+Tue Dec 2 15:01:08 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * simops.c (OP_3A00): For "macu", perform multiply stage using 32
+ bit rather than 16 bit precision.
+ (OP_3C00): For "mulxu", store unsigned product in ACC.
+ (OP_3800): For "msbu", subtract unsigned product from ACC,
+
+Tue Dec 2 11:04:37 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * simops.c (OP_1000): For "sub2w", compute carry by comparing
+ inputs.
+
+Mon Nov 17 20:57:21 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * simops.c (OP_1): Use 32 bit unsigned arithmetic for subtract,
+ carry indicated by value > 0xffff.
+
+Fri Nov 14 12:51:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * interp.c (sim_resume): Don't set up SIGINT handler using signal,
+ handled by client.
+ (sim_resume): Fix race condition of a direct assignment to
+ stop_simulator, conditionally call sim_stop.
+ (sim_stop_reason): Check stop_simulator returning SIGINT. Clear
+ stop_simulator ready for next sim_resume call.
+ (sim_ctrl_c): Delete function.
+
+Thu Nov 13 19:29:34 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * interp.c (sim_resume): For "REP", only check/update the PC when
+ a branch instruction has not been executed.
+
+Mon Nov 10 17:50:18 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * simops.c (OP_4201): "rachi". Sign extend bit 40 of ACC. Sign
+ extend bit 44 all constants.
+ (OP_4201): Replace GCC specific 0x..LL with SIGNED64 macro.
+
+Fri Oct 24 10:26:29 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * d10v_sim.h: Include sim-types.h.
+ (uint8, in816, uiny16, int32, uint32, int64, uint64): Typedef
+ using unsigned8 et.al. from sim-types.h.
+ (SEXT32, SEXT40, SEXT44, SEXT60): Replace GCC specific 0x..LL with
+ SIGNED64 macro.
+
+Wed Oct 22 14:43:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * interp.c (sim_write_phys): New function, write to physical
+ instead of virtual memory.
+
+ * interp.c (sim_load): Pass lma_p and sim_write_phys to
+ sim_load_file.
+
+Mon Oct 13 10:55:07 1997 Fred Fish <cygnus.com>
+
+ * simops.c (OP_6A01): Change OP_POSTDEC to OP_POSTINC and move
+ exception generation code to OP_6E01.
+ (OP_6E01): Change OP_POSTINC to OP_POSTDEC and insert exception
+ generation code.
+
+Sat Oct 11 09:02:08 1997 Fred Fish <fnf@cygnus.com>
+
+ * simops.c (OP_6401): postdecrement on r15 is OK, remove exception.
+ (OP_6601): Ditto.
+
+Fri Oct 3 09:28:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Sat Sep 27 12:51:34 1997 Fred Fish <fnf@cygnus.com>
+
+ * interp.c (pc_addr): Discard upper bit(s) of PC in case
+ IMAP1 selects unified memory.
+ * d10v_sim.h (INC_ADDR): Align MOD_E to increment before testing
+ for end condition.
+
+Wed Sep 24 17:38:57 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Tue Sep 23 11:04:38 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Mon Sep 22 11:46:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Fri Sep 19 17:45:25 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Mon Sep 15 17:36:15 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Wed Sep 10 22:30:24 1997 Martin M. Hunt <hunt@cygnus.com>
+
+ * interp.c (sim_resume): Increment PC at end of rep
+ loop.
+
+ * simops.c (OP_4201): Fix rachi instruction.
+
+Thu Sep 4 17:21:23 1997 Doug Evans <dje@seba>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Wed Aug 27 18:13:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+ * config.in: Ditto.
+
+Tue Aug 26 10:37:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * interp.c (sim_kill): Delete.
+ (sim_create_inferior): Add ABFD argument.
+ (sim_load): Move setting of PC from here.
+ (sim_create_inferior): To here.
+ (start_address): Delete variable.
+
+Mon Aug 25 17:50:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+ * config.in: Ditto.
+
+Mon Aug 25 15:39:29 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * interp.c (sim_open): Add ABFD argument.
+
+Tue May 20 10:14:45 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * interp.c (sim_open): Add callback argument.
+ (sim_set_callbacks): Remove SIM_DESC argument.
+
+Thu Apr 24 00:39:51 1997 Doug Evans <dje@canuck.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Tue Apr 22 10:29:23 1997 Doug Evans <dje@canuck.cygnus.com>
+
+ * interp.c (sim_open): Undo patch to add -E support.
+
+Fri Apr 18 13:39:01 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * interp.c (sim_stop): New function.
+
+Thu Apr 17 02:42:00 1997 Doug Evans <dje@canuck.cygnus.com>
+
+ * Makefile.in (SIM_OBJS): Add sim-load.o.
+ * d10v_sim.h (exec_bfd): Rename to prog_bfd.
+ * interp.c: #include bfd.h.
+ (myname, sim_kind, start_address): New static locals.
+ (prog_bfd_was_opened_p, prog_bfd): New static locals.
+ (decode_pc): Update to use prog_bfd.
+ (sim_open): Set sim_kind, myname. Ignore -E arg.
+ (sim_close): Close prog_bfd if simulator opened it.
+ (sim_create_inferior): Return SIM_RC. Delete arg start_address.
+ (sim_load): Return SIM_RC. New arg abfd. Set start address from bfd.
+ Call sim_load_file to load file into simulator.
+ * simops.c (trace_input_func): exec_bfd renamed to prog_bfd.
+
+Wed Apr 16 16:12:03 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * simops.c (OP_5F00): Only provide system calls SYS_execv,
+ SYS_wait, SYS_wait, SYS_utime, SYS_time if defined by the host.
+
+Mon Apr 7 15:45:02 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+ * config.in: Ditto.
+
+Wed Apr 2 15:06:28 1997 Doug Evans <dje@canuck.cygnus.com>
+
+ * interp.c (sim_open): New arg `kind'.
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Wed Apr 2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Mon Mar 17 15:10:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
+
+ * configure: Re-generate.
+
+Fri Mar 14 10:34:11 1997 Michael Meissner <meissner@cygnus.com>
+
+ * configure: Regenerate to track ../common/aclocal.m4 changes.
+
+ * simops.c (OP_5F00): Remove old traps 1-3. Make trap 15 the same
+ as trap 0, which will be deprecated. Only set errno, if an error
+ in fact was returned.
+
+Thu Mar 13 12:41:20 1997 Doug Evans <dje@canuck.cygnus.com>
+
+ * interp.c: Delete redundant prototypes of sim_foo fns.
+ (sim_open): New SIM_DESC result. Argument is now in argv form.
+ (other sim_*): New SIM_DESC argument.
+
+Thu Mar 13 10:29:04 1997 Michael Meissner <meissner@cygnus.com>
+
+ * simops.c (trace_{input,output}_func): Call flush_stdout from the
+ callback functions.
+ (OP_5F00): Ditto.
+ (OP_6{4,6,C,A}01): Test for post decrement on the stack pointer.
+ (OP_{1200,1000000,201,5FE0,1003,17001002}): Fix problems in
+ setting the carry bit after an add or a subtract.
+
+Wed Feb 12 16:04:15 1997 Michael Meissner <meissner@cygnus.com>
+
+ * simops.c (OP_{1403,15002A02,3{0,4}0{0,1}}): Only use the bottom
+ 40 bits of accumulators. Sign/zero extend as appropriate.
+
+Tue Feb 4 13:33:30 1997 Doug Evans <dje@canuck.cygnus.com>
+
+ * Makefile.in (@COMMON_MAKEFILE_FRAG): Use
+ COMMON_{PRE,POST}_CONFIG_FRAG instead.
+ * configure.in: sinclude ../common/aclocal.m4.
+ * configure: Regenerated.
+
+Thu Jan 23 11:46:23 1997 Stu Grossman (grossman@critters.cygnus.com)
+
+ * configure configure.in Makefile.in: Update to new configure
+ scheme which is more compatible with WinGDB builds.
+ * configure.in: Improve comment on how to run autoconf.
+ * configure: Re-run autoconf to get new ../common/aclocal.m4.
+ * Makefile.in: Use autoconf substitution to install common
+ makefile fragment.
+
+Fri Dec 27 22:54:05 1996 Angela Marie Thomas (angela@cygnus.com)
+
+ * gencode.c: patch to not #include "d10v_sim.h" which
+ unecessarily includes bfd.h and causes wingdb configure
+ to fail.
+
+Mon Dec 16 13:39:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
+
+ * interp.c (xfer_mem): Change unified memory to 0x0.
+
+Thu Nov 28 20:42:56 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * simops.c (OP_3E01): Fix tracing information.
+ (OP_300{0,1}): Do not propigate sign.
+
+Mon Nov 25 19:47:40 1996 Doug Evans <dje@canuck.cygnus.com>
+
+ * config.in (WORDS_BIGENDIAN): Add.
+ * configure: Regenerated.
+ * d10v_sim.h: #include "config.h"
+
+Sat Nov 23 09:34:50 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * gencode.c (write_opcodes): Eliminate warnings when generated
+ table.c is compiled.
+
+Wed Nov 20 19:41:40 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * interp.c (sim_open): Cast result of calloc, and make sure NULL
+ was not returned.
+ (dmem_addr): If address is illegal or in I/O space, signal a bus
+ error.
+ (pc_addr): Signal bus error, not illegal instruction for bogus
+ pc.
+
+Wed Nov 20 01:23:03 1996 Doug Evans <dje@canuck.cygnus.com>
+
+ * Makefile.in: Delete all stuff moved to ../common/Make-common.in.
+ (SIM_OBJS,SIM_EXTRA_CFLAGS,SIM_EXTRA_CLEAN): Define.
+ * configure.in: Simplify using macros in ../common/aclocal.m4.
+ Call AC_CHECK_HEADERS(unistd.h).
+ * configure: Regenerated.
+ * config.in: New file.
+ * interp.c: #include "callback.h".
+ * simops.c: #include "config.h". #include <unistd.h> if present.
+
+Fri Nov 8 16:19:55 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
+
+ * d10v-sim.h (simops): Add flag is_long.
+ (State): Add pc_changed. Instructions which update the PC should
+ use the JMP macro which sets this.
+ (JMP): New macro. Sets the PC and the pc_changed flag.
+
+ * gencode.c (write_opcodes): Add is_long field.
+
+ * interp.c (lookup_hash): If we blindly apply a short opcode's mask
+ to a long opcode we could get a false match. Check the opcode size.
+ (hash): Add a size field to the hash table.
+ (sim_open): Initialize size field in hash table.
+ (sim_resume): Change to logic for setting the PC. Used to increment the
+ PC if it had not been changed. This didn't allow single-instruction loops.
+ Now checks the flag State.pc_changed. Also now stops when ^C is received.
+ (dmem_addr): Fix translation of data segments to unified memory.
+ (sim_ctrl_c): New function. When ^C is received, set stop_simulator flag.
+
+ * simops.c: Changed all branch and jump instructions to use new JMP macro.
+ (OP_20000000): Corrected trace information to show this is a ldi.l, not
+ a ldi.s instruction.
+
+Thu Oct 31 19:13:55 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
+
+ * interp.c (sim_fetch_register, sim_store_register): Fix bug where
+ updating the accumulators was overwriting other parts of the global
+ State variable.
+
+Wed Oct 30 17:35:14 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * interp.c (bfd.h) Don't include it here any more.
+ (text{,_start,_end}): Move here from simops.c and make extern.
+ (decode_pc): New function to return the PC as an address that the
+ debugger can use.
+ (dmem_addr): Print decoded PC in error message.
+ (pc_addr): Ditto.
+
+ * simops.c (bfd.h) Don't include it here any more.
+ (text{,_start,_end}): Move to simops.c.
+ (trace_input_func): Move decoding of PC, and looking up .text
+ start to decode_pc.
+
+ * d10v_sim.h (bfd.h): Include it here.
+ (text{,_start,_end}): Add external declarations.
+ (exec_bfd): Ditto.
+ (decode_pc): Ditto.
+
+Tue Oct 29 12:13:52 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
+
+ * interp.c (sim_size): Now allocates unified memory for imap segments
+ 0,1,2, and 127. Initializes imap0 and imap1 to 0x1000. Initializes dmap to 0.
+ (sim_write): Just call xfer_mem().
+ (sim_read): Just call xfer_mem().
+ (xfer_mem): New function. Does appropriate memory mapping and copies bytes.
+ (dmem_addr): New function. Reads dmap register and translates data
+ addresses to local addresses.
+ (pc_addr): New function. Reads imap register and computes local address
+ corresponding to contents of the PC.
+ (sim_resume): Change to use pc_addr().
+ (sim_create_inferior): Change reinitialization code. Also reinitializes
+ imap[01] and dmap.
+ (sim_fetch_register): Add fake registers 32,33,34 for imap0, imap1, and dmap.
+ (sim_store_register): Add fake registers 32,33,34 for imap0, imap1, and dmap.
+
+ * simops.c (MEMPTR): Redefine to use dmem_addr().
+ (OP_5F00): Replace references to STate.imem with dmem_addr().
+
+ * d10v-sim.h (State): Remove mem_min and mem_max. Add umem[128].
+ (RB,SW,RW,SLW,RLW): Redefine to use dmem_addr().
+ (IMAP0,IMAP1,DMAP,SET_IMAP,SET_IMAP1,SET_DMAP): Define.
+
+Tue Oct 22 15:22:33 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * d10v_sim.h (_ins_type): Reorganize, so that we can provide
+ better statistics, like not counting NOPS as parallel
+ instructions, and printing total cycles.
+ (ins_type_counters): Make unsigned long.
+ (left_nops,right_nops): Fold into ins_type_counters.
+
+ * simops.c (trace_input_func): Print new instruction types.
+ Handle OP_R2R3 as input types.
+ (OP_{38000000,7000}): Correctly sign extend bytes.
+ (OP_5E00): Don't count NOPs as parallel instructions.
+ (OP_460B): Remove unused variable.
+ (OP_5F00): Ditto.
+
+ * interp.c (ins_type_counters): Make unsigned long.
+ (left_nops,right_nops): Delete.
+ (most functions): Add prototypes.
+ (INLINE): If GCC and optimize define as __inline__.
+ ({,lookup_}hash,get_operands): Declare as INLINE.
+ (do_parallel): Count conditional operations.
+ (add_commas): New function, to add commas every 3 digits.
+ (sim_size): Call add_commas to print numbers.
+ (sim_{open,resume}): Delete unused variables.
+ (sim_info): Provide better statistics.
+ (sim_read): Add int return type.
+
+Mon Oct 21 16:16:26 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
+
+ * interp.c (sim_resume): Change the way single-stepping and exceptions
+ are handled so single-stepping works again.
+
+Thu Oct 17 12:24:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * endian.c: Optimize simulated loads/stores on x86, AIX, and big
+ endian hosts.
+
+ * configure.in (--enable-sim-bswap): New switch to enable using
+ the BSWAP instruction on x86's.
+ * configure: Regenerate.
+
+ * Makefile.in ({SWAP,CONFIG}_CFLAGS): Add --enable-sim-bswap
+ support.
+
+Wed Oct 16 13:50:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * endian.c: New file. Move endian functions here from interp.c.
+ Optimize code, and make it work as either inline functions or as a
+ separate file.
+
+ * interp.c: Move endian functions from here to endian.c.
+
+ * Makefile.in (INCLUDE): Add endian.c.
+ (run,libsim.a): Add dependency on endian.o.
+ (endian.o): Add dependency.
+
+ * d10v_sim.h (read/write support): Always go through the machine
+ independent endian functions. If compiling with GCC and
+ optimizing, include endian.c so the endian functions are inlined.
+
+ * simops.c (OP_5F00): Correct tracing of accumulators.
+
+Tue Oct 15 10:57:50 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * simops.c (OP_5F00): Add support for getpid, kill system calls.
+
+ * interp.c (do_{2_short,parallel}): If an exception is raised,
+ don't execute the second instruction.
+
+Sat Oct 12 22:17:43 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * simops.c (OP_{31000000,6601,6201,6200}): Store address in a
+ temporary in case the register is overriden when loading.
+ (OP_6200): Output type is OP_DREG for tracing.
+
+Fri Oct 4 23:46:18 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * d10v_sim.h (struct _state): Add mem_{min,max} fields.
+
+ * interp.c (sim_size): Initialize mem_{min,max} fields.
+ (sim_write): Update mem_{min,max} fields.
+ (sim_resume): If PC is not in the minimum/maximum memory range,
+ abort.
+ (sim_create_inferior): Preserve mem_{min,max} fields.
+
+Fri Sep 27 13:11:58 1996 Mark Alexander <marka@cygnus.com>
+
+ * simops.c (OP_5F00): Add support for time() system call.
+
+Wed Sep 25 16:31:41 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * simops.c (OP_{6E01,6A01,6E1F,6A00}): Print both words being
+ stored if tracing.
+ (OP_5F00,trace_{in,out}put_func): Add finer grain tracing for
+ system calls.
+
+Mon Sep 23 17:55:30 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * simops.c (op_types): Add OP_{CONSTANT8,R2,R3}.
+ (trace_input_func): Add support for OP_{CONSTANT8,R2,R3}.
+ (OP_{4900,24800000,4800,4A00,4B00,4D00,4C00}): Add OP_R2 and OP_R3
+ to call/subroutine returns to trace the first two arguments and
+ the return value. For small jumps, use CONSTANT8, not CONSTANT16.
+
+Fri Sep 20 15:36:45 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
+
+ * interp.c (sim_create_inferior): Reinitialize State every time
+ sim_create_inferior() is called.
+
+Thu Sep 19 21:38:20 1996 Michael Meissner <meissner@wogglebug.ziplink.net>
+
+ * simops.c (OP_{401,2000000,601,3000000,23000000}): Get sign right
+ on comparisons.
+ (OP_401): Fix tracing information.
+
+Thu Sep 19 10:30:22 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * simops.c (SIZE_{PC,LINE_NUMBER}): New default sizes for output.
+ (trace_input_func): Use them.
+ (trace_input_func): Make sure there is a trailing space after the
+ instruction.
+ (OP_6200): Fix tracing info.
+
+ * Makefile.in (run): Add dependencies on libbfd.a and
+ libiberity.a.
+
+Wed Sep 18 09:13:25 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * d10v_sim.h (DEBUG_INSTRUCTION): New debug value to include line
+ numbers and function names in debug trace.
+ (DEBUG): If not defined, set to DEBUG_TRACE, DEBUG_VALUES, and
+ DEBUG_LINE_NUMBER.
+ (SIG_D10V_{STOP,EXIT}): Values to represent the stop instruction
+ and exit system call trap being executed.
+
+ * interp.c (sim_stop_reason): Set exit code correctly for stop
+ instruction and exit system call trap.
+
+ * configure.in (--enable-sim-cflags): Remove trace case.
+ (--enable-sim-debug): New switch to set the debug values.
+ * configure: Regenerate.
+
+ * simops.c (trace_{input,output}_func): Rename from
+ trace_{input,output}.
+ (trace_{input,output}): Call trace_{input,output}_func if
+ d10v_debug is non-zero.
+ (SIZE_INSTRUCTION): Cut down to 8.
+ (SIZE_OPERANDS): Cut down to 18.
+ (SIZE_LOCATION): New value for size of line number, function name
+ field.
+ (init_text_p,text{,_start,_end}): New static variables for
+ printing line number and function name.
+ (exec_bfd): New external that run.c sets.
+ (trace_input_func): Print line number and function name if
+ available and if desired.
+ (OP_4E09): Don't print out DBT message.
+ (OP_5FE0): Set exception field to SIG_D10V_STOP.
+ (OP_5F00): Set exception field to SIG_D10V_EXIT.
+
+Sat Sep 14 22:18:43 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * interp.c (do_2_short): If the instruction encodes jump->ins,
+ don't do the second instruction if the jump succeeds.
+
+Fri Sep 13 22:35:19 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * simops.c (OP_5F00): Use unknown traps to print all GPRs,
+ accumulators, PC, and F0/F1/C flags.
+
+Thu Sep 12 12:50:11 1996 Mark Alexander <marka@cygnus.com>
+
+ * simops.c (OP_5F00): Fix problems with system calls.
+
+Thu Sep 12 12:19:28 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * simops.c (OP_5F00): Correct tracing information for trap.
+
+Wed Sep 11 18:55:50 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * Makefile.in (CSEARCH): Correctly find opcodes directory.
+
+Mon Sep 9 13:27:26 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * simops.c (trace_output): Properly align accumulator output.
+ (OP_3{0,2,4}00): Properly parenthesize test expression. Add error
+ if shift count is too high.
+ (OP_4E{00,02,04,20,22,40,42}): Make tests agree with book.
+ (OP_4E09): Make cpfg properly trace the input flags.
+ (op_types): Add OP_FLAG_OUTPUT.
+ (trace_{input,output}): Support OP_FLAG_OUTPUT.
+ (OP_31000000): This ld2w varient is a 16-bit memory reference, not
+ an 8-bit memory reference instruction for tracing purposes.
+ (OP_201): Addi needs to set the carry.
+
+Fri Sep 6 17:56:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
+
+ * simops.c (OP_2600, OP_2601): Changed min and max comparisons
+ to use signed register values.
+