# Should be substed by configure.in
FLAGS_FOR_TARGET = @FLAGS_FOR_TARGET@
CC_FOR_TARGET = @CC_FOR_TARGET@
-BASE_CC_FOR_TARGET = @BASE_CC_FOR_TARGET@
CXX_FOR_TARGET = @CXX_FOR_TARGET@
RAW_CXX_FOR_TARGET = @RAW_CXX_FOR_TARGET@
CXX_FOR_TARGET_FOR_RECURSIVE_MAKE = @CXX_FOR_TARGET_FOR_RECURSIVE_MAKE@
GCC_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_GCC_FLAGS)
-# This is a list of the configure targets for all of the modules which
-# are compiled using the target tools.
-CONFIGURE_TARGET_MODULES =[+
- FOR target_modules +] \
- configure-target-[+module+][+
- ENDFOR target_modules +]
-
-configure-target: $(CONFIGURE_TARGET_MODULES)
+configure-host: @configure_host_modules@
+configure-target: @configure_target_modules@
# This is a list of the targets for which we can do a clean-{target}.
CLEAN_MODULES =[+
@all_host_modules@ \
@all_target_modules@
+all-host: @all_host_modules@
all-target: @all_target_modules@
# Do a target for all the subdirectories. A ``make do-X'' will do a
# Modules which run on the host machine
# --------------------------------------
[+ FOR host_modules +]
+.PHONY: configure-[+module+] maybe-configure-[+module+]
+maybe-configure-[+module+]:
+configure-[+module+]: [+module+]/Makefile
+
+[+module+]/Makefile: config.status
+ @[ -d [+module+] ] || mkdir [+module+]; \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ CC="$(CC)"; export CC; \
+ CFLAGS="$(CFLAGS)"; export CFLAGS; \
+ CXX="$(CXX)"; export CXX; \
+ CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \
+ if [ z$(build_canonical) != z$(host_canoncial) ] ; then \
+ AR="$(AR)"; export AR; \
+ AS="$(AS)"; export AS; \
+ CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \
+ DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \
+ LD="$(LD)"; export LD; \
+ NM="$(NM)"; export NM; \
+ RANLIB="$(RANLIB)"; export RANLIB; \
+ WINDRES="$(WINDRES)"; export WINDRES; \
+ OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \
+ OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \
+ fi; \
+ echo Configuring in [+module+]; \
+ cd [+module+] || exit 1; \
+ case $(srcdir) in \
+ \.) \
+ srcdiroption="--srcdir=."; \
+ libsrcdir=".";; \
+ /* | [A-Za-z]:[\\/]*) \
+ srcdiroption="--srcdir=$(srcdir)/[+module+]"; \
+ libsrcdir="$$s/[+module+]";; \
+ *) \
+ srcdiroption="--srcdir=../$(srcdir)/[+module+]"; \
+ libsrcdir="$$s/[+module+]";; \
+ esac; \
+ $(SHELL) $${libsrcdir}/configure \
+ $(HOST_CONFIGARGS) $${srcdiroption} \
+ || exit 1
+
.PHONY: all-[+module+] maybe-all-[+module+]
maybe-all-[+module+]:
-all-[+module+]:
+all-[+module+]: configure-[+module+]
@r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
maybe-configure-target-[+module+]:
configure-target-[+module+]: $(TARGET_SUBDIR)/[+module+]/Makefile
-$(TARGET_SUBDIR)/[+module+]/multilib.out: $(BASE_CC_FOR_TARGET)
+# Don't manually override CC_FOR_TARGET at make time; get it set right
+# at configure time. Otherwise multilibs may be wrong.
+$(TARGET_SUBDIR)/[+module+]/multilib.out: maybe-all-gcc
@[ -d $(TARGET_SUBDIR)/[+module+] ] || mkdir $(TARGET_SUBDIR)/[+module+];\
r=`${PWD}`; export r; \
echo "Configuring multilibs for [+module+]"; \
# build modules. So GCC is a sort of hybrid.
# gcc is the only module which uses GCC_FLAGS_TO_PASS.
+.PHONY: configure-gcc maybe-configure-gcc
+maybe-configure-gcc:
+configure-gcc: gcc/Makefile
+
+gcc/Makefile: config.status
+ @[ -d gcc ] || mkdir gcc; \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ CC="$(CC)"; export CC; \
+ CFLAGS="$(CFLAGS)"; export CFLAGS; \
+ CXX="$(CXX)"; export CXX; \
+ CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \
+ if [ z$(build_canonical) != z$(host_canoncial) ] ; then \
+ AR="$(AR)"; export AR; \
+ AS="$(AS)"; export AS; \
+ CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \
+ DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \
+ LD="$(LD)"; export LD; \
+ NM="$(NM)"; export NM; \
+ RANLIB="$(RANLIB)"; export RANLIB; \
+ WINDRES="$(WINDRES)"; export WINDRES; \
+ OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \
+ OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \
+ fi; \
+ echo Configuring in gcc; \
+ cd gcc || exit 1; \
+ case $(srcdir) in \
+ \.) \
+ srcdiroption="--srcdir=."; \
+ libsrcdir=".";; \
+ /* | [A-Za-z]:[\\/]*) \
+ srcdiroption="--srcdir=$(srcdir)/gcc"; \
+ libsrcdir="$$s/gcc";; \
+ *) \
+ srcdiroption="--srcdir=../$(srcdir)/gcc"; \
+ libsrcdir="$$s/gcc";; \
+ esac; \
+ $(SHELL) $${libsrcdir}/configure \
+ $(HOST_CONFIGARGS) $${srcdiroption} \
+ || exit 1
+
+# Don't remake gcc if it's already been made by 'bootstrap'; that causes
+# nothing but trouble. This wart will be fixed eventually by moving
+# the bootstrap behavior to this file.
.PHONY: all-gcc maybe-all-gcc
maybe-all-gcc:
-all-gcc:
- @if [ -f ./gcc/Makefile ] ; then \
+all-gcc: configure-gcc
+ @if [ -f gcc/xgcc ] ; then \
+ exit 0 ; \
+ else \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
(cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) all); \
- else \
- true; \
fi
# Building GCC uses some tools for rebuilding "source" files
# in parallel.
#
.PHONY: bootstrap bootstrap-lean bootstrap2 bootstrap2-lean bootstrap3 bootstrap3-lean bootstrap4 bootstrap4-lean bubblestrap quickstrap cleanstrap restrap
-bootstrap bootstrap-lean bootstrap2 bootstrap2-lean bootstrap3 bootstrap3-lean bootstrap4 bootstrap4-lean bubblestrap quickstrap cleanstrap restrap: all-bootstrap
+bootstrap bootstrap-lean bootstrap2 bootstrap2-lean bootstrap3 bootstrap3-lean bootstrap4 bootstrap4-lean bubblestrap quickstrap cleanstrap restrap: all-bootstrap configure-gcc
@r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
# it's safer to use a soft dependency.
# Host modules specific to gcc.
+# GCC needs to identify certain tools.
+gcc/Makefile: maybe-configure-binutils maybe-configure-gas maybe-configure-ld maybe-configure-bison maybe-configure-flex
all-gcc: maybe-all-libiberty maybe-all-bison maybe-all-byacc maybe-all-binutils maybe-all-gas maybe-all-ld maybe-all-zlib
# This is a slightly kludgy method of getting dependencies on
# all-build-libiberty correct; it would be better to build it every time.
all-bootstrap: maybe-all-libiberty maybe-all-texinfo maybe-all-bison maybe-all-byacc maybe-all-binutils maybe-all-gas maybe-all-ld maybe-all-zlib
# Host modules specific to gdb.
+# GDB needs to know that the simulator is being built.
+gdb/Makefile: maybe-configure-tcl maybe-configure-tk maybe-configure-sim
GDB_TK = @GDB_TK@
all-gdb: maybe-all-libiberty maybe-all-opcodes maybe-all-bfd maybe-all-mmalloc maybe-all-readline maybe-all-bison maybe-all-byacc maybe-all-sim $(gdbnlmrequirements) $(GDB_TK)
install-gdb: maybe-install-tcl maybe-install-tk maybe-install-itcl maybe-install-tix maybe-install-libgui
+libgui/Makefile: maybe-configure-tcl maybe-configure-tk
all-libgui: maybe-all-tcl maybe-all-tk maybe-all-itcl
# Host modules specific to binutils.
+bfd/Makefile: configure-libiberty
all-bfd: maybe-all-libiberty maybe-all-intl
all-binutils: maybe-all-libiberty maybe-all-opcodes maybe-all-bfd maybe-all-flex maybe-all-bison maybe-all-byacc maybe-all-intl
# We put install-opcodes before install-binutils because the installed
# Other host modules in the 'src' repository.
all-dejagnu: maybe-all-tcl maybe-all-expect maybe-all-tk
+expect/Makefile: maybe-configure-tcl maybe-configure-tk
all-expect: maybe-all-tcl maybe-all-tk
+itcl/Makefile: maybe-configure-tcl maybe-configure-tk
all-itcl: maybe-all-tcl maybe-all-tk
# We put install-tcl before install-itcl because itcl wants to run a
# program on installation which uses the Tcl libraries.
all-sid: maybe-all-tcl maybe-all-tk
install-sid: maybe-install-tcl maybe-install-tk
all-sim: maybe-all-libiberty maybe-all-bfd maybe-all-opcodes maybe-all-readline
+tk/Makefile: maybe-configure-tcl
all-tk: maybe-all-tcl
+tix/Makefile: maybe-configure-tcl maybe-configure-tk
all-tix: maybe-all-tcl maybe-all-tk
all-texinfo: maybe-all-libiberty
# all-gcc only depends on all-gas if gas is present and being configured.
@maybe_dependencies@
+# Serialization dependencies. Host configures don't work well in parallel to
+# each other, due to contention over config.cache. Target configures and
+# build configures are similar.
+@serialization_dependencies@
+
# --------------------------------
# Regenerating top level configury
# --------------------------------