+########################
+#
+# H H EEEEEE Y Y !!
+# H H E Y Y !!
+# H H E Y Y !!
+# H H E Y !!
+# HHHHHH EEEEE Y !!
+# H H E Y !!
+# H H E Y !!
+# H H E Y
+# H H EEEEEE Y !!
+#
+# YO! READ ME!!!!!!!!!
+# If you're about to add a file or directory which isn't checked out as part
+# of every module in devo (e.g., if "cvs co gas+utils" won't get it, or if
+# "cvs co gcc" won't get it), then don't, Don't, DON'T add it to the regular
+# things-to-keep or things-to-lose sections. Instead, add it to the setting
+# of keep_these_too or lose_these_too before those variables are rescanned
+# to check for the existence of the items listed in them.
+#
+# Otherwise, somebody will check out some package that doesn't include your
+# new file, and will get warnings from Sanitize when everything is really
+# okay. You don't want to get people in the habit of ignoring complaints from
+# Sanitize, do you? No, I didn't think so.
+#
+# If you do add a file to the regular things-to-keep section, don't forget
+# to add the corresponding entry to the devo-support entry (or whatever) in
+# the modules file.
+#
+########################
+
# .Sanitize for devo.
# Each directory to survive its way into a release will need a file
Do-first:
keep_these_too="${keep_these_too} .cvsignore CYGNUS autoconf
+ apache bash
bfd binutils byacc cvs deja-gnu dejagnu diff dosrel dvips emacs emacs19
- examples expect fileutils flex gas gcc gdb gdbm gdbtest glob gprof grep
- groff include install.sh ispell ld libg++ libgcc libgloss libiberty
- libio librx libstdc++ m4 make mmalloc move-if-change newlib opcodes
- pagas patch prms rcs readline sed send-pr shellutils sim tcl textutils
- tk test-build.mk texinfo tgas utils uudecode wdiff xiberty"
-
-cygnus_files="release release-info build-all.mk COPYING.NEWLIB"
+ examples expect fileutils findutils flex
+ gas gawk gcc gdb gdbm gdbtest glob gprof grep grez groff guile gzip
+ include inet install-sh ispell
+ ld less libg++ libgcc libgloss libiberty libio librx libstdc++
+ m4 make mkinstalldirs mmalloc move-if-change newlib ncurses opcodes
+ pagas patch perl prms
+ rcs readline sed send-pr shellutils sim tar textutils time
+ texinfo tgas utils uudecode wdiff xiberty
+ configure.bat makeall.bat setup.com makefile.vms winsup
+ mpw-README mpw-configure mpw-config.in mpw-build.in mpw-install
+ ltconfig ltmain.sh missing ylwrap"
+
+lose_these_too="${lose_these_too} testsuite"
+
+cygnus_files="release release-info build-all.mk test-build.mk COPYING.NEWLIB"
if ( echo $* | grep keep\-cygnus > /dev/null) ; then
keep_these_too="${keep_these_too} ${cygnus_files}"
lose_these_too="${lose_these_too} ${cygnus_files}"
fi
-mpw_files="mpw-README mpw-configure mpw-config.in mpw-build.in ChangeLog.mpw"
+gdbtk_files="tcl tk itcl tix"
+
+if ( echo $* | grep lose\-gdbtk > /dev/null) ; then
+ lose_these_too="${lose_these_too} ${gdbtk_files}"
+ if [ -n "${verbose}" ] ; then
+ echo Deleting ${gdbtk_files}
+ fi
+else
+ keep_these_too="${keep_these_too} ${gdbtk_files}"
+ if [ -n "${verbose}" ] ; then
+ echo Keeping ${gdbtk_files}
+ fi
+fi
+
+# This is for newlib net releases.
+newlib_file="COPYING.NEWLIB"
+
+if (echo $* | grep keep\-newlib > /dev/null) ; then
+ if (echo $* | grep -v keep\-cygnus > /dev/null) ; then
+ keep_these_too="${keep_these_too} ${newlib_file}"
+ lose_these_too="`echo ${lose_these_too} | sed -e s/${newlib_file}//`"
+ fi
+else
+ true; # Let keep-cygnus handle it.
+fi
+
+# IDK releases don't include files which only matter to CDK.
+inet_files="COPYING.LIB config config-ml.in etc symlink-tree"
+
+if (echo $* | grep keep\-inet > /dev/null); then
+ lose_these_too="${lose_these_too} ${inet_files}"
+else
+ keep_these_too="${keep_these_too} ${inet_files}"
+fi
+
+ide_files="itcl libide vmake"
-if ( echo $* | grep keep\-mpw > /dev/null) ; then
- keep_these_too="${keep_these_too} ${mpw_files}"
+if (echo $* | grep keep\-ide > /dev/null); then
+ keep_these_too="${keep_these_too} ${ide_files}"
+ test -n "$verbose" && echo Keeping ${ide_files}
else
- lose_these_too="${lose_these_too} ${mpw_files}"
+ lose_these_too="${lose_these_too} ${ide_files}"
fi
+
# This top-level directory is special. We often check out only subsets
# of this directory, and complaining about directories or files we didn't
# check out just gets obnoxious.
-list="${keep_these_too}"
+list="`(for i in ${keep_these_too}; do echo $i ; done) | sort -u`"
keep_these_too=
for file in $list ; do
fi
done
-list="${lose_these_too}"
+list="`(for i in ${lose_these_too}; do echo $i ; done) | sort -u` "
lose_these_too=
for file in $list ; do
Things-to-keep:
COPYING
-COPYING.LIB
ChangeLog
Makefile.in
README
-config
config.guess
config.sub
configure
configure.in
-etc
-configure.bat
-makeall.bat
Things-to-lose:
Do-last:
+# Don't try to clean directories here, as the 'mv' command will fail.
+# Also, grep fails on NFS mounted directories.
+
if ( echo $* | egrep verbose > /dev/null ) ; then
verbose=true
else
echo Thawing away the \"chill\"...
fi
-# Don't try to clean directories here, as the 'mv' command will fail.
-# Also, grep fails on NFS mounted directories.
if ( echo $* | grep keep\-chill > /dev/null ) ; then
for i in * ; do
if test ! -d $i && (grep sanitize-chill $i > /dev/null) ; then
fi
if [ -n "${verbose}" ] ; then
- echo Removing traces of \"mpw\"...
+ echo Processing \"d30v\"...
fi
-# Don't try to clean directories here, as the 'mv' command will fail.
-# Also, grep fails on NFS mounted directories.
-if ( echo $* | grep keep\-mpw > /dev/null ) ; then
- for i in * ; do
- if test ! -d $i && (grep sanitize-mpw $i > /dev/null) ; then
+d30v_files="ChangeLog config.sub configure.in"
+
+if ( echo $* | grep keep\-d30v > /dev/null ) ; then
+ for i in $d30v_files ; do
+ if test ! -d $i && (grep sanitize-d30v $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
- echo Keeping mpw stuff in $i
+ echo Keeping d30v stuff in $i
fi
fi
done
else
for i in * ; do
- if test ! -d $i && (grep sanitize-mpw $i > /dev/null) ; then
+ if test ! -d $i && (grep sanitize-d30v $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
- echo Removing traces of \"mpw\" from $i...
+ echo Removing traces of \"d30v\" from $i...
fi
cp $i new
- sed '/start\-sanitize\-mpw/,/end-\sanitize\-mpw/d' < $i > new
+ sed '/start\-sanitize\-d30v/,/end-\sanitize\-d30v/d' < $i > new
if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
if [ -n "${verbose}" ] ; then
echo Caching $i in .Recover...
fi
if [ -n "${verbose}" ] ; then
- echo Processing \"arc\"...
+ echo Processing \"v850\"...
fi
-# Don't try to clean directories here, as the 'mv' command will fail.
-# Also, grep fails on NFS mounted directories.
-if ( echo $* | grep keep\-arc > /dev/null ) ; then
+v850_files="ChangeLog config.sub configure.in"
+
+if ( echo $* | grep keep\-v850 > /dev/null ) ; then
+ for i in $v850_files ; do
+ if test ! -d $i && (grep sanitize-v850 $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Keeping v850 stuff in $i
+ fi
+ fi
+ done
+else
+ for i in * ; do
+ if test ! -d $i && (grep sanitize-v850 $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Removing traces of \"v850\" from $i...
+ fi
+ cp $i new
+ sed '/start\-sanitize\-v850/,/end-\sanitize\-v850/d' < $i > new
+ if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+ if [ -n "${verbose}" ] ; then
+ echo Caching $i in .Recover...
+ fi
+ mv $i .Recover
+ fi
+ mv new $i
+ fi
+ done
+fi
+if ( echo $* | grep keep\-v850e > /dev/null ) ; then
+ for i in $v850_files ; do
+ if test ! -d $i && (grep sanitize-v850e $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Keeping v850e stuff in $i
+ fi
+ fi
+ done
+else
+ for i in * ; do
+ if test ! -d $i && (grep sanitize-v850e $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Removing traces of \"v850e\" from $i...
+ fi
+ cp $i new
+ sed '/start\-sanitize\-v850e/,/end-\sanitize\-v850e/d' < $i > new
+ if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+ if [ -n "${verbose}" ] ; then
+ echo Caching $i in .Recover...
+ fi
+ mv $i .Recover
+ fi
+ mv new $i
+ fi
+ done
+fi
+if ( echo $* | grep keep\-v850eq > /dev/null ) ; then
+ for i in $v850_files ; do
+ if test ! -d $i && (grep sanitize-v850eq $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Keeping v850eq stuff in $i
+ fi
+ fi
+ done
+else
+ for i in * ; do
+ if test ! -d $i && (grep sanitize-v850eq $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Removing traces of \"v850eq\" from $i...
+ fi
+ cp $i new
+ sed '/start\-sanitize\-v850eq/,/end-\sanitize\-v850eq/d' < $i > new
+ if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+ if [ -n "${verbose}" ] ; then
+ echo Caching $i in .Recover...
+ fi
+ mv $i .Recover
+ fi
+ mv new $i
+ fi
+ done
+fi
+
+r5900_files="ChangeLog config.sub configure.in"
+
+if ( echo $* | grep keep\-r5900 > /dev/null ) ; then
+ for i in $r5900_files ; do
+ if test ! -d $i && (grep sanitize-r5900 $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Keeping r5900 stuff in $i
+ fi
+ fi
+ done
+else
for i in * ; do
- if test ! -d $i && (grep sanitize-arc $i > /dev/null) ; then
+ if test ! -d $i && (grep sanitize-r5900 $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Removing traces of \"r5900\" from $i...
+ fi
+ cp $i new
+ sed '/start\-sanitize\-r5900/,/end-\sanitize\-r5900/d' < $i > new
+ if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+ if [ -n "${verbose}" ] ; then
+ echo Caching $i in .Recover...
+ fi
+ mv $i .Recover
+ fi
+ mv new $i
+ fi
+ done
+fi
+
+tic80_files="ChangeLog config.sub configure.in"
+
+if ( echo $* | grep keep\-tic80 > /dev/null ) ; then
+ for i in $tic80_files ; do
+ if test ! -d $i && (grep sanitize-tic80 $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
- echo Keeping arc stuff in $i
+ echo Keeping tic80 stuff in $i
fi
fi
done
else
for i in * ; do
- if test ! -d $i && (grep sanitize-arc $i > /dev/null) ; then
+ if test ! -d $i && (grep sanitize-tic80 $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
- echo Removing traces of \"arc\" from $i...
+ echo Removing traces of \"tic80\" from $i...
fi
cp $i new
- sed '/start\-sanitize\-arc/,/end-\sanitize\-arc/d' < $i > new
+ sed '/start\-sanitize\-tic80/,/end-\sanitize\-tic80/d' < $i > new
if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
if [ -n "${verbose}" ] ; then
echo Caching $i in .Recover...
done
fi
-r16_files = "config.sub"
+if ( echo $* | grep keep\-gm > /dev/null ) ; then
+ for i in * ; do
+ if test ! -d $i && (grep sanitize-gm $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Keeping gm stuff in $i
+ fi
+ fi
+ done
+else
+ for i in * ; do
+ if test ! -d $i && (grep sanitize-gm $i > /dev/null) ; then
+ if [ -n "${verbose}" ] ; then
+ echo Removing traces of \"gm\" from $i...
+ fi
+ cp $i new
+ sed '/start\-sanitize\-gm/,/end-\sanitize\-gm/d' < $i > new
+ if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+ if [ -n "${verbose}" ] ; then
+ echo Caching $i in .Recover...
+ fi
+ mv $i .Recover
+ fi
+ mv new $i
+ fi
+ done
+fi
-if ( echo $* | grep keep\-r16 > /dev/null ) ; then
- for i in $r16_files ; do
- if test ! -d $i && (grep sanitize-r16 $i > /dev/null) ; then
+if ( echo $* | grep keep\-ide > /dev/null ) ; then
+ for i in * ; do
+ if test ! -d $i && (grep sanitize-ide $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
- echo Keeping r16 stuff in $i
+ echo Keeping ide stuff in $i
fi
fi
done
else
- for i in $r16_files ; do
- if test ! -d $i && (grep sanitize-r16 $i > /dev/null) ; then
+ for i in * ; do
+ if test ! -d $i && (grep sanitize-ide $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
- echo Removing traces of \"r16\" from $i...
+ echo Removing traces of \"ide\" from $i...
fi
cp $i new
- sed '/start\-sanitize\-r16/,/end-\sanitize\-r16/d' < $i > new
+ sed '/start\-sanitize\-ide/,/end-\sanitize\-ide/d' < $i > new
if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
if [ -n "${verbose}" ] ; then
echo Caching $i in .Recover...
done
fi
+if ( echo $* | grep lose\-gdbtk > /dev/null ) ; then
+ echo Catering to RMS by removing traces of \"gdbtk\"...
+ if [ -n "${verbose}" ] ; then
+ echo Removing traces of \"gdbtk\" from Makefile.in...
+ fi
+ cp Makefile.in new
+ sed -e '/GDBTK_SUPPORT_DIRS=/d' -e 's/ $(GDBTK_SUPPORT_DIRS)//' < Makefile.in > new
+ if [ -n "${safe}" -a ! -f .Recover/Makefile.in ] ; then
+ if [ -n "${verbose}" ] ; then
+ echo Caching Makefile.in in .Recover...
+ fi
+ mv Makefile.in .Recover
+ fi
+ mv new Makefile.in
+fi
+
+# Do this check LAST!
for i in * ; do
if test ! -d $i && (grep sanitize $i > /dev/null) ; then
echo '***' Some mentions of Sanitize are still left in $i! 1>&2
+ exit 1
fi
done
projects / deliverable / binutils-gdb.git / blobdiff