SHELL = /bin/sh
-INSTALL = $$s/install-sh -c
+INSTALL = $(SHELL) $$s/install-sh -c
INSTALL_PROGRAM = $(INSTALL)
INSTALL_DATA = $(INSTALL) -m 644
HOST_PREFIX =
HOST_PREFIX_1 = loser-
-# We don't specify -g -O because many compilers don't support -g -O,
-# and/or -O is broken in and of itself.
+# These flag values are normally overridden by the configure script.
CFLAGS = -g
+CXXFLAGS = -g -O2
+
LIBCFLAGS = $(CFLAGS)
CFLAGS_FOR_TARGET = $(CFLAGS)
LDFLAGS_FOR_TARGET =
CHILLFLAGS = $(CFLAGS)
CHILL_LIB = -lchill
# end-sanitize-chill
-CXX = gcc
+CXX = c++
# Use -O2 to stress test the compiler.
-CXXFLAGS = -g -O2
LIBCXXFLAGS = $(CXXFLAGS) -fno-implicit-templates
CXXFLAGS_FOR_TARGET = $(CXXFLAGS)
LIBCXXFLAGS_FOR_TARGET = $(CXXFLAGS_FOR_TARGET) -fno-implicit-templates
RANLIB = ranlib
DLLTOOL = dlltool
+WINDRES = windres
NM = nm
+
+LD = ld
+
# Not plain GZIP, since gzip looks there for extra command-line options.
GZIPPROG = gzip
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(CXX); \
else \
- t='$(program_transform_name)'; echo gcc | sed -e 's/x/x/' $$t; \
+ t='$(program_transform_name)'; echo c++ | sed -e 's/x/x/' $$t; \
fi; \
fi`
fi; \
fi`
+WINDRES_FOR_TARGET = ` \
+ if [ -f $$r/binutils/windres ] ; then \
+ echo $$r/binutils/windres ; \
+ else \
+ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+ echo $(WINDRES); \
+ else \
+ t='$(program_transform_name)'; echo windres | sed -e 's/x/x/' $$t ; \
+ fi; \
+ fi`
+
AR_FOR_TARGET = ` \
if [ -f $$r/binutils/ar ] ; then \
echo $$r/binutils/ar ; \
"EXPECT=$(EXPECT)" \
"RUNTEST=$(RUNTEST)" \
"RUNTESTFLAGS=$(RUNTESTFLAGS)" \
+ "WINDRES_FOR_TARGET=$(WINDRES_FOR_TARGET)" \
"YACC=$(BISON)" \
"exec_prefix=$(exec_prefix)" \
"prefix=$(prefix)" \
'CC=$(CC)' \
'CXX=$(CXX)' \
'DLLTOOL=$(DLLTOOL)' \
+ 'LD=$(LD)' \
'NM=$(NM)' \
- 'RANLIB=$(RANLIB)'
-
+ 'RANLIB=$(RANLIB)' \
+ 'WINDRES=$(WINDRES)'
FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_HOST_FLAGS)
'LIBCXXFLAGS=$$(LIBCXXFLAGS_FOR_TARGET)' \
'NM=$$(NM_FOR_TARGET)' \
'PICFLAG=$$(PICFLAG_FOR_TARGET)' \
- 'RANLIB=$$(RANLIB_FOR_TARGET)'
+ 'RANLIB=$$(RANLIB_FOR_TARGET)' \
+ 'WINDRES=$$(WINDRES_FOR_TARGET)'
TARGET_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_TARGET_FLAGS)
'HOST_PREFIX_1=$(HOST_PREFIX_1)' \
'NM=$(NM)' \
'RANLIB=$$(RANLIB_FOR_TARGET)' \
+ 'WINDRES=$$(WINDRES_FOR_TARGET)' \
"GCC_FOR_TARGET=$(GCC_FOR_TARGET)" \
`if test x"$(LANGUAGES)" != x; then echo "LANGUAGES=$(LANGUAGES)"; fi` \
`if test x"$(STMP_FIXPROTO)" != x; then echo "STMP_FIXPROTO=$(STMP_FIXPROTO)"; fi` \
ALL_MODULES = \
all-apache \
all-autoconf \
+ all-automake \
all-bash \
all-bfd \
all-binutils \
all-flex \
all-gas \
all-gawk \
+ all-gnuserv \
all-gprof \
all-grep \
all-grez \
all-gzip \
all-hello \
+ $(start-sanitize-ide) \
+ all-ilu \
+ $(end-sanitize-ide) \
all-indent \
all-inet \
all-ispell \
all-itcl \
all-ld \
all-libiberty \
+ $(start-sanitize-ide) \
+ all-libide \
+ $(end-sanitize-ide) \
all-m4 \
all-make \
all-mmalloc \
all-tgas \
all-time \
all-uudecode \
+ $(start-sanitize-ide) \
+ all-vmake \
+ $(end-sanitize-ide) \
all-wdiff
# This is a list of the check targets for all of the modules which are
CROSS_CHECK_MODULES = \
check-apache \
check-autoconf \
+ check-automake \
check-bash \
check-bfd \
check-binutils \
check-find \
check-gas \
check-gawk \
+ check-gnuserv \
check-gprof \
check-grep \
check-gzip \
check-hello \
+ $(start-sanitize-ide) \
+ check-ilu \
+ $(end-sanitize-ide) \
check-indent \
check-inet \
check-ispell \
check-itcl \
check-ld \
check-libiberty \
+ $(start-sanitize-ide) \
+ check-libide \
+ $(end-sanitize-ide) \
check-m4 \
check-make \
check-mmcheckoc \
check-tgas \
check-time \
check-uudecode \
+ $(start-sanitize-ide) \
+ check-vmake \
+ $(end-sanitize-ide) \
check-wdiff
CHECK_MODULES=$(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES)
# This is a list of the install targets for all of the modules which are
# compiled using $(FLAGS_TO_PASS).
+# We put install-opcodes before install-binutils because the installed
+# binutils might be on PATH, and they might need the shared opcodes
+# library.
INSTALL_MODULES = \
install-apache \
install-autoconf \
+ install-automake \
install-bash \
install-bfd \
+ install-opcodes \
install-binutils \
install-byacc \
install-cvs \
install-flex \
install-gas \
install-gawk \
+ install-gnuserv \
install-gprof \
install-grep \
install-grez \
install-gzip \
install-hello \
+ $(start-sanitize-ide) \
+ install-ilu \
+ $(end-sanitize-ide) \
install-indent \
install-inet \
install-ispell \
install-itcl \
install-ld \
install-libiberty \
+ $(start-sanitize-ide) \
+ install-libide \
+ $(end-sanitize-ide) \
install-m4 \
install-make \
install-mmalloc \
- install-opcodes \
install-patch \
install-perl \
install-prms \
install-tgas \
install-time \
install-uudecode \
+ $(start-sanitize-ide) \
+ install-vmake \
+ $(end-sanitize-ide) \
install-wdiff
# This is a list of the targets for all of the modules which are compiled
all-target-winsup \
all-target-libgloss \
all-target-libiberty \
+ all-target-gperf \
all-target-examples
# This is a list of the configure targets for all of the modules which
configure-target-winsup \
configure-target-libgloss \
configure-target-libiberty \
+ configure-target-gperf \
configure-target-examples
# This is a list of the check targets for all of the modules which are
check-target-libg++ \
check-target-newlib \
check-target-winsup \
- check-target-libiberty
+ check-target-libiberty \
+ check-target-gperf
# This is a list of the install targets for all of the modules which are
# compiled using $(TARGET_FLAGS_TO_PASS).
install-target-newlib \
install-target-winsup \
install-target-libgloss \
- install-target-libiberty
+ install-target-libiberty \
+ install-target-gperf
# This is a list of the targets for which we can do a clean-{target}.
CLEAN_MODULES = \
clean-apache \
clean-autoconf \
+ clean-automake \
clean-bash \
clean-bfd \
clean-binutils \
clean-flex \
clean-gas \
clean-gawk \
+ clean-gnuserv \
clean-gprof \
clean-grep \
clean-grez \
clean-gzip \
clean-hello \
+ $(start-sanitize-ide) \
+ clean-ilu \
+ $(end-sanitize-ide) \
clean-indent \
clean-inet \
clean-ispell \
clean-itcl \
clean-ld \
clean-libiberty \
+ $(start-sanitize-ide) \
+ clean-libide \
+ $(end-sanitize-ide) \
clean-m4 \
clean-make \
clean-mmalloc \
clean-tgas \
clean-time \
clean-uudecode \
+ $(start-sanitize-ide) \
+ clean-vmake \
+ $(end-sanitize-ide) \
clean-wdiff
# All of the target modules that can be cleaned
clean-target-winsup \
clean-target-libgloss \
clean-target-libiberty \
+ clean-target-gperf \
clean-target-examples
# All of the x11 modules that can be cleaned
done; \
;; \
esac ; \
- export AR AS CC CXX NM RANLIB DLLTOOL; \
+ export AR AS CC CXX LD NM RANLIB DLLTOOL WINDRES; \
if (cd ./$$i; \
$(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
- "CC=$${CC}" "CXX=$${CXX}" "NM=$${NM}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
"RANLIB=$${RANLIB}" \
- "DLLTOOL=$${DLLTOOL}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
$${target}); \
then true; else exit 1; fi; \
else true; fi; \
for flag in $(EXTRA_TARGET_FLAGS); do \
eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'|"`; \
done; \
- export AR AS CC CXX NM RANLIB DLLTOOL; \
+ export AR AS CC CXX LD NM RANLIB DLLTOOL WINDRES; \
if (cd $(TARGET_SUBDIR)/$$i; \
$(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
- "CC=$${CC}" "CXX=$${CXX}" "NM=$${NM}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
"RANLIB=$${RANLIB}" \
- "DLLTOOL=$${DLLTOOL}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
$${target}); \
then true; else exit 1; fi; \
else true; fi; \
LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
NM="$(NM_FOR_TARGET)"; export NM; \
RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
+ WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
echo Configuring in $(TARGET_SUBDIR)/$${dir}; \
cd $(TARGET_SUBDIR)/$${dir}; \
case $(srcdir) in \
# This is a list of inter-dependencies among modules.
all-apache:
all-autoconf: all-m4
+all-automake:
all-bash:
all-bfd:
all-binutils: all-libiberty all-opcodes all-bfd all-flex all-byacc
all-gash: all-tcl
all-gawk:
ALL_GCC = all-gcc
-all-gcc: all-libiberty all-byacc all-binutils all-gas all-ld
+all-gcc: all-byacc all-binutils all-gas all-ld
all-bootstrap: all-libiberty all-byacc all-binutils all-gas all-ld
GDB_TK = all-tk all-tcl
all-gdb: all-libiberty all-opcodes all-bfd all-mmalloc all-readline all-byacc all-sim $(gdbnlmrequirements) $(GDB_TK)
+all-gnuserv:
+configure-target-gperf: $(ALL_GCC)
+all-target-gperf: configure-target-gperf all-target-libiberty all-target-libg++
all-gprof: all-libiberty all-bfd all-opcodes
all-grep: all-libiberty
all-grez: all-libiberty all-bfd all-opcodes
all-guile:
all-gzip: all-libiberty
all-hello: all-libiberty
+# start-sanitize-ide
+all-ilu:
+# end-sanitize-ide
all-indent:
all-inet: all-tcl all-send-pr all-perl
all-ispell: all-emacs19
configure-target-libio: $(ALL_GCC)
all-target-libio: configure-target-libio all-gas all-ld all-gcc all-target-libiberty all-target-newlib
all-libiberty:
+# start-sanitize-ide
+all-libide: all-tcl all-tk all-itcl all-ilu
+# end-sanitize-ide
configure-target-librx: $(ALL_GCC) configure-target-newlib
all-target-librx: configure-target-librx
configure-target-libstdc++: $(ALL_GCC)
all-send-pr: all-prms
all-shellutils:
all-sim: all-libiberty all-bfd all-opcodes
-all-sn: all-tcl all-tk all-itcl all-db
+all-sn: all-tcl all-tk all-itcl all-db all-grep
all-tar: all-libiberty
all-tcl:
all-tclX: all-tcl all-tk
all-textutils:
all-tgas: all-libiberty all-bfd all-opcodes
all-time:
+# start-sanitize-ide
+all-vmake: all-tcl all-tk all-itcl all-libide
+# end-sanitize-ide
all-wdiff:
all-target-winsup: all-target-newlib all-target-libiberty all-target-librx all-target-libio configure-target-winsup
configure-target-winsup: configure-target-newlib
# distribution (perhaps it would be better to include it anyway).
DEVO_SUPPORT= README Makefile.in configure configure.in \
config.guess config.sub config move-if-change \
- mpw-README mpw-build.in mpw-config.in mpw-configure \
+ mpw-README mpw-build.in mpw-config.in mpw-configure mpw-install \
COPYING COPYING.LIB install-sh config-ml.in symlink-tree \
mkinstalldirs
# When you use `make setup-dirs' or `make taz' you should always redefine
# this macro.
SUPPORT_FILES = list-of-support-files-for-tool-in-question
-# Files where "byacc" (Cygnus version) should be changed to "bison -y" (FSF).
-DISTBISONFILES= binutils/Makefile.in gas/Makefile.in gdb/Makefile.in
.PHONY: taz
taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) \
texinfo/texinfo.tex texinfo/gpl.texinfo texinfo/lgpl.texinfo
- # Make sure "diststuff" files get built properly.
- for f in $(DISTBISONFILES) ; do \
- if [ -r $$f ]; then \
- sed '/^BISON *=.*$$/s/.*/BISON = bison -y/' <$$f >tmp ; \
- mv -f tmp $$f ; \
- else true; fi ; \
- done
# Take out texinfo from a few places; make simple BISON=bison line.
sed -e '/^all\.normal: /s/\all-texinfo //' \
-e '/^ install-texinfo /d' \
- -e '/^BISON = /,/^$$/d' \
- -e '/^# BISON:/s/.*/BISON = bison -y/' \
+ -e '/^BISON = `if/,/^$$/d' \
+ -e '/^# BISON:/s/.*/BISON = $(DEFAULT_YACC)/' \
<Makefile.in >tmp
mv -f tmp Makefile.in
#
projects / deliverable / binutils-gdb.git / blobdiff