# This is set by the configure script to the list of directories which
# should be built using the target tools.
-TARGET_CONFIGDIRS = libiberty libgloss newlib libio librx libstdc++ libg++ winsup opcodes libstub cygmon
+
+# start-sanitize-dsp
+SPECIAL_LIBS = libdsp
+# end-sanitize-dsp
+
+TARGET_CONFIGDIRS = libiberty libgloss $(SPECIAL_LIBS) newlib libio librx libstdc++ libg++ winsup opcodes libstub cygmon
# Target libraries are put under this directory:
# Changed by configure to $(target_alias) if cross.
$(INSTALL_X11_MODULES) \
$(INSTALL_DOSREL)
-
CC_FOR_TARGET = ` \
if [ -f $$r/gcc/xgcc ] ; then \
if [ -f $$r/$(TARGET_SUBDIR)/newlib/Makefile ] ; then \
fi; \
fi`
+# The first rule in the file had better be this one. Don't put any above it.
+# This lives here to allow makefile fragments to contain dependencies.
+all: all.normal
+.PHONY: all
+
+# These can be overridden by config/mt-*.
+# The _TARGET_ is because they're specified in mt-foo.
+# The _HOST_ is because they're programs that run on the host.
+EXTRA_TARGET_HOST_ALL_MODULES =
+EXTRA_TARGET_HOST_INSTALL_MODULES =
+EXTRA_TARGET_HOST_CHECK_MODULES =
+
#### host and target specific makefile fragments come in here.
###
$(start-sanitize-ide) \
all-vmake \
$(end-sanitize-ide) \
- all-wdiff
+ all-wdiff \
+ $(EXTRA_TARGET_HOST_ALL_MODULES)
# This is a list of the check targets for all of the modules which are
# compiled using $(FLAGS_TO_PASS).
$(start-sanitize-ide) \
check-vmake \
$(end-sanitize-ide) \
- check-wdiff
+ check-wdiff \
+ $(EXTRA_TARGET_HOST_CHECK_MODULES)
CHECK_MODULES=$(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES)
$(start-sanitize-ide) \
install-vmake \
$(end-sanitize-ide) \
- install-wdiff
+ install-wdiff \
+ $(EXTRA_TARGET_HOST_INSTALL_MODULES)
# This is a list of the targets for all of the modules which are compiled
# using $(X11_FLAGS_TO_PASS).
all-target-libg++ \
all-target-newlib \
all-target-winsup \
+ $(start-sanitize-dsp) \
+ all-target-libdsp \
+ $(end-sanitize-dsp) \
all-target-libgloss \
all-target-libiberty \
all-target-gperf \
$(start-sanitize-java) \
all-target-libjava \
all-target-boehm-gc \
+ all-target-qthreads \
$(end-sanitize-java) \
all-target-cygmon
# This is a list of the configure targets for all of the modules which
# are compiled using the target tools.
CONFIGURE_TARGET_MODULES = \
+ $(start-sanitize-dsp) \
+ configure-target-libdsp \
+ $(end-sanitize-dsp) \
configure-target-libio \
configure-target-libstdc++ \
configure-target-librx \
$(start-sanitize-java) \
configure-target-libjava \
configure-target-boehm-gc \
+ configure-target-qthreads \
$(end-sanitize-java) \
configure-target-cygmon
# This is a list of the check targets for all of the modules which are
# compiled using $(TARGET_FLAGS_TO_PASS).
CHECK_TARGET_MODULES = \
+ $(start-sanitize-dsp) \
+ check-target-libdsp \
+ $(end-sanitize-dsp) \
check-target-libio \
check-target-libstdc++ \
check-target-libg++ \
$(start-sanitize-java) \
check-target-libjava \
check-target-boehm-gc \
+ check-target-qthreads \
$(end-sanitize-java) \
check-target-gperf
# This is a list of the install targets for all of the modules which are
# compiled using $(TARGET_FLAGS_TO_PASS).
INSTALL_TARGET_MODULES = \
+ $(start-sanitize-dsp) \
+ install-target-libdsp \
+ $(end-sanitize-dsp) \
install-target-libio \
install-target-libstdc++ \
install-target-libg++ \
$(start-sanitize-java) \
install-target-libjava \
install-target-boehm-gc \
+ install-target-qthreads \
$(end-sanitize-java) \
install-target-gperf
# All of the target modules that can be cleaned
CLEAN_TARGET_MODULES = \
+ $(start-sanitize-dsp) \
+ clean-target-libdsp \
+ $(end-sanitize-dsp) \
clean-target-libio \
clean-target-libstdc++ \
clean-target-librx \
$(start-sanitize-java) \
clean-target-libjava \
clean-target-boehm-gc \
+ clean-target-qthreads \
$(end-sanitize-java) \
clean-target-cygmon
clean-tk \
clean-tix
-# The first rule in the file had better be this one. Don't put any above it.
-all: all.normal
-.PHONY: all
-
# The target built for a native build.
.PHONY: all.normal
all.normal: \
else \
true; \
fi; \
+ date '+%D %r' > builddate \
+ $(INSTALL_DATA) builddate $(datadir)/builddate ; \
done
# end-sanitize-ide
all-apache:
all-ash:
all-autoconf: all-m4 all-texinfo
-all-automake:
+all-automake: all-m4 all-texinfo
all-bash:
all-bfd: all-libiberty all-intl
all-binutils: all-libiberty all-opcodes all-bfd all-flex all-bison all-byacc all-intl
all-jstools: all-tcl all-tk all-tix all-libgui all-libide all-libidetcl
# end-sanitize-ide
all-ld: all-libiberty all-bfd all-opcodes all-bison all-byacc all-flex all-intl
+# start-sanitize-dsp
+all-target-libdsp: configure-target-libdsp configure-target-newlib
+configure-target-libdsp: $(ALL_GCC)
+# end-sanitize-dsp
configure-target-libg++: $(ALL_GCC) configure-target-librx
all-target-libg++: configure-target-libg++ all-gas all-ld all-gcc all-target-libiberty all-target-newlib all-target-libio all-target-librx all-target-libstdc++
configure-target-libgloss: $(ALL_GCC)
all-libidetcl: all-tcl all-tk all-itcl all-ilu all-libgui all-libide
# end-sanitize-ide
# start-sanitize-java
-configure-target-libjava: $(ALL_GCC) configure-target-boehm-gc
-all-target-libjava: configure-target-libjava all-gcc all-target-newlib all-target-boehm-gc
+configure-target-libjava: $(ALL_GCC) configure-target-boehm-gc configure-target-qthreads
+all-target-libjava: configure-target-libjava all-gcc all-target-newlib all-target-boehm-gc all-target-qthreads
# end-sanitize-java
configure-target-librx: $(ALL_GCC) configure-target-newlib
all-target-librx: configure-target-librx
all-patch: all-libiberty
all-perl:
all-prms: all-libiberty
+# start-sanitize-java
+all-target-qthreads: configure-target-qthreads
+# end-sanitize-java
all-rcs:
all-readline:
all-recode: all-libiberty
mkdir proto-toplev/texinfo/util && \
ln -s ../../../texinfo/util/tex3patch proto-toplev/texinfo/util ; \
else true; fi
- chmod og=u `find . -print`
+ chmod -R og=u . || chmod og=u `find . -print`
if grep AM_INIT_AUTOMAKE $(TOOL)/configure.in >/dev/null 2>&1; then \
ver=`sed < $(TOOL)/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'`; \
else \