* subsegs.h (seg_info): Provide dummy version for non-BFD_ASSEMBLER,

[deliverable/binutils-gdb.git] / .Sanitize

diff --git a/.Sanitize b/.Sanitize
index c3bc6ac9a24cf36a049ca23e3388fab8f3c4f81a..6429d72f02e6cb4bf289838d58fdd6b3ef044818 100644 (file)
--- a/.Sanitize
+++ b/.Sanitize
@@ -19,9 +19,9 @@ keep_these_too="${keep_these_too} .cvsignore CYGNUS autoconf
        bfd binutils byacc cvs deja-gnu dejagnu diff dosrel dvips emacs emacs19
        examples expect fileutils flex gas gcc gdb gdbm gdbtest glob gprof grep
        groff include install.sh ispell ld libg++ libgcc libgloss libiberty
-       libio librx m4 make mmalloc move-if-change newlib opcodes pagas patch
-       prms rcs readline sed send-pr shellutils sim tcl textutils tk
-       test-build.mk texinfo tgas utils uudecode wdiff xiberty"
+       libio librx libstdc++ m4 make mmalloc move-if-change newlib opcodes
+       pagas patch prms rcs readline sed send-pr shellutils sim tcl textutils
+       tk test-build.mk texinfo tgas utils uudecode wdiff xiberty"
 
 cygnus_files="release release-info build-all.mk COPYING.NEWLIB"
 
@@ -31,12 +31,18 @@ else
        lose_these_too="${lose_these_too} ${cygnus_files}"
 fi
 
-mpw_files="mpw-README mpw-configure mpw-config.in mpw-build.in ChangeLog.mpw"
+gdbtk_files="tcl tk"
 
-if ( echo $* | grep keep\-mpw > /dev/null) ; then
-       keep_these_too="${keep_these_too} ${mpw_files}"
+if ( echo $* | grep lose\-gdbtk > /dev/null) ; then
+       lose_these_too="${lose_these_too} ${gdbtk_files}"
+       if [ -n "${verbose}" ] ; then
+               echo Deleting ${gdbtk_files}
+       fi
 else
-       lose_these_too="${lose_these_too} ${mpw_files}"
+       keep_these_too="${keep_these_too} ${gdbtk_files}"
+       if [ -n "${verbose}" ] ; then
+               echo Keeping ${gdbtk_files}
+       fi
 fi
 
 # This top-level directory is special.  We often check out only subsets
@@ -80,6 +86,13 @@ config.sub
 configure
 configure.in
 etc
+# These will only show up if they checked out gas-extra-stuff.
+configure.bat
+makeall.bat
+mpw-README
+mpw-configure
+mpw-config.in
+mpw-build.in
 
 Things-to-lose:
 
@@ -89,6 +102,9 @@ Things-to-lose:
 
 Do-last:
 
+# Don't try to clean directories here, as the 'mv' command will fail.
+# Also, grep fails on NFS mounted directories.
+
 if ( echo $* | egrep verbose > /dev/null ) ; then
        verbose=true
 else
@@ -110,8 +126,6 @@ if [ -n "${verbose}" ] ; then
        echo Thawing away the \"chill\"...
 fi
 
-# Don't try to clean directories here, as the 'mv' command will fail.
-# Also, grep fails on NFS mounted directories.
 if ( echo $* | grep keep\-chill > /dev/null ) ; then
        for i in * ; do
                if test ! -d $i && (grep sanitize-chill $i > /dev/null) ; then
@@ -140,27 +154,27 @@ else
 fi
 
 if [ -n "${verbose}" ] ; then
-       echo Removing traces of \"mpw\"...
+       echo Processing \"arc\"...
 fi
 
-# Don't try to clean directories here, as the 'mv' command will fail.
-# Also, grep fails on NFS mounted directories.
-if ( echo $* | grep keep\-mpw > /dev/null ) ; then
-       for i in * ; do
-               if test ! -d $i && (grep sanitize-mpw $i > /dev/null) ; then
+arc_files="config.sub configure.in"
+
+if ( echo $* | grep keep\-arc > /dev/null ) ; then
+       for i in $arc_files ; do
+               if test ! -d $i && (grep sanitize-arc $i > /dev/null) ; then
                        if [ -n "${verbose}" ] ; then
-                               echo Keeping mpw stuff in $i
+                               echo Keeping arc stuff in $i
                        fi
                fi
        done
 else
        for i in * ; do
-               if test ! -d $i && (grep sanitize-mpw $i > /dev/null) ; then
+               if test ! -d $i && (grep sanitize-arc $i > /dev/null) ; then
                        if [ -n "${verbose}" ] ; then
-                               echo Removing traces of \"mpw\" from $i...
+                               echo Removing traces of \"arc\" from $i...
                        fi
                        cp $i new
-                       sed '/start\-sanitize\-mpw/,/end-\sanitize\-mpw/d' < $i > new
+                       sed '/start\-sanitize\-arc/,/end-\sanitize\-arc/d' < $i > new
                        if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
                                if [ -n "${verbose}" ] ; then
                                        echo Caching $i in .Recover...
@@ -172,28 +186,53 @@ else
        done
 fi
 
-if [ -n "${verbose}" ] ; then
-       echo Processing \"arc\"...
-fi
+psion_files="config.sub configure.in"
 
-# Don't try to clean directories here, as the 'mv' command will fail.
-# Also, grep fails on NFS mounted directories.
-if ( echo $* | grep keep\-arc > /dev/null ) ; then
-       for i in * ; do
-               if test ! -d $i && (grep sanitize-arc $i > /dev/null) ; then
+if ( echo $* | grep keep\-psion > /dev/null ) ; then
+       for i in $psion_files; do
+               if test ! -d $i && (grep sanitize-psion $i > /dev/null) ; then
                        if [ -n "${verbose}" ] ; then
-                               echo Keeping arc stuff in $i
+                               echo Keeping psion stuff in $i
                        fi
                fi
        done
 else
        for i in * ; do
-               if test ! -d $i && (grep sanitize-arc $i > /dev/null) ; then
+               if test ! -d $i && (grep sanitize-psion $i > /dev/null) ; then
                        if [ -n "${verbose}" ] ; then
-                               echo Removing traces of \"arc\" from $i...
+                               echo Removing traces of \"psion\" from $i...
                        fi
                        cp $i new
-                       sed '/start\-sanitize\-arc/,/end-\sanitize\-arc/d' < $i > new
+                       sed '/start\-sanitize\-psion/,/end-\sanitize\-psion/d' < $i > new
+                       if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+                               if [ -n "${verbose}" ] ; then
+                                       echo Caching $i in .Recover...
+                               fi
+                               mv $i .Recover
+                       fi
+                       mv new $i
+               fi
+       done
+fi
+
+rce_files="config.sub"
+
+if ( echo $* | grep keep\-rce > /dev/null ) ; then
+       for i in $rce_files ; do
+               if test ! -d $i && (grep sanitize-rce $i > /dev/null) ; then
+                       if [ -n "${verbose}" ] ; then
+                               echo Keeping rce stuff in $i
+                       fi
+               fi
+       done
+else
+       for i in $rce_files ; do
+               if test ! -d $i && (grep sanitize-rce $i > /dev/null) ; then
+                       if [ -n "${verbose}" ] ; then
+                               echo Removing traces of \"rce\" from $i...
+                       fi
+                       cp $i new
+                       sed '/start\-sanitize\-rce/,/end-\sanitize\-rce/d' < $i > new
                        if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
                                if [ -n "${verbose}" ] ; then
                                        echo Caching $i in .Recover...