usb: phy: generic: Don't use regulator framework for RESET line

[deliverable/linux.git] / Documentation / devicetree / bindings / usb / usb-nop-xceiv.txt

diff --git a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt
index d7e272671c7e42819c35fc0583d3744aaecd74d9..1bd37faba05b9c3aab70a0ec305107f308ba7665 100644 (file)
--- a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt
+++ b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt
@@ -15,7 +15,7 @@ Optional properties:
 
 - vcc-supply: phandle to the regulator that provides RESET to the PHY.
 
-- reset-supply: phandle to the regulator that provides power to the PHY.
+- reset-gpios: Should specify the GPIO for reset.
 
 Example:
 
@@ -25,10 +25,9 @@ Example:
                clocks = <&osc 0>;
                clock-names = "main_clk";
                vcc-supply = <&hsusb1_vcc_regulator>;
-               reset-supply = <&hsusb1_reset_regulator>;
+               reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
        };
 
 hsusb1_phy is a NOP USB PHY device that gets its clock from an oscillator
 and expects that clock to be configured to 19.2MHz by the NOP PHY driver.
-hsusb1_vcc_regulator provides power to the PHY and hsusb1_reset_regulator
-controls RESET.
+hsusb1_vcc_regulator provides power to the PHY and GPIO 7 controls RESET.