then echo $$r/m4/m4 ; \
else echo ${DEFAULT_M4} ; fi`
+# For an installed makeinfo, we require it to be from texinfo 4 or
+# higher, else we use the "missing" dummy.
MAKEINFO = `if [ -f $$r/texinfo/makeinfo/Makefile ] ; \
then echo $$r/texinfo/makeinfo/makeinfo ; \
- else echo makeinfo ; fi`
+ else if (makeinfo --version \
+ | egrep 'texinfo[^0-9]*([1-3][0-9]|[4-9])') >/dev/null 2>&1; \
+ then echo makeinfo; else echo $$s/missing makeinfo; fi; fi`
# This just becomes part of the MAKEINFO definition passed down to
# sub-makes. It lets flags be given on the command line while still
# Changed by configure to $(target_alias) if cross.
TARGET_SUBDIR = .
-# This is set by the configure script to the arguments passed to configure.
-CONFIG_ARGUMENTS =
+BUILD_CONFIGDIRS = libiberty
+BUILD_SUBDIR = .
+
+# This is set by the configure script to the arguments to use when configuring
+# directories built for the target.
+TARGET_CONFIGARGS =
+
+# This is set by the configure script to the arguments to use when configuring
+# directories built for the build system.
+BUILD_CONFIGARGS =
# This is set by configure to REALLY_SET_LIB_PATH if --enable-shared
# was used.
CC_FOR_TARGET =
CHILL_FOR_TARGET =
CXX_FOR_TARGET =
+CXX_FOR_TARGET_FOR_RECURSIVE_MAKE =
# If GCC_FOR_TARGET is not overriden on the command line, then this
# variable is passed down to the gcc Makefile, where it is used to
AS_FOR_TARGET = ` \
if [ -f $$r/gas/as-new ] ; then \
echo $$r/gas/as-new ; \
+ elif [ -f $$r/gcc/xgcc ]; then \
+ $(CC_FOR_TARGET) -print-prog-name=as ; \
else \
- if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+ if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
echo $(AS); \
else \
t='$(program_transform_name)'; echo as | sed -e 's/x/x/' $$t ; \
LD_FOR_TARGET = ` \
if [ -f $$r/ld/ld-new ] ; then \
echo $$r/ld/ld-new ; \
+ elif [ -f $$r/gcc/xgcc ]; then \
+ $(CC_FOR_TARGET) -print-prog-name=ld ; \
else \
- if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+ if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
echo $(LD); \
else \
t='$(program_transform_name)'; echo ld | sed -e 's/x/x/' $$t ; \
if [ -f $$r/binutils/dlltool ] ; then \
echo $$r/binutils/dlltool ; \
else \
- if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+ if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
echo $(DLLTOOL); \
else \
t='$(program_transform_name)'; echo dlltool | sed -e 's/x/x/' $$t ; \
if [ -f $$r/binutils/windres ] ; then \
echo $$r/binutils/windres ; \
else \
- if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+ if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
echo $(WINDRES); \
else \
t='$(program_transform_name)'; echo windres | sed -e 's/x/x/' $$t ; \
if [ -f $$r/binutils/ar ] ; then \
echo $$r/binutils/ar ; \
else \
- if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+ if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
echo $(AR); \
else \
t='$(program_transform_name)'; echo ar | sed -e 's/x/x/' $$t ; \
if [ -f $$r/binutils/ranlib ] ; then \
echo $$r/binutils/ranlib ; \
else \
- if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
- echo $(RANLIB); \
+ if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
+ if [ x'$(RANLIB)' != x ]; then \
+ echo $(RANLIB); \
+ else \
+ echo ranlib; \
+ fi; \
else \
t='$(program_transform_name)'; echo ranlib | sed -e 's/x/x/' $$t ; \
fi; \
NM_FOR_TARGET = ` \
if [ -f $$r/binutils/nm-new ] ; then \
echo $$r/binutils/nm-new ; \
+ elif [ -f $$r/gcc/xgcc ]; then \
+ $(CC_FOR_TARGET) -print-prog-name=nm ; \
else \
- if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+ if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
echo $(NM); \
else \
t='$(program_transform_name)'; echo nm | sed -e 's/x/x/' $$t ; \
"target_alias=$(target_alias)" \
"libsubdir=$(libsubdir)"
+# For any flags above that may contain shell code that varies from one
+# target library to another. When doing recursive invocations of the
+# top-level Makefile, we don't want the outer make to evaluate them,
+# so we pass these variables down unchanged. They must not contain
+# single nor double quotes.
+RECURSE_FLAGS = \
+ CXX_FOR_TARGET='$(CXX_FOR_TARGET_FOR_RECURSIVE_MAKE)'
+
# Flags to pass down to most sub-makes, in which we're building with
# the host environment.
# If any variables are added here, they must be added to do-*, below.
GCC_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_GCC_FLAGS)
+# This is a list of the targets for all of the modules which are compiled
+# using the build machine's native compiler. Configure edits the second
+# macro for build!=host builds.
+ALL_BUILD_MODULES_LIST = \
+ all-build-libiberty
+ALL_BUILD_MODULES =
+
+# This is a list of the configure targets for all of the modules which
+# are compiled using the native tools.
+CONFIGURE_BUILD_MODULES = \
+ configure-build-libiberty
+
# This is a list of the targets for all of the modules which are compiled
# using $(FLAGS_TO_PASS).
ALL_MODULES = \
# The target built for a native build.
.PHONY: all.normal
all.normal: \
+ $(ALL_BUILD_MODULES) \
$(ALL_MODULES) \
$(ALL_X11_MODULES) \
$(ALL_TARGET_MODULES) \
case $$i in \
gcc) \
for flag in $(EXTRA_GCC_FLAGS); do \
- eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'|"`; \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
done; \
;; \
*) \
for flag in $(EXTRA_HOST_FLAGS); do \
- eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'|"`; \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
done; \
;; \
esac ; \
- export AR AS CC CXX LD NM RANLIB DLLTOOL WINDRES; \
if (cd ./$$i; \
$(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
"CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
for i in $(TARGET_CONFIGDIRS) -dummy-; do \
if [ -f $(TARGET_SUBDIR)/$$i/Makefile ]; then \
for flag in $(EXTRA_TARGET_FLAGS); do \
- eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'|"`; \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
done; \
- export AR AS CC CXX LD NM RANLIB DLLTOOL WINDRES; \
if (cd $(TARGET_SUBDIR)/$$i; \
$(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
"CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
mv gcc/tmp-include gcc/include 2>/dev/null; \
else true; fi
+# This rule is used to build the modules which are built with the
+# build machine's native compiler.
+.PHONY: $(ALL_BUILD_MODULES)
+$(ALL_BUILD_MODULES):
+ dir=`echo $@ | sed -e 's/all-build-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd`; export s; \
+ (cd $(BUILD_SUBDIR)/$${dir} && $(MAKE) all); \
+ else \
+ true; \
+ fi
+
+# This rule is used to configure the modules which are built with the
+# native tools.
+.PHONY: $(CONFIGURE_BUILD_MODULES)
+$(CONFIGURE_BUILD_MODULES):
+ @dir=`echo $@ | sed -e 's/configure-build-//'`; \
+ if [ ! -d $(BUILD_SUBDIR) ]; then \
+ true; \
+ elif [ -f $(BUILD_SUBDIR)/$${dir}/Makefile ] ; then \
+ true; \
+ elif echo " $(BUILD_CONFIGDIRS) " | grep " $${dir} " >/dev/null 2>&1; then \
+ if [ -d $(srcdir)/$${dir} ]; then \
+ [ -d $(BUILD_SUBDIR)/$${dir} ] || mkdir $(BUILD_SUBDIR)/$${dir};\
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd`; export s; \
+ AR="$(AR_FOR_BUILD)"; export AR; \
+ AS="$(AS_FOR_BUILD)"; export AS; \
+ CC="$(CC_FOR_BUILD)"; export CC; \
+ CFLAGS="$(CFLAGS_FOR_BUILD)"; export CFLAGS; \
+ CXX="$(CXX_FOR_BUILD)"; export CXX; \
+ CXXFLAGS="$(CXXFLAGS_FOR_BUILD)"; export CXXFLAGS; \
+ GCJ="$(GCJ_FOR_BUILD)"; export GCJ; \
+ DLLTOOL="$(DLLTOOL_FOR_BUILD)"; export DLLTOOL; \
+ LD="$(LD_FOR_BUILD)"; export LD; \
+ LDFLAGS="$(LDFLAGS_FOR_BUILD)"; export LDFLAGS; \
+ NM="$(NM_FOR_BUILD)"; export NM; \
+ RANLIB="$(RANLIB_FOR_BUILD)"; export RANLIB; \
+ WINDRES="$(WINDRES_FOR_BUILD)"; export WINDRES; \
+ echo Configuring in $(BUILD_SUBDIR)/$${dir}; \
+ cd "$(BUILD_SUBDIR)/$${dir}" || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) \
+ topdir=$(srcdir) ;; \
+ *) \
+ case "$(BUILD_SUBDIR)" in \
+ .) topdir="../$(srcdir)" ;; \
+ *) topdir="../../$(srcdir)" ;; \
+ esac ;; \
+ esac; \
+ if [ "$(srcdir)" = "." ] ; then \
+ if [ "$(BUILD_SUBDIR)" != "." ] ; then \
+ if $(SHELL) $$s/symlink-tree $${topdir}/$${dir} "no-such-file" ; then \
+ if [ -f Makefile ]; then \
+ if $(MAKE) distclean; then \
+ true; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ srcdiroption="--srcdir=."; \
+ libsrcdir="."; \
+ else \
+ srcdiroption="--srcdir=$${topdir}/$${dir}"; \
+ libsrcdir="$$s/$${dir}"; \
+ fi; \
+ if [ -f $${libsrcdir}/configure ] ; then \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
+ $(BUILD_CONFIGARGS) $${srcdiroption} \
+ --with-build-subdir="$(BUILD_SUBDIR)"; \
+ else \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $$s/configure \
+ $(BUILD_CONFIGARGS) $${srcdiroption} \
+ --with-build-subdir="$(BUILD_SUBDIR)"; \
+ fi || exit 1; \
+ if [ -f skip-this-dir ] ; then \
+ sh skip-this-dir; \
+ rm -f skip-this-dir; \
+ cd ..; rmdir $${dir} || true; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi
+
# This rule is used to build the modules which use FLAGS_TO_PASS. To
# build a target all-X means to cd to X and make all.
#
.PHONY: $(CHECK_MODULES) $(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES)
$(NATIVE_CHECK_MODULES):
- @if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+ @if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
dir=`echo $@ | sed -e 's/check-//'`; \
if [ -f ./$${dir}/Makefile ] ; then \
r=`pwd`; export r; \
if [ -f $${libsrcdir}/configure ] ; then \
rm -f no-such-file skip-this-dir; \
CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
- $(CONFIG_ARGUMENTS) $${srcdiroption} \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
--with-target-subdir="$(TARGET_SUBDIR)"; \
else \
rm -f no-such-file skip-this-dir; \
CONFIG_SITE=no-such-file $(SHELL) $$s/configure \
- $(CONFIG_ARGUMENTS) $${srcdiroption} \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
--with-target-subdir="$(TARGET_SUBDIR)"; \
fi; \
if [ -f skip-this-dir ] ; then \
r=`pwd`; export r; \
s=`cd $(srcdir); pwd`; export s; \
$(SET_LIB_PATH) \
- (cd $(TARGET_SUBDIR)/$${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
+ (cd $(TARGET_SUBDIR)/$${dir}; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
else \
true; \
fi
r=`pwd`; export r; \
s=`cd $(srcdir); pwd`; export s; \
$(SET_LIB_PATH) \
- (cd $(TARGET_SUBDIR)/$${dir};$(MAKE) $(TARGET_FLAGS_TO_PASS) check);\
+ (cd $(TARGET_SUBDIR)/$${dir}; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) check);\
else \
true; \
fi
s=`cd $(srcdir); pwd` ; export s; \
$(SET_LIB_PATH) \
echo "Building runtime libraries"; \
- $(MAKE) $(BASE_FLAGS_TO_PASS) all
+ $(MAKE) $(BASE_FLAGS_TO_PASS) $(RECURSE_FLAGS) all
.PHONY: cross
cross: all-texinfo all-bison all-byacc all-binutils all-gas all-ld
s=`cd $(srcdir); pwd` ; export s; \
$(SET_LIB_PATH) \
echo "Building runtime libraries"; \
- $(MAKE) $(BASE_FLAGS_TO_PASS) all LANGUAGES="c c++"
+ $(MAKE) $(BASE_FLAGS_TO_PASS) $(RECURSE_FLAGS) \
+ LANGUAGES="c c++" all
.PHONY: check-gcc
check-gcc:
install-dosrel-fake:
+ALL_GCC = all-gcc
+ALL_GCC_C = $(ALL_GCC) all-target-newlib all-target-libgloss
+ALL_GCC_CXX = $(ALL_GCC_C) all-target-libstdc++ all-target-libstdc++-v3
# This is a list of inter-dependencies among modules.
all-apache:
all-gas: all-libiberty all-opcodes all-bfd all-intl
all-gash: all-tcl
all-gawk:
-ALL_GCC = all-gcc
-ALL_GCC_C = $(ALL_GCC) all-target-newlib all-target-libgloss
-ALL_GCC_CXX = $(ALL_GCC_C) all-target-libstdc++ all-target-libstdc++-v3
all-gcc: all-bison all-byacc all-binutils all-gas all-ld all-zlib
all-bootstrap: all-libiberty all-texinfo all-bison all-byacc all-binutils all-gas all-ld all-zlib
GDB_TK = all-tk all-tcl all-itcl all-tix all-libgui
all-gdb: all-libiberty all-opcodes all-bfd all-mmalloc all-readline all-bison all-byacc all-sim $(gdbnlmrequirements) $(GDB_TK)
all-gettext:
all-gnuserv:
-configure-target-gperf: $(ALL_GCC_C)
-all-target-gperf: configure-target-gperf all-target-libiberty all-target-libstdc++
+configure-target-gperf: $(ALL_GCC_CXX)
+all-target-gperf: configure-target-gperf all-target-libiberty all-target-libstdc++-v3
all-gprof: all-libiberty all-bfd all-opcodes all-intl
all-grep: all-libiberty
all-grez: all-libiberty all-bfd all-opcodes
check-target-libio: all-target-libstdc++
all-libgui: all-tcl all-tk all-tcl8.1 all-tk8.1 all-itcl
all-libiberty:
+
+all-build-libiberty: configure-build-libiberty
+
configure-target-libffi: $(ALL_GCC_C)
all-target-libffi: configure-target-libffi
configure-target-libjava: $(ALL_GCC_CXX) configure-target-zlib configure-target-boehm-gc configure-target-qthreads configure-target-libffi
all-target-libchill: configure-target-libchill all-target-libiberty
configure-target-libobjc: $(ALL_GCC_C)
all-target-libobjc: configure-target-libobjc all-target-libiberty
-all-m4: all-libiberty
+all-m4: all-libiberty all-texinfo
all-make: all-libiberty
all-mmalloc:
configure-target-newlib: $(ALL_GCC)
all-shellutils:
all-sid: all-tcl all-tk
all-sim: all-libiberty all-bfd all-opcodes all-readline all-cgen
-all-snavigator: all-tcl all-tk all-itcl all-db all-grep all-libgui
+all-snavigator: all-tcl all-tk all-itcl all-tix all-db all-grep all-libgui
all-tar: all-libiberty
all-tcl:
all-tcl8.1:
# NOTE: No double quotes in the below. It is used within shell script
# as VER="$(VER)"
-VER = ` if grep AM_INIT_AUTOMAKE $(TOOL)/configure.in >/dev/null 2>&1; then \
+VER = ` if grep 'AM_INIT_AUTOMAKE.*BFD_VERSION' $(TOOL)/configure.in >/dev/null 2>&1; then \
+ sed < bfd/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'; \
+ elif grep AM_INIT_AUTOMAKE $(TOOL)/configure.in >/dev/null 2>&1; then \
sed < $(TOOL)/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'; \
- else \
+ elif test -f $(TOOL)/version.in; then \
+ head -1 $(TOOL)/version.in; \
+ elif grep VERSION $(TOOL)/Makefile.in > /dev/null 2>&1; then \
sed < $(TOOL)/Makefile.in -n 's/^VERSION *= *//p'; \
+ else \
+ echo VERSION; \
fi`
PACKAGE = $(TOOL)
else true; fi
chmod -R og=u . || chmod og=u `find . -print`
#
+ # Create .gmo files from .po files.
+ for f in `find . -name '*.po' -type f -print`; do \
+ msgfmt -o `echo $$f | sed -e 's/\.po$$/.gmo/'` $$f ; \
+ done
+ #
-rm -f $(PACKAGE)-$(VER)
ln -s proto-toplev $(PACKAGE)-$(VER)
projects / deliverable / binutils-gdb.git / blobdiff