+Mon Jun 16 11:11:10 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * configure.in: Build itl, db, sn, etc., when building for native
+ cygwin32.
+
+ * Makefile.in (LD): New variable.
+ (EXTRA_HOST_FLAGS): Pass down LD.
+ ($(DO_X)): Likewise.
+
+Mon Jun 16 11:10:35 1997 Philip Blundell <Philip.Blundell@pobox.com>
+
+ * Makefile.in (INSTALL): Use $(SHELL) when executing install-sh.
+
+Fri Jun 13 10:22:56 1997 Bob Manson <manson@charmed.cygnus.com>
+
+ * configure.in (targargs): Strip out any supplied --build argument
+ before adding our own. Always add --build.
+
+Thu Jun 12 21:12:28 1997 Bob Manson <manson@charmed.cygnus.com>
+
+ * configure.in (targargs): Pass --build if we're doing
+ a cross-compile.
+
+Fri Jun 6 21:38:40 1997 Rob Savoye <rob@chinadoll.cygnus.com>
+
+ * configure: Use '|' instead of ":" as the seperator in
+ sed. Otherwise sed chokes on NT path names with drive
+ designators. Also look for "?:*" as the leading characters in an
+ absolute pathname.
+
+Mon Jun 2 13:05:20 1997 Gavin Koch <gavin@cygnus.com>
+
+ * config.sub: Support for r3900.
+
+Wed May 21 17:33:31 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * configure.in: Use install-sh, not install.sh.
+
+Wed May 14 16:06:51 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * Makefile.in (taz): Improve check for BISON so it doesn't try to
+ apply it twice.
+
+Fri May 9 17:22:05 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * Makefile.in (INSTALL_MODULES): Put install-opcodes before
+ install-binutils.
+
+Thu May 8 17:29:50 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * Makefile.in: Add automake targets.
+ * configure.in (host_tools): Add automake.
+
+start-sanitize-ide
+Thu May 8 17:09:12 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * Makefile.in (all-libide): Depend upon all-ilu.
+
+end-sanitize-ide
+Tue May 6 15:49:52 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * configure: Default CXX to c++, not gcc.
+ * Makefile.in (CXX): Set to c++, not gcc.
+ (CXX_FOR_TARGET): When cross, transform c++, not gcc.
+
+start-sanitize-ide
+Tue May 6 11:23:57 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * Makefile.in: Add ILU targets.
+ * configure.in (host_tools): Add ILU.
+
+end-sanitize-ide
+Thu May 1 10:11:43 1997 Geoffrey Noer <noer@cygnus.com>
+
+ * install-sh: try appending a .exe if source file doesn't
+ exist
+
+Wed Apr 30 12:05:36 1997 Jason Merrill <jason@yorick.cygnus.com>
+
+ * configure.in: Turn on multilib by default.
+ (cross_only): Remove target-libiberty.
+
+ * Makefile.in (all-gcc): Don't depend on libiberty.
+
+start-sanitize-ide
+Tue Apr 29 11:26:36 1997 Tom Tromey <tromey@cygnus.com>
+
+ * configure.in (host_tools): Added vmake.
+
+end-sanitize-ide
+Mon Apr 28 18:39:45 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
+
+ * config.guess: improve algorithm for recognizing Gnu Hurd x86.
+
+Thu Apr 24 19:30:07 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * Makefile.in (DEVO_SUPPORT): Add mpw-install.
+ (DISTBISONFILES): Add ld/Makefile.in
+
+Tue Apr 22 17:17:28 1997 Geoffrey Noer <noer@pizza.cygnus.com>
+
+ * configure.in: if target is cygwin32 but host isn't cygwin32,
+ don't configure gdb tcl tk expect, not just gdb.
+
+Mon Apr 21 13:33:39 1997 Tom Tromey <tromey@cygnus.com>
+
+ * configure.in: Added gnuserv everywhere sn appears.
+
+ * Makefile.in (ALL_MODULES): Added all-gnuserv.
+ (CROSS_CHECK_MODULES): Added check-gnuserv.
+ (INSTALL_MODULES): Added install-gnuserv.
+ (CLEAN_MODULES): Added clean-gnuserv.
+ (all-gnuserv): New target.
+
+start-sanitize-ide
+Fri Apr 18 18:10:44 1997 Tom Tromey <tromey@cygnus.com>
+
+ * configure.in (host_libs): Added libide.
+ Skip libide, vmake if no X. Also skip these everywhere that sn is
+ skipped.
+
+ * Makefile.in (ALL_MODULES): Added all-vmake, all-libide.
+ (CROSS_CHECK_MODULES): Added check-vmake, check-libide.
+ (INSTALL_MODULES): Added install-vmake, install-libide.
+ (CLEAN_MODULES): Added clean-vmake, clean-libide.
+ (all-vmake, all-libide): New targets.
+
+end-sanitize-ide
+Thu Apr 17 13:57:06 1997 Per Fogelstrom <pefo@openbsd.org>
+
+ * config.guess: Fixes for MIPS OpenBSD systems.
+
+Tue Apr 15 12:21:07 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * Makefile.in (INSTALL_XFORM): Remove.
+ (BASE_FLAGS_TO_PASS): Remove INSTALL_XFORM.
+
+ * mkinstalldirs: New file, copied from automake.
+ * Makefile.in (installdirs): Rename from install-dirs. Use
+ mkinstalldirs. Change all users.
+ (DEVO_SUPPORT): Add mkinstalldirs.
+
+Mon Apr 14 11:21:38 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * install-sh: Rename from install.sh.
+ * Makefile.in (INSTALL): Change install.sh to install-sh.
+ (DEVO_SUPPORT): Likewise.
+
+ * configure: Use ${config_shell} with ${moveifchange}. From Thomas
+ Graichen <graichen@rzpd.de>.
+
+Fri Apr 11 16:37:10 1997 Niklas Hallqvist <niklas@appli.se>
+
+ * config.guess: Recognize OpenBSD systems correctly.
+
+Fri Apr 11 17:07:04 1997 Jason Molenda (crash@godzilla.cygnus.co.jp)
+
+ * README, Makefile.in (ETC_SUPPORT): Remove references to
+ cfg-paper*, configure.{texi,man,info*}._
+
+Sun Apr 6 18:47:57 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
+
+ * Makefile.in (all.normal): Ensure that gcc is built after all
+ the x11 - ie gdb - targets.
+
+Tue Apr 1 16:28:50 1997 Klaus Kaempf <kkaempf@progis.de>
+
+ * makefile.vms: Don't run conf-a-gas.
+
+Mon Mar 31 16:26:55 1997 Joel Sherrill <joel@oarcorp.com>
+
+ * configure.in (hppa1.1-*-rtems*): New target, like hppa-*-*elf*.
+
+start-sanitize-tic80
+Sun Mar 30 12:38:27 1997 Fred Fish <fnf@cygnus.com>
+
+ * configure.in: Remove noconfigdirs case since gdb also
+ configures and builds for tic80-coff.
+
+end-sanitize-tic80
+Fri Mar 28 18:28:52 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * configure: Set cache_file to config.cache.
+ * Makefile.in (local-distclean): Remove config.cache.
+
+Wed Mar 26 18:49:39 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * COPYING: Update FSF address.
+
+start-sanitize-tic80
+Wed Mar 26 10:38:25 1997 Michael Meissner <meissner@cygnus.com>
+
+ * configure.in (tic80-*-*): Remove G++ libraries and libgloss from
+ noconfigdirs.
+
+end-sanitize-tic80
+Mon Mar 24 15:02:39 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * Makefile.in (install-dirs): Don't crash if prefix, and hence
+ MAKEDIRS, is empty.
+
+Mon Mar 24 12:40:55 1997 Doug Evans <dje@canuck.cygnus.com>
+
+ * config.sub: Tweak mn10300 entry.
+
+Fri Mar 21 15:35:27 1997 Michael Meissner <meissner@cygnus.com>
+
+ * configure.in (host_tools): Put sim before gdb, so gdb's
+ configure.tgt can determine if the simulator was configured.
+
+Sun Mar 16 16:07:08 1997 Fred Fish <fnf@cygnus.com>
+
+ * config.sub: Move BeOS $os case to be with other Cygnus
+ local cases.
+
+Sun Mar 16 01:34:55 1997 Martin Hunt <hunt@cygnus.com>
+
+ * config.sub: Remove misplaced comment that broke Linux.
+
+Sat Mar 15 22:50:15 1997 Fred Fish <fnf@cygnus.com>
+
+ * config.sub: Add BeOS support.
+
+Mon Mar 10 13:30:11 1997 Tom Tromey <tromey@cygnus.com>
+
+ * Makefile.in (CHECK_X11_MODULES): Don't run check-tk.
+
+Wed Mar 5 12:09:29 1997 Martin <hunt@cygnus.com>
+
+ * configure.in (noconfigdirs): Remove tcl and tk from
+ noconfigdirs for cygwin32 builds.
+
+start-sanitize-tic80
+Fri Feb 28 18:20:15 1997 Fred Fish <fnf@cygnus.com>
+
+ * configure.in (tic80-*-*): Remove ld from noconfigdirs.
+
+end-sanitize-tic80
+Thu Feb 27 14:57:26 1997 Ken Raeburn <raeburn@cygnus.com>
+
+ * Makefile.in (GAS_SUPPORT_DIRS, BINUTILS_SUPPORT_DIRS): Remove
+ make-all.com, use makefile.vms instead.
+
+Tue Feb 25 18:46:14 1997 Stan Shebs <shebs@andros.cygnus.com>
+
+ * config.sub: Accept -lnews*.
+
+start-sanitize-d30v
+Tue Feb 25 13:19:14 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
+
+ * configure.in (noconfigdirs): Disable target-newlib,
+ target-examples and target-libiberty for d30v.
+
+end-sanitize-d30v
+start-sanitize-tic80
+Tue Feb 25 11:41:51 1997 Tom Tromey <tromey@cygnus.com>
+
+ * configure.in (host_libs): Build itcl after tcl, tk.
+
+ * configure.in (host_libs): Added db, itcl.
+ (host_tools): Added sn.
+ (noconfigdirs): Added itcl, db, sn in appropriate places.
+ (native_only): Added sn.
+
+ * Makefile.in (all-db, all-sn): New targets.
+ (ALL_MODULES): Added all-sn.
+ (CROSS_CHECK_MODULES): Added check-sn.
+ (INSTALL_MODULES): Added install-sn.
+ (CLEAN_MODULES): Added clean-sn.
+
+end-sanitize-tic80
+start-sanitize-d30v
+Fri Feb 21 17:56:25 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
+
+ * configure.in (noconfigdirs): Enable ld for d30v.
+
+end-sanitize-d30v
+start-sanitize-tic80
+Fri Feb 21 20:58:51 1997 Michael Meissner <meissner@cygnus.com>
+
+ * configure.in (tic80-*-*): Build compiler.
+
+end-sanitize-tic80
+start-sanitize-d30v
+Sun Feb 16 15:41:09 1997 Andrew Cagney <cagney@critters.cygnus.com>
+
+ * configure.in (d30v-*): Remove sim directory from list of
+ unsupported d30v directories
+
+end-sanitize-d30v
+start-sanitize-d30v
+Tue Feb 18 17:32:42 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
+
+ * config.sub, configure.in: Add d30v target cpu.
+
+end-sanitize-d30v
+Thu Feb 13 22:04:44 1997 Klaus Kaempf <kkaempf@progis.de>
+
+ * makefile.vms: New file.
+ * make-all.com: Remove.
+
+Wed Feb 12 12:54:18 1997 Jim Wilson <wilson@cygnus.com>
+
+ * Makefile.in (EXTRA_GCC_FLAGS): Add LIBGCC2_DEBUG_CFLAGS.
+
+start-sanitize-r5900
+Fri Feb 7 16:39:29 1997 Gavin Koch <gavin@cygnus.com>
+
+ * config.sub, configure.in: add r5900
+
+end-sanitize-r5900
+Sat Feb 8 20:36:49 1997 Michael Meissner <meissner@cygnus.com>
+
+ * Makefile.in (all-itcl): The rule is all-itcl, not all-tcl.
+
+Tue Feb 4 11:39:29 1997 Tom Tromey <tromey@cygnus.com>
+
+ * Makefile.in (ALL_MODULES): Added all-db.
+ (CROSS_CHECK_MODULES): Addec check-db.
+ (INSTALL_MODULES): Added install-db.
+ (CLEAN_MODULES): Added clean-db.
+
+Mon Feb 3 13:29:36 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * config.guess: Merge with latest FSF sources.
+
+Tue Jan 28 09:20:37 1997 Tom Tromey <tromey@cygnus.com>
+
+ * Makefile.in (ALL_MODULES): Added all-itcl.
+ (CROSS_CHECK_MODULES): Added check-itcl.
+ (INSTALL_MODULES): Added install-itcl.
+ (CLEAN_MODULES): Added clean-itcl.
+
+Thu Jan 23 01:44:27 1997 Geoffrey Noer <noer@cygnus.com>
+
+ * configure.in: build gdb for mn10200
+
+Fri Jan 17 15:32:15 1997 Doug Evans <dje@canuck.cygnus.com>
+
+ * Makefile.in (all-target-winsup): Depend on all-target-libio.
+
+start-sanitize-tic80
+Mon Jan 13 22:46:54 1997 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * configure.in (tic80-*-*): Turn off most targets right now.
+
+end-sanitize-tic80
+Fri Jan 3 16:04:03 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * Makefile.in (MAKEINFO): Check for the existence of the Makefile,
+ rather than the makeinfo program.
+ (do-info): Depend upon all-texinfo.
+
+Tue Dec 31 16:00:31 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * configure.in: Remove uses of config/mh-linux.
+
+ * config.sub, config.guess: Merge with latest FSF sources.
+
+start-sanitize-tic80
+Fri Dec 27 23:04:33 1996 Fred Fish <fnf@cygnus.com>
+
+ * config.sub (case $basic_machine): Add tic80 entries.
+
+end-sanitize-tic80
+Fri Dec 27 12:07:59 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * config.sub, config.guess: Merge with latest FSF sources.
+
+Wed Dec 18 22:46:39 1996 Stan Shebs <shebs@andros.cygnus.com>
+
+ * mpw-build.in: Build ld before gcc, use NewFolderRecursive.
+ * mpw-config.in: Test for NewFolderRecursive.
+ * mpw-install: Use symbolic name for startup filename.
+ * mpw-README: Add various additional details.
+
+Wed Dec 18 13:11:46 1996 Jim Wilson <wilson@cygnus.com>
+
+ * configure.in (mips*-sgi-irix6*): Remove binutils from noconfigdirs.
+
+Wed Dec 18 10:29:31 1996 Jeffrey A Law (law@cygnus.com)
+
+ * configure.in: Do build gcc and the target libraries for
+ the mn10200.
+
+Wed Dec 4 16:53:05 1996 Geoffrey Noer <noer@cygnus.com>
+
+ * configure.in: don't avoid building gdb for mn10300 any more
+ * Makefile.in: double-quote GCC_FOR_TARGET line in EXTRA_GCC_FLAGS
+ instead of single-quoting it.
+
+Tue Dec 3 23:26:50 1996 Jason Merrill <jason@yorick.cygnus.com>
+
+ * configure.in: Don't use --with-stabs on IRIX 6.
+
+Tue Dec 3 09:05:25 1996 Doug Evans <dje@canuck.cygnus.com>
+
+ * configure.in (m32r): Build gdb, libg++ now.
+
+Sun Dec 1 00:18:59 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * configure.in (mips*-sgi-irix6*): Remove gdb and related
+ directories from noconfigdirs.
+
+Tue Nov 26 11:45:33 1996 Kim Knuttila <krk@cygnus.com>
+
+ * config.sub (basic_machine): added mips16 configuration
+
+Sat Nov 23 19:26:22 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * config.sub: Handle d10v-unknown.
+
start-sanitize-v850
+Sat Nov 23 14:23:01 1996 Gavin Koch <gavin@cygnus.com>
+
+ * gcc/depragmaize.c: Handle MSDOS's (non-unix) text files.
+
Sat Nov 23 10:23:01 1996 Gavin Koch <gavin@cygnus.com>
-
+
* config.sub: Handle v850-unknown.
end-sanitize-v850
* config.sub: Handle mn10200 and mn10300.
-start-sanitize-d10v
Tue Nov 19 16:35:14 1996 Michael Meissner <meissner@tiktok.cygnus.com>
* configure.in (d10v-*): Do not build librx.
-end-sanitize-d10v
Mon Nov 18 13:28:41 1996 Jeffrey A Law (law@cygnus.com)
* configure.in (mn10300): Build everything except gdb & libgloss.
CC_FOR_TARGET was specified on the command line.
(MAKEOVERRIDES): Don't define.
-start-sanitize-m32r
Thu Oct 17 10:27:56 1996 Doug Evans <dje@canuck.cygnus.com>
* configure.in (m32r): Fix spelling of libg++ libs.
-end-sanitize-m32r
Thu Oct 10 10:37:17 1996 Stan Shebs <shebs@andros.cygnus.com>
* config.sub (-apple*): Remove, now redundant.
* configure.in: You can now configure GDB for the v850.
end-sanitize-v850
-start-sanitize-d10v
Tue Sep 24 19:05:12 1996 Stan Shebs <shebs@andros.cygnus.com>
* configure.in (noconfigdirs): Don't configure any C++ dirs
if targeting D10V.
-end-sanitize-d10v
Tue Sep 17 12:15:31 1996 Ian Lance Taylor <ian@cygnus.com>
* config.sub: Recognize mips64vr5000.
* configure.in: Use a single line for host_tools and native_only.
-start-sanitize-m32r
Mon Sep 9 12:21:30 1996 Doug Evans <dje@canuck.cygnus.com>
* config.sub, configure.in: Add entries for m32r.
-end-sanitize-m32r
Thu Sep 5 13:52:47 1996 Tom Tromey <tromey@creche.cygnus.com>
* Makefile.in (inet-install): Don't run install-gzip.
* config.guess (i[345]86): Ditto.
-start-sanitize-d10v
Mon Aug 26 18:34:42 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* configure.in (noconfigdirs): Removed gdb for D10V.
-end-sanitize-d10v
start-sanitize-v850
Thu Aug 22 17:13:52 1996 Jeffrey A Law (law@cygnus.com)
* mpw-config.in: Generate Mac include for elf/dwarf2.h.
-start-sanitize-d10v
Tue Jul 23 10:47:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* configure.in (d10v-*-*): Remove ld from $noconfigdirs.
-end-sanitize-d10v
Mon Jul 22 13:28:51 1996 Brendan Kehoe <brendan@lisa.cygnus.com>
* configure.in (native_only): Add prms.
* Makefile.in (GAS_SUPPORT_DIRS): Add make-all.com and setup.com.
(BINUTILS_SUPPORT_DIRS): Likewise.
-start-sanitize-d10v
Thu Jul 18 12:55:40 1996 Michael Meissner <meissner@tiktok.cygnus.com>
* configure.in (d10v-*-*): Don't configure ld or gdb until the
* configure.in (d10v-*-*): New target.
-end-sanitize-d10v
Mon Jul 15 11:53:00 1996 Jeffrey A Law (law@cygnus.com)
* config.guess (HP 9000/811): Recognize this as a PA1.1
* configure.in (mips-sgi-irix6*): Use mh-irix6 instead of mh-irix5.
-start-sanitize-d10v
Mon Jul 1 13:31:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
* config.sub (basic_machine): Recognize d10v as a valid processor.
-end-sanitize-d10v
Fri Jun 28 12:14:35 1996 Stan Shebs <shebs@andros.cygnus.com>
\f
Local Variables:
-mode: indented-text
+mode: change-log
left-margin: 8
-fill-column: 74
+fill-column: 76
version-control: never
End: