#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
#
srcdir = .
infodir = $(prefix)/info
includedir = $(prefix)/include
docdir = $(datadir)/doc
+GDB_NLM_DEPS =
SHELL = /bin/sh
INSTALL_DATA = $(INSTALL) -m 644
INSTALL_XFORM = $(INSTALL) -t='$(program_transform_name)'
-INSTALL_LAST_FAKE = install_last_fake
-INSTALL_LAST_REAL = install_last_real
-INSTALL_LAST = $(INSTALL_LAST_FAKE)
+INSTALL_DOSREL = install-dosrel-fake
AS = as
AR = ar
# We don't specify -g -O because many compilers don't support -g -O,
# and/or -O is broken in and of itself.
CFLAGS = -g
+LIBCFLAGS = $(CFLAGS)
+CFLAGS_FOR_TARGET = $(CFLAGS)
+LIBCFLAGS_FOR_TARGET = $(CFLAGS_FOR_TARGET)
+PICFLAG =
+PICFLAG_FOR_TARGET =
# start-sanitize-chill
CHILLFLAGS = $(CFLAGS)
# end-sanitize-chill
CXX = gcc
-# Use -O to stress test the compiler.
-CXXFLAGS = -g -O -fexternal-templates
+# Use -O2 to stress test the compiler.
+CXXFLAGS = -g -O2
+LIBCXXFLAGS = $(CXXFLAGS) -fno-implicit-templates
+CXXFLAGS_FOR_TARGET = $(CXXFLAGS)
+LIBCXXFLAGS_FOR_TARGET = $(CXXFLAGS_FOR_TARGET) -fno-implicit-templates
RANLIB = ranlib
NM = nm
else echo runtest ; fi`
-# libraries that may need to be augmented on a system-by-system basis
-X11_LIB = -lX11
-
# compilers to use to create programs which must be run in the build
# environment.
CC_FOR_BUILD = $(CC)
SUBDIRS = "this is set via configure, don't edit this"
OTHERS =
+# This is set by the configure script to the list of directories which
+# should be built using the target tools.
+TARGET_CONFIGDIRS = libiberty libgloss newlib libio librx libstdc++ libg++ winsup
+
+# Target libraries are put under this directory:
+TARGET_SUBDIR = . # Changed by configure to $(target_alias) if cross.
+
+# This is set by the configure script to the arguments passed to configure.
+CONFIG_ARGUMENTS =
+
ALL = all.normal
INSTALL_TARGET = install-dirs \
$(INSTALL_MODULES) \
$(INSTALL_TARGET_MODULES) \
$(INSTALL_X11_MODULES) \
install-gcc \
- $(INSTALL_LAST)
+ $(INSTALL_DOSREL)
CC_FOR_TARGET = ` \
if [ -f $$r/gcc/Makefile ] ; then \
- if [ -f $$r/newlib/Makefile ] ; then \
- echo $$r/gcc/xgcc -B$$r/gcc/ -idirafter $$r/newlib/targ-include -idirafter $${srcroot}/newlib/libc/include -nostdinc; \
+ if [ -f $$r/$(TARGET_SUBDIR)/newlib/Makefile ] ; then \
+ echo $$r/gcc/xgcc -B$$r/gcc/ -idirafter $$r/$(TARGET_SUBDIR)/newlib/targ-include -idirafter $${srcroot}/newlib/libc/include -nostdinc; \
else \
echo $$r/gcc/xgcc -B$$r/gcc/; \
fi; \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(CC); \
else \
- t='$(program_transform_name)'; echo gcc | sed -e 's/brokensed/brokensed/' $$t; \
+ t='$(program_transform_name)'; echo gcc | sed -e 's/x/x/' $$t; \
fi; \
fi`
# start-sanitize-chill
CHILL_FOR_TARGET = ` \
if [ -f $$r/gcc/Makefile ] ; then \
- echo $$r/gcc/xgcc -B$$r/gcc/ -L$$r/chillrt/; \
+ echo $$r/gcc/xgcc -B$$r/gcc/ -L$$r/gcc/ch/runtime/; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(CC); \
else \
- t='$(program_transform_name)'; echo gcc | sed -e 's/brokensed/brokensed/' $$t; \
+ t='$(program_transform_name)'; echo gcc | sed -e 's/x/x/' $$t; \
fi; \
fi`
CXX_FOR_TARGET = ` \
if [ -f $$r/gcc/Makefile ] ; then \
- if [ -f $$r/newlib/Makefile ] ; then \
- echo $$r/gcc/xgcc -B$$r/gcc/ -idirafter $$r/newlib/targ-include -idirafter $${srcroot}/newlib/libc/include -nostdinc; \
+ if [ -f $$r/$(TARGET_SUBDIR)/newlib/Makefile ] ; then \
+ echo $$r/gcc/xgcc -B$$r/gcc/ -idirafter $$r/$(TARGET_SUBDIR)/newlib/targ-include -idirafter $${srcroot}/newlib/libc/include -nostdinc; \
else \
echo $$r/gcc/xgcc -B$$r/gcc/; \
fi; \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(CXX); \
else \
- t='$(program_transform_name)'; echo gcc | sed -e 's/brokensed/brokensed/' $$t; \
+ t='$(program_transform_name)'; echo gcc | sed -e 's/x/x/' $$t; \
fi; \
fi`
AS_FOR_TARGET = ` \
- if [ -f $$r/gas/Makefile ] ; then \
+ if [ -f $$r/gas/as.new ] ; then \
echo $$r/gas/as.new ; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(AS); \
else \
- t='$(program_transform_name)'; echo as | sed -e 's/brokensed/brokensed/' $$t ; \
+ t='$(program_transform_name)'; echo as | sed -e 's/x/x/' $$t ; \
+ fi; \
+ fi`
+
+LD_FOR_TARGET = ` \
+ if [ -f $$r/ld/ld.new ] ; then \
+ echo $$r/ld/ld.new ; \
+ else \
+ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+ echo $(LD); \
+ else \
+ t='$(program_transform_name)'; echo ld | sed -e 's/x/x/' $$t ; \
+ fi; \
+ fi`
+
+DLLTOOL_FOR_TARGET = ` \
+ if [ -f $$r/binutils/dlltool ] ; then \
+ echo $$r/binutils/dlltool ; \
+ else \
+ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+ echo $(DLLTOOL); \
+ else \
+ t='$(program_transform_name)'; echo dlltool | sed -e 's/x/x/' $$t ; \
fi; \
fi`
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(AR); \
else \
- t='$(program_transform_name)'; echo ar | sed -e 's/brokensed/brokensed/' $$t ; \
+ t='$(program_transform_name)'; echo ar | sed -e 's/x/x/' $$t ; \
fi; \
fi`
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(RANLIB); \
else \
- t='$(program_transform_name)'; echo ranlib | sed -e 's/brokensed/brokensed/' $$t ; \
+ t='$(program_transform_name)'; echo ranlib | sed -e 's/x/x/' $$t ; \
fi; \
fi`
NM_FOR_TARGET = ` \
- if [ -f $$r/binutils/Makefile ] ; then \
+ if [ -f $$r/binutils/nm.new ] ; then \
echo $$r/binutils/nm.new ; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(NM); \
else \
- t='$(program_transform_name)'; echo nm | sed -e 's/brokensed/brokensed/' $$t ; \
+ t='$(program_transform_name)'; echo nm | sed -e 's/x/x/' $$t ; \
fi; \
fi`
-
#### host and target specific makefile fragments come in here.
###
"CC_FOR_BUILD=$(CC_FOR_BUILD)" \
"CC_FOR_TARGET=$(CC_FOR_TARGET)" \
"CFLAGS=$(CFLAGS)" \
+ "CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \
$(start-sanitize-chill)\
"CHILLFLAGS=$(CHILLFLAGS)" \
"CHILL_FOR_TARGET=$(CHILL_FOR_TARGET)" \
$(end-sanitize-chill)\
"CXX_FOR_BUILD=$(CXX_FOR_BUILD)" \
"CXXFLAGS=$(CXXFLAGS)" \
+ "CXXFLAGS_FOR_TARGET=$(CXXFLAGS_FOR_TARGET)" \
"CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
+ "DLLTOOL_FOR_TARGET=$(DLLTOOL_FOR_TARGET)" \
"GCC_FOR_TARGET=$(CC_FOR_TARGET)" \
"INSTALL=$(INSTALL)" \
"INSTALL_DATA=$(INSTALL_DATA)" \
"INSTALL_XFORM=$(INSTALL_XFORM)" \
"LDFLAGS=$(LDFLAGS)" \
"LEX=$(LEX)" \
+ "LD_FOR_TARGET=$(LD_FOR_TARGET)" \
+ "LIBCFLAGS=$(LIBCFLAGS)" \
+ "LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
+ "LIBCXXFLAGS=$(LIBCXXFLAGS)" \
+ "LIBCXXFLAGS_FOR_TARGET=$(LIBCXXFLAGS_FOR_TARGET)" \
"M4=$(M4)" \
"MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
"NM_FOR_TARGET=$(NM_FOR_TARGET)" \
+ "PICFLAG=$(PICFLAG)" \
+ "PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \
"RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
"SHELL=$(SHELL)" \
"EXPECT=$(EXPECT)" \
# Flags that are concerned with the location of the X11 include files
# and library files
+#
+# NOTE: until the top-level is getting the values via autoconf, it only
+# causes problems to have this top-level Makefile overriding the autoconf-set
+# values in child directories. Only variables that don't conflict with
+# autoconf'ed ones should be passed by X11_FLAGS_TO_PASS for now.
+#
X11_FLAGS_TO_PASS = \
- "X11_INCLUDE_FLAGS=$(X11_INCLUDE_FLAGS)" \
- "X11_LIB_FLAGS=$(X11_LIB_FLAGS)" \
- "X11_LIB=$(X11_LIB)"
+ 'X11_EXTRA_CFLAGS=$(X11_EXTRA_CFLAGS)' \
+ 'X11_EXTRA_LIBS=$(X11_EXTRA_LIBS)'
# Flags to pass down to makes which are built with the target environment.
# The double $ decreases the length of the command line; the variables
'AR=$$(AR_FOR_TARGET)' \
'AS=$$(AS_FOR_TARGET)' \
'CC=$$(CC_FOR_TARGET)' \
+ 'CFLAGS=$$(CFLAGS_FOR_TARGET)' \
'CXX=$$(CXX_FOR_TARGET)' \
+ 'CXXFLAGS=$$(CXXFLAGS_FOR_TARGET)' \
+ 'DLLTOOL=$$(DLLTOOL_FOR_TARGET)' \
+ 'LD=$$(LD_FOR_TARGET)' \
+ 'LIBCFLAGS=$$(LIBCFLAGS_FOR_TARGET)' \
+ 'LIBCXXFLAGS=$$(LIBCXXFLAGS_FOR_TARGET)' \
'NM=$$(NM_FOR_TARGET)' \
+ 'PICFLAG=$$(PICFLAG_FOR_TARGET)' \
'RANLIB=$$(RANLIB_FOR_TARGET)'
TARGET_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_TARGET_FLAGS)
all-flex \
all-gas \
all-gawk \
- all-gdb \
all-gprof \
all-grep \
all-gzip \
all-make \
all-mmalloc \
all-opcodes \
- all-pagas \
all-patch \
all-prms \
all-rcs \
all-uudecode \
all-wdiff
-
# This is a list of the check targets for all of the modules which are
# compiled using $(FLAGS_TO_PASS).
-CHECK_MODULES = \
+# This is a list of the check targets for all of the modules which are
+# compiled using $(FLAGS_TO_PASS).
+#
+# The list is in two parts. The first lists those tools which
+# are tested as part of the host's native tool-chain, and not
+# tested in a cross configuration.
+NATIVE_CHECK_MODULES = \
+ check-byacc \
+ check-flex
+
+CROSS_CHECK_MODULES = \
check-autoconf \
check-bfd \
check-binutils \
- check-byacc \
check-cvs \
check-dejagnu \
check-diff \
check-etc \
check-fileutils \
check-find \
- check-flex \
check-gas \
check-gawk \
- check-gdb \
check-gprof \
check-grep \
check-gzip \
check-make \
check-mmcheckoc \
check-opcodes \
- check-pagas \
check-patch \
check-prms \
check-rcs \
check-uudecode \
check-wdiff
+CHECK_MODULES=$(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES)
+
# This is a list of the install targets for all of the modules which are
# compiled using $(FLAGS_TO_PASS).
INSTALL_MODULES = \
install-flex \
install-gas \
install-gawk \
- install-gdb \
- install-glob \
install-gprof \
install-grep \
install-gzip \
install-make \
install-mmalloc \
install-opcodes \
- install-pagas \
install-patch \
install-prms \
install-rcs \
# using $(X11_FLAGS_TO_PASS).
ALL_X11_MODULES = \
all-emacs \
+ all-emacs19 \
+ all-gdb \
all-expect \
all-gash \
all-tclX \
# compiled using $(X11_FLAGS_TO_PASS).
CHECK_X11_MODULES = \
check-emacs \
+ check-gdb \
check-expect \
check-gash \
check-tclX \
# compiled using $(X11_FLAGS_TO_PASS).
INSTALL_X11_MODULES = \
install-emacs \
+ install-emacs19 \
+ install-gdb \
install-expect \
install-gash \
install-tclX \
# This is a list of the targets for all of the modules which are compiled
# using $(TARGET_FLAGS_TO_PASS).
ALL_TARGET_MODULES = \
- $(start-sanitize-chill) \
- all-chillrt \
- $(end-sanitize-chill) \
- all-libio \
- all-libg++ \
- all-newlib \
- all-xiberty
+ all-target-libio \
+ all-target-libstdc++ \
+ all-target-librx \
+ all-target-libg++ \
+ all-target-newlib \
+ all-target-winsup \
+ all-target-libgloss \
+ all-target-libiberty
+
+# This is a list of the configure targets for all of the modules which
+# are compiled using the target tools.
+CONFIGURE_TARGET_MODULES = \
+ configure-target-libio \
+ configure-target-libstdc++ \
+ configure-target-librx \
+ configure-target-libg++ \
+ configure-target-newlib \
+ configure-target-winsup \
+ configure-target-libgloss \
+ configure-target-libiberty
# This is a list of the check targets for all of the modules which are
# compiled using $(TARGET_FLAGS_TO_PASS).
CHECK_TARGET_MODULES = \
- $(start-sanitize-chill) \
- check-chillrt \
- $(end-sanitize-chill) \
- check-libio \
- check-libg++ \
- check-newlib \
- check-xiberty
+ check-target-libio \
+ check-target-libstdc++ \
+ check-target-libg++ \
+ check-target-newlib \
+ check-target-winsup \
+ check-target-libiberty
# This is a list of the install targets for all of the modules which are
# compiled using $(TARGET_FLAGS_TO_PASS).
INSTALL_TARGET_MODULES = \
- $(start-sanitize-chill) \
- install-chillrt \
- $(end-sanitize-chill) \
- install-libio \
- install-libg++ \
- install-newlib \
- install-xiberty
-
-# This is a shell case of all modules which are compiled using
-# $(TARGET_FLAGS_TO_PASS), used in the do-X rule.
-TARGET_LIBS = libio | libg++ | newlib | xiberty
-# start-sanitize-chill
-TARGET_LIBS = chillrt | libio | libg++ | newlib | xiberty
-# end-sanitize-chill
+ install-target-libio \
+ install-target-libstdc++ \
+ install-target-libg++ \
+ install-target-newlib \
+ install-target-winsup \
+ install-target-libgloss \
+ install-target-libiberty
# The first rule in the file had better be this one. Don't put any above it.
all: all.normal
do-install-info \
do-installcheck \
do-mostlyclean \
- do-realclean \
+ do-maintainer-clean \
do-TAGS
.PHONY: $(DO_X)
$(DO_X):
@target=`echo $@ | sed -e 's/^do-//'`; \
r=`pwd`; export r; \
srcroot=`cd $(srcdir); pwd`; export srcroot; \
- for i in $(SUBDIRS); do \
+ for i in $(SUBDIRS) -dummy-; do \
if [ -f ./$$i/Makefile ]; then \
case $$i in \
- $(TARGET_LIBS) ) \
- for flag in $(EXTRA_TARGET_FLAGS); do \
- eval `echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
- done; \
- ;; \
gcc) \
for flag in $(EXTRA_GCC_FLAGS); do \
eval `echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
then true; else exit 1; fi; \
else true; fi; \
done
+ @target=`echo $@ | sed -e 's/^do-//'`; \
+ r=`pwd`; export r; \
+ srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ for i in $(TARGET_CONFIGDIRS) -dummy-; do \
+ if [ -f $(TARGET_SUBDIR)/$$i/Makefile ]; then \
+ for flag in $(EXTRA_TARGET_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
+ done; \
+ export AR AS CC CXX NM RANLIB; \
+ if (cd $(TARGET_SUBDIR)/$$i; \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ $${target}); \
+ then true; else exit 1; fi; \
+ else true; fi; \
+ done
# Here are the targets which correspond to the do-X targets.
.PHONY: info installcheck dvi install-info
-.PHONY: clean distclean mostlyclean realclean local-clean local-distclean
+.PHONY: clean distclean mostlyclean maintainer-clean realclean
+.PHONY: local-clean local-distclean local-maintainer-clean
info: do-info
installcheck: do-installcheck
dvi: do-dvi
local-distclean:
-rm -f Makefile config.status
+local-maintainer-clean:
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
+
clean: do-clean local-clean
mostlyclean: do-mostlyclean local-clean
distclean: do-distclean local-clean local-distclean
-realclean: do-realclean local-clean local-distclean
+maintainer-clean: local-maintainer-clean do-maintainer-clean local-clean
+maintainer-clean: local-distclean
+realclean: maintainer-clean
# Check target.
# Installation targets.
-.PHONY: install uninstall vault-install
+.PHONY: install uninstall source-vault binary-vault vault-install
install: $(INSTALL_TARGET)
uninstall:
@echo "the uninstall target is not supported in this tree"
+source-vault:
+ $(MAKE) -f ./release/Build-A-Release \
+ host=$(host_alias) source-vault
+
+binary-vault:
+ $(MAKE) -f ./release/Build-A-Release \
+ host=$(host_alias) target=$(target_alias)
+
vault-install:
@if [ -f ./release/vault-install ] ; then \
./release/vault-install $(host_alias) $(target_alias) ; \
# This rule is used to build the modules which use FLAGS_TO_PASS. To
# build a target all-X means to cd to X and make all.
-# all-glob is handled specially because it doesn't actually build.
-.PHONY: $(ALL_MODULES) all-glob
-$(ALL_MODULES) all-glob:
+#
+# all-gui, and all-libproc are handled specially because
+# they are still experimental, and if they fail to build, that
+# shouldn't stop "make all".
+.PHONY: $(ALL_MODULES) all-gui all-libproc
+$(ALL_MODULES) all-gui all-libproc:
@dir=`echo $@ | sed -e 's/all-//'`; \
if [ -f ./$${dir}/Makefile ] ; then \
r=`pwd`; export r; \
true; \
fi
-# This rule is used to check the modules which use FLAGS_TO_PASS. To
-# build a target check-X means to cd to X and make all.
-.PHONY: $(CHECK_MODULES)
-$(CHECK_MODULES):
+# These rules are used to check the modules which use FLAGS_TO_PASS.
+# To build a target check-X means to cd to X and make check. Some
+# modules are only tested in a native toolchain.
+
+.PHONY: $(CHECK_MODULES) $(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES)
+$(NATIVE_CHECK_MODULES):
+ @if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+ dir=`echo $@ | sed -e 's/check-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ r=`pwd`; export r; \
+ srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) check); \
+ else \
+ true; \
+ fi; \
+ fi
+
+$(CROSS_CHECK_MODULES):
@dir=`echo $@ | sed -e 's/check-//'`; \
if [ -f ./$${dir}/Makefile ] ; then \
r=`pwd`; export r; \
true; \
fi
+# This rule is used to configure the modules which are built with the
+# target tools.
+.PHONY: $(CONFIGURE_TARGET_MODULES)
+$(CONFIGURE_TARGET_MODULES):
+ @dir=`echo $@ | sed -e 's/configure-target-//'`; \
+ if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
+ true; \
+ elif echo " $(TARGET_CONFIGDIRS) " | grep " $${dir} " >/dev/null 2>&1; then \
+ if [ -d $(srcdir)/$${dir} ]; then \
+ [ -d $(TARGET_SUBDIR)/$${dir} ] || mkdir $(TARGET_SUBDIR)/$${dir};\
+ r=`pwd`; export r; \
+ srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ AR="$(AR_FOR_TARGET)"; export AR; \
+ AS="$(AS_FOR_TARGET)"; export AS; \
+ CC="$(CC_FOR_TARGET)"; export CC; \
+ CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
+ CXX="$(CXX_FOR_TARGET)"; export CXX; \
+ CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
+ LD="$(LD_FOR_TARGET)"; export LD; \
+ NM="$(NM_FOR_TARGET)"; export NM; \
+ RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
+ cd $(TARGET_SUBDIR)/$${dir}; \
+ $${srcroot}/configure $(CONFIG_ARGUMENTS) --srcdir=$${srcroot}/$${dir}; \
+ else \
+ true; \
+ fi \
+ else \
+ true; \
+ fi
+
# This rule is used to build the modules which use TARGET_FLAGS_TO_PASS.
# To build a target all-X means to cd to X and make all.
.PHONY: $(ALL_TARGET_MODULES)
$(ALL_TARGET_MODULES):
- @dir=`echo $@ | sed -e 's/all-//'`; \
- if [ -f ./$${dir}/Makefile ] ; then \
+ @dir=`echo $@ | sed -e 's/all-target-//'`; \
+ if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
r=`pwd`; export r; \
srcroot=`cd $(srcdir); pwd`; export srcroot; \
- (cd $${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
+ (cd $(TARGET_SUBDIR)/$${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
else \
true; \
fi
# To build a target install-X means to cd to X and make install.
.PHONY: $(CHECK_TARGET_MODULES)
$(CHECK_TARGET_MODULES):
- @dir=`echo $@ | sed -e 's/check-//'`; \
- if [ -f ./$${dir}/Makefile ] ; then \
+ @dir=`echo $@ | sed -e 's/check-target-//'`; \
+ if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
r=`pwd`; export r; \
srcroot=`cd $(srcdir); pwd`; export srcroot; \
- (cd $${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) check); \
+ (cd $(TARGET_SUBDIR)/$${dir};$(MAKE) $(TARGET_FLAGS_TO_PASS) check);\
else \
true; \
fi
# and make install.
.PHONY: $(INSTALL_TARGET_MODULES)
$(INSTALL_TARGET_MODULES): install-dirs
- @dir=`echo $@ | sed -e 's/install-//'`; \
- if [ -f ./$${dir}/Makefile ] ; then \
+ @dir=`echo $@ | sed -e 's/install-target-//'`; \
+ if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
r=`pwd`; export r; \
srcroot=`cd $(srcdir); pwd`; export srcroot; \
- (cd $${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
+ (cd $(TARGET_SUBDIR)/$${dir}; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
else \
true; \
fi
# EXPERIMENTAL STUFF
# This rule is used to install the modules which use FLAGS_TO_PASS.
# To build a target install-X means to cd to X and make install.
-.PHONY: $(INSTALL_LAST_REAL)
-$(INSTALL_LAST_REAL): install-dirs
+.PHONY: install-dosrel
+install-dosrel: install-dirs info
@dir=`echo $@ | sed -e 's/install-//'`; \
if [ -f ./$${dir}/Makefile ] ; then \
r=`pwd`; export r; \
true; \
fi
-install_last_fake:
+install-dosrel-fake:
# This is a list of inter-dependencies among modules.
all-autoconf: all-m4
all-bfd:
-all-binutils: all-libiberty all-opcodes all-bfd all-flex
+all-binutils: all-libiberty all-opcodes all-bfd all-flex all-byacc
all-byacc:
-# start-sanitize-chill
-all-chillrt: all-binutils all-gas all-gcc all-newlib
-# end-sanitize-chill
all-cvs:
-all-dejagnu:
+all-dejagnu: all-tcl all-expect all-tk
all-diff: all-libiberty
all-emacs:
+all-emacs19: all-byacc
all-etc:
all-expect: all-tcl all-tk
all-fileutils: all-libiberty
all-gas: all-libiberty all-opcodes all-bfd
all-gash: all-tcl
all-gawk:
-all-gcc: all-libiberty all-byacc all-binutils all-gas all-pagas
-all-gdb: all-libiberty all-opcodes all-bfd all-mmalloc all-readline all-glob all-byacc all-sim
-all-glob:
+ALL_GCC = all-gcc
+all-gcc: all-libiberty all-byacc all-binutils all-gas all-ld
+all-gdb: all-libiberty all-opcodes all-bfd all-mmalloc all-readline all-byacc all-sim $(gdbnlmrequirements)
all-gprof: all-libiberty all-bfd
all-grep: all-libiberty
+all-gui: all-gdb all-libproc all-target-librx
all-gzip: all-libiberty
all-hello: all-libiberty
all-indent:
-all-ispell: all-emacs
+all-ispell: all-emacs19
all-ld: all-libiberty all-bfd all-byacc all-flex
-all-libg++: all-gas all-pagas all-ld all-gcc all-xiberty all-newlib all-libio
-all-libio: all-gas all-pagas all-ld all-gcc all-xiberty all-newlib
+configure-target-libg++: $(ALL_GCC)
+all-target-libg++: configure-target-libg++ all-gas all-ld all-gcc all-target-libiberty all-target-newlib all-target-libio all-target-librx all-target-libstdc++
+configure-target-libgloss: $(ALL_GCC)
+all-target-libgloss: configure-target-libgloss
+configure-target-libio: $(ALL_GCC)
+all-target-libio: configure-target-libio all-gas all-ld all-gcc all-target-libiberty all-target-newlib
all-libiberty:
+configure-target-librx: $(ALL_GCC) configure-target-newlib
+all-target-librx: configure-target-librx
+configure-target-libstdc++: $(ALL_GCC)
+all-target-libstdc++: configure-target-libstdc++ all-gas all-ld all-gcc all-target-libiberty all-target-newlib all-target-libio
all-m4: all-libiberty
all-make: all-libiberty
all-mmalloc:
-all-newlib: all-binutils all-gas all-pagas all-gcc
+configure-target-newlib: $(ALL_GCC)
+all-target-newlib: configure-target-newlib all-binutils all-gas all-gcc
all-opcodes: all-bfd
-all-patch:
+all-patch: all-libiberty
all-prms: all-libiberty
all-rcs:
all-readline:
all-tgas: all-libiberty all-bfd
all-time:
all-wdiff:
+all-target-winsup: all-target-newlib configure-target-winsup
+configure-target-winsup: configure-target-newlib
all-uudecode: all-libiberty
-all-xiberty: all-gcc all-newlib
+configure-target-libiberty: $(ALL_GCC)
+all-target-libiberty: configure-target-libiberty all-gcc all-ld all-target-newlib
### other supporting targets
# distribution (perhaps it would be better to include it anyway).
DEVO_SUPPORT= README Makefile.in configure configure.in \
config.guess config.sub config move-if-change \
- COPYING COPYING.LIB install.sh
+ mpw-README mpw-build.in mpw-config.in mpw-configure \
+ COPYING COPYING.LIB install.sh cfg-ml-com.in cfg-ml-pos.in
# Files in devo/etc used in any net release.
# ChangeLog omitted because it may refer to files which are not in this
# distribution (perhaps it would be better to include it anyway).
ETC_SUPPORT= Makefile.in cfg-paper.texi configure.in configure.man \
- configure.texi standards.texi make-stds.texi
-
-GDB_SUPPORT_DIRS= bfd include libiberty mmalloc opcodes readline glob sim
-GDB_SUPPORT_FILES= $(GDB_SUPPORT_DIRS)
-
-.PHONY: setup-dirs-gdb gdb.tar.gz make-gdb.tar.gz
-setup-dirs-gdb:
- $(start-sanitize-Sanitize)
- @if [ -f .Sanitize ] ; then echo "RUN Sanitize FIRST!" ; false ; fi ;
- $(end-sanitize-Sanitize)
- ./configure sun4
- $(MAKE) clean
- ./configure -rm sun4
- chmod og=u `find etc $(DEVO_SUPPORT) $(GDB_SUPPORT_FILES) -print`
-
-gdb.tar.gz: setup-dirs-gdb
- (cd gdb; $(MAKE) -f Makefile.in make-proto-gdb.dir BISON="byacc")
- (cd gdb; $(MAKE) -f Makefile.in make-proto-testsuite.dir)
- $(MAKE) $(MFLAGS) -f Makefile.in make-gdb.tar.gz
-
-make-gdb.tar.gz: $(DEVO_SUPPORT) $(GDB_SUPPORT_DIRS) gdb texinfo/texinfo.tex
- rm -rf proto-toplev; mkdir proto-toplev
- ln -s ../gdb/proto-gdb.dir proto-toplev/gdb
- (cd proto-toplev; for i in $(DEVO_SUPPORT) $(GDB_SUPPORT_DIRS); do \
- ln -s ../$$i . ; \
- done)
- mkdir proto-toplev/etc
- (cd proto-toplev/etc; for i in $(ETC_SUPPORT); do \
- ln -s ../../etc/$$i . ; \
- done)
- # Put only one copy (four hard links) of COPYING in the tar file.
- rm proto-toplev/bfd/COPYING
- ln proto-toplev/gdb/COPYING proto-toplev/bfd/COPYING
- rm proto-toplev/include/COPYING
- ln proto-toplev/gdb/COPYING proto-toplev/include/COPYING
- rm proto-toplev/readline/COPYING
- ln proto-toplev/gdb/COPYING proto-toplev/readline/COPYING
-
- # Change the bug reporting address in configure to bug-gdb
- rm proto-toplev/configure
- sed -e 's/configure@cygnus.com/bug-gdb@prep.ai.mit.edu/' \
- <configure >proto-toplev/configure
- chmod a+x proto-toplev/configure
-
- # Take out texinfo and glob from configurable dirs
- rm proto-toplev/configure.in
- sed -e '/^host_tools=/s/texinfo //' \
- -e '/^host_libs=/s/glob //' \
- <configure.in >proto-toplev/configure.in
-
- # Take out texinfo from a few places; make simple BISON=bison line.
- rm proto-toplev/Makefile.in
- sed -e '/^all\.normal: /s/\all-texinfo //' \
- -e '/^ install-texinfo /d' \
- -e '/^BISON = /,/^$$/d' \
- -e '/^# BISON:/s/.*/BISON = bison -y/' \
- <Makefile.in >proto-toplev/Makefile.in
-
- mkdir proto-toplev/texinfo
- ln -s ../../texinfo/texinfo.tex proto-toplev/texinfo/
- ln -s ../../texinfo/gpl.texinfo proto-toplev/texinfo/
- ln -s ../../texinfo/tex3patch proto-toplev/texinfo/
- chmod og=u `find proto-toplev -print`
- (VER=`sed <gdb/Makefile.in -n 's/VERSION = //p'`; \
- echo "==> Making gdb-$$VER.tar.gz"; \
- rm -f gdb-$$VER; ln -s proto-toplev gdb-$$VER; \
- tar cfh - gdb-$$VER \
- | $(GZIPPROG) -v -9 >gdb-$$VER.tar.gz)
-
- # Make the testsuite archive separately.
- ln -s ../../gdb/proto-testsuite.dir/testsuite proto-toplev/gdb/testsuite
- # Blow away the Chill test that requires a Chill compiled executable,
- # since GNU Chill is not yet publically available.
- rm -rf proto-toplev/gdb/testsuite/gdb.t31
-
- # Put a copy of COPYING in the tar file.
- ln proto-toplev/gdb/COPYING proto-toplev/gdb/testsuite/COPYING
- chmod og=u `find proto-toplev/gdb/testsuite -print`
- (VER=`sed <gdb/Makefile.in -n 's/VERSION = //p'`; \
- echo "==> Making gdb-$$VER-testsuite.tar.gz"; \
- tar cfh - gdb-$$VER/configure gdb-$$VER/config.guess \
- gdb-$$VER/config.sub gdb-$$VER/move-if-change \
- gdb-$$VER/gdb/testsuite \
- | $(GZIPPROG) -v -9 >gdb-$$VER-testsuite.tar.gz)
+ configure.texi standards.texi make-stds.texi \
+ configure.info* standards.info* cfg-paper.info*
# When you use `make setup-dirs' or `make taz' you should always redefine
# this macro.
SUPPORT_FILES = list-of-support-files-for-tool-in-question
-# Directories that might want `make diststuff' run.
-DISTSTUFFDIRS= ld gprof gdb libg++ binutils gnats
# Files where "byacc" (Cygnus version) should be changed to "bison -y" (FSF).
DISTBISONFILES= binutils/Makefile.in gas/Makefile.in gdb/Makefile.in
-# Directories where "info" should be built.
-DISTDOCDIRS= ld gprof binutils gas bfd libg++ libio gdb gnats send-pr
.PHONY: taz
<Makefile.in >tmp
mv -f tmp Makefile.in
#
+ $(start-sanitize-Sanitize)
+ @if [ -f .Sanitize ] ; then echo "RUN Sanitize FIRST!" ; false ; fi ;
+ $(end-sanitize-Sanitize)
./configure sun4
- # Doc files don't change; include them in distribution.
- for f in $(DISTDOCDIRS) ; do \
- if [ -r $$f/Makefile ]; then \
- (cd $$f ; $(MAKE) info) || exit 1 ; \
- else true ; fi ; \
- done
- # Make links, and run "make diststuff" when needed.
- # The `echo' for setting `p' is to convert all whitespace to spaces.
- # Then the `case' further below should tell whether $$d is in
- # DISTSTUFFDIRS.
+ [ -z "$(CONFIGURE_TARGET_MODULES)" ] \
+ || $(MAKE) $(CONFIGURE_TARGET_MODULES) ALL_GCC="" \
+ CC_FOR_TARGET="$(CC) CXX_FOR_TARGET="$(CXX)"
+ # Make links, and run "make diststuff" or "make info" when needed.
rm -rf proto-toplev ; mkdir proto-toplev
set -e ; dirs="$(TOOL) $(DEVO_SUPPORT) $(SUPPORT_FILES)" ; \
- p=" `echo $(DISTSTUFFDIRS)` " ; \
for d in $$dirs ; do \
if [ -d $$d ]; then \
- case " $$p " in \
- *" $$d "*) \
- echo making diststuff in $$d ; \
- (cd $$d ; pwd ; $(MAKE) diststuff ) || exit 1 ;; \
- esac ; \
+ if [ ! -f $$d/Makefile ] ; then true ; \
+ elif grep '^diststuff:' $$d/Makefile >/dev/null ; then \
+ (cd $$d ; $(MAKE) diststuff ) || exit 1 ; \
+ elif grep '^info:' $$d/Makefile >/dev/null ; then \
+ (cd $$d ; $(MAKE) info ) || exit 1 ; \
+ fi ; \
if [ -d $$d/proto-$$d.dir ]; then \
ln -s ../$$d/proto-$$d.dir proto-toplev/$$d ; \
else \
fi ; \
else ln -s ../$$d proto-toplev/$$d ; fi ; \
done
+ cd etc ; $(MAKE) info
$(MAKE) distclean
#
mkdir proto-toplev/etc
- (cd proto-toplev/etc; for i in $(ETC_SUPPORT); do \
+ (cd proto-toplev/etc; \
+ for i in $(ETC_SUPPORT); do \
ln -s ../../etc/$$i . ; \
- done)
+ done)
#
- # Take out texinfo and glob from configurable dirs
+ # Take out texinfo from configurable dirs
rm proto-toplev/configure.in
sed -e '/^host_tools=/s/texinfo //' \
- -e '/^host_libs=/s/glob //' \
<configure.in >proto-toplev/configure.in
#
mkdir proto-toplev/texinfo
# The FSF "binutils" release includes gprof and ld.
.PHONY: binutils.tar.gz
-BINUTILS_SUPPORT_DIRS= bfd include libiberty opcodes ld gprof
+BINUTILS_SUPPORT_DIRS= bfd gas include libiberty opcodes ld gprof
binutils.tar.gz: $(DIST_SUPPORT) $(BINUTILS_SUPPORT_DIRS) binutils
$(MAKE) -f Makefile.in taz TOOL=binutils \
- SUPPORT_FILES="$(BINUTILS_SUPPORT_DIRS)"
+ SUPPORT_FILES="$(BINUTILS_SUPPORT_DIRS) makeall.bat configure.bat"
.PHONY: gas+binutils.tar.gz
GASB_SUPPORT_DIRS= $(GAS_SUPPORT_DIRS) binutils ld gprof
gas+binutils.tar.gz: $(DIST_SUPPORT) $(GASB_SUPPORT_DIRS) gas
$(MAKE) -f Makefile.in taz TOOL=gas \
- SUPPORT_FILES="$(GASB_SUPPORT_DIRS)"
+ SUPPORT_FILES="$(GASB_SUPPORT_DIRS) makeall.bat configure.bat"
.PHONY: libg++.tar.gz
-LIBGXX_SUPPORT_DIRS=include libio libiberty xiberty
+LIBGXX_SUPPORT_DIRS=include libstdc++ libio librx libiberty
libg++.tar.gz: $(DIST_SUPPORT) libg++
$(MAKE) -f Makefile.in taz TOOL=libg++ \
SUPPORT_FILES="$(LIBGXX_SUPPORT_DIRS)"
$(MAKE) -f Makefile.in taz TOOL=gnats \
SUPPORT_FILES="$(GNATS_SUPPORT_DIRS)"
+.PHONY: gdb.tar.gz
+GDB_SUPPORT_DIRS= bfd include libiberty mmalloc opcodes readline sim utils
+GDBTK_SUPPORT_DIRS= `if [ -d tcl -a -d tk ] ; then echo tcl tk ; fi`
+gdb.tar.gz: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
+ $(MAKE) -f Makefile.in taz TOOL=gdb \
+ SUPPORT_FILES="$(GDB_SUPPORT_DIRS) $(GDBTK_SUPPORT_DIRS)"
+
+.PHONY: newlib.tar.gz
+NEWLIB_SUPPORT_DIRS=libgloss
+# taz configures for the sun4 target which won't configure newlib.
+# We need newlib configured so that the .info files are made.
+# Unfortunately, it is not enough to just configure newlib separately:
+# taz will build the .info files but since SUBDIRS won't contain newlib,
+# distclean won't be run (leaving Makefile, config.status, and the tmp files
+# used in building the .info files, eg: *.def, *.ref).
+# Compensate here by configuring newlib for a simple (no multilib support)
+# cross target (sparc64), building the info files, and doing make distclean
+# ourselves.
+newlib.tar.gz: $(DIST_SUPPORT) $(NEWLIB_SUPPORT_DIRS) newlib
+ rootme=`pwd` ; \
+ cd newlib && ../configure --srcdir $$rootme/newlib \
+ --host sun4 --target sparc64-elf
+ cd newlib ; make info
+ cd newlib ; make distclean
+ $(MAKE) -f Makefile.in taz TOOL=newlib \
+ SUPPORT_FILES="$(NEWLIB_SUPPORT_DIRS)" \
+ DEVO_SUPPORT="$(DEVO_SUPPORT) COPYING.NEWLIB" newlib
+
.NOEXPORT:
MAKEOVERRIDES=