-dnl
-dnl Bash specific tests
-dnl
-dnl Some derived from PDKSH 5.1.3 autoconf tests
-dnl
-dnl
-dnl Check if dup2() does not clear the close on exec flag
-dnl
-AC_DEFUN(BASH_DUP2_CLOEXEC_CHECK,
-[AC_MSG_CHECKING(if dup2 fails to clear the close-on-exec flag)
-AC_CACHE_VAL(bash_cv_dup2_broken,
-[AC_TRY_RUN([
-#include <sys/types.h>
-#include <fcntl.h>
-main()
-{
- int fd1, fd2, fl;
- fd1 = open("/dev/null", 2);
- if (fcntl(fd1, 2, 1) < 0)
- exit(1);
- fd2 = dup2(fd1, 1);
- if (fd2 < 0)
- exit(2);
- fl = fcntl(fd2, 1, 0);
- /* fl will be 1 if dup2 did not reset the close-on-exec flag. */
- exit(fl != 1);
-}
-], bash_cv_dup2_broken=yes, bash_cv_dup2_broken=no,
- [AC_MSG_ERROR(cannot check dup2 if cross compiling -- defaulting to no)
- bash_cv_dup2_broken=no])
-])
-AC_MSG_RESULT($bash_cv_dup2_broken)
-if test $bash_cv_dup2_broken = yes; then
-AC_DEFINE(DUP2_BROKEN)
-fi
-])
-
-dnl Check type of signal routines (posix, 4.2bsd, 4.1bsd or v7)
-AC_DEFUN(BASH_SIGNAL_CHECK,
-[AC_REQUIRE([AC_TYPE_SIGNAL])
-AC_MSG_CHECKING(for type of signal functions)
-AC_CACHE_VAL(bash_cv_signal_vintage,
-[
- AC_TRY_LINK([#include <signal.h>],[
- sigset_t ss;
- struct sigaction sa;
- sigemptyset(&ss); sigsuspend(&ss);
- sigaction(SIGINT, &sa, (struct sigaction *) 0);
- sigprocmask(SIG_BLOCK, &ss, (sigset_t *) 0);
- ], bash_cv_signal_vintage=posix,
- [
- AC_TRY_LINK([#include <signal.h>], [
- int mask = sigmask(SIGINT);
- sigsetmask(mask); sigblock(mask); sigpause(mask);
- ], bash_cv_signal_vintage=4.2bsd,
- [
- AC_TRY_LINK([
- #include <signal.h>
- RETSIGTYPE foo() { }], [
- int mask = sigmask(SIGINT);
- sigset(SIGINT, foo); sigrelse(SIGINT);
- sighold(SIGINT); sigpause(SIGINT);
- ], bash_cv_signal_vintage=svr3, bash_cv_signal_vintage=v7
- )]
- )]
-)
-])
-AC_MSG_RESULT($bash_cv_signal_vintage)
-if test "$bash_cv_signal_vintage" = posix; then
-AC_DEFINE(HAVE_POSIX_SIGNALS)
-elif test "$bash_cv_signal_vintage" = "4.2bsd"; then
-AC_DEFINE(HAVE_BSD_SIGNALS)
-elif test "$bash_cv_signal_vintage" = svr3; then
-AC_DEFINE(HAVE_USG_SIGHOLD)
-fi
-])
-
-dnl Check if the pgrp of setpgrp() can't be the pid of a zombie process.
-AC_DEFUN(BASH_PGRP_SYNC,
-[AC_REQUIRE([AC_FUNC_GETPGRP])
-AC_MSG_CHECKING(whether pgrps need synchronization)
-AC_CACHE_VAL(bash_cv_pgrp_pipe,
-[AC_TRY_RUN([
-#ifdef HAVE_UNISTD_H
-# include <unistd.h>
-#endif
-main()
-{
-# ifdef GETPGRP_VOID
-# define getpgID() getpgrp()
-# else
-# define getpgID() getpgrp(0)
-# define setpgid(x,y) setpgrp(x,y)
-# endif
- int pid1, pid2, fds[2];
- int status;
- char ok;
-
- switch (pid1 = fork()) {
- case -1:
- exit(1);
- case 0:
- setpgid(0, getpid());
- exit(0);
- }
- setpgid(pid1, pid1);
-
- sleep(2); /* let first child die */
-
- if (pipe(fds) < 0)
- exit(2);
-
- switch (pid2 = fork()) {
- case -1:
- exit(3);
- case 0:
- setpgid(0, pid1);
- ok = getpgID() == pid1;
- write(fds[1], &ok, 1);
- exit(0);
- }
- setpgid(pid2, pid1);
-
- close(fds[1]);
- if (read(fds[0], &ok, 1) != 1)
- exit(4);
- wait(&status);
- wait(&status);
- exit(ok ? 0 : 5);
-}
-], bash_cv_pgrp_pipe=no,bash_cv_pgrp_pipe=yes,
- [AC_MSG_ERROR(cannot check pgrp synchronization if cross compiling -- defaulting to no)
- bash_cv_pgrp_pipe=no])
-])
-AC_MSG_RESULT($bash_cv_pgrp_pipe)
-if test $bash_cv_pgrp_pipe = yes; then
-AC_DEFINE(PGRP_PIPE)
-fi
-])
-
-dnl
-dnl check for typedef'd symbols in header files, but allow the caller to
-dnl specify the include files to be checked in addition to the default
-dnl
-dnl BASH_CHECK_TYPE(TYPE, HEADERS, DEFAULT[, VALUE-IF-FOUND])
-AC_DEFUN(BASH_CHECK_TYPE,
-[AC_REQUIRE([AC_HEADER_STDC])dnl
-AC_MSG_CHECKING(for $1)
-AC_CACHE_VAL(bash_cv_type_$1,
-[AC_EGREP_CPP($1, [#include <sys/types.h>
-#if STDC_HEADERS
-#include <stdlib.h>
-#endif
-$2
-], bash_cv_type_$1=yes, bash_cv_type_$1=no)])
-AC_MSG_RESULT($bash_cv_type_$1)
-ifelse($#, 4, [if test $bash_cv_type_$1 = yes; then
- AC_DEFINE($4)
- fi])
-if test $bash_cv_type_$1 = no; then
- AC_DEFINE($1, $3)
-fi
-])
-
-dnl
-dnl Type of struct rlimit fields: some systems (OSF/1, NetBSD, RISC/os 5.0)
-dnl have a rlim_t, others (4.4BSD based systems) use quad_t, others use
-dnl long and still others use int (HP-UX 9.01, SunOS 4.1.3). To simplify
-dnl matters, this just checks for rlim_t, quad_t, or long.
-dnl
-AC_DEFUN(BASH_RLIMIT_TYPE,
-[AC_MSG_CHECKING(for size and type of struct rlimit fields)
-AC_CACHE_VAL(bash_cv_type_rlimit,
-[AC_TRY_COMPILE([#include <sys/types.h>
-#include <sys/resource.h>],
-[rlim_t xxx;], bash_cv_type_rlimit=rlim_t,[
-AC_TRY_RUN([
-#include <sys/types.h>
-#include <sys/time.h>
-#include <sys/resource.h>
-main()
-{
-#ifdef HAVE_QUAD_T
- struct rlimit rl;
- if (sizeof(rl.rlim_cur) == sizeof(quad_t))
- exit(0);
-#endif
- exit(1);
-}], bash_cv_type_rlimit=quad_t, bash_cv_type_rlimit=long,
- [AC_MSG_ERROR(cannot check quad_t if cross compiling -- defaulting to long)
- bash_cv_type_rlimit=long])])
-])
-AC_MSG_RESULT($bash_cv_type_rlimit)
-if test $bash_cv_type_rlimit = quad_t; then
-AC_DEFINE(RLIMTYPE, quad_t)
-elif test $bash_cv_type_rlimit = rlim_t; then
-AC_DEFINE(RLIMTYPE, rlim_t)
-fi
-])
-
-dnl
-dnl Check for sys_siglist[] or _sys_siglist[]
-dnl
-AC_DEFUN(BASH_DECL_UNDER_SYS_SIGLIST,
-[AC_MSG_CHECKING([for _sys_siglist in signal.h or unistd.h])
-AC_CACHE_VAL(bash_cv_decl_under_sys_siglist,
-[AC_TRY_COMPILE([
-#include <sys/types.h>
-#include <signal.h>
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif], [ char *msg = _sys_siglist[2]; ],
- bash_cv_decl_under_sys_siglist=yes, bash_cv_decl_under_sys_siglist=no,
- [AC_MSG_ERROR(cannot check for _sys_siglist[] if cross compiling -- defaulting to no)])])dnl
-AC_MSG_RESULT($bash_cv_decl_under_sys_siglist)
-if test $bash_cv_decl_under_sys_siglist = yes; then
-AC_DEFINE(UNDER_SYS_SIGLIST_DECLARED)
-fi
-])
-
-AC_DEFUN(BASH_UNDER_SYS_SIGLIST,
-[AC_REQUIRE([BASH_DECL_UNDER_SYS_SIGLIST])
-AC_MSG_CHECKING([for _sys_siglist in system C library])
-AC_CACHE_VAL(bash_cv_under_sys_siglist,
-[AC_TRY_RUN([
-#include <sys/types.h>
-#include <signal.h>
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-#ifndef UNDER_SYS_SIGLIST_DECLARED
-extern char *_sys_siglist[];
-#endif
-main()
-{
-char *msg = (char *)_sys_siglist[2];
-exit(msg == 0);
-}],
- bash_cv_under_sys_siglist=yes, bash_cv_under_sys_siglist=no,
- [AC_MSG_ERROR(cannot check for _sys_siglist[] if cross compiling -- defaulting to no)
- bash_cv_under_sys_siglist=no])])
-AC_MSG_RESULT($bash_cv_under_sys_siglist)
-if test $bash_cv_under_sys_siglist = yes; then
-AC_DEFINE(HAVE_UNDER_SYS_SIGLIST)
-fi
-])
-
-AC_DEFUN(BASH_SYS_SIGLIST,
-[AC_REQUIRE([AC_DECL_SYS_SIGLIST])
-AC_MSG_CHECKING([for sys_siglist in system C library])
-AC_CACHE_VAL(bash_cv_sys_siglist,
-[AC_TRY_RUN([
-#include <sys/types.h>
-#include <signal.h>
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-#ifndef SYS_SIGLIST_DECLARED
-extern char *sys_siglist[];
-#endif
-main()
-{
-char *msg = sys_siglist[2];
-exit(msg == 0);
-}],
- bash_cv_sys_siglist=yes, bash_cv_sys_siglist=no,
- [AC_MSG_ERROR(cannot check for sys_siglist if cross compiling -- defaulting to no)
- bash_cv_sys_siglist=no])])
-AC_MSG_RESULT($bash_cv_sys_siglist)
-if test $bash_cv_sys_siglist = yes; then
-AC_DEFINE(HAVE_SYS_SIGLIST)
-fi
-])
-
-dnl Check for sys_errlist[] and sys_nerr, check for declaration
-AC_DEFUN(BASH_SYS_ERRLIST,
-[AC_MSG_CHECKING([for sys_errlist and sys_nerr])
-AC_CACHE_VAL(bash_cv_sys_errlist,
-[AC_TRY_LINK([#include <errno.h>],
-[extern char *sys_errlist[];
- extern int sys_nerr;
- char *msg = sys_errlist[sys_nerr - 1];],
- bash_cv_sys_errlist=yes, bash_cv_sys_errlist=no)])dnl
-AC_MSG_RESULT($bash_cv_sys_errlist)
-if test $bash_cv_sys_errlist = yes; then
-AC_DEFINE(HAVE_SYS_ERRLIST)
-fi
-])
-
-dnl Check to see if opendir will open non-directories (not a nice thing)
-AC_DEFUN(BASH_FUNC_OPENDIR_CHECK,
-[AC_REQUIRE([AC_HEADER_DIRENT])dnl
-AC_MSG_CHECKING(if opendir() opens non-directories)
-AC_CACHE_VAL(bash_cv_opendir_not_robust,
-[AC_TRY_RUN([
-#include <stdio.h>
-#include <sys/types.h>
-#include <fcntl.h>
-#ifdef HAVE_UNISTD_H
-# include <unistd.h>
-#endif /* HAVE_UNISTD_H */
-#if defined(HAVE_DIRENT_H)
-# include <dirent.h>
-#else
-# define dirent direct
-# ifdef HAVE_SYS_NDIR_H
-# include <sys/ndir.h>
-# endif /* SYSNDIR */
-# ifdef HAVE_SYS_DIR_H
-# include <sys/dir.h>
-# endif /* SYSDIR */
-# ifdef HAVE_NDIR_H
-# include <ndir.h>
-# endif
-#endif /* HAVE_DIRENT_H */
-main()
-{
-DIR *dir;
-int fd;
-unlink("/tmp/not_a_directory");
-fd = open("/tmp/not_a_directory", O_WRONLY|O_CREAT, 0666);
-write(fd, "\n", 1);
-close(fd);
-dir = opendir("/tmp/not_a_directory");
-unlink("/tmp/not_a_directory");
-exit (dir == 0);
-}], bash_cv_opendir_not_robust=yes,bash_cv_opendir_not_robust=no,
- [AC_MSG_ERROR(cannot check opendir if cross compiling -- defaulting to no)
- bash_cv_opendir_not_robust=no]
-)])
-AC_MSG_RESULT($bash_cv_opendir_not_robust)
-if test $bash_cv_opendir_not_robust = yes; then
-AC_DEFINE(OPENDIR_NOT_ROBUST)
-fi
-])
-
-dnl
-AC_DEFUN(BASH_TYPE_SIGHANDLER,
-[AC_MSG_CHECKING([whether signal handlers are of type void])
-AC_CACHE_VAL(bash_cv_void_sighandler,
-[AC_TRY_COMPILE([#include <sys/types.h>
-#include <signal.h>
-#ifdef signal
-#undef signal
-#endif
-#ifdef __cplusplus
-extern "C"
-#endif
-void (*signal ()) ();],
-[int i;], bash_cv_void_sighandler=yes, bash_cv_void_sighandler=no)])dnl
-AC_MSG_RESULT($bash_cv_void_sighandler)
-if test $bash_cv_void_sighandler = yes; then
-AC_DEFINE(VOID_SIGHANDLER)
-fi
-])
-
-AC_DEFUN(BASH_TYPE_INT32_T,
-[
-if test "X$bash_cv_type_int32_t" = "X"; then
-_bash_needmsg=yes
-else
-AC_MSG_CHECKING(which builtin C type is 32 bits wide)
-_bash_needmsg=
-fi
-AC_CACHE_VAL(bash_cv_type_int32_t,
-[AC_TRY_RUN([
-main()
-{
-#if SIZEOF_INT == 4
-exit (0);
-#else
-# if SIZEOF_LONG == 4
-exit (1);
-# else
-# error cannot find 32 bit type...
-# endif
-#endif
-}], bash_cv_type_int32_t=int, bash_cv_type_int32_t=long,
- [AC_MSG_ERROR(cannot check type sizes if cross-compiling -- defaulting to int)
- bash_cv_type_int32_t=int]
-)])
-if test "X$_bash_needmsg" = "Xyes"; then
-AC_MSG_CHECKING(which builtin C type is 32 bits wide)
-fi
-AC_MSG_RESULT($bash_cv_type_int32_t);
-if test "$bash_cv_type_int32_t" = "int"; then
-AC_DEFINE(int32_t, int)
+# generated automatically by aclocal 1.15.1 -*- Autoconf -*-
+
+# Copyright (C) 1996-2017 Free Software Foundation, Inc.
+
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])])
+m4_ifndef([AC_AUTOCONF_VERSION],
+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],,
+[m4_warning([this file was generated for autoconf 2.69.
+You have another version of autoconf. It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically 'autoreconf'.])])
+
+# Copyright (C) 2002-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.15'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version. Point them to the right macro.
+m4_if([$1], [1.15.1], [],
+ [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too. Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+[AM_AUTOMAKE_VERSION([1.15.1])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
+
+# AM_AUX_DIR_EXPAND -*- Autoconf -*-
+
+# Copyright (C) 2001-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to
+# '$srcdir', '$srcdir/..', or '$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory. The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run. This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+# fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+# fails if $ac_aux_dir is absolute,
+# fails when called from a subdirectory in a VPATH build with
+# a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir. In an in-source build this is usually
+# harmless because $srcdir is '.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
+# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+# MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH. The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
+# Expand $ac_aux_dir to an absolute path.
+am_aux_dir=`cd "$ac_aux_dir" && pwd`
+])
+
+# AM_CONDITIONAL -*- Autoconf -*-
+
+# Copyright (C) 1997-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ([2.52])dnl
+ m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
+ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+m4_define([_AM_COND_VALUE_$1], [$2])dnl
+if $2; then
+ $1_TRUE=
+ $1_FALSE='#'