#
# Makefile for directory with subdirs to build.
-# Copyright (C) 1990, 1991 Cygnus Support
+# Copyright (C) 1990, 1991, 1992, 1993 Free Software Foundation
#
# This file is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
#
-# Last Mod Tue Nov 5 23:28:51 PST 1991, by rich@cygnus.com
-#
-# $Id$
srcdir = .
-idestdir = /usr/local
-ddestdir = $(idestdir)
+prefix = /usr/local
+
+exec_prefix = $(prefix)
+bindir = $(exec_prefix)/bin
+libdir = $(exec_prefix)/lib
+tooldir = $(libdir)
+
+program_transform_name =
+
+datadir = $(prefix)/lib
+mandir = $(prefix)/man
+man1dir = $(mandir)/man1
+man2dir = $(mandir)/man2
+man3dir = $(mandir)/man3
+man4dir = $(mandir)/man4
+man5dir = $(mandir)/man5
+man6dir = $(mandir)/man6
+man7dir = $(mandir)/man7
+man8dir = $(mandir)/man8
+man9dir = $(mandir)/man9
+infodir = $(prefix)/info
+includedir = $(prefix)/include
+docdir = $(datadir)/doc
+
+SHELL = /bin/sh
+
+INSTALL = cp
+INSTALL_PROGRAM = $(INSTALL)
+INSTALL_DATA = $(INSTALL)
+
+AS = as
+AR = ar
+AR_FLAGS = rc
+CC = cc
+CFLAGS = -g
+# start-sanitize-chill
+CHILLFLAGS = $(CFLAGS)
+CHILL_LIB = -lchill
+# end-sanitize-chill
+CXX = gcc
+CXXFLAGS = -g -O
+RANLIB = ranlib
+NM = nm
+GZIP = gzip
-SHELL=/bin/sh
+# BISON: This line sed'ed to BISON = bison -y for FSF releases, don't remove.
+BISON = `if [ -f $${rootme}/byacc/byacc ] ; \
+ then echo $${rootme}/byacc/byacc ; \
+ else echo byacc ; \
+ fi`
+
+LEX = `if [ -f $${rootme}/flex/flex ] ; \
+ then echo $${rootme}/flex/flex ; \
+ else echo flex ; fi`
+
+MAKEINFO = `if [ -f $${rootme}/texinfo/makeinfo/makeinfo ] ; \
+ then echo $${rootme}/texinfo/makeinfo/makeinfo ; \
+ else echo makeinfo ; fi`
-RANLIB = ranlib
-AR = ar
-AR_FLAGS = cq
-BISON = `if [ -d $(unsubdir)/../bison ] ; \
- then echo \`pwd\`/$(unsubdir)/../bison$(subdir)/bison -L \`pwd\`/$(unsubdir)/../bison$(subdir)/ ; \
- else echo yacc ; fi`
+# libraries that may need to be augmented on a system-by-system basis
+X11_LIB = -lX11
-#\`(cd $(srcdir)/bison ; \\`pwd\\`)\`
-SUBDIRS = libiberty readline bfd gdb binutils ld gas gcc gnulib clib
+# compilers to use to create programs which must be run in the build
+# environment.
+CC_FOR_BUILD = $(CC)
+CXX_FOR_BUILD = $(CXX)
+
+SUBDIRS = "this is set via configure, don't edit this"
OTHERS =
ALL = all.normal
-INSTALL_HEADERS = install-headers
-INSTALL_FIXED_INCLUDES = install-fixed-includes
+INSTALL_TARGET = install.all
+
+CC_FOR_TARGET = ` \
+ if [ -f $${rootme}/gcc/Makefile ] ; then \
+ echo $${rootme}/gcc/xgcc -B$${rootme}/gcc/; \
+ else \
+ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+ echo $(CC); \
+ else \
+ t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
+ fi; \
+ fi`
+
+# start-sanitize-chill
+CHILL_FOR_TARGET = ` \
+ if [ -f $${rootme}/gcc/Makefile ] ; then \
+ echo $${rootme}/gcc/xgcc -B$${rootme}/gcc/ -L$${rootme}/chillrt/; \
+ else \
+ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+ echo $(CC); \
+ else \
+ t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
+ fi; \
+ fi`
+
+# end-sanitize-chill
+
+CXX_FOR_TARGET = ` \
+ if [ -f $${rootme}/gcc/Makefile ] ; then \
+ echo $${rootme}/gcc/xgcc -B$${rootme}/gcc/; \
+ else \
+ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+ echo $(CXX); \
+ else \
+ t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
+ fi; \
+ fi`
+
+AS_FOR_TARGET = ` \
+ if [ -f $${rootme}/gas/Makefile ] ; then \
+ echo $${rootme}/gas/as.new ; \
+ else \
+ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+ echo $(AS); \
+ else \
+ t='$(program_transform_name)'; echo as | sed -e '' $$t ; \
+ fi; \
+ fi`
+
+AR_FOR_TARGET = ` \
+ if [ -f $${rootme}/binutils/Makefile ] ; then \
+ echo $${rootme}/binutils/ar ; \
+ else \
+ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+ echo $(AR); \
+ else \
+ t='$(program_transform_name)'; echo ar | sed -e '' $$t ; \
+ fi; \
+ fi`
+
+RANLIB_FOR_TARGET = ` \
+ if [ -f $${rootme}/binutils/Makefile ] ; then \
+ echo $${rootme}/binutils/ranlib ; \
+ else \
+ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+ echo $(RANLIB); \
+ else \
+ t='$(program_transform_name)'; echo ranlib | sed -e '' $$t ; \
+ fi; \
+ fi`
+
+NM_FOR_TARGET = ` \
+ if [ -f $${rootme}/binutils/Makefile ] ; then \
+ echo $${rootme}/binutils/nm ; \
+ else \
+ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+ echo $(NM); \
+ else \
+ t='$(program_transform_name)'; echo nm | sed -e '' $$t ; \
+ fi; \
+ fi`
+
+# FIXME: This is badly named.
+XTRAFLAGS = ` \
+ if [ -f $${rootme}/gcc/Makefile ] ; then \
+ if [ -f $${rootme}/newlib/Makefile ] ; then \
+ echo -I$${rootme}/newlib/targ-include -I$${srcroot}/newlib/libc/include -I$${rootme}/gcc/include -nostdinc ; \
+ else \
+ echo -I$${rootme}/gcc/include ; \
+ fi ; \
+ else \
+ echo ; \
+ fi`
+
+PRMS = install-prms
+
#### host and target specific makefile fragments come in here.
###
-all: $(ALL)
+# Flags to pass down to all sub-makes.
+# Please keep these in alphabetical order.
+BASE_FLAGS_TO_PASS = \
+ "AR_FLAGS=$(AR_FLAGS)" \
+ "AR_FOR_TARGET=$(AR_FOR_TARGET)" \
+ "AS_FOR_TARGET=$(AS_FOR_TARGET)" \
+ "BISON=$(BISON)" \
+ "CC_FOR_BUILD=$(CC_FOR_BUILD)" \
+ "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
+ "CFLAGS=$(CFLAGS)" \
+ $(start-sanitize-chill)\
+ "CHILLFLAGS=$(CHILLFLAGS)" \
+ "CHILL_FOR_TARGET=$(CHILL_FOR_TARGET)" \
+ "CHILL_LIB=$(CHILL_LIB)" \
+ $(end-sanitize-chill)\
+ "CXX_FOR_BUILD=$(CXX_FOR_BUILD)" \
+ "CXXFLAGS=$(CXXFLAGS)" \
+ "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
+ 'GCC_FOR_TARGET=$$(CC_FOR_TARGET)' \
+ "INSTALL=$(INSTALL)" \
+ "INSTALL_DATA=$(INSTALL_DATA)" \
+ "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
+ "LDFLAGS=$(LDFLAGS)" \
+ "LEX=$(LEX)" \
+ "LOADLIBES=$(LOADLIBES)" \
+ "MAKEINFO=$(MAKEINFO)" \
+ "NM_FOR_TARGET=$(NM_FOR_TARGET)" \
+ "PRMS=$(PRMS)" \
+ "RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
+ "XTRAFLAGS_FOR_TARGET=$(XTRAFLAGS)" \
+ "exec_prefix=$(exec_prefix)" \
+ "prefix=$(prefix)" \
+ "tooldir=$(tooldir)"
+
+# Flags to pass down to most sub-makes, in which we're building with
+# the host environment.
+# If any variables are added here, they must be added to do-*, below.
+EXTRA_HOST_FLAGS = \
+ 'AR=$(AR)' \
+ 'AS=$(AS)' \
+ 'CC=$(CC)' \
+ 'CXX=$(CXX)' \
+ 'NM=$(NM)' \
+ 'RANLIB=$(RANLIB)' \
+ 'XTRAFLAGS='
+
+FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_HOST_FLAGS)
+
+# Flags that are concerned with the location of the X11 include files
+# and library files
+X11_FLAGS_TO_PASS = \
+ "X11_INCLUDE_FLAGS=$(X11_INCLUDE_FLAGS)" \
+ "X11_LIB_FLAGS=$(X11_LIB_FLAGS)" \
+ "X11_LIB=$(X11_LIB)"
+
+# Flags to pass down to makes which are built with the target environment.
+# The double $ decreases the length of the command line; the variables
+# are set in BASE_FLAGS_TO_PASS, and the sub-make will expand them.
+# If any variables are added here, they must be added to do-*, below.
+EXTRA_TARGET_FLAGS = \
+ 'AR=$$(AR_FOR_TARGET)' \
+ 'AS=$$(AS_FOR_TARGET)' \
+ 'CC=$$(CC_FOR_TARGET)' \
+ 'CXX=$$(CXX_FOR_TARGET)' \
+ 'NM=$$(NM_FOR_TARGET)' \
+ 'RANLIB=$$(RANLIB_FOR_TARGET)' \
+ 'XTRAFLAGS=$$(XTRAFLAGS_FOR_TARGET)'
+
+TARGET_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_TARGET_FLAGS)
+
+# Flags to pass down to gcc. gcc builds a library, libgcc.a, so it
+# unfortunately needs the native compiler and the target ar and
+# ranlib.
+# If any variables are added here, they must be added to do-*, below.
+EXTRA_GCC_FLAGS = \
+ 'AR=$$(AR_FOR_TARGET)' \
+ 'AS=$(AS)' \
+ 'CC=$(CC)' \
+ 'CXX=$(CXX)' \
+ 'NM=$(NM)' \
+ 'RANLIB=$$(RANLIB_FOR_TARGET)' \
+ 'XTRAFLAGS='
+
+GCC_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_GCC_FLAGS)
+
+# This is a list of the targets for all the modules which are compiled
+# using $(FLAGS_TO_PASS).
+ALL_MODULES = \
+ all-autoconf \
+ all-bfd \
+ all-binutils \
+ all-byacc \
+ all-cvs \
+ all-dejagnu \
+ all-diff \
+ all-etc \
+ all-fileutils \
+ all-find \
+ all-flex \
+ all-gas \
+ all-gawk \
+ all-gdb \
+ all-gprof \
+ all-grep \
+ all-gzip \
+ all-hello \
+ all-indent \
+ all-ispell \
+ all-ld \
+ all-libiberty \
+ all-m4 \
+ all-make \
+ all-mmalloc \
+ all-opcodes \
+ all-patch \
+ all-prms \
+ all-rcs \
+ all-readline \
+ all-recode \
+ all-sed \
+ all-send-pr \
+ all-shellutils \
+ all-sim \
+ all-tar \
+ all-tcl \
+ all-texinfo \
+ all-textutils \
+ all-tgas \
+ all-time \
+ all-uudecode \
+ all-wdiff
+
+# This is a list of the install targets for all the modules which are
+# compiled using $(FLAGS_TO_PASS).
+INSTALL_MODULES = \
+ install-autoconf \
+ install-bfd \
+ install-binutils \
+ install-byacc \
+ install-cvs \
+ install-dejagnu \
+ install-diff \
+ install-etc \
+ install-fileutils \
+ install-find \
+ install-flex \
+ install-gas \
+ install-gawk \
+ install-gdb \
+ install-glob \
+ install-gprof \
+ install-grep \
+ install-gzip \
+ install-hello \
+ install-indent \
+ install-ispell \
+ install-ld \
+ install-libiberty \
+ install-m4 \
+ install-make \
+ install-mmalloc \
+ install-opcodes \
+ install-patch \
+ install-prms \
+ install-rcs \
+ install-readline \
+ install-recode \
+ install-sed \
+ install-send-pr \
+ install-shellutils \
+ install-sim \
+ install-tar \
+ install-tcl \
+ install-texinfo \
+ install-textutils \
+ install-tgas \
+ install-time \
+ install-uudecode \
+ install-wdiff
+
+# This is a list of the targets for all the modules which are compiled
+# using $(X11_FLAGS_TO_PASS).
+ALL_X11_MODULES = \
+ all-emacs \
+ all-expect \
+ all-tclX \
+ all-tk
+
+# This is a list of the install targets for all the modules which are
+# compiled using $(X11_FLAGS_TO_PASS).
+INSTALL_X11_MODULES = \
+ install-emacs \
+ install-expect \
+ install-tclX \
+ install-tk
+
+# This is a list of the targets for all the modules which are compiled
+# using $(TARGET_FLAGS_TO_PASS).
+ALL_TARGET_MODULES = \
+ $(start-sanitize-chill) \
+ all-chillrt \
+ $(end-sanitize-chill) \
+ all-libg++ \
+ all-newlib \
+ all-xiberty
+
+# This is a list of the install targets for all the modules which are
+# compiled using $(TARGET_FLAGS_TO_PASS).
+INSTALL_TARGET_MODULES = \
+ $(start-sanitize-chill) \
+ install-chillrt \
+ $(end-sanitize-chill) \
+ install-libg++ \
+ install-newlib \
+ install-xiberty
+
+# This is a shell case of all modules which are compiled using
+# $(TARGET_FLAGS_TO_PASS), used in the do-X rule.
+TARGET_LIBS = libg++ | newlib | xiberty
+# start-sanitize-chill
+TARGET_LIBS = chillrt | libg++ | newlib | xiberty
+# end-sanitize-chill
+
+# The first rule in the file had better be this one. Don't put any above it.
+all: $(ALL)
+.PHONY: all
+
+# The target built for a native build.
+.PHONY: all.normal
+all.normal: \
+ $(ALL_MODULES) \
+ $(ALL_TARGET_MODULES) \
+ $(ALL_X11_MODULES)
+ all-gcc
+
+# The target built for a cross build.
+.PHONY: all.cross
+all.cross: \
+ all-bfd \
+ all-binutils \
+ all-byacc \
+ all-dejagnu \
+ all-flex \
+ all-gas \
+ all-gcc \
+ all-gdb \
+ all-ld \
+ all-libiberty \
+ all-mmalloc \
+ all-opcodes \
+ all-readline \
+ all-sim \
+ $(ALL_TARGET_MODULES)
+
+# Do a target for all the subdirectories. A ``make do-X'' will do a
+# ``make X'' in all subdirectories (because, in general, there is a
+# dependency (below) of X upon do-X, a ``make X'' will also do this,
+# but it may do additional work as well).
+# This target ensures that $(BASE_FLAGS_TO_PASS) appears only once,
+# because it is so large that it can easily overflow the command line
+# length limit on some systems.
+DO_X = \
+ do-check \
+ do-clean \
+ do-distclean \
+ do-dvi \
+ do-info \
+ do-install-info \
+ do-installcheck \
+ do-mostlyclean \
+ do-realclean
+.PHONY: $(DO_X)
+$(DO_X):
+ @target=`echo $@ | sed -e 's/^do-//'`; \
+ rootme=`pwd`; export rootme; \
+ srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ for i in $(SUBDIRS); do \
+ if [ -f ./$$i/Makefile ]; then \
+ case $$i in \
+ $(TARGET_LIBS) ) \
+ for flag in $(EXTRA_TARGET_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
+ done; \
+ ;; \
+ gcc) \
+ for flag in $(EXTRA_GCC_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
+ done; \
+ ;; \
+ *) \
+ for flag in $(EXTRA_HOST_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
+ done; \
+ ;; \
+ esac ; \
+ export AR AS CC CXX NM RANLIB XTRAFLAGS; \
+ if (cd ./$$i; \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" "XTRAFLAGS=$${XTRAFLAGS}" \
+ $${target}); \
+ then true; else exit 1; fi; \
+ else true; fi; \
+ done
+
+# Here are the targets which correspond to the do-X targets.
+
+.PHONY: info check installcheck dvi install-info
+.PHONY: clean distclean mostlyclean realclean local-clean local-distclean
+info: do-info
+check: do-check
+installcheck: do-installcheck
+dvi: do-dvi
+
+install-info: install-info-dirs do-install-info dir.info
+ if [ -f dir.info ] ; then \
+ $(INSTALL_DATA) dir.info $(infodir)/dir.info ; \
+ else true ; fi
+
+do-install-info: install-info-dirs
-all.normal:
- $(MAKE) subdir_do DO=all "DODIRS=$(SUBDIRS) $(OTHERS)"
+local-clean:
+ -rm -f *.a TEMP errs core *.o *~ \#* TAGS *.E
-# this is a bad hack.
-all.xclib: all.normal
- if [ -d clib ] ; then \
- (cd clib ; $(MAKE)) ; \
+local-distclean:
+ -rm -f Makefile config.status
+
+clean: do-clean local-clean
+mostlyclean: do-mostlyclean local-clean
+distclean: do-distclean local-clean local-distclean
+realclean: do-realclean local-clean local-distclean
+
+# Installation targets.
+
+.PHONY: install uninstall
+install: $(INSTALL_TARGET)
+
+uninstall:
+ @echo "the uninstall target is not supported in this tree"
+
+.PHONY: install.all
+install.all: install-no-fixedincludes
+ @if [ -f ./gcc/Makefile ] ; then \
+ rootme=`pwd` ; export rootme ; \
+ (cd ./gcc; \
+ $(MAKE) $(FLAGS_TO_PASS) install-headers) ; \
+ else \
+ true ; \
fi
-subdir_do: force
- for i in $(DODIRS); do \
- if [ -f $(unsubdir)/$$i/localenv ] ; then \
- if (cd $(unsubdir)/$$i$(subdir); \
- $(MAKE) \
- "against=$(against)" \
- "BISON=$(BISON)" $(DO)) ; then true ; \
- else exit 1 ; fi ; \
- else if [ -d $(unsubdir)/$$i ] ; then \
- if (cd $(unsubdir)/$$i$(subdir); \
- $(MAKE) \
- "against=$(against)" \
- "AR=$(AR)" \
- "CC=$(CC)" \
- "AR_FLAGS=$(AR_FLAGS)" \
- "RANLIB=$(RANLIB)" \
- "LOADLIBES=$(LOADLIBES)" \
- "LDFLAGS=$(LDFLAGS)" \
- "BISON=$(BISON)" $(DO)) ; then true ; \
- else exit 1 ; fi ; \
- else true ; fi ; \
- fi ; \
- done
+# install-no-fixedincludes is used because Cygnus can not distributed
+# the fixed header files.
+.PHONY: install-no-fixedincludes
+install-no-fixedincludes: \
+ install-dirs \
+ gcc-no-fixedincludes \
+ $(INSTALL_MODULES) \
+ $(INSTALL_TARGET_MODULES) \
+ $(INSTALL_X11_MODULES)
+
+# Install the gcc headers files, but not the fixed include files,
+# which Cygnus is not allowed to distribute. This rule is very
+# dependent on the workings of the gcc Makefile.in.
+.PHONY: gcc-no-fixedincludes
+gcc-no-fixedincludes:
+ @if [ -f ./gcc/Makefile ]; then \
+ rm -rf gcc/tmp-include; \
+ mv gcc/include gcc/tmp-include 2>/dev/null; \
+ mkdir gcc/include; \
+ touch gcc/stmp-fixincludes; \
+ rm -f gcc/stmp-headers; \
+ rootme=`pwd`; export rootme; \
+ srcroot=`cd $(srcdir); pwd` ; export srcroot; \
+ (cd ./gcc; \
+ $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
+ rm -rf gcc/include; \
+ mv gcc/tmp-include gcc/include 2>/dev/null; \
+ else true; fi
+
+.PHONY: install.cross
+install.cross: \
+ install-dirs \
+ install-binutils \
+ install-byacc \
+ install-dejagnu \
+ install-etc \
+ install-flex \
+ install-gas \
+ install-gcc \
+ install-gdb \
+ install-glob \
+ install-ld \
+ install-libiberty \
+ install-mmalloc \
+ install-opcodes \
+ install-readline \
+ $(INSTALL_TARGET_MODULES)
+
+# This rule is used to build the modules which use FLAGS_TO_PASS. To
+# build a target all-X means to cd to X and make all.
+# all-glob is handled specially because it doesn't actually build.
+.PHONY: $(ALL_MODULES) all-glob
+$(ALL_MODULES) all-glob:
+ @dir=`echo $@ | sed -e 's/all-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ rootme=`pwd`; export rootme; \
+ srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) all); \
+ else \
+ true; \
+ fi
+
+# This rule is used to install the modules which use FLAGS_TO_PASS.
+# To build a target install-X means to cd to X and make install.
+.PHONY: $(INSTALL_MODULES)
+$(INSTALL_MODULES): install-dirs
+ @dir=`echo $@ | sed -e 's/install-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ rootme=`pwd`; export rootme; \
+ srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) install); \
+ else \
+ true; \
+ fi
+
+# This rule is used the build the modules which use
+# TARGET_FLAGS_TO_PASS. To build a target all-X means to cd to X and
+# make all.
+.PHONY: $(ALL_TARGET_MODULES)
+$(ALL_TARGET_MODULES):
+ @dir=`echo $@ | sed -e 's/all-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ rootme=`pwd`; export rootme; \
+ srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ (cd $${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
+ else \
+ true; \
+ fi
+
+# This rule is used to install the modules which use
+# TARGET_FLAGS_TO_PASS. To build a target install-X means to cd to X
+# and make install.
+.PHONY: $(INSTALL_TARGET_MODULES)
+$(INSTALL_TARGET_MODULES): install-dirs
+ @dir=`echo $@ | sed -e 's/install-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ rootme=`pwd`; export rootme; \
+ srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ (cd $${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
+ else \
+ true; \
+ fi
+# This rule is used the build the modules which use X11_FLAGS_TO_PASS.
+# To build a target all-X means to cd to X and make all.
+.PHONY: $(ALL_X11_MODULES)
+$(ALL_X11_MODULES):
+ @dir=`echo $@ | sed -e 's/all-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ rootme=`pwd`; export rootme; \
+ srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ (cd $${dir}; \
+ $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) all); \
+ else \
+ true; \
+ fi
+# This rule is used the install the modules which use X11_FLAGS_TO_PASS.
+# To build a target install-X means to cd to X and make install.
+.PHONY: $(INSTALL_X11_MODULES)
+$(INSTALL_X11_MODULES):
+ @dir=`echo $@ | sed -e 's/all-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ rootme=`pwd`; export rootme; \
+ srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ (cd $${dir}; \
+ $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) install); \
+ else \
+ true; \
+ fi
-bootstrap:
- $(MAKE) all
- $(MAKE) stage1
- $(MAKE) pass "stagepass=stage1"
- $(MAKE) stage2
- $(MAKE) pass "stagepass=stage2"
- $(MAKE) comparison
-
-bootstrap2:
- $(MAKE) pass "stagepass=stage1"
- $(MAKE) stage2
- $(MAKE) pass "stagepass=stage2"
- $(MAKE) comparison
-
-bootstrap3:
- $(MAKE) pass "stagepass=stage2"
- $(MAKE) comparison
-
-pass:
- cp $(srcdir)/gcc/gstdarg.h $(unsubdir)/gas$(subdir)/stdarg.h
- $(MAKE) subdir_do DO=all "DODIRS=$(SUBDIRS)" \
- "CC=`pwd`/$(unsubdir)/gcc$(subdir)/$(stagepass)/gcc \
- -O \
- -B`pwd`/$(unsubdir)/gcc$(subdir)/$(stagepass)/ \
- -B`pwd`/$(unsubdir)/gas$(subdir)/$(stagepass)/ \
- -B`pwd`/$(unsubdir)/ld$(subdir)/$(stagepass)/" \
- "AR=`pwd`/$(unsubdir)/binutil$(subdir)/$(stagepass)/ar" \
- "RANLIB=`pwd`/$(unsubdir)/binutils$(subdir)/$(stagepass)/ranlib" \
- "LOADLIBES=`pwd`/$(unsubdir)/gnulib$(subdir)/$(stagepass)/gnulib.a /lib/libc.a" \
- "LDFLAGS=-nostdlib /lib/crt0.o \
- -L`pwd`/$(unsubdir)/gnulib$(subdir)/$(stagepass)/ \
- -B`pwd`/$(unsubdir)/ld$(subdir)/$(stagepass)/"
-
-
-stage1:
- $(MAKE) subdir_do DO=stage1 "DODIRS=$(SUBDIRS)"
-
-stage2:
- $(MAKE) subdir_do DO=stage2 "DODIRS=$(SUBDIRS)"
-
-stage3:
- $(MAKE) subdir_do DO=stage3 "DODIRS=$(SUBDIRS)"
-
-stage4:
- $(MAKE) subdir_do DO=stage4 "DODIRS=$(SUBDIRS)"
-
-against=stage2
-
-comparison:; $(MAKE) subdir_do DO=comparison against=$(against) "DODIRS=$(SUBDIRS)"
-
-de-stage1:; $(MAKE) subdir_do DO=de-stage1 "DODIRS=$(SUBDIRS)"
-de-stage2:; $(MAKE) subdir_do DO=de-stage2 "DODIRS=$(SUBDIRS)"
-de-stage3:; $(MAKE) subdir_do DO=de-stage3 "DODIRS=$(SUBDIRS)"
-de-stage4:; $(MAKE) subdir_do DO=de-stage4 "DODIRS=$(SUBDIRS)"
-
-clean:
- rm -rf *.a TEMP errs core *.o *~ \#* TAGS *.E
- $(MAKE) subdir_do DO=clean "DODIRS=$(SUBDIRS) $(OTHERS)"
-
-install: install-dirs $(INSTALL_FIXED_INCLUDES)
- $(MAKE) subdir_do DO=install "DODIRS=$(SUBDIRS) $(OTHERS)"
-
-# The "else true" stuff is for Ultrix; the shell returns the exit code
-# of the "if" command, if no commands are run in the "then" or "else" part,
-# causing Make to quit.
-install-dirs: force $(INSTALL_HEADERS)
- - mkdir $(ddestdir)
- - mkdir $(ddestdir)/include
- - mkdir $(ddestdir)/lib
- - mkdir $(ddestdir)/lib/emacs
- - mkdir $(ddestdir)/bin
- - mkdir $(ddestdir)/lib
- - mkdir $(ddestdir)
- - mkdir $(ddestdir)/bin
- - mkdir $(ddestdir)/lib
- - mkdir $(idestdir)
- - mkdir $(idestdir)include
- - mkdir $(idestdir)/doc
- - mkdir $(idestdir)/man
- - mkdir $(idestdir)/man/man1
- - mkdir $(idestdir)/man/man2
- - mkdir $(idestdir)/man/man3
- - mkdir $(idestdir)/man/man4
- - mkdir $(idestdir)/man/man5
- - mkdir $(idestdir)/man/man6
- - mkdir $(idestdir)/man/man7
- - mkdir $(idestdir)/man/man8
-
-install-headers:
- if [ -d $(unsubdir)/gcc$(subdir) ] ; then \
- (cd $(unsubdir)/gcc$(subdir) ; \
- $(MAKE) install-dir) ; \
- else true; \
+# gcc is the only module which uses GCC_FLAGS_TO_PASS.
+.PHONY: all-gcc
+all-gcc:
+ @if [ -f ./gcc/Makefile ] ; then \
+ rootme=`pwd`; export rootme; \
+ srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) all); \
+ else \
+ true; \
fi
-install-fixed-includes: force
- if [ -d $(unsubdir)/gcc$(subdir) ] ; then \
- (cd $(unsubdir)/gcc$(subdir) ; \
- $(MAKE) install-fixed-includes) ; \
- else true; \
+.PHONY: install-gcc
+install-gcc:
+ @if [ -f ./gcc/Makefile ] ; then \
+ rootme=`pwd`; export rootme; \
+ srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
+ else \
+ true; \
fi
+# This is a list of inter-dependencies among modules.
+all-autoconf:
+all-bfd:
+all-binutils: all-libiberty all-opcodes all-bfd all-flex
+all-byacc:
+# start-sanitize-chill
+all-chillrt: all-binutils all-gas all-gcc all-newlib
+# end-sanitize-chill
+all-cvs:
+all-dejagnu:
+all-diff: all-libiberty
+all-emacs:
+all-etc:
+all-expect: all-tcl
+all-fileutils:
+all-find:
+all-flex: all-libiberty
+all-gas: all-libiberty all-opcodes all-bfd
+all-gawk:
+all-gcc: all-libiberty all-byacc all-binutils all-gas
+all-gdb: all-libiberty all-opcodes all-bfd all-mmalloc all-readline all-glob all-byacc
+all-glob:
+all-gprof: all-libiberty all-bfd
+all-grep:
+all-gzip: all-libiberty
+all-hello: all-libiberty
+all-indent:
+all-ispell: all-emacs
+all-ld: all-libiberty all-bfd all-byacc all-flex
+all-libg++: all-gas all-ld all-gcc all-xiberty all-newlib
+all-libiberty:
+all-m4: all-libiberty
+all-make: all-libiberty
+all-mmalloc:
+all-newlib: all-binutils all-gas all-gcc
+all-opcodes:
+all-patch:
+all-prms:
+all-rcs:
+all-readline:
+all-recode: all-libiberty
+all-sed:
+all-send-pr:
+all-shellutils:
+all-sim: all-libiberty all-bfd
+all-tar: all-libiberty
+all-tcl:
+all-tclX: all-tcl all-tk
+all-tk: all-tcl
+all-texinfo: all-libiberty
+all-textutils:
+all-tgas: all-libiberty all-bfd
+all-time:
+all-wdiff:
+all-uudecode: all-libiberty
+all-xiberty: all-gcc all-newlib
+
+### other supporting targets
+
+MAKEDIRS= \
+ $(prefix) \
+ $(exec_prefix) \
+ $(tooldir)
+
+.PHONY: install-dirs
+install-dirs:
+ @for i in $(MAKEDIRS) ; do \
+ echo Making $$i... ; \
+ parent=`echo $$i|sed -e 's@/[^/]*$$@@'`; \
+ if [ -d $$parent ] ; then true ; else mkdir $$parent ; fi ; \
+ if [ ! -d $$i ] ; then \
+ if mkdir $$i ; then \
+ true ; \
+ else \
+ exit 1 ; \
+ fi ; \
+ else \
+ true ; \
+ fi ; \
+ done
+
+.PHONY: install-info-dirs
+install-info-dirs:
+ if [ -d $(prefix) ] ; then true ; else mkdir $(prefix) ; fi
+ -parent=`echo $(infodir)|sed -e 's@/[^/]*$$@@'`; \
+ if [ -d $$parent ] ; then true ; else mkdir $$parent ; fi
+ -if [ -d $(infodir) ] ; then true ; else mkdir $(infodir) ; fi
+
+dir.info: do-install-info
+ if [ -f $(srcdir)/texinfo/gen-info-dir ] ; then \
+ $(srcdir)/texinfo/gen-info-dir $(infodir) $(srcdir)/texinfo/dir.info-template > dir.info.new ; \
+ mv -f dir.info.new dir.info ; \
+ else true ; \
+ fi
+
+dist:
+ @echo "Building a full distribution of this tree isn't done"
+ @echo "via 'make dist'. Check out the etc/ subdirectory"
+
etags tags: TAGS
-TAGS: FORCE
+TAGS:
etags `$(MAKE) ls`
ls:
done) \
done
-force:
-
# with the gnu make, this is done automatically.
Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag)
#
# Build GDB distributions that contain BFD, Include, Libiberty, Readline, etc
-DEVO_SUPPORT= README README.configure Makefile.in configure configure.in \
- config.sub config
-GDB_SUPPORT_DIRS= bfd include libiberty readline
-GDB_SUPPORT_FILES= $(GDB_SUPPORT_DIRS) texinfo/fsf/texinfo.tex
+DEVO_SUPPORT= README Makefile.in configure configure.in \
+ config.guess config.sub config move-if-change
+ETC_SUPPORT= Makefile.in cfg-paper.texi configure.in configure.man \
+ configure.texi
+GDB_SUPPORT_DIRS= bfd include libiberty mmalloc opcodes readline glob sim
+GDB_SUPPORT_FILES= $(GDB_SUPPORT_DIRS)
-setup-dirs: force_update
+.PHONY: setup-dirs-gdb gdb.tar.Z make-gdb.tar.Z
+setup-dirs-gdb:
./configure sun4
- make clean
+ $(MAKE) clean
./configure -rm sun4
- chmod og=u `find $(DEVO_SUPPORT) $(GDB_SUPPORT_FILES) -print`
-
-bfd.ilrt.tar.Z: setup-dirs
- rm -f bfd.ilrt.tar.Z
- tar cf - $(DEVO_SUPPORT) $(GDB_SUPPORT_FILES) \
- | compress -v >bfd.ilrt.tar.Z
+ chmod og=u `find etc $(DEVO_SUPPORT) $(GDB_SUPPORT_FILES) -print`
-gdb.tar.Z: setup-dirs
- (cd gdb; $(MAKE) -f Makefile.in make-proto-gdb.dir)
+gdb.tar.Z: setup-dirs-gdb
+ (cd gdb; $(MAKE) -f Makefile.in make-proto-gdb.dir BISON="byacc")
$(MAKE) $(MFLAGS) -f Makefile.in make-gdb.tar.Z
-make-gdb.tar.Z: $(DEVO_SUPPORT) $(GDB_SUPPORT_DIRS) gdb texinfo/fsf/texinfo.tex
+make-gdb.tar.Z: $(DEVO_SUPPORT) $(GDB_SUPPORT_DIRS) gdb texinfo/texinfo.tex
rm -rf proto-toplev; mkdir proto-toplev
ln -s ../gdb/proto-gdb.dir proto-toplev/gdb
(cd proto-toplev; for i in $(DEVO_SUPPORT) $(GDB_SUPPORT_DIRS); do \
ln -s ../$$i . ; \
done)
+ mkdir proto-toplev/etc
+ (cd proto-toplev/etc; for i in $(ETC_SUPPORT); do \
+ ln -s ../../etc/$$i . ; \
+ done)
+ # Put only one copy (four hard links) of COPYING in the tar file.
+ rm proto-toplev/bfd/COPYING
+ ln proto-toplev/gdb/COPYING proto-toplev/bfd/COPYING
+ rm proto-toplev/include/COPYING
+ ln proto-toplev/gdb/COPYING proto-toplev/include/COPYING
+ rm proto-toplev/readline/COPYING
+ ln proto-toplev/gdb/COPYING proto-toplev/readline/COPYING
+
+ # Take out texinfo and glob from configurable dirs
+ rm proto-toplev/configure.in
+ sed -e '/^host_tools=/s/texinfo //' \
+ -e '/^host_libs=/s/glob //' \
+ <configure.in >proto-toplev/configure.in
+
+ # Take out texinfo from a few places; make simple BISON=bison line.
+ rm proto-toplev/Makefile.in
+ sed -e '/^all\.normal: /s/\all-texinfo //' \
+ -e '/^ install-texinfo /d' \
+ -e '/^BISON = /,/^$$/d' \
+ -e '/^# BISON:/s/.*/BISON = bison -y/' \
+ <Makefile.in >proto-toplev/Makefile.in
+
mkdir proto-toplev/texinfo
- mkdir proto-toplev/texinfo/fsf
- ln -s ../../../texinfo/fsf/texinfo.tex proto-toplev/texinfo/fsf/
+ ln -s ../../texinfo/texinfo.tex proto-toplev/texinfo/
+ ln -s ../../texinfo/tex3patch proto-toplev/texinfo/
chmod og=u `find proto-toplev -print`
(VER=`sed <gdb/Makefile.in -n 's/VERSION = //p'`; \
echo "==> Making gdb-$$VER.tar.Z"; \
ln -s proto-toplev gdb-$$VER; \
tar cfh - gdb-$$VER \
| compress -v >gdb-$$VER.tar.Z)
+ $(GZIP) -d <gdb-$$VER.tar.Z | $(GZIP) -9 -v >gdb-$$VER.tar.z
+
+# When you use `make setup-dirs' or `make taz' you should always redefine
+# this macro.
+SUPPORT_FILES = list-of-support-files-for-tool-in-question
+# Directories that might want `make proto-dir' run.
+PROTODIRS= gdb
+
+.PHONY: setup-dirs taz
+setup-dirs:
+ ./configure sun4
+ $(MAKE) clean
+ ./configure -rm sun4
+ chmod og=u `find etc $(DEVO_SUPPORT) $(SUPPORT_FILES) -print`
+ for d in .. $(PROTODIRS) ; do \
+ if [ $$d != ".." ] && [ -d $$d ]; then \
+ (cd $$d ; $(MAKE) -f Makefile.in proto-dir) ; \
+ else true ; fi ; \
+ done
+
+taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
+ rm -rf proto-toplev; mkdir proto-toplev
+ for d in .. $(PROTODIRS) ; do \
+ if [ $$d != .. ]; then \
+ if [ -d $$d ]; then \
+ ln -s ../$$d/proto-$$d.dir proto-toplev/$$d ; \
+ else true ; fi ; \
+ else true ; fi ; \
+ done
+ (cd proto-toplev; for i in $(TOOL) $(DEVO_SUPPORT) $(SUPPORT_FILES); do \
+ if [ ! -d $$i ]; then ln -s ../$$i . ; else true ; fi ; \
+ done)
+ mkdir proto-toplev/etc
+ (cd proto-toplev/etc; for i in $(ETC_SUPPORT); do \
+ ln -s ../../etc/$$i . ; \
+ done)
+ # Put only one copy (four hard links) of COPYING in the tar file.
+ ## FIX ME LATER
+
+ # Take out texinfo and glob from configurable dirs
+ rm proto-toplev/configure.in
+ sed -e '/^host_tools=/s/texinfo //' \
+ -e '/^host_libs=/s/glob //' \
+ <configure.in >proto-toplev/configure.in
+
+ # Take out texinfo from a few places; make simple BISON=bison line.
+ rm proto-toplev/Makefile.in
+ sed -e '/^all\.normal: /s/\all-texinfo //' \
+ -e '/^ install-texinfo /d' \
+ -e '/^BISON = /,/^$$/d' \
+ -e '/^# BISON:/s/.*/BISON = bison -y/' \
+ <Makefile.in >proto-toplev/Makefile.in
+
+ mkdir proto-toplev/texinfo
+ ln -s ../../texinfo/texinfo.tex proto-toplev/texinfo/
+ ln -s ../../texinfo/tex3patch proto-toplev/texinfo/
+ chmod og=u `find proto-toplev -print`
+ (VER=`sed <$(TOOL)/Makefile.in -n 's/VERSION *= *//p'`; \
+ echo "==> Making $(TOOL)-$$VER.tar.z"; \
+ ln -s proto-toplev $(TOOL)-$$VER; \
+ tar cfh - $(TOOL)-$$VER \
+ | $(GZIP) -v >$(TOOL)-$$VER.tar.z)
+
+GAS_SUPPORT_DIRS= bfd include libiberty opcodes
+
+.PHONY: gas.tar.z
+gas.tar.z: $(DEVO_SUPPORT) $(GAS_SUPPORT_DIRS) gas texinfo/texinfo.tex
+ $(MAKE) -f Makefile.in setup-dirs SUPPORT_FILES="$(GAS_SUPPORT_DIRS)"
+ $(MAKE) -f Makefile.in taz SUPPORT_FILES="$(GAS_SUPPORT_DIRS)" TOOL=gas
+
-force_update:
+.NOEXPORT:
+MAKEOVERRIDES=
-nothing:
+# start-sanitize-chill
+## This is ugly, but I don't want GNU make to put these variables in
+## the environment. Older makes will see this as a set of targets
+## with no dependencies and no actions.
+unexport CHILLFLAGS CHILL_LIB CHILL_FOR_TARGET :
+# end-sanitize-chill
# end of Makefile.in