# This is set by the configure script to the list of directories which
# should be built using the target tools.
-TARGET_CONFIGDIRS = libiberty libgloss newlib libio librx libstdc++ libg++ winsup opcodes cygmon
+
+# start-sanitize-dsp
+SPECIAL_LIBS = libdsp
+# end-sanitize-dsp
+
+TARGET_CONFIGDIRS = libiberty libgloss $(SPECIAL_LIBS) newlib libio librx libstdc++ libg++ winsup opcodes libstub cygmon
# Target libraries are put under this directory:
# Changed by configure to $(target_alias) if cross.
$(INSTALL_X11_MODULES) \
$(INSTALL_DOSREL)
-
CC_FOR_TARGET = ` \
if [ -f $$r/gcc/xgcc ] ; then \
if [ -f $$r/$(TARGET_SUBDIR)/newlib/Makefile ] ; then \
fi; \
fi`
+# The first rule in the file had better be this one. Don't put any above it.
+# This lives here to allow makefile fragments to contain dependencies.
+all: all.normal
+.PHONY: all
+
+# These can be overridden by config/mt-*.
+# The _TARGET_ is because they're specified in mt-foo.
+# The _HOST_ is because they're programs that run on the host.
+EXTRA_TARGET_HOST_ALL_MODULES =
+EXTRA_TARGET_HOST_INSTALL_MODULES =
+EXTRA_TARGET_HOST_CHECK_MODULES =
+
#### host and target specific makefile fragments come in here.
###
'RANLIB=$$(RANLIB_FOR_TARGET)' \
'WINDRES=$$(WINDRES_FOR_TARGET)' \
"GCC_FOR_TARGET=$(GCC_FOR_TARGET)" \
- "`if test x'$(LANGUAGES)' != x; then echo 'LANGUAGES=$(LANGUAGES)'; else echo 'XFOO=bar'; fi`" \
- "`if test x'$(STMP_FIXPROTO)' != x; then echo 'STMP_FIXPROTO=$(STMP_FIXPROTO)'; else echo 'XFOO=bar'; fi`" \
- "`if test x'$(LIMITS_H_TEST)' != x; then echo 'LIMITS_H_TEST=$(LIMITS_H_TEST)'; else echo 'XFOO=bar'; fi`" \
- "`if test x'$(LIBGCC1_TEST)' != x; then echo 'LIBGCC1_TEST=$(LIBGCC1_TEST)'; else echo 'XFOO=bar'; fi`" \
- "`if test x'$(LIBGCC2_CFLAGS)' != x; then echo 'LIBGCC2_CFLAGS=$(LIBGCC2_CFLAGS)'; else echo 'XFOO=bar'; fi`" \
- "`if test x'$(LIBGCC2_DEBUG_CFLAGS)' != x; then echo 'LIBGCC2_DEBUG_CFLAGS=$(LIBGCC2_DEBUG_CFLAGS)'; else echo 'XFOO=bar'; fi`" \
- "`if test x'$(LIBGCC2_INCLUDES)' != x; then echo 'LIBGCC2_INCLUDES=$(LIBGCC2_INCLUDES)'; else echo 'XFOO=bar'; fi`" \
- "`if test x'$(ENQUIRE)' != x; then echo 'ENQUIRE=$(ENQUIRE)'; else echo 'XFOO=bar'; fi`" \
- "`if test x'$(BOOT_CFLAGS)' != x; then echo 'BOOT_CFLAGS=$(BOOT_CFLAGS)'; else echo 'XFOO=bar'; fi`"
+ "`echo 'LANGUAGES=$(LANGUAGES)' | sed -e s/.*=$$/XFOO=/`" \
+ "`echo 'STMP_FIXPROTO=$(STMP_FIXPROTO)' | sed -e s/.*=$$/XFOO=/`" \
+ "`echo 'LIMITS_H_TEST=$(LIMITS_H_TEST)' | sed -e s/.*=$$/XFOO=/`" \
+ "`echo 'LIBGCC1_TEST=$(LIBGCC1_TEST)' | sed -e s/.*=$$/XFOO=/`" \
+ "`echo 'LIBGCC2_CFLAGS=$(LIBGCC2_CFLAGS)' | sed -e s/.*=$$/XFOO=/`" \
+ "`echo 'LIBGCC2_DEBUG_CFLAGS=$(LIBGCC2_DEBUG_CFLAGS)' | sed -e s/.*=$$/XFOO=/`" \
+ "`echo 'LIBGCC2_INCLUDES=$(LIBGCC2_INCLUDES)' | sed -e s/.*=$$/XFOO=/`" \
+ "`echo 'ENQUIRE=$(ENQUIRE)' | sed -e s/.*=$$/XFOO=/`" \
+ "`echo 'BOOT_CFLAGS=$(BOOT_CFLAGS)' | sed -e s/.*=$$/XFOO=/`"
GCC_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_GCC_FLAGS)
# using $(FLAGS_TO_PASS).
ALL_MODULES = \
all-apache \
+ all-ash \
all-autoconf \
all-automake \
all-bash \
all-binutils \
all-bison \
all-byacc \
+ $(start-sanitize-cygnus) \
+ all-cgen \
+ $(end-sanitize-cygnus) \
all-cvssrc \
all-db \
all-dejagnu \
all-findutils \
all-find \
all-flex \
+ $(start-sanitize-cygnus) \
+ all-flexlm \
+ $(end-sanitize-cygnus) \
all-gas \
all-gawk \
all-gettext \
all-libide \
all-libidetcl \
$(end-sanitize-ide) \
+ all-libtool \
all-m4 \
all-make \
all-mmalloc \
all-send-pr \
all-shellutils \
all-sim \
+ $(start-sanitize-cygnus) \
all-snavigator \
+ $(end-sanitize-cygnus) \
all-tar \
all-tcl \
all-texinfo \
$(start-sanitize-ide) \
all-vmake \
$(end-sanitize-ide) \
- all-wdiff
+ all-wdiff \
+ $(EXTRA_TARGET_HOST_ALL_MODULES)
# This is a list of the check targets for all of the modules which are
# compiled using $(FLAGS_TO_PASS).
CROSS_CHECK_MODULES = \
check-apache \
+ check-ash \
check-autoconf \
check-automake \
check-bash \
check-fileutils \
check-findutils \
check-find \
+ $(start-sanitize-cygnus) \
+ check-flexlm \
+ $(end-sanitize-cygnus) \
check-gas \
check-gawk \
check-gettext \
check-libide \
check-libidetcl \
$(end-sanitize-ide) \
+ check-libtool \
check-m4 \
check-make \
check-mmcheckoc \
check-sed \
check-send-pr \
check-shellutils \
+ $(start-sanitize-cygnus) \
check-snavigator \
+ $(end-sanitize-cygnus) \
check-sim \
check-tar \
check-tcl \
$(start-sanitize-ide) \
check-vmake \
$(end-sanitize-ide) \
- check-wdiff
+ check-wdiff \
+ $(EXTRA_TARGET_HOST_CHECK_MODULES)
CHECK_MODULES=$(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES)
# program on installation which uses the Tcl libraries.
INSTALL_MODULES = \
install-apache \
+ install-ash \
install-autoconf \
install-automake \
install-bash \
install-findutils \
install-find \
install-flex \
+ $(start-sanitize-cygnus) \
+ install-flexlm \
+ $(end-sanitize-cygnus) \
install-gas \
install-gawk \
install-gettext \
install-libide \
install-libidetcl \
$(end-sanitize-ide) \
+ install-libtool \
install-m4 \
install-make \
install-mmalloc \
install-send-pr \
install-shellutils \
install-sim \
+ $(start-sanitize-cygnus) \
install-snavigator \
+ $(end-sanitize-cygnus) \
install-tar \
install-texinfo \
install-textutils \
$(start-sanitize-ide) \
install-vmake \
$(end-sanitize-ide) \
- install-wdiff
+ install-wdiff \
+ $(EXTRA_TARGET_HOST_INSTALL_MODULES)
# This is a list of the targets for all of the modules which are compiled
# using $(X11_FLAGS_TO_PASS).
all-target-libg++ \
all-target-newlib \
all-target-winsup \
+ $(start-sanitize-dsp) \
+ all-target-libdsp \
+ $(end-sanitize-dsp) \
all-target-libgloss \
all-target-libiberty \
all-target-gperf \
all-target-examples \
+ all-target-libstub \
+ $(start-sanitize-java) \
+ all-target-libjava \
+ all-target-boehm-gc \
+ all-target-qthreads \
+ $(end-sanitize-java) \
all-target-cygmon
# This is a list of the configure targets for all of the modules which
# are compiled using the target tools.
CONFIGURE_TARGET_MODULES = \
+ $(start-sanitize-dsp) \
+ configure-target-libdsp \
+ $(end-sanitize-dsp) \
configure-target-libio \
configure-target-libstdc++ \
configure-target-librx \
configure-target-libiberty \
configure-target-gperf \
configure-target-examples \
+ configure-target-libstub \
+ $(start-sanitize-java) \
+ configure-target-libjava \
+ configure-target-boehm-gc \
+ configure-target-qthreads \
+ $(end-sanitize-java) \
configure-target-cygmon
# This is a list of the check targets for all of the modules which are
# compiled using $(TARGET_FLAGS_TO_PASS).
CHECK_TARGET_MODULES = \
+ $(start-sanitize-dsp) \
+ check-target-libdsp \
+ $(end-sanitize-dsp) \
check-target-libio \
check-target-libstdc++ \
check-target-libg++ \
check-target-newlib \
check-target-winsup \
check-target-libiberty \
+ $(start-sanitize-java) \
+ check-target-libjava \
+ check-target-boehm-gc \
+ check-target-qthreads \
+ $(end-sanitize-java) \
check-target-gperf
# This is a list of the install targets for all of the modules which are
# compiled using $(TARGET_FLAGS_TO_PASS).
INSTALL_TARGET_MODULES = \
+ $(start-sanitize-dsp) \
+ install-target-libdsp \
+ $(end-sanitize-dsp) \
install-target-libio \
install-target-libstdc++ \
install-target-libg++ \
install-target-winsup \
install-target-libgloss \
install-target-libiberty \
+ $(start-sanitize-java) \
+ install-target-libjava \
+ install-target-boehm-gc \
+ install-target-qthreads \
+ $(end-sanitize-java) \
install-target-gperf
# This is a list of the targets for which we can do a clean-{target}.
CLEAN_MODULES = \
clean-apache \
+ clean-ash \
clean-autoconf \
clean-automake \
clean-bash \
clean-binutils \
clean-bison \
clean-byacc \
+ $(start-sanitize-cygnus) \
+ clean-cgen \
+ $(end-sanitize-cygnus) \
clean-cvssrc \
clean-db \
clean-dejagnu \
clean-findutils \
clean-find \
clean-flex \
+ $(start-sanitize-cygnus) \
+ clean-flexlm \
+ $(end-sanitize-cygnus) \
clean-gas \
clean-gawk \
clean-gettext \
clean-libide \
clean-libidetcl \
$(end-sanitize-ide) \
+ clean-libtool \
clean-m4 \
clean-make \
clean-mmalloc \
clean-send-pr \
clean-shellutils \
clean-sim \
+ $(start-sanitize-cygnus) \
clean-snavigator \
+ $(end-sanitize-cygnus) \
clean-tar \
clean-tcl \
clean-texinfo \
# All of the target modules that can be cleaned
CLEAN_TARGET_MODULES = \
+ $(start-sanitize-dsp) \
+ clean-target-libdsp \
+ $(end-sanitize-dsp) \
clean-target-libio \
clean-target-libstdc++ \
clean-target-librx \
clean-target-libiberty \
clean-target-gperf \
clean-target-examples \
+ clean-target-libstub \
+ $(start-sanitize-java) \
+ clean-target-libjava \
+ clean-target-boehm-gc \
+ clean-target-qthreads \
+ $(end-sanitize-java) \
clean-target-cygmon
# All of the x11 modules that can be cleaned
clean-tk \
clean-tix
-# The first rule in the file had better be this one. Don't put any above it.
-all: all.normal
-.PHONY: all
-
# The target built for a native build.
.PHONY: all.normal
all.normal: \
else \
true; \
fi; \
+ date '+%D %r' > builddate \
+ $(INSTALL_DATA) builddate $(datadir)/builddate ; \
done
# end-sanitize-ide
mv $(TARGET_SUBDIR)/$${dir}/tmpmulti.out $(TARGET_SUBDIR)/$${dir}/multilib.out; \
fi; \
else \
+ if echo '.;' | cmp - $(TARGET_SUBDIR)/$${dir}/tmpmulti.out >/dev/null 2>&1; then \
+ true; \
+ else \
+ rm -f $(TARGET_SUBDIR)/$${dir}/Makefile; \
+ fi; \
mv $(TARGET_SUBDIR)/$${dir}/tmpmulti.out $(TARGET_SUBDIR)/$${dir}/multilib.out; \
fi; \
fi; \
# This is a list of inter-dependencies among modules.
all-apache:
+all-ash:
all-autoconf: all-m4 all-texinfo
-all-automake:
+all-automake: all-m4 all-texinfo
all-bash:
-all-bfd:
-all-binutils: all-libiberty all-opcodes all-bfd all-flex all-bison all-byacc
+all-bfd: all-libiberty all-intl
+all-binutils: all-libiberty all-opcodes all-bfd all-flex all-bison all-byacc all-intl
all-bison: all-texinfo
+# start-sanitize-java
+all-target-boehm-gc: configure-target-boehm-gc
+# end-sanitize-java
all-byacc:
+# start-sanitize-cygnus
+all-cgen:
+# These two have dependencies on cgen, and while this section is alphabetically
+# sorted, I wish to keep these together until things settle.
+all-opcodes: all-cgen
+all-sim: all-cgen
+# end-sanitize-cygnus
all-cvssrc:
configure-target-cygmon: $(ALL_GCC)
-all-target-cygmon: configure-target-cygmon all-gas all-ld all-gcc all-target-libiberty all-target-newlib all-target-libio
+all-target-cygmon: configure-target-cygmon all-gas all-ld all-gcc all-target-libiberty all-target-newlib all-target-libio all-target-libstub
all-db:
all-dejagnu: all-tcl all-expect all-tk
all-diff: all-libiberty
all-findutils:
all-find:
all-flex: all-libiberty all-bison all-byacc
-all-gas: all-libiberty all-opcodes all-bfd
+# start-sanitize-cygnus
+all-flexlm:
+# end-sanitize-cygnus
+all-gas: all-libiberty all-opcodes all-bfd all-intl
all-gash: all-tcl
all-gawk:
ALL_GCC = all-gcc
all-gnuserv:
configure-target-gperf: $(ALL_GCC)
all-target-gperf: configure-target-gperf all-target-libiberty all-target-libstdc++
-all-gprof: all-libiberty all-bfd all-opcodes
-all-grep: all-libiberty
+all-gprof: all-libiberty all-bfd all-opcodes all-intl
all-grez: all-libiberty all-bfd all-opcodes
all-gui: all-gdb all-libproc all-target-librx
all-guile:
# start-sanitize-ide
all-jstools: all-tcl all-tk all-tix all-libgui all-libide all-libidetcl
# end-sanitize-ide
-all-ld: all-libiberty all-bfd all-opcodes all-bison all-byacc all-flex
+all-ld: all-libiberty all-bfd all-opcodes all-bison all-byacc all-flex all-intl
+# start-sanitize-dsp
+all-target-libdsp: configure-target-libdsp configure-target-newlib
+configure-target-libdsp: $(ALL_GCC)
+# end-sanitize-dsp
configure-target-libg++: $(ALL_GCC) configure-target-librx
all-target-libg++: configure-target-libg++ all-gas all-ld all-gcc all-target-libiberty all-target-newlib all-target-libio all-target-librx all-target-libstdc++
configure-target-libgloss: $(ALL_GCC)
all-libide: all-ilu
all-libidetcl: all-tcl all-tk all-itcl all-ilu all-libgui all-libide
# end-sanitize-ide
+# start-sanitize-java
+configure-target-libjava: $(ALL_GCC) configure-target-boehm-gc configure-target-qthreads
+all-target-libjava: configure-target-libjava all-gcc all-target-newlib all-target-boehm-gc all-target-qthreads
+# end-sanitize-java
configure-target-librx: $(ALL_GCC) configure-target-newlib
all-target-librx: configure-target-librx
configure-target-libstdc++: $(ALL_GCC)
all-target-libstdc++: configure-target-libstdc++ all-gas all-ld all-gcc all-target-libiberty all-target-newlib all-target-libio
+configure-target-libstub: $(ALL_GCC)
+all-target-libstub: configure-target-libstub
+all-libtool:
all-m4: all-libiberty
all-make: all-libiberty
all-mmalloc:
all-patch: all-libiberty
all-perl:
all-prms: all-libiberty
+# start-sanitize-java
+all-target-qthreads: configure-target-qthreads
+# end-sanitize-java
all-rcs:
all-readline:
all-recode: all-libiberty
all-send-pr: all-prms
all-shellutils:
all-sim: all-libiberty all-bfd all-opcodes all-readline
-all-snavigator: all-tcl all-tk all-tix all-itcl all-db all-grep
+# start-sanitize-cygnus
+all-snavigator: all-tcl all-tk all-tix all-itcl all-db all-grep all-flexlm all-libgui
+# end-sanitize-cygnus
all-tar: all-libiberty
all-tcl:
all-tclX: all-tcl all-tk
all-target: $(ALL_TARGET_MODULES)
install-target: $(INSTALL_TARGET_MODULES)
# start-sanitize-gdbtk
-install-gdbtk: install-tcl install-tk install-itcl install-tix install-libgui install-gdb
+install-gdb: install-tcl install-tk install-itcl install-tix install-libgui
#end-sanitize-gdbtk
### other supporting targets
taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) \
texinfo/texinfo.tex texinfo/gpl.texinfo texinfo/lgpl.texinfo
- # Take out texinfo from a few places; make simple BISON=bison line.
+ # Take out texinfo from a few places.
sed -e '/^all\.normal: /s/\all-texinfo //' \
-e '/^ install-texinfo /d' \
<Makefile.in >tmp
mkdir proto-toplev/texinfo/util && \
ln -s ../../../texinfo/util/tex3patch proto-toplev/texinfo/util ; \
else true; fi
- chmod og=u `find . -print`
+ chmod -R og=u . || chmod og=u `find . -print`
if grep AM_INIT_AUTOMAKE $(TOOL)/configure.in >/dev/null 2>&1; then \
ver=`sed < $(TOOL)/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'`; \
else \
DIST_SUPPORT= $(DEVO_SUPPORT) $(TEXINFO_SUPPORT)
.PHONY: gas.tar.gz
-GAS_SUPPORT_DIRS= bfd include libiberty opcodes setup.com makefile.vms
+GAS_SUPPORT_DIRS= bfd include libiberty opcodes intl setup.com makefile.vms
gas.tar.gz: $(DIST_SUPPORT) $(GAS_SUPPORT_DIRS) gas
$(MAKE) -f Makefile.in taz TOOL=gas \
SUPPORT_FILES="$(GAS_SUPPORT_DIRS)"
# The FSF "binutils" release includes gprof and ld.
.PHONY: binutils.tar.gz
-BINUTILS_SUPPORT_DIRS= bfd gas include libiberty opcodes ld gprof setup.com makefile.vms
+BINUTILS_SUPPORT_DIRS= bfd gas include libiberty opcodes ld gprof intl setup.com makefile.vms
binutils.tar.gz: $(DIST_SUPPORT) $(BINUTILS_SUPPORT_DIRS) binutils
$(MAKE) -f Makefile.in taz TOOL=binutils \
SUPPORT_FILES="$(BINUTILS_SUPPORT_DIRS) makeall.bat configure.bat"
SUPPORT_FILES="$(GNATS_SUPPORT_DIRS)"
.PHONY: gdb.tar.gz
-GDB_SUPPORT_DIRS= bfd include libiberty mmalloc opcodes readline sim utils
+GDB_SUPPORT_DIRS= bfd include libiberty mmalloc opcodes readline sim utils intl
GDBTK_SUPPORT_DIRS= `if [ -d tcl -a -d tk ] ; then echo tcl tk ; fi`
gdb.tar.gz: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
$(MAKE) -f Makefile.in taz TOOL=gdb \