembly of ELPM, LPM and SPM
+ insns using post-increment addressing.
+
+2011-06-30 H.J. Lu <hongjiu.lu@intel.com>
+
+ * i386-dis.c (vex_len_table): Update rorxS.
+
+2011-06-30 H.J. Lu <hongjiu.lu@intel.com>
+
+ AVX Programming Reference (June, 2011)
+ * i386-dis.c (vex_len_table): Correct rorxS.
+
+ * i386-opc.tbl: Correct rorx.
+ * i386-tbl.h: Regenerated.
+
+2011-06-29 H.J. Lu <hongjiu.lu@intel.com>
+
+ * tilegx-opc.c (find_opcode): Replace "index" with "i".
+ * tilepro-opc.c (find_opcode): Likewise.
+
+2011-06-29 Richard Sandiford <rdsandiford@googlemail.com>
+
+ * mips16-opc.c (jalrc, jrc): Move earlier in file.
+
+2011-06-21 H.J. Lu <hongjiu.lu@intel.com>
+
+ * i386-dis.c (prefix_table): Re-indent PREFIX_VEX_0F388C and
+ PREFIX_VEX_0F388E.
+
+2011-06-17 Andreas Schwab <schwab@redhat.com>
+
+ * Makefile.am (MAINTAINERCLEANFILES): Move s390-opc.tab ...
+ (MOSTLYCLEANFILES): ... here.
+ * Makefile.in: Regenerate.
+
+2011-06-14 Alan Modra <amodra@gmail.com>
+
+ * Makefile.in: Regenerate.
+
+2011-06-13 Walter Lee <walt@tilera.com>
+
+ * Makefile.am (TARGET_LIBOPCODES_CFILES): Add tilegx-dis.c,
+ tilegx-opc.c, tilepro-dis.c, and tilepro-opc.c.
+ * Makefile.in: Regenerate.
+ * configure.in: Handle bfd_tilegx_arch and bfd_tilepro_arch.
+ * configure: Regenerate.
+ * disassemble.c (disassembler): Add ARCH_tilegx and ARCH_tilepro.
+ * po/POTFILES.in: Regenerate.
+ * tilegx-dis.c: New file.
+ * tilegx-opc.c: New file.
+ * tilepro-dis.c: New file.
+ * tilepro-opc.c: New file.
+
+2011-06-10 H.J. Lu <hongjiu.lu@intel.com>
+
+ AVX Programming Reference (June, 2011)
+ * i386-dis.c (XMGatherQ): New.
+ * i386-dis.c (EXxmm_mb): New.
+ (EXxmm_mb): Likewise.
+ (EXxmm_mw): Likewise.
+ (EXxmm_md): Likewise.
+ (EXxmm_mq): Likewise.
+ (EXxmmdw): Likewise.
+ (EXxmmqd): Likewise.
+ (VexGatherQ): Likewise.
+ (MVexVSIBDWpX): Likewise.
+ (MVexVSIBQWpX): Likewise.
+ (xmm_mb_mode): Likewise.
+ (xmm_mw_mode): Likewise.
+ (xmm_md_mode): Likewise.
+ (xmm_mq_mode): Likewise.
+ (xmmdw_mode): Likewise.
+ (xmmqd_mode): Likewise.
+ (ymmxmm_mode): Likewise.
+ (vex_vsib_d_w_dq_mode): Likewise.
+ (vex_vsib_q_w_dq_mode): Likewise.
+ (MOD_VEX_0F385A_PREFIX_2): Likewise.
+ (MOD_VEX_0F388C_PREFIX_2): Likewise.
+ (MOD_VEX_0F388E_PREFIX_2): Likewise.
+ (PREFIX_0F3882): Likewise.
+ (PREFIX_VEX_0F3816): Likewise.
+ (PREFIX_VEX_0F3836): Likewise.
+ (PREFIX_VEX_0F3845): Likewise.
+ (PREFIX_VEX_0F3846): Likewise.
+ (PREFIX_VEX_0F3847): Likewise.
+ (PREFIX_VEX_0F3858): Likewise.
+ (PREFIX_VEX_0F3859): Likewise.
+ (PREFIX_VEX_0F385A): Likewise.
+ (PREFIX_VEX_0F3878): Likewise.
+ (PREFIX_VEX_0F3879): Likewise.
+ (PREFIX_VEX_0F388C): Likewise.
+ (PREFIX_VEX_0F388E): Likewise.
+ (PREFIX_VEX_0F3890..PREFIX_VEX_0F3893): Likewise.
+ (PREFIX_VEX_0F38F5): Likewise.
+ (PREFIX_VEX_0F38F6): Likewise.
+ (PREFIX_VEX_0F3A00): Likewise.
+ (PREFIX_VEX_0F3A01): Likewise.
+ (PREFIX_VEX_0F3A02): Likewise.
+ (PREFIX_VEX_0F3A38): Likewise.
+ (PREFIX_VEX_0F3A39): Likewise.
+ (PREFIX_VEX_0F3A46): Likewise.
+ (PREFIX_VEX_0F3AF0): Likewise.
+ (VEX_LEN_0F3816_P_2): Likewise.
+ (VEX_LEN_0F3819_P_2): Likewise.
+ (VEX_LEN_0F3836_P_2): Likewise.
+ (VEX_LEN_0F385A_P_2_M_0): Likewise.
+ (VEX_LEN_0F38F5_P_0): Likewise.
+ (VEX_LEN_0F38F5_P_1): Likewise.
+ (VEX_LEN_0F38F5_P_3): Likewise.
+ (VEX_LEN_0F38F6_P_3): Likewise.
+ (VEX_LEN_0F38F7_P_1): Likewise.
+ (VEX_LEN_0F38F7_P_2): Likewise.
+ (VEX_LEN_0F38F7_P_3): Likewise.
+ (VEX_LEN_0F3A00_P_2): Likewise.
+ (VEX_LEN_0F3A01_P_2): Likewise.
+ (VEX_LEN_0F3A38_P_2): Likewise.
+ (VEX_LEN_0F3A39_P_2): Likewise.
+ (VEX_LEN_0F3A46_P_2): Likewise.
+ (VEX_LEN_0F3AF0_P_3): Likewise.
+ (VEX_W_0F3816_P_2): Likewise.
+ (VEX_W_0F3818_P_2): Likewise.
+ (VEX_W_0F3819_P_2): Likewise.
+ (VEX_W_0F3836_P_2): Likewise.
+ (VEX_W_0F3846_P_2): Likewise.
+ (VEX_W_0F3858_P_2): Likewise.
+ (VEX_W_0F3859_P_2): Likewise.
+ (VEX_W_0F385A_P_2_M_0): Likewise.
+ (VEX_W_0F3878_P_2): Likewise.
+ (VEX_W_0F3879_P_2): Likewise.
+ (VEX_W_0F3A00_P_2): Likewise.
+ (VEX_W_0F3A01_P_2): Likewise.
+ (VEX_W_0F3A02_P_2): Likewise.
+ (VEX_W_0F3A38_P_2): Likewise.
+ (VEX_W_0F3A39_P_2): Likewise.
+ (VEX_W_0F3A46_P_2): Likewise.
+ (MOD_VEX_0F3818_PREFIX_2): Removed.
+ (MOD_VEX_0F3819_PREFIX_2): Likewise.
+ (VEX_LEN_0F60_P_2..VEX_LEN_0F6D_P_2): Likewise.
+ (VEX_LEN_0F70_P_1..VEX_LEN_0F76_P_2): Likewise.
+ (VEX_LEN_0FD1_P_2..VEX_LEN_0FD5_P_2): Likewise.
+ (VEX_LEN_0FD7_P_2_M_1..VEX_LEN_0F3819_P_2_M_0): Likewise.
+ (VEX_LEN_0F381C_P_2..VEX_LEN_0F3840_P_2): Likewise.
+ (VEX_LEN_0F3A0E_P_2): Likewise.
+ (VEX_LEN_0F3A0F_P_2): Likewise.
+ (VEX_LEN_0F3A42_P_2): Likewise.
+ (VEX_LEN_0F3A4C_P_2): Likewise.
+ (VEX_W_0F3818_P_2_M_0): Likewise.
+ (VEX_W_0F3819_P_2_M_0): Likewise.
+ (prefix_table): Updated.
+ (three_byte_table): Likewise.
+ (vex_table): Likewise.
+ (vex_len_table): Likewise.
+ (vex_w_table): Likewise.
+ (mod_table): Likewise.
+ (putop): Handle "LW".
+ (intel_operand_size): Handle xmm_mb_mode, xmm_mw_mode,
+ xmm_md_mode, xmm_mq_mode, xmmdw_mode, xmmqd_mode, ymmxmm_mode,
+ vex_vsib_d_w_dq_mode, vex_vsib_q_w_dq_mode.
+ (OP_EX): Likewise.
+ (OP_E_memory): Handle vex_vsib_d_w_dq_mode and
+ vex_vsib_q_w_dq_mode.
+ (OP_XMM): Handle vex_vsib_q_w_dq_mode.
+ (OP_VEX): Likewise.
+
+ * i386-gen.c (cpu_flag_init): Add CpuAVX2 to CPU_ANY_SSE_FLAGS
+ and CPU_ANY_AVX_FLAGS. Add CPU_BMI2_FLAGS, CPU_LZCNT_FLAGS,
+ CPU_INVPCID_FLAGS and CPU_AVX2_FLAGS.
+ (cpu_flags): Add CpuAVX2, CpuBMI2, CpuLZCNT and CpuINVPCID.
+ (opcode_modifiers): Add VecSIB.
+
+ * i386-opc.h (CpuAVX2): New.
+ (CpuBMI2): Likewise.
+ (CpuLZCNT): Likewise.
+ (CpuINVPCID): Likewise.
+ (VecSIB128): Likewise.
+ (VecSIB256): Likewise.
+ (VecSIB): Likewise.
+ (i386_cpu_flags): Add cpuavx2, cpubmi2, cpulzcnt and cpuinvpcid.
+ (i386_opcode_modifier): Add vecsib.
+
+ * i386-opc.tbl: Add invpcid, AVX2 and BMI2 instructions.
+ * i386-init.h: Regenerated.
+ * i386-tbl.h: Likewise.
+
+2011-06-03 Quentin Neill <quentin.neill@amd.com>
+
+ * i386-gen.c (cpu_flag_init): Add CpuF16C to CPU_BDVER2_FLAGS.
+ * i386-init.h: Regenerated.
+
+2011-06-03 Nick Clifton <nickc@redhat.com>
+
+ PR binutils/12752
+ * arm-dis.c (print_insn_coprocessor): Use bfd_vma type for
+ computing address offsets.
+ (print_arm_address): Likewise.
+ (print_insn_arm): Likewise.
+ (print_insn_thumb16): Likewise.
+ (print_insn_thumb32): Likewise.
+
+2011-06-02 Jie Zhang <jie@codesourcery.com>
+ Nathan Sidwell <nathan@codesourcery.com>
+ Maciej Rozycki <macro@codesourcery.com>
+
+ * arm-dis.c (print_insn_coprocessor): Explicitly print #-0
+ as address offset.
+ (print_arm_address): Likewise. Elide positive #0 appropriately.
+ (print_insn_arm): Likewise.
+
+2011-06-02 Nick Clifton <nickc@redhat.com>
+
+ PR gas/12752
+ * arm-dis.c (print_insn_thumb32): Do not sign extend addresses
+ passed to print_address_func.
+
+2011-06-02 Nick Clifton <nickc@redhat.com>
+
+ * arm-dis.c: Fix spelling mistakes.
+ * op/opcodes.pot: Regenerate.
+
+2011-05-24 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
+
+ * s390-opc.c: Replace S390_OPERAND_REG_EVEN with
+ S390_OPERAND_REG_PAIR. Fix INSTR_RRF_0UFEF instruction type.
+ * s390-opc.txt: Fix cxr instruction type.
+
+2011-05-24 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
+
+ * s390-opc.c: Add new instruction types marking register pair
+ operands.
+ * s390-opc.txt: Match instructions having register pair operands
+ to the new instruction types.
+
+2011-05-19 Nick Clifton <nickc@redhat.com>
+
+ * v850-opc.c (cmpf.[sd]): Reverse the order of the reg1 and reg2
+ operands.
+
+2011-05-10 Quentin Neill <quentin.neill@amd.com>
+
+ * i386-gen.c (cpu_flag_init): Add new CPU_BDVER2_FLAGS.
+ * i386-init.h: Regenerated.
+
+2011-04-27 Nick Clifton <nickc@redhat.com>
+
+ * po/da.po: Updated Danish translation.
+
+2011-04-26 Anton Blanchard <anton@samba.org>
+
+ * ppc-opc.c: (powerpc_opcodes): Enable icswx for POWER7.
+
+2011-04-21 DJ Delorie <dj@redhat.com>
+
+ * rx-decode.opc (rx_decode_opcode): Set the syntax for multi-byte NOPs.
+ * rx-decode.c: Regenerate.
+
+2011-04-20 H.J. Lu <hongjiu.lu@intel.com>
+
+ * i386-init.h: Regenerated.
+
+2011-04-19 Quentin Neill <quentin.neill@amd.com>
+
+ * i386-gen.c (cpu_flag_init): Remove 3dnow and 3dnowa bits
+ from bdver1 flags.
+
+2011-04-13 Nick Clifton <nickc@redhat.com>
+
+ * v850-dis.c (disassemble): Always print a closing square brace if
+ an opening square brace was printed.
+
+2011-04-12 Nick Clifton <nickc@redhat.com>
+
+ PR binutils/12534
+ * arm-dis.c (thumb32_opcodes): Add %L suffix to LDRD and STRD insn
+ patterns.
+ (print_insn_thumb32): Handle %L.
+
+2011-04-11 Julian Brown <julian@codesourcery.com>
+
+ * arm-dis.c (psr_name): Fix typo for BASEPRI_MAX.
+ (print_insn_thumb32): Add APSR bitmask support.
+
+2011-04-07 Paul Carroll<pcarroll@codesourcery.com>
+
+ * arm-dis.c (print_insn): init vars moved into private_data structure.
+
+2011-03-24 Mike Frysinger <vapier@gentoo.org>
+
+ * bfin-dis.c (decode_dsp32mac_0): Move MM zeroing down to MAC0 logic.
+
+2011-03-22 Eric B. Weddington <eric.weddington@atmel.com>
+
+ * avr-dis.c (avr_operand): Add opcode_str parameter. Check for
+ post-increment to support LPM Z+ instruction. Add support for 'E'
+ constraint for DES instruction.
+ (print_insn_avr): Adjust calls to avr_operand. Rename variable.
+
+2011-03-14 Richard Sandiford <richard.sandiford@linaro.org>
+
+ * arm-dis.c (get_sym_code_type): Treat STT_GNU_IFUNCs as code.
+
+2011-03-14 Richard Sandiford <richard.sandiford@linaro.org>
+
+ * arm-dis.c (get_sym_code_type): Don't check for STT_ARM_TFUNC.
+ Use branch types instead.
+ (print_insn): Likewise.
+
+2011-02-28 Maciej W. Rozycki <macro@codesourcery.com>
+
+ * mips-opc.c (mips_builtin_opcodes): Correct register use
+ annotation of "alnv.ps".
+
+2011-02-28 Maciej W. Rozycki <macro@codesourcery.com>
+
+ * mips-opc.c (mips_builtin_opcodes): Add "pref" macro.
+
+2011-02-22 Mike Frysinger <vapier@gentoo.org>
+
+ * bfin-dis.c (OUTS): Remove p NULL check and txt NUL check.
+
+2011-02-22 Mike Frysinger <vapier@gentoo.org>
+
+ * bfin-dis.c (print_insn_bfin): Change outf->fprintf_func to OUTS.
+
+2011-02-19 Mike Frysinger <vapier@gentoo.org>
+
+ * bfin-dis.c (saved_state): Mark static. Change a[01]x to ax[] and
+ a[01]w to aw[]. Delete ac0, ac0_copy, ac1, an, aq, av0, av0s, av1,
+ av1s, az, cc, v, v_copy, vs, rnd_mod, v_internal, pc, ticks, insts,
+ exception, end_of_registers, msize, memory, bfd_mach.
+ (CCREG, PCREG, A0XREG, A0WREG, A1XREG, A1WREG, LC0REG, LT0REG,
+ LB0REG, LC1REG, LT1REG, LB1REG): Delete
+ (AXREG, AWREG, LCREG, LTREG, LBREG): Define.
+ (get_allreg): Change to new defines. Fallback to abort().
+