+Mon Jan 3 02:06:07 2000 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * interp.c (lookup_hash): Stop the update of the PC when there was
+ an illegal instruction exception.
+
+Mon Jan 3 00:14:33 2000 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * simops.c (address_exception): New function.
+ (OP_30000000, OP_6401, OP_6001, OP_6000, OP_32010000, OP_31000000,
+ OP_6601, OP_6201, OP_6200, OP_33010000, OP_34000000, OP_6800,
+ OP_6C1F, OP_6801, OP_6C01, OP_36010000, OP_35000000, OP_6A00,
+ OP_6E1F, OP_6A01, OP_6E01, OP_37010000): For "ld", "ld2w", "st"
+ and "st2w" check that the address is aligned.
+
+1999-11-25 Nick Clifton <nickc@cygnus.com>
+
+ * simops.c (OP_4E0F): New function: Simulate new bit pattern for
+ cpfg instruction.
+
+Fri Oct 29 18:34:28 1999 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * simops.c (move_to_cr): Don't allow user to set PSW.DM in either
+ DPSW and BPSW.
+
+Thu Oct 28 01:26:18 1999 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * simops.c (OP_5F20): Use SET_HW_PSW when updating PSW.
+ (PSW_HW_MASK): Declare.
+
+ * d10v_sim.h (move_to_cr): Add ``psw_hw_p'' parameter.
+ (SET_CREG, SET_PSW_BIT): Update.
+ (SET_HW_CREG, SET_HW_PSW): Define.
+
+Sun Oct 24 21:38:04 1999 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * interp.c (sim_d10v_translate_dmap_addr): Fix extraction of IOSP
+ for DMAP3.
+
+Sun Oct 24 16:04:16 1999 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * interp.c (sim_d10v_translate_addr): New function.
+ (xfer_mem): Rewrite. Use sim_d10v_translate_addr.
+ (map_memory): Make INLINE.
+
+Sun Oct 24 13:45:19 1999 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * interp.c (sim_d10v_translate_dmap_addr): New function.
+ (dmem_addr): Rewrite. Use sim_d10v_translate_dmap_addr. Change
+ offset parameter to type uint16.
+ * d10v_sim.h (dmem_addr): Update declaration.
+
+Sun Oct 24 13:07:31 1999 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * interp.c (imap_register, set_imap_register, dmap_register,
+ set_imap_register): Use map_memory.
+ (DMAP): Update.
+ (sim_create_inferior): Initialize all DMAP registers. NOTE that
+ DMAP2, in internal memory mode, is set to 0x0000 and NOT
+ 0x2000. This is consistent with the older d10v boards.
+
+Sun Oct 24 11:22:12 1999 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * interp.c (sim_d10v_translate_imap_addr): New function.
+ (imem_addr): Rewrite. Use sim_d10v_translate_imap_addr.
+ (last_from, last_to): Declare.
+
+Sun Oct 24 01:21:56 1999 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * d10v_sim.h (struct d10v_memory): Define. Support very long
+ memories.
+ (struct _state): Replace imem, dmem and umem by mem.
+ (IMAP_BLOCK_SIZE, DMAP_BLOCK_SIZE, SEGMENT_SIZE, IMEM_SEGMENTS,
+ DMEM_SEGMENTS, UMEM_SEGMENTS): Define.
+
+ * interp.c (map_memory): New function.
+ (sim_size, xfer_memory, imem_addr, dmem_addr): Update.
+ (UMEM_SEGMENTS): Moveed to "d10v_sim.h".
+ (IMEM_SIZEDMEM_SIZE): Delete.
+
+Sat Oct 23 20:06:58 1999 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * interp.c: Include "sim-d10v.h".
+ (imap_register, set_imap_register, dmap_register,
+ set_dmap_register, spi_register, spu_register, set_spi_register,
+ set_spu_register): New functions.
+ (sim_create_inferior): Update.
+ (sim_fetch_register, sim_store_register): Rewrite. Use enums
+ defined in sim-d10v.h.
+
+ * d10v_sim.h (DEBUG_MEMORY): Define.
+ (IMAP0, IMAP1, DMAP, SET_IMAP0, SET_IMAP1, SET_DMAP): Delete.
+
+Sat Oct 23 18:41:18 1999 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * interp.c (sim_open): Allow a debug value to be passed to the -t
+ option.
+ (lookup_hash): Don't exit on an illegal instruction.
+ (do_long, do_2_short, do_parallel): Check for failed instruction
+ lookup.
+
+Mon Oct 18 18:03:24 MDT 1999 Diego Novillo <dnovillo@cygnus.com>
+
+ * simops.c (OP_3220): Fix trace output for illegal accumulator
+ message.
+
+1999-09-14 Nick Clifton <nickc@cygnus.com>
+
+ * simops.c: Disable setting of DM bit in PSW.
+
+Wed Sep 8 19:34:55 MDT 1999 Diego Novillo <dnovillo@cygnus.com>
+
+ * simops.c (op_types): Added new memory indirect type OP_MEMREF3.
+ (trace_input_func): Added support for OP_MEMREF3.
+ (OP_32010000): New instruction ld.
+ (OP_33010000): New instruction ld2w.
+ (OP_5209): New instruction sac.
+ (OP_4209): New instruction sachi.
+ (OP_3220): New instruction slae.
+ (OP_36010000): New instruction st.
+ (OP_37010000): New instruction st2w.
+
+1999-09-09 Stan Shebs <shebs@andros.cygnus.com>
+
+ * interp.c (old_segment_mapping): New global.
+ (xfer_mem): Change the default segment mapping to be the way
+ that Mitsubishi prefers, but use the previous mapping if
+ old_segment_mapping is true.
+ (sim_open): Add an option -oldseg to get the old mapping.
+ (sim_create_inferior): Init mapping registers based on the
+ value of old_segment_mapping.
+
+1999-09-07 Nick Clifton <nickc@cygnus.com>
+
+ * simops.c (OP_6601): Do not write back decremented address if
+ either of the destination registers was the same as the address
+ register.
+ (OP_6201): Do not write back incremented address if either of the
+ destination registers was the same as the address register.
+
+Thu Sep 2 18:15:53 1999 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+1999-05-08 Felix Lee <flee@cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+1999-04-02 Keith Seitz <keiths@cygnus.com>
+
+ * interp.c (ui_loop_hook_counter): New global (when NEED_UI_LOOP_HOOK
+ defined).
+ (sim_resume): If the counter has expired, call the ui_loop_hook,
+ if defined.
+ (UI_LOOP_POLL_INTERVAL): Define. Used to tweak the frequency of
+ ui_loop_hook calls.
+ * Makefile.in (SIM_EXTRA_CFLAGS): Include NEED_UI_LOOP_HOOK.
+
+Wed Mar 10 19:32:13 1999 Nick Clifton <nickc@cygnus.com>
+
+ * simops.c: If load instruction with auto increment/decrement
+ addressing is used when the destination register is the same as
+ the address register, then ignore the auto increment/decrement.
+
+Wed Mar 10 19:32:13 1999 Martin M. Hunt <hunt@cygnus.com>
+
+ * simops.c (OP_5F00): Ifdef SYS_stat case because
+ not all systems have it defined.
+
+1999-01-26 Jason Molenda (jsm@bugshack.cygnus.com)
+
+ * simops.c (OP_5607): Correct saturation comparison/assignment.
+ (OP_1201, OP_1203, OP_17001200, OP_17001202,
+ OP_2A00, OP_2800, OP_2C00, OP_3200, OP_3201,
+ OP_1001, OP_1003, OP_17001000, OP_17001002): Ditto.
+
+1999-01-26 Jason Molenda (jsm@bugshack.cygnus.com)
+
+ * simops.c (OP_5605): Sign extend MIN32 and MAX32 before saturation
+ comparison.
+ (OP_5607): Ditto.
+ (OP_2A00): Ditto.
+ (OP_2800): Ditto.
+
+1999-01-13 Jason Molenda (jsm@bugshack.cygnus.com)
+
+ * simops.c (OP_1223): Sign extend MIN32 and MAX32 before saturation
+ comparison.
+
+Tue Nov 24 17:04:43 1998 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * simops.c (sys/syscall.h): Include targ-vals.h instead.
+ (SYS_*): Replace with TARGET_SYS_*.
+
+ * Makefile.in: Add dependency on targ-vals.h.
+ (NL_TARGET): Define as NL_TARGET_d10v.
+
+Wed Sep 30 00:06:32 1998 Andrew Cagney <cagney@amy.cygnus.com>
+
+ * interp.c (xfer_mem): Missing break, instruction memory case
+ flowed into unified memory case.
+
+Wed Sep 30 10:14:18 1998 Nick Clifton <nickc@cygnus.com>
+
+ * simops.c: If load instruction with auto increment/decrement
+ addressing is used when the destination register is the same as
+ the address register, then ignore the auto increment/decrement.
+
+Tue Apr 28 18:33:31 1998 Geoffrey Noer <noer@cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Sun Apr 26 15:31:55 1998 Tom Tromey <tromey@creche>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+ * config.in: Ditto.
+
+Sun Apr 26 15:20:23 1998 Tom Tromey <tromey@cygnus.com>
+
+ * acconfig.h: New file.
+ * configure.in: Reverted change of Apr 24; use sinclude again.
+
+Fri Apr 24 14:16:40 1998 Tom Tromey <tromey@creche>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+ * config.in: Ditto.
+
+Fri Apr 24 11:20:06 1998 Tom Tromey <tromey@cygnus.com>
+
+ * configure.in: Don't call sinclude.
+
+Fri Apr 24 11:04:46 1998 Andrew Cagney <cagney@chook.cygnus.com>
+
+ * interp.c (struct hash_entry): OPCODE and MASK are unsigned.
+
+ * d10v_sim.h (remote-sim.h, sim-config.h): Include.
+
+Sat Apr 4 20:36:25 1998 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Wed Apr 1 12:59:17 1998 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * simops.c (trace_input_func): Use move_from_cr / CREGS to obtain
+ up-to-date CR value.
+ (OP_OP_1000000, add3): Trace inputs before performing add.
+ (OP_5F00, <*>): Trace input registers before making system call.
+ (OP_5F00, <kill>): Trace R0, R1 not REGn.
+ (OP_5F00, <getpid>): Always return 47.
+
+ * d10v_sim.h (SLOT, SLOT_NR, SLOT_PEND_MASK, SLOT_PEND,
+ SLOT_DISCARD, SLOT_FLUSH): Define. An implementation of write
+ back slots.
+ (struct _state): Add struct slot slot to global state variable.
+ (struct _state): Delete fields SM, EA, DB, DM, IE, RP, MD, FX, ST,
+ F0, F1, C from global State variable.
+ (struct _state): Add struct trace to global State variable.
+ (GPR, SET_GPR): Define. SET_GPR uses SLOT_PEND.
+ (PSW*, SET_PSW*): Define. SET_PSW* uses SET_CREG.
+ (CREG, SET_CREG, SET_*): Define. SET_CREG uses func move_to_cr.
+ (INC_ADDR): Re-implement. Use SET_GPR to update registers.
+ (JMP): Re-implement. Use SET_* to update registers.
+
+ * interp.c: Use new SET_* et.al. macros to fetch / store
+ registers.
+ (get_operands): Squirrel away trace values at start of each
+ operand decode.
+ (do_2_short): Flush pending writes before issuing second
+ instruction.
+ (sim_resume): Flush pending writes at end of instruction cycle.
+ (sim_fetch_register, sim_store_register, sim_create_inferior):
+ After scheduling updates to registers using SET_*, flush updates.
+ (sim_resume): Re-order handling of RPT/repeat and IBA/hbreak so
+ that each sets pc using SET_* and last SET_* eventually winds out.
+
+ * simops.c: Use new SET_* et.al. macros to fetch / store
+ registers.
+ (move_to_cr): Add MASK argument for selective update of CREG bits.
+ Re-implement using new SET_* macros.
+ (trace_output_func, trace_output): Delete. Replace with.
+ (do_trace_output_flush, trace_output_finish, trace_output_40,
+ trace_output_32, trace_output_16, trace_output_void,
+ trace_output_flag): New functions. Handle specific trace cases.
+ (OP_*): Re-write tracing to use new trace_output_* functions.
+ (OP_*): Re-write to use new SET_* et.al. macros.
+ (FUNC, PARM[1-4], RETVAL, RETVAL32): Redo definition.
+ (RETVAL_HIGH, RETVAL_LOW): Delete, use RETVAL32.
+
+Wed Apr 1 12:55:18 1998 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure.in (SIM_AC_OPTION_WARNINGS): Add.
+ configure: Re-generate.
+
+Fri Mar 27 16:15:52 1998 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Wed Mar 25 12:35:29 1998 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Wed Mar 18 12:38:12 1998 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Tue Feb 17 12:38:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * interp.c (sim_store_register, sim_fetch_register): Pass in
+ length parameter. Return -1.
+
+Mon Oct 27 14:43:33 1997 Fred Fish <fnf@cygnus.com>
+
+ * (dmem_addr): If address is illegal or in I/O space, signal a bus
+ error. Allocate unified memory on demand. Fix DMEM address
+ calculations.
+
+Mon Feb 16 10:27:53 1998 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * simops.c (OP_5F20): Implement "dbt".
+ (OP_5F60): Implement "rtd".
+
+ * d10v_sim.h (DPC_CR): Define enum.
+ (DBT_VECTOR_START): Define
+ (DPSW, DPC): Define.
+
+Fri Feb 13 15:15:58 1998 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * simops.c (move_to_cr): Sync regs[SP_IDX] with State.sp according
+ to PSW:SM.
+
+ * d10v_sim.h (struct _state): Add sp, as holding area for SPI/SPU.
+ (SP_IDX): Define.
+
+Wed Feb 11 16:53:49 1998 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * simops.c (OP_5F00): Call error instead of abort for unknown
+ syscalls.
+
+ * d10v_sim.h (enum): Define DPSW_CR.
+
+ * simops.c (move_to_cr): Mask out hardwired zero bits in DPSW.
+
+Tue Feb 10 18:28:38 1998 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * interp.c (sim_write_phys): Delete.
+ (sim_load): Call sim_load_file with sim_write and LMA.
+
+Mon Feb 9 12:05:01 1998 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * interp.c: Rewrite xfer_mem so that it translates addresses as -
+ 0x00... - DMAP translated memory, 0x01... IMAP translated memory,
+ 0x10... - on-chip data, 0x11... - on-chip insn, 0x12... - unified
+ memory.
+ (pc_addr): Delete.
+ (imem_addr): New function - translate IMEM address.
+ (sim_resume): Use imem_addr to translate insn address, abort if
+ translation failed.
+ (sim_create_inferior): Write ARGV to memory using sim_write. Pass
+ argc/argv using r0/r1 not r2/r3.
+ (sim_size): Do not initialize IMAP/DMAP here.
+ (sim_open): Call sim_create_inferior and sim_size to initialize
+ the system.
+ (sim_create_inferior): Initialize IMAP/DMAP to hardware reset
+ defaults.
+ (init_system): Delete.
+ (xfer_mem, sim_fetch_register, sim_store_register): Do not call
+ init_system.
+ (decode_pc): Check prog_bfd is defined before looking up .text
+ section.
+
+Sun Feb 1 16:47:51 1998 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Sat Jan 31 18:15:41 1998 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Sun Jan 25 22:23:01 1998 Michael Meissner <meissner@cygnus.com>
+
+ * interp.c (sim_stop_reason): Exit status is now in r0, not r2.
+
+Sat Jan 24 19:00:30 1998 Michael Meissner <meissner@cygnus.com>
+
+ * d10v_sim.h (DEBUG_TRAP): New debug flag.
+
+ * simops.c (OP_5F00): If DEBUG_TRAP is on, turn traps 0-14 into
+ printing the registers.
+
+Thu Jan 22 17:54:01 1998 Michael Meissner <meissner@cygnus.com>
+
+ * simops.c (op_types): New ABI, args are r0..r3, system call # is
+ in r4.
+ (trace_{in,out}put_func): Ditto.
+ (OP_4900): Ditto.
+ (OP_24800000): Ditto.
+ (OP_4D00): Ditto.
+ (OP_5F00): Ditto.
+
+Thu Jan 22 14:30:36 1998 Fred Fish <fnf@cygnus.com>
+
+ * interp.c (UMEM_SEGMENTS): New define, set to 128.
+ (sim_size): Use UMEM_SEGMENTS rather than hardwired constant.
+ (sim_close): Reset prog_bfd to NULL after closing it. Also
+ reset prog_bfd_was_opened_p after closing prog_bfd.
+ (sim_load): Reset prog_bfd_was_opened_p after closing prog_bfd.
+ (sim_create_inferior): Get start address from abfd not prog_bfd.
+ (xfer_mem): Do bounds checking on addresses and return zero length
+ read/write on bad addresses, rather than aborting. Prepare to
+ be able to handle xfers that cross segment boundaries, but not
+ yet implemented. Only emit debug message when d10v_debug is
+ set as well as DEBUG being defined.
+
+Mon Jan 19 22:26:29 1998 Doug Evans <devans@seba>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Mon Dec 15 23:17:11 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+ * config.in: Ditto.
+
+Tue Dec 9 10:28:31 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * d10v_sim.h (RPT_S): Index cregs with RPT_S_CR not RPT_E_CR.
+ (BPSW): Ditto for BPSW_CR and not PSW_CR.
+
+ * simops.c (OP_5F40): JMP to BPC instead of assigning PC directly.
+
+Mon Dec 8 12:58:33 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * simops.c (OP_5F00): From Martin Hunt <hunt@cygnus.com>. Change
+ reserved trap from 0 to 15. Add trap emulation code for 0-14.
+
+ * interp.c (sim_resume): From Martin Hunt <hunt@cygnus.com>. Check
+ IBA for SDBT.
+
+ * d10v_sim.h (AE_VECTOR_START, RIE_VECTOR_START,
+ SDBT_VECTOR_START, TRAP_VECTOR_START): Define.
+
+ * simops.c (OP_5F00): For "trap", mask out all but SM bit in PSW,
+ use move_to_cr.
+ (OP_5F00): For "trap", update BPSW with move_to_cr.
+
+Fri Dec 5 15:31:17 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * d10v_sim.h (enum): Enumerate CR register names.
+ (enum): Enumerate PSW bit values.
+ (PSW): Obtain value uing move_from_cr.
+ (MOD_S, MOD_E, BPSW): Make r-values.
+ (move_from_cr, move_to_cr): Declare functions.
+
+ * interp.c (sim_fetch_register, sim_store_register): Use
+ move_from_cr and move_to_cr for CR register transfers.
+
+ * simops.c (move_from_cr, move_to_cr): New functions.
+ (OP_5F40): Move BPSW to PSW using move_to_cr and move_from_cr.
+ (OP_5600): For "mvtc", use function move_to_cr.
+ (OP_5200): For "mvfc", use function move_from_cr.
+
+Fri Dec 5 13:33:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * simops.c (OP_5600): For "mvtc" MOD_E and MOD_S, ensure that the
+ LSbit is zero.
+
+Thu Dec 4 09:21:05 1997 Doug Evans <devans@canuck.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Thu Dec 4 16:51:02 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * d10v_sim.h (struct _state): Add DM - PSW debug mask.
+
+ * simops.c (OP_5600): For "mvtc", save PSW.DM.
+ (OP_5200): Ditto for "mvfc".
+
+Wed Dec 3 17:27:06 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * d10v_sim.h (SEXT56): Define.
+
+ * simops.c (OP_4201): For "rac", sign extend 56 bit value before
+ it is shifted.
+
+ * d10v_sim.h (MAX32, MIN32, MASK32, MASK40): Re-define using
+ SIGNED64 macro.
+
+Tue Dec 2 15:38:34 1997 Fred Fish <fnf@cygnus.com>
+
+ * interp.c (sim_resume): Call do_2_short with LEFT_FIRST or
+ RIGHT_FIRST, as appropriate, instead of hardcoded ints that
+ don't match enum values.
+
+Tue Dec 2 15:01:08 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * simops.c (OP_3A00): For "macu", perform multiply stage using 32
+ bit rather than 16 bit precision.
+ (OP_3C00): For "mulxu", store unsigned product in ACC.
+ (OP_3800): For "msbu", subtract unsigned product from ACC,
+ (OP_0): For "sub", compute carry by comparing inputs.
+
+Tue Dec 2 11:04:37 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * simops.c (OP_1000): For "sub2w", compute carry by comparing
+ inputs.
+
+Mon Nov 17 20:57:21 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * simops.c (OP_1): Use 32 bit unsigned arithmetic for subtract,
+ carry indicated by value > 0xffff.
+
+Fri Nov 14 12:51:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * interp.c (sim_resume): Don't set up SIGINT handler using signal,
+ handled by client.
+ (sim_resume): Fix race condition of a direct assignment to
+ stop_simulator, conditionally call sim_stop.
+ (sim_stop_reason): Check stop_simulator returning SIGINT. Clear
+ stop_simulator ready for next sim_resume call.
+ (sim_ctrl_c): Delete function.
+
+Thu Nov 13 19:29:34 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * interp.c (sim_resume): For "REP", only check/update the PC when
+ a branch instruction has not been executed.
+
+Mon Nov 10 17:50:18 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * simops.c (OP_4201): "rachi". Sign extend bit 40 of ACC. Sign
+ extend bit 44 all constants.
+ (OP_4201): Replace GCC specific 0x..LL with SIGNED64 macro.
+
+Fri Oct 24 10:26:29 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * d10v_sim.h: Include sim-types.h.
+ (uint8, in816, uiny16, int32, uint32, int64, uint64): Typedef
+ using unsigned8 et.al. from sim-types.h.
+ (SEXT32, SEXT40, SEXT44, SEXT60): Replace GCC specific 0x..LL with
+ SIGNED64 macro.
+
+Wed Oct 22 14:43:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * interp.c (sim_write_phys): New function, write to physical
+ instead of virtual memory.
+
+ * interp.c (sim_load): Pass lma_p and sim_write_phys to
+ sim_load_file.
+
+Mon Oct 13 10:55:07 1997 Fred Fish <cygnus.com>
+
+ * simops.c (OP_6A01): Change OP_POSTDEC to OP_POSTINC and move
+ exception generation code to OP_6E01.
+ (OP_6E01): Change OP_POSTINC to OP_POSTDEC and insert exception
+ generation code.
+
+Sat Oct 11 09:02:08 1997 Fred Fish <fnf@cygnus.com>
+
+ * simops.c (OP_6401): postdecrement on r15 is OK, remove exception.
+ (OP_6601): Ditto.
+
+Fri Oct 3 09:28:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Sat Sep 27 12:51:34 1997 Fred Fish <fnf@cygnus.com>
+
+ * interp.c (pc_addr): Discard upper bit(s) of PC in case
+ IMAP1 selects unified memory.
+ * d10v_sim.h (INC_ADDR): Align MOD_E to increment before testing
+ for end condition.
+
+Wed Sep 24 17:38:57 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Tue Sep 23 11:04:38 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Mon Sep 22 11:46:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Fri Sep 19 17:45:25 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Mon Sep 15 17:36:15 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Wed Sep 10 22:30:24 1997 Martin M. Hunt <hunt@cygnus.com>
+
+ * interp.c (sim_resume): Increment PC at end of rep
+ loop.
+
+ * simops.c (OP_4201): Fix rachi instruction.
+
+Thu Sep 4 17:21:23 1997 Doug Evans <dje@seba>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Wed Aug 27 18:13:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+ * config.in: Ditto.
+
+Tue Aug 26 10:37:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * interp.c (sim_kill): Delete.
+ (sim_create_inferior): Add ABFD argument.
+ (sim_load): Move setting of PC from here.
+ (sim_create_inferior): To here.
+ (start_address): Delete variable.
+
+Mon Aug 25 17:50:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+ * config.in: Ditto.
+
+Mon Aug 25 15:39:29 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * interp.c (sim_open): Add ABFD argument.
+
+Tue May 20 10:14:45 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * interp.c (sim_open): Add callback argument.
+ (sim_set_callbacks): Remove SIM_DESC argument.
+
+Thu Apr 24 00:39:51 1997 Doug Evans <dje@canuck.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Tue Apr 22 10:29:23 1997 Doug Evans <dje@canuck.cygnus.com>
+
+ * interp.c (sim_open): Undo patch to add -E support.
+
+Fri Apr 18 13:39:01 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * interp.c (sim_stop): New function.
+
+Thu Apr 17 02:42:00 1997 Doug Evans <dje@canuck.cygnus.com>
+
+ * Makefile.in (SIM_OBJS): Add sim-load.o.
+ * d10v_sim.h (exec_bfd): Rename to prog_bfd.
+ * interp.c: #include bfd.h.
+ (myname, sim_kind, start_address): New static locals.
+ (prog_bfd_was_opened_p, prog_bfd): New static locals.
+ (decode_pc): Update to use prog_bfd.
+ (sim_open): Set sim_kind, myname. Ignore -E arg.
+ (sim_close): Close prog_bfd if simulator opened it.
+ (sim_create_inferior): Return SIM_RC. Delete arg start_address.
+ (sim_load): Return SIM_RC. New arg abfd. Set start address from bfd.
+ Call sim_load_file to load file into simulator.
+ * simops.c (trace_input_func): exec_bfd renamed to prog_bfd.
+
+Wed Apr 16 16:12:03 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * simops.c (OP_5F00): Only provide system calls SYS_execv,
+ SYS_wait, SYS_wait, SYS_utime, SYS_time if defined by the host.
+
+Mon Apr 7 15:45:02 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+ * config.in: Ditto.
+
+Wed Apr 2 15:06:28 1997 Doug Evans <dje@canuck.cygnus.com>
+
+ * interp.c (sim_open): New arg `kind'.
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Wed Apr 2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Mon Mar 17 15:10:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
+
+ * configure: Re-generate.
+
+Fri Mar 14 10:34:11 1997 Michael Meissner <meissner@cygnus.com>
+
+ * configure: Regenerate to track ../common/aclocal.m4 changes.
+
+ * simops.c (OP_5F00): Remove old traps 1-3. Make trap 15 the same
+ as trap 0, which will be deprecated. Only set errno, if an error
+ in fact was returned.
+
+Thu Mar 13 12:41:20 1997 Doug Evans <dje@canuck.cygnus.com>
+
+ * interp.c: Delete redundant prototypes of sim_foo fns.
+ (sim_open): New SIM_DESC result. Argument is now in argv form.
+ (other sim_*): New SIM_DESC argument.
+
+Thu Mar 13 10:29:04 1997 Michael Meissner <meissner@cygnus.com>
+
+ * simops.c (trace_{input,output}_func): Call flush_stdout from the
+ callback functions.
+ (OP_5F00): Ditto.
+ (OP_6{4,6,C,A}01): Test for post decrement on the stack pointer.
+ (OP_{1200,1000000,201,5FE0,1003,17001002}): Fix problems in
+ setting the carry bit after an add or a subtract.
+
+Wed Feb 12 16:04:15 1997 Michael Meissner <meissner@cygnus.com>
+
+ * simops.c (OP_{1403,15002A02,3{0,4}0{0,1}}): Only use the bottom
+ 40 bits of accumulators. Sign/zero extend as appropriate.
+
+Tue Feb 4 13:33:30 1997 Doug Evans <dje@canuck.cygnus.com>
+
+ * Makefile.in (@COMMON_MAKEFILE_FRAG): Use
+ COMMON_{PRE,POST}_CONFIG_FRAG instead.
+ * configure.in: sinclude ../common/aclocal.m4.
+ * configure: Regenerated.
+
+Thu Jan 23 11:46:23 1997 Stu Grossman (grossman@critters.cygnus.com)
+
+ * configure configure.in Makefile.in: Update to new configure
+ scheme which is more compatible with WinGDB builds.
+ * configure.in: Improve comment on how to run autoconf.
+ * configure: Re-run autoconf to get new ../common/aclocal.m4.
+ * Makefile.in: Use autoconf substitution to install common
+ makefile fragment.
+
+Fri Dec 27 22:54:05 1996 Angela Marie Thomas (angela@cygnus.com)
+
+ * gencode.c: patch to not #include "d10v_sim.h" which
+ unecessarily includes bfd.h and causes wingdb configure
+ to fail.
+
+Mon Dec 16 13:39:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
+
+ * interp.c (xfer_mem): Change unified memory to 0x0.
+
+Thu Nov 28 20:42:56 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * simops.c (OP_3E01): Fix tracing information.
+ (OP_300{0,1}): Do not propigate sign.
+
+Mon Nov 25 19:47:40 1996 Doug Evans <dje@canuck.cygnus.com>
+
+ * config.in (WORDS_BIGENDIAN): Add.
+ * configure: Regenerated.
+ * d10v_sim.h: #include "config.h"
+
+Sat Nov 23 09:34:50 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * gencode.c (write_opcodes): Eliminate warnings when generated
+ table.c is compiled.
+
+Wed Nov 20 19:41:40 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * interp.c (sim_open): Cast result of calloc, and make sure NULL
+ was not returned.
+ (dmem_addr): If address is illegal or in I/O space, signal a bus
+ error.
+ (pc_addr): Signal bus error, not illegal instruction for bogus
+ pc.
+
+Wed Nov 20 01:23:03 1996 Doug Evans <dje@canuck.cygnus.com>
+
+ * Makefile.in: Delete all stuff moved to ../common/Make-common.in.
+ (SIM_OBJS,SIM_EXTRA_CFLAGS,SIM_EXTRA_CLEAN): Define.
+ * configure.in: Simplify using macros in ../common/aclocal.m4.
+ Call AC_CHECK_HEADERS(unistd.h).
+ * configure: Regenerated.
+ * config.in: New file.
+ * interp.c: #include "callback.h".
+ * simops.c: #include "config.h". #include <unistd.h> if present.
+
+Fri Nov 8 16:19:55 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
+
+ * d10v-sim.h (simops): Add flag is_long.
+ (State): Add pc_changed. Instructions which update the PC should
+ use the JMP macro which sets this.
+ (JMP): New macro. Sets the PC and the pc_changed flag.
+
+ * gencode.c (write_opcodes): Add is_long field.
+
+ * interp.c (lookup_hash): If we blindly apply a short opcode's mask
+ to a long opcode we could get a false match. Check the opcode size.
+ (hash): Add a size field to the hash table.
+ (sim_open): Initialize size field in hash table.
+ (sim_resume): Change to logic for setting the PC. Used to increment the
+ PC if it had not been changed. This didn't allow single-instruction loops.
+ Now checks the flag State.pc_changed. Also now stops when ^C is received.
+ (dmem_addr): Fix translation of data segments to unified memory.
+ (sim_ctrl_c): New function. When ^C is received, set stop_simulator flag.
+
+ * simops.c: Changed all branch and jump instructions to use new JMP macro.
+ (OP_20000000): Corrected trace information to show this is a ldi.l, not
+ a ldi.s instruction.
+
+Thu Oct 31 19:13:55 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
+
+ * interp.c (sim_fetch_register, sim_store_register): Fix bug where
+ updating the accumulators was overwriting other parts of the global
+ State variable.
+
+Wed Oct 30 17:35:14 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * interp.c (bfd.h) Don't include it here any more.
+ (text{,_start,_end}): Move here from simops.c and make extern.
+ (decode_pc): New function to return the PC as an address that the
+ debugger can use.
+ (dmem_addr): Print decoded PC in error message.
+ (pc_addr): Ditto.
+
+ * simops.c (bfd.h) Don't include it here any more.
+ (text{,_start,_end}): Move to simops.c.
+ (trace_input_func): Move decoding of PC, and looking up .text
+ start to decode_pc.
+
+ * d10v_sim.h (bfd.h): Include it here.
+ (text{,_start,_end}): Add external declarations.
+ (exec_bfd): Ditto.
+ (decode_pc): Ditto.
+
+Tue Oct 29 12:13:52 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
+
+ * interp.c (sim_size): Now allocates unified memory for imap segments
+ 0,1,2, and 127. Initializes imap0 and imap1 to 0x1000. Initializes dmap to 0.
+ (sim_write): Just call xfer_mem().
+ (sim_read): Just call xfer_mem().
+ (xfer_mem): New function. Does appropriate memory mapping and copies bytes.
+ (dmem_addr): New function. Reads dmap register and translates data
+ addresses to local addresses.
+ (pc_addr): New function. Reads imap register and computes local address
+ corresponding to contents of the PC.
+ (sim_resume): Change to use pc_addr().
+ (sim_create_inferior): Change reinitialization code. Also reinitializes
+ imap[01] and dmap.
+ (sim_fetch_register): Add fake registers 32,33,34 for imap0, imap1, and dmap.
+ (sim_store_register): Add fake registers 32,33,34 for imap0, imap1, and dmap.
+
+ * simops.c (MEMPTR): Redefine to use dmem_addr().
+ (OP_5F00): Replace references to STate.imem with dmem_addr().
+
+ * d10v-sim.h (State): Remove mem_min and mem_max. Add umem[128].
+ (RB,SW,RW,SLW,RLW): Redefine to use dmem_addr().
+ (IMAP0,IMAP1,DMAP,SET_IMAP,SET_IMAP1,SET_DMAP): Define.
+
+Tue Oct 22 15:22:33 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * d10v_sim.h (_ins_type): Reorganize, so that we can provide
+ better statistics, like not counting NOPS as parallel
+ instructions, and printing total cycles.
+ (ins_type_counters): Make unsigned long.
+ (left_nops,right_nops): Fold into ins_type_counters.
+
+ * simops.c (trace_input_func): Print new instruction types.
+ Handle OP_R2R3 as input types.
+ (OP_{38000000,7000}): Correctly sign extend bytes.
+ (OP_5E00): Don't count NOPs as parallel instructions.
+ (OP_460B): Remove unused variable.
+ (OP_5F00): Ditto.
+
+ * interp.c (ins_type_counters): Make unsigned long.
+ (left_nops,right_nops): Delete.
+ (most functions): Add prototypes.
+ (INLINE): If GCC and optimize define as __inline__.
+ ({,lookup_}hash,get_operands): Declare as INLINE.
+ (do_parallel): Count conditional operations.
+ (add_commas): New function, to add commas every 3 digits.
+ (sim_size): Call add_commas to print numbers.
+ (sim_{open,resume}): Delete unused variables.
+ (sim_info): Provide better statistics.
+ (sim_read): Add int return type.
+
+Mon Oct 21 16:16:26 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
+
+ * interp.c (sim_resume): Change the way single-stepping and exceptions
+ are handled so single-stepping works again.
+
+Thu Oct 17 12:24:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * endian.c: Optimize simulated loads/stores on x86, AIX, and big
+ endian hosts.
+
+ * configure.in (--enable-sim-bswap): New switch to enable using
+ the BSWAP instruction on x86's.
+ * configure: Regenerate.
+
+ * Makefile.in ({SWAP,CONFIG}_CFLAGS): Add --enable-sim-bswap
+ support.
+