- case fmt_uninterpreted:
- case fmt_double:
- case fmt_long:
- if ((fpr & 1) == 0) { /* even registers only */
- value = ((((uword64)FGR[fpr+1]) << 32) | (FGR[fpr] & 0xFFFFFFFF));
- } else {
- SignalException(ReservedInstruction,0);
- }
- break;
-
- default :
- err = -1;
- break;
- }
- }
-
- if (err)
- SignalExceptionSimulatorFault ("Unrecognised FP format in ValueFPR()");
-
-#ifdef DEBUG
- printf("DBG: ValueFPR: fpr = %d, fmt = %s, value = 0x%s : PC = 0x%s : SizeFGR() = %d\n",fpr,DOFMT(fmt),pr_addr(value),pr_addr(cia),SizeFGR());
-#endif /* DEBUG */
-
- return(value);
-}
-
-void
-store_fpr (SIM_DESC sd,
- sim_cpu *cpu,
- address_word cia,
- int fpr,
- FP_formats fmt,
- uword64 value)
-{
- int err = 0;
-
-#ifdef DEBUG
- printf("DBG: StoreFPR: fpr = %d, fmt = %s, value = 0x%s : PC = 0x%s : SizeFGR() = %d\n",fpr,DOFMT(fmt),pr_addr(value),pr_addr(cia),SizeFGR());
-#endif /* DEBUG */
-
- if (SizeFGR() == 64) {
- switch (fmt) {
- case fmt_uninterpreted_32:
- fmt = fmt_uninterpreted;
- case fmt_single :
- case fmt_word :
- FGR[fpr] = (((uword64)0xDEADC0DE << 32) | (value & 0xFFFFFFFF));
- FPR_STATE[fpr] = fmt;
- break;
-
- case fmt_uninterpreted_64:
- fmt = fmt_uninterpreted;
- case fmt_uninterpreted:
- case fmt_double :
- case fmt_long :
- FGR[fpr] = value;
- FPR_STATE[fpr] = fmt;
- break;
-
- default :
- FPR_STATE[fpr] = fmt_unknown;
- err = -1;
- break;
- }
- } else {
- switch (fmt) {
- case fmt_uninterpreted_32:
- fmt = fmt_uninterpreted;
- case fmt_single :
- case fmt_word :
- FGR[fpr] = (value & 0xFFFFFFFF);
- FPR_STATE[fpr] = fmt;
- break;
-
- case fmt_uninterpreted_64:
- fmt = fmt_uninterpreted;
- case fmt_uninterpreted:
- case fmt_double :
- case fmt_long :
- if ((fpr & 1) == 0) { /* even register number only */
- FGR[fpr+1] = (value >> 32);
- FGR[fpr] = (value & 0xFFFFFFFF);
- FPR_STATE[fpr + 1] = fmt;
- FPR_STATE[fpr] = fmt;
- } else {
- FPR_STATE[fpr] = fmt_unknown;
- FPR_STATE[fpr + 1] = fmt_unknown;
- SignalException(ReservedInstruction,0);
- }
- break;
-
- default :
- FPR_STATE[fpr] = fmt_unknown;
- err = -1;
- break;
- }
- }
-#if defined(WARN_RESULT)
- else
- UndefinedResult();
-#endif /* WARN_RESULT */
-
- if (err)
- SignalExceptionSimulatorFault ("Unrecognised FP format in StoreFPR()");
-
-#ifdef DEBUG
- printf("DBG: StoreFPR: fpr[%d] = 0x%s (format %s)\n",fpr,pr_addr(FGR[fpr]),DOFMT(fmt));
-#endif /* DEBUG */
-
- return;
-}
-
-int
-NaN(op,fmt)
- uword64 op;
- FP_formats fmt;
-{
- int boolean = 0;
- switch (fmt) {
- case fmt_single:
- case fmt_word:
- {
- sim_fpu wop;
- sim_fpu_32to (&wop, op);
- boolean = sim_fpu_is_nan (&wop);
- break;
- }
- case fmt_double:
- case fmt_long:
- {
- sim_fpu wop;
- sim_fpu_64to (&wop, op);
- boolean = sim_fpu_is_nan (&wop);
- break;
- }
- default:
- fprintf (stderr, "Bad switch\n");
- abort ();
- }
-
-#ifdef DEBUG
-printf("DBG: NaN: returning %d for 0x%s (format = %s)\n",boolean,pr_addr(op),DOFMT(fmt));
-#endif /* DEBUG */
-
- return(boolean);
-}
-
-int
-Infinity(op,fmt)
- uword64 op;
- FP_formats fmt;
-{
- int boolean = 0;
-
-#ifdef DEBUG
- printf("DBG: Infinity: format %s 0x%s\n",DOFMT(fmt),pr_addr(op));
-#endif /* DEBUG */
-
- switch (fmt) {
- case fmt_single:
- {
- sim_fpu wop;
- sim_fpu_32to (&wop, op);
- boolean = sim_fpu_is_infinity (&wop);
- break;
- }
- case fmt_double:
- {
- sim_fpu wop;
- sim_fpu_64to (&wop, op);
- boolean = sim_fpu_is_infinity (&wop);
- break;
- }
- default:
- printf("DBG: TODO: unrecognised format (%s) for Infinity check\n",DOFMT(fmt));
- break;
- }
-
-#ifdef DEBUG
- printf("DBG: Infinity: returning %d for 0x%s (format = %s)\n",boolean,pr_addr(op),DOFMT(fmt));
-#endif /* DEBUG */
-
- return(boolean);
-}
-
-int
-Less(op1,op2,fmt)
- uword64 op1;
- uword64 op2;
- FP_formats fmt;
-{
- int boolean = 0;
-
- /* Argument checking already performed by the FPCOMPARE code */
-
-#ifdef DEBUG
- printf("DBG: Less: %s: op1 = 0x%s : op2 = 0x%s\n",DOFMT(fmt),pr_addr(op1),pr_addr(op2));
-#endif /* DEBUG */
-
- /* The format type should already have been checked: */
- switch (fmt) {
- case fmt_single:
- {
- sim_fpu wop1;
- sim_fpu wop2;
- sim_fpu_32to (&wop1, op1);
- sim_fpu_32to (&wop2, op2);
- boolean = sim_fpu_is_lt (&wop1, &wop2);
- break;
- }
- case fmt_double:
- {
- sim_fpu wop1;
- sim_fpu wop2;
- sim_fpu_64to (&wop1, op1);
- sim_fpu_64to (&wop2, op2);
- boolean = sim_fpu_is_lt (&wop1, &wop2);
- break;
- }
- default:
- fprintf (stderr, "Bad switch\n");
- abort ();
- }
-
-#ifdef DEBUG
- printf("DBG: Less: returning %d (format = %s)\n",boolean,DOFMT(fmt));
-#endif /* DEBUG */
-
- return(boolean);
-}
-
-int
-Equal(op1,op2,fmt)
- uword64 op1;
- uword64 op2;
- FP_formats fmt;
-{
- int boolean = 0;
-
- /* Argument checking already performed by the FPCOMPARE code */
-
-#ifdef DEBUG
- printf("DBG: Equal: %s: op1 = 0x%s : op2 = 0x%s\n",DOFMT(fmt),pr_addr(op1),pr_addr(op2));
-#endif /* DEBUG */
-
- /* The format type should already have been checked: */
- switch (fmt) {
- case fmt_single:
- {
- sim_fpu wop1;
- sim_fpu wop2;
- sim_fpu_32to (&wop1, op1);
- sim_fpu_32to (&wop2, op2);
- boolean = sim_fpu_is_eq (&wop1, &wop2);
- break;
- }
- case fmt_double:
- {
- sim_fpu wop1;
- sim_fpu wop2;
- sim_fpu_64to (&wop1, op1);
- sim_fpu_64to (&wop2, op2);
- boolean = sim_fpu_is_eq (&wop1, &wop2);
- break;
- }
- default:
- fprintf (stderr, "Bad switch\n");
- abort ();
- }
-
-#ifdef DEBUG
- printf("DBG: Equal: returning %d (format = %s)\n",boolean,DOFMT(fmt));
-#endif /* DEBUG */
-
- return(boolean);
-}
-
-uword64
-AbsoluteValue(op,fmt)
- uword64 op;
- FP_formats fmt;
-{
- uword64 result = 0;
-
-#ifdef DEBUG
- printf("DBG: AbsoluteValue: %s: op = 0x%s\n",DOFMT(fmt),pr_addr(op));
-#endif /* DEBUG */
-
- /* The format type should already have been checked: */
- switch (fmt) {
- case fmt_single:
- {
- sim_fpu wop;
- unsigned32 ans;
- sim_fpu_32to (&wop, op);
- sim_fpu_abs (&wop, &wop);
- sim_fpu_to32 (&ans, &wop);
- result = ans;
- break;
- }
- case fmt_double:
- {
- sim_fpu wop;
- unsigned64 ans;
- sim_fpu_64to (&wop, op);
- sim_fpu_abs (&wop, &wop);
- sim_fpu_to64 (&ans, &wop);
- result = ans;
- break;
- }
- default:
- fprintf (stderr, "Bad switch\n");
- abort ();
- }
-
- return(result);
-}
-
-uword64
-Negate(op,fmt)
- uword64 op;
- FP_formats fmt;
-{
- uword64 result = 0;
-
-#ifdef DEBUG
- printf("DBG: Negate: %s: op = 0x%s\n",DOFMT(fmt),pr_addr(op));
-#endif /* DEBUG */
-
- /* The format type should already have been checked: */
- switch (fmt) {
- case fmt_single:
- {
- sim_fpu wop;
- unsigned32 ans;
- sim_fpu_32to (&wop, op);
- sim_fpu_neg (&wop, &wop);
- sim_fpu_to32 (&ans, &wop);
- result = ans;
- break;
- }
- case fmt_double:
- {
- sim_fpu wop;
- unsigned64 ans;
- sim_fpu_64to (&wop, op);
- sim_fpu_neg (&wop, &wop);
- sim_fpu_to64 (&ans, &wop);
- result = ans;
- break;
- }
- default:
- fprintf (stderr, "Bad switch\n");
- abort ();
- }
-
- return(result);
-}
-
-uword64
-Add(op1,op2,fmt)
- uword64 op1;
- uword64 op2;
- FP_formats fmt;
-{
- uword64 result = 0;
-
-#ifdef DEBUG
- printf("DBG: Add: %s: op1 = 0x%s : op2 = 0x%s\n",DOFMT(fmt),pr_addr(op1),pr_addr(op2));
-#endif /* DEBUG */
-
- /* The registers must specify FPRs valid for operands of type
- "fmt". If they are not valid, the result is undefined. */
-
- /* The format type should already have been checked: */
- switch (fmt) {
- case fmt_single:
- {
- sim_fpu wop1;
- sim_fpu wop2;
- sim_fpu ans;
- unsigned32 res;
- sim_fpu_32to (&wop1, op1);
- sim_fpu_32to (&wop2, op2);
- sim_fpu_add (&ans, &wop1, &wop2);
- sim_fpu_to32 (&res, &ans);
- result = res;
- break;
- }
- case fmt_double:
- {
- sim_fpu wop1;
- sim_fpu wop2;
- sim_fpu ans;
- unsigned64 res;
- sim_fpu_64to (&wop1, op1);
- sim_fpu_64to (&wop2, op2);
- sim_fpu_add (&ans, &wop1, &wop2);
- sim_fpu_to64 (&res, &ans);
- result = res;
- break;
- }
- default:
- fprintf (stderr, "Bad switch\n");
- abort ();
- }
-
-#ifdef DEBUG
- printf("DBG: Add: returning 0x%s (format = %s)\n",pr_addr(result),DOFMT(fmt));
-#endif /* DEBUG */
-
- return(result);
-}
-
-uword64
-Sub(op1,op2,fmt)
- uword64 op1;
- uword64 op2;
- FP_formats fmt;
-{
- uword64 result = 0;
-
-#ifdef DEBUG
- printf("DBG: Sub: %s: op1 = 0x%s : op2 = 0x%s\n",DOFMT(fmt),pr_addr(op1),pr_addr(op2));
-#endif /* DEBUG */
-
- /* The registers must specify FPRs valid for operands of type
- "fmt". If they are not valid, the result is undefined. */
-
- /* The format type should already have been checked: */
- switch (fmt) {
- case fmt_single:
- {
- sim_fpu wop1;
- sim_fpu wop2;
- sim_fpu ans;
- unsigned32 res;
- sim_fpu_32to (&wop1, op1);
- sim_fpu_32to (&wop2, op2);
- sim_fpu_sub (&ans, &wop1, &wop2);
- sim_fpu_to32 (&res, &ans);
- result = res;
- }
- break;
- case fmt_double:
- {
- sim_fpu wop1;
- sim_fpu wop2;
- sim_fpu ans;
- unsigned64 res;
- sim_fpu_64to (&wop1, op1);
- sim_fpu_64to (&wop2, op2);
- sim_fpu_sub (&ans, &wop1, &wop2);
- sim_fpu_to64 (&res, &ans);
- result = res;
- }
- break;
- default:
- fprintf (stderr, "Bad switch\n");
- abort ();
- }
-
-#ifdef DEBUG
- printf("DBG: Sub: returning 0x%s (format = %s)\n",pr_addr(result),DOFMT(fmt));
-#endif /* DEBUG */
-
- return(result);
-}
-
-uword64
-Multiply(op1,op2,fmt)
- uword64 op1;
- uword64 op2;
- FP_formats fmt;
-{
- uword64 result = 0;
-
-#ifdef DEBUG
- printf("DBG: Multiply: %s: op1 = 0x%s : op2 = 0x%s\n",DOFMT(fmt),pr_addr(op1),pr_addr(op2));
-#endif /* DEBUG */
-
- /* The registers must specify FPRs valid for operands of type
- "fmt". If they are not valid, the result is undefined. */
-
- /* The format type should already have been checked: */
- switch (fmt) {
- case fmt_single:
- {
- sim_fpu wop1;
- sim_fpu wop2;
- sim_fpu ans;
- unsigned32 res;
- sim_fpu_32to (&wop1, op1);
- sim_fpu_32to (&wop2, op2);
- sim_fpu_mul (&ans, &wop1, &wop2);
- sim_fpu_to32 (&res, &ans);
- result = res;
- break;
- }
- case fmt_double:
- {
- sim_fpu wop1;
- sim_fpu wop2;
- sim_fpu ans;
- unsigned64 res;
- sim_fpu_64to (&wop1, op1);
- sim_fpu_64to (&wop2, op2);
- sim_fpu_mul (&ans, &wop1, &wop2);
- sim_fpu_to64 (&res, &ans);
- result = res;
- break;
- }
- default:
- fprintf (stderr, "Bad switch\n");
- abort ();
- }
-
-#ifdef DEBUG
- printf("DBG: Multiply: returning 0x%s (format = %s)\n",pr_addr(result),DOFMT(fmt));
-#endif /* DEBUG */
-
- return(result);
-}
-
-uword64
-Divide(op1,op2,fmt)
- uword64 op1;
- uword64 op2;
- FP_formats fmt;
-{
- uword64 result = 0;
-
-#ifdef DEBUG
- printf("DBG: Divide: %s: op1 = 0x%s : op2 = 0x%s\n",DOFMT(fmt),pr_addr(op1),pr_addr(op2));
-#endif /* DEBUG */
-
- /* The registers must specify FPRs valid for operands of type
- "fmt". If they are not valid, the result is undefined. */
-
- /* The format type should already have been checked: */
- switch (fmt) {
- case fmt_single:
- {
- sim_fpu wop1;
- sim_fpu wop2;
- sim_fpu ans;
- unsigned32 res;
- sim_fpu_32to (&wop1, op1);
- sim_fpu_32to (&wop2, op2);
- sim_fpu_div (&ans, &wop1, &wop2);
- sim_fpu_to32 (&res, &ans);
- result = res;
- break;
- }
- case fmt_double:
- {
- sim_fpu wop1;
- sim_fpu wop2;
- sim_fpu ans;
- unsigned64 res;
- sim_fpu_64to (&wop1, op1);
- sim_fpu_64to (&wop2, op2);
- sim_fpu_div (&ans, &wop1, &wop2);
- sim_fpu_to64 (&res, &ans);
- result = res;
- break;
- }
- default:
- fprintf (stderr, "Bad switch\n");
- abort ();
- }
-
-#ifdef DEBUG
- printf("DBG: Divide: returning 0x%s (format = %s)\n",pr_addr(result),DOFMT(fmt));
-#endif /* DEBUG */
-
- return(result);
-}
-
-uword64 UNUSED
-Recip(op,fmt)
- uword64 op;
- FP_formats fmt;
-{
- uword64 result = 0;
-
-#ifdef DEBUG
- printf("DBG: Recip: %s: op = 0x%s\n",DOFMT(fmt),pr_addr(op));
-#endif /* DEBUG */
-
- /* The registers must specify FPRs valid for operands of type
- "fmt". If they are not valid, the result is undefined. */
-
- /* The format type should already have been checked: */
- switch (fmt) {
- case fmt_single:
- {
- sim_fpu wop;
- sim_fpu ans;
- unsigned32 res;
- sim_fpu_32to (&wop, op);
- sim_fpu_inv (&ans, &wop);
- sim_fpu_to32 (&res, &ans);
- result = res;
- break;
- }
- case fmt_double:
- {
- sim_fpu wop;
- sim_fpu ans;
- unsigned64 res;
- sim_fpu_64to (&wop, op);
- sim_fpu_inv (&ans, &wop);
- sim_fpu_to64 (&res, &ans);
- result = res;
- break;
- }
- default:
- fprintf (stderr, "Bad switch\n");
- abort ();
- }
-
-#ifdef DEBUG
- printf("DBG: Recip: returning 0x%s (format = %s)\n",pr_addr(result),DOFMT(fmt));
-#endif /* DEBUG */
-
- return(result);
-}
-
-uword64
-SquareRoot(op,fmt)
- uword64 op;
- FP_formats fmt;
-{
- uword64 result = 0;
-
-#ifdef DEBUG
- printf("DBG: SquareRoot: %s: op = 0x%s\n",DOFMT(fmt),pr_addr(op));
-#endif /* DEBUG */
-
- /* The registers must specify FPRs valid for operands of type
- "fmt". If they are not valid, the result is undefined. */
-
- /* The format type should already have been checked: */
- switch (fmt) {
- case fmt_single:
- {
- sim_fpu wop;
- sim_fpu ans;
- unsigned32 res;
- sim_fpu_32to (&wop, op);
- sim_fpu_sqrt (&ans, &wop);
- sim_fpu_to32 (&res, &ans);
- result = res;
- break;
- }
- case fmt_double:
- {
- sim_fpu wop;
- sim_fpu ans;
- unsigned64 res;
- sim_fpu_64to (&wop, op);
- sim_fpu_sqrt (&ans, &wop);
- sim_fpu_to64 (&res, &ans);
- result = res;
- break;
- }
- default:
- fprintf (stderr, "Bad switch\n");
- abort ();
- }
-
-#ifdef DEBUG
- printf("DBG: SquareRoot: returning 0x%s (format = %s)\n",pr_addr(result),DOFMT(fmt));
-#endif /* DEBUG */
-
- return(result);
-}
-
-#if 0
-uword64
-Max (uword64 op1,
- uword64 op2,
- FP_formats fmt)
-{
- int cmp;
- unsigned64 result;
-
-#ifdef DEBUG
- printf("DBG: Max: %s: op1 = 0x%s : op2 = 0x%s\n",DOFMT(fmt),pr_addr(op1),pr_addr(op2));
-#endif /* DEBUG */
-
- /* The registers must specify FPRs valid for operands of type
- "fmt". If they are not valid, the result is undefined. */
-
- /* The format type should already have been checked: */
- switch (fmt)
- {
- case fmt_single:
- {
- sim_fpu wop1;
- sim_fpu wop2;
- sim_fpu_32to (&wop1, op1);
- sim_fpu_32to (&wop2, op2);
- cmp = sim_fpu_cmp (&wop1, &wop2);
- break;
- }
- case fmt_double:
- {
- sim_fpu wop1;
- sim_fpu wop2;
- sim_fpu_64to (&wop1, op1);
- sim_fpu_64to (&wop2, op2);
- cmp = sim_fpu_cmp (&wop1, &wop2);
- break;
- }
- default:
- fprintf (stderr, "Bad switch\n");
- abort ();
- }
-
- switch (cmp)
- {
- case SIM_FPU_IS_SNAN:
- case SIM_FPU_IS_QNAN:
- result = op1;
- case SIM_FPU_IS_NINF:
- case SIM_FPU_IS_NNUMBER:
- case SIM_FPU_IS_NDENORM:
- case SIM_FPU_IS_NZERO:
- result = op2; /* op1 - op2 < 0 */
- case SIM_FPU_IS_PINF:
- case SIM_FPU_IS_PNUMBER:
- case SIM_FPU_IS_PDENORM:
- case SIM_FPU_IS_PZERO:
- result = op1; /* op1 - op2 > 0 */
- default:
- fprintf (stderr, "Bad switch\n");
- abort ();
- }
-
-#ifdef DEBUG
- printf("DBG: Max: returning 0x%s (format = %s)\n",pr_addr(result),DOFMT(fmt));
-#endif /* DEBUG */
-
- return(result);
-}
-#endif
-
-#if 0
-uword64
-Min (uword64 op1,
- uword64 op2,
- FP_formats fmt)
-{
- int cmp;
- unsigned64 result;
-
-#ifdef DEBUG
- printf("DBG: Min: %s: op1 = 0x%s : op2 = 0x%s\n",DOFMT(fmt),pr_addr(op1),pr_addr(op2));
-#endif /* DEBUG */
-
- /* The registers must specify FPRs valid for operands of type
- "fmt". If they are not valid, the result is undefined. */
-
- /* The format type should already have been checked: */
- switch (fmt)
- {
- case fmt_single:
- {
- sim_fpu wop1;
- sim_fpu wop2;
- sim_fpu_32to (&wop1, op1);
- sim_fpu_32to (&wop2, op2);
- cmp = sim_fpu_cmp (&wop1, &wop2);
- break;
- }
- case fmt_double:
- {
- sim_fpu wop1;
- sim_fpu wop2;
- sim_fpu_64to (&wop1, op1);
- sim_fpu_64to (&wop2, op2);
- cmp = sim_fpu_cmp (&wop1, &wop2);
- break;
- }
- default:
- fprintf (stderr, "Bad switch\n");
- abort ();
- }
-
- switch (cmp)
- {
- case SIM_FPU_IS_SNAN:
- case SIM_FPU_IS_QNAN:
- result = op1;
- case SIM_FPU_IS_NINF:
- case SIM_FPU_IS_NNUMBER:
- case SIM_FPU_IS_NDENORM:
- case SIM_FPU_IS_NZERO:
- result = op1; /* op1 - op2 < 0 */
- case SIM_FPU_IS_PINF:
- case SIM_FPU_IS_PNUMBER:
- case SIM_FPU_IS_PDENORM:
- case SIM_FPU_IS_PZERO:
- result = op2; /* op1 - op2 > 0 */
- default:
- fprintf (stderr, "Bad switch\n");
- abort ();
- }
-
-#ifdef DEBUG
- printf("DBG: Min: returning 0x%s (format = %s)\n",pr_addr(result),DOFMT(fmt));
-#endif /* DEBUG */
-
- return(result);
-}
-#endif
-
-uword64
-convert (SIM_DESC sd,
- sim_cpu *cpu,
- address_word cia,
- int rm,
- uword64 op,
- FP_formats from,
- FP_formats to)
-{
- sim_fpu wop;
- sim_fpu_round round;
- unsigned32 result32;
- unsigned64 result64;
-
-#ifdef DEBUG
- printf("DBG: Convert: mode %s : op 0x%s : from %s : to %s : (PC = 0x%s)\n",RMMODE(rm),pr_addr(op),DOFMT(from),DOFMT(to),pr_addr(IPC));
-#endif /* DEBUG */
-
- switch (rm)
- {
- case FP_RM_NEAREST:
- /* Round result to nearest representable value. When two
- representable values are equally near, round to the value
- that has a least significant bit of zero (i.e. is even). */
- round = sim_fpu_round_near;
- break;
- case FP_RM_TOZERO:
- /* Round result to the value closest to, and not greater in
- magnitude than, the result. */
- round = sim_fpu_round_zero;
- break;
- case FP_RM_TOPINF:
- /* Round result to the value closest to, and not less than,
- the result. */
- round = sim_fpu_round_up;
- break;
-
- case FP_RM_TOMINF:
- /* Round result to the value closest to, and not greater than,
- the result. */
- round = sim_fpu_round_down;
- break;
- default:
- round = 0;
- fprintf (stderr, "Bad switch\n");
- abort ();
- }
-
- /* Convert the input to sim_fpu internal format */
- switch (from)
- {
- case fmt_double:
- sim_fpu_64to (&wop, op);
- break;
- case fmt_single:
- sim_fpu_32to (&wop, op);
- break;
- case fmt_word:
- sim_fpu_i32to (&wop, op, round);
- break;
- case fmt_long:
- sim_fpu_i64to (&wop, op, round);
- break;
- default:
- fprintf (stderr, "Bad switch\n");
- abort ();
- }
-
- /* Convert sim_fpu format into the output */
- /* The value WOP is converted to the destination format, rounding
- using mode RM. When the destination is a fixed-point format, then
- a source value of Infinity, NaN or one which would round to an
- integer outside the fixed point range then an IEEE Invalid
- Operation condition is raised. */
- switch (to)
- {
- case fmt_single:
- sim_fpu_round_32 (&wop, round, 0);
- sim_fpu_to32 (&result32, &wop);
- result64 = result32;
- break;
- case fmt_double:
- sim_fpu_round_64 (&wop, round, 0);
- sim_fpu_to64 (&result64, &wop);
- break;
- case fmt_word:
- sim_fpu_to32i (&result32, &wop, round);
- result64 = result32;
- break;
- case fmt_long:
- sim_fpu_to64i (&result64, &wop, round);
- break;
- default:
- result64 = 0;
- fprintf (stderr, "Bad switch\n");
- abort ();
- }
-
-#ifdef DEBUG
- printf("DBG: Convert: returning 0x%s (to format = %s)\n",pr_addr(result64),DOFMT(to));
-#endif /* DEBUG */
-
- return(result64);
-}
-
-
-/*-- co-processor support routines ------------------------------------------*/
-
-static int UNUSED
-CoProcPresent(unsigned int coproc_number)
-{
- /* Return TRUE if simulator provides a model for the given co-processor number */
- return(0);
-}