keep_these_too="${keep_these_too} .cvsignore CYGNUS autoconf
apache bash
- bfd binutils byacc cvs deja-gnu dejagnu diff dosrel dvips emacs emacs19
- examples expect fileutils findutils flex
- gas gawk gcc gdb gdbm gdbtest glob gprof grep grez groff guile gzip
+ bfd binutils bison byacc cvs deja-gnu dejagnu diff dosrel dvips
+ emacs emacs19 examples expect fileutils findutils flex
+ gas gawk gcc gdb gdbm gdbtest glob gperf gprof grep grez groff guile gzip
include inet install-sh ispell
ld less libg++ libgcc libgloss libiberty libio librx libstdc++
m4 make mkinstalldirs mmalloc move-if-change newlib ncurses opcodes
texinfo tgas utils uudecode wdiff xiberty
configure.bat makeall.bat setup.com makefile.vms winsup
mpw-README mpw-configure mpw-config.in mpw-build.in mpw-install
- ltconfig ltmain.sh missing"
+ ltconfig ltmain.sh missing ylwrap"
lose_these_too="${lose_these_too} testsuite"
ide_files="itcl libide vmake"
if (echo $* | grep keep\-ide > /dev/null); then
- lose_these_too="${lose_these_too} ${ide_files}"
+ keep_these_too="${keep_these_too} ${ide_files}"
test -n "$verbose" && echo Keeping ${ide_files}
else
- keep_these_too="${keep_these_too} ${ide_files}"
+ lose_these_too="${lose_these_too} ${ide_files}"
fi
fi
if [ -n "${verbose}" ] ; then
- echo Processing \"arc\"...
+ echo Processing \"d30v\"...
fi
-arc_files="config.sub configure.in config-ml.in"
+d30v_files="ChangeLog config.sub configure.in"
-if ( echo $* | grep keep\-arc > /dev/null ) ; then
- for i in $arc_files ; do
- if test ! -d $i && (grep sanitize-arc $i > /dev/null) ; then
+if ( echo $* | grep keep\-d30v > /dev/null ) ; then
+ for i in $d30v_files ; do
+ if test ! -d $i && (grep sanitize-d30v $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
- echo Keeping arc stuff in $i
+ echo Keeping d30v stuff in $i
fi
fi
done
else
for i in * ; do
- if test ! -d $i && (grep sanitize-arc $i > /dev/null) ; then
+ if test ! -d $i && (grep sanitize-d30v $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
- echo Removing traces of \"arc\" from $i...
+ echo Removing traces of \"d30v\" from $i...
fi
cp $i new
- sed '/start\-sanitize\-arc/,/end-\sanitize\-arc/d' < $i > new
+ sed '/start\-sanitize\-d30v/,/end-\sanitize\-d30v/d' < $i > new
if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
if [ -n "${verbose}" ] ; then
echo Caching $i in .Recover...
fi
if [ -n "${verbose}" ] ; then
- echo Processing \"d30v\"...
+ echo Processing \"v850\"...
fi
-d30v_files="ChangeLog config.sub configure.in"
+v850_files="ChangeLog config.sub configure.in"
-if ( echo $* | grep keep\-d30v > /dev/null ) ; then
- for i in $d30v_files ; do
- if test ! -d $i && (grep sanitize-d30v $i > /dev/null) ; then
+if ( echo $* | grep keep\-v850 > /dev/null ) ; then
+ for i in $v850_files ; do
+ if test ! -d $i && (grep sanitize-v850 $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
- echo Keeping d30v stuff in $i
+ echo Keeping v850 stuff in $i
fi
fi
done
else
for i in * ; do
- if test ! -d $i && (grep sanitize-d30v $i > /dev/null) ; then
+ if test ! -d $i && (grep sanitize-v850 $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
- echo Removing traces of \"d30v\" from $i...
+ echo Removing traces of \"v850\" from $i...
fi
cp $i new
- sed '/start\-sanitize\-d30v/,/end-\sanitize\-d30v/d' < $i > new
+ sed '/start\-sanitize\-v850/,/end-\sanitize\-v850/d' < $i > new
if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
if [ -n "${verbose}" ] ; then
echo Caching $i in .Recover...
fi
done
fi
-
-if [ -n "${verbose}" ] ; then
- echo Processing \"v850\"...
+if ( echo $* | grep keep\-v850e > /dev/null ) ; then
+ for i in $v850_files ; do
+ if test ! -d $i && (grep sanitize-v850e $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Keeping v850e stuff in $i
+ fi
+ fi
+ done
+else
+ for i in * ; do
+ if test ! -d $i && (grep sanitize-v850e $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Removing traces of \"v850e\" from $i...
+ fi
+ cp $i new
+ sed '/start\-sanitize\-v850e/,/end-\sanitize\-v850e/d' < $i > new
+ if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+ if [ -n "${verbose}" ] ; then
+ echo Caching $i in .Recover...
+ fi
+ mv $i .Recover
+ fi
+ mv new $i
+ fi
+ done
fi
-
-v850_files="ChangeLog config.sub configure.in"
-
-if ( echo $* | grep keep\-v850 > /dev/null ) ; then
+if ( echo $* | grep keep\-v850eq > /dev/null ) ; then
for i in $v850_files ; do
- if test ! -d $i && (grep sanitize-v850 $i > /dev/null) ; then
+ if test ! -d $i && (grep sanitize-v850eq $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
- echo Keeping v850 stuff in $i
+ echo Keeping v850eq stuff in $i
fi
fi
done
else
for i in * ; do
- if test ! -d $i && (grep sanitize-v850 $i > /dev/null) ; then
+ if test ! -d $i && (grep sanitize-v850eq $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
- echo Removing traces of \"v850\" from $i...
+ echo Removing traces of \"v850eq\" from $i...
fi
cp $i new
- sed '/start\-sanitize\-v850/,/end-\sanitize\-v850/d' < $i > new
+ sed '/start\-sanitize\-v850eq/,/end-\sanitize\-v850eq/d' < $i > new
if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
if [ -n "${verbose}" ] ; then
echo Caching $i in .Recover...
done
fi
+tx19_files="ChangeLog config.sub"
+
+if ( echo $* | grep keep\-tx19 > /dev/null ) ; then
+ for i in $tx19_files ; do
+ if test ! -d $i && (grep sanitize-tx19 $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Keeping tx19 stuff in $i
+ fi
+ fi
+ done
+else
+ for i in * ; do
+ if test ! -d $i && (grep sanitize-tx19 $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Removing traces of \"tx19\" from $i...
+ fi
+ cp $i new
+ sed '/start\-sanitize\-tx19/,/end-\sanitize\-tx19/d' < $i > new
+ if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+ if [ -n "${verbose}" ] ; then
+ echo Caching $i in .Recover...
+ fi
+ mv $i .Recover
+ fi
+ mv new $i
+ fi
+ done
+fi
+
tic80_files="ChangeLog config.sub configure.in"
if ( echo $* | grep keep\-tic80 > /dev/null ) ; then
done
fi
-if ( echo $* | grep lose\-gdbtk > /dev/null ) ; then
- echo Catering to RMS by removing traces of \"gdbtk\"...
- if [ -n "${verbose}" ] ; then
- echo Removing traces of \"gdbtk\" from Makefile.in...
- fi
- cp Makefile.in new
- sed -e '/GDBTK_SUPPORT_DIRS=/d' -e 's/ $(GDBTK_SUPPORT_DIRS)//' < Makefile.in > new
- if [ -n "${safe}" -a ! -f .Recover/Makefile.in ] ; then
- if [ -n "${verbose}" ] ; then
- echo Caching Makefile.in in .Recover...
- fi
- mv Makefile.in .Recover
- fi
- mv new Makefile.in
-fi
-
if ( echo $* | grep keep\-gm > /dev/null ) ; then
for i in * ; do
if test ! -d $i && (grep sanitize-gm $i > /dev/null) ; then
done
fi
+if ( echo $* | grep lose\-gdbtk > /dev/null ) ; then
+ echo Catering to RMS by removing traces of \"gdbtk\"...
+ if [ -n "${verbose}" ] ; then
+ echo Removing traces of \"gdbtk\" from Makefile.in...
+ fi
+ cp Makefile.in new
+ sed -e '/GDBTK_SUPPORT_DIRS=/d' -e 's/ $(GDBTK_SUPPORT_DIRS)//' < Makefile.in > new
+ if [ -n "${safe}" -a ! -f .Recover/Makefile.in ] ; then
+ if [ -n "${verbose}" ] ; then
+ echo Caching Makefile.in in .Recover...
+ fi
+ mv Makefile.in .Recover
+ fi
+ mv new Makefile.in
+fi
+
# Do this check LAST!
for i in * ; do
if test ! -d $i && (grep sanitize $i > /dev/null) ; then
projects / deliverable / binutils-gdb.git / blobdiff