BUILD_CONFIGDIRS = libiberty
BUILD_SUBDIR = @build_subdir@
-# This is set by the configure script to the arguments to use when configuring
-# directories built for the target.
-TARGET_CONFIGARGS = @target_configargs@
-
# This is set by the configure script to the arguments to use when configuring
# directories built for the build system.
BUILD_CONFIGARGS = @build_configargs@
+# This is set by the configure script to the arguments to use when configuring
+# directories built for the host system.
+HOST_CONFIGARGS = @host_configargs@
+
+# This is set by the configure script to the arguments to use when configuring
+# directories built for the target.
+TARGET_CONFIGARGS = @target_configargs@
+
# This is set by configure to REALLY_SET_LIB_PATH if --enable-shared
# was used.
SET_LIB_PATH = @SET_LIB_PATH@
# Should be substed by configure.in
FLAGS_FOR_TARGET = @FLAGS_FOR_TARGET@
CC_FOR_TARGET = @CC_FOR_TARGET@
+BASE_CC_FOR_TARGET = @BASE_CC_FOR_TARGET@
CXX_FOR_TARGET = @CXX_FOR_TARGET@
RAW_CXX_FOR_TARGET = @RAW_CXX_FOR_TARGET@
CXX_FOR_TARGET_FOR_RECURSIVE_MAKE = @CXX_FOR_TARGET_FOR_RECURSIVE_MAKE@
# Installation targets.
-.PHONY: install uninstall source-vault binary-vault vault-install
+.PHONY: install uninstall
install: installdirs @install_host_modules@ @install_target_modules@
install-target: @install_target_modules@
uninstall:
@echo "the uninstall target is not supported in this tree"
-source-vault:
- $(MAKE) -f ./release/Build-A-Release \
- host=$(host_alias) source-vault
-
-binary-vault:
- $(MAKE) -f ./release/Build-A-Release \
- host=$(host_alias) target=$(target_alias)
-
-vault-install:
- @if [ -f ./release/vault-install ] ; then \
- ./release/vault-install $(host_alias) $(target_alias) ; \
- else \
- true ; \
- fi
-
.PHONY: install.all
install.all: install-no-fixedincludes
@if [ -f ./gcc/Makefile ] ; then \
install-no-fixedincludes: installdirs @install_host_modules_nogcc@ \
@install_target_modules@ gcc-no-fixedincludes
-# Install the gcc headers files, but not the fixed include files,
-# which Cygnus is not allowed to distribute. This rule is very
-# dependent on the workings of the gcc Makefile.in.
-.PHONY: gcc-no-fixedincludes
-gcc-no-fixedincludes:
- @if [ -f ./gcc/Makefile ]; then \
- rm -rf gcc/tmp-include; \
- mv gcc/include gcc/tmp-include 2>/dev/null; \
- mkdir gcc/include; \
- cp $(srcdir)/gcc/gsyslimits.h gcc/include/syslimits.h; \
- touch gcc/stmp-fixinc gcc/include/fixed; \
- rm -f gcc/stmp-headers gcc/stmp-int-hdrs; \
- r=`${PWD}`; export r; \
- s=`cd $(srcdir); ${PWD}` ; export s; \
- $(SET_LIB_PATH) \
- (cd ./gcc; \
- $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
- rm -rf gcc/include; \
- mv gcc/tmp-include gcc/include 2>/dev/null; \
- else true; fi
+### other supporting targets
-# These rules are used to build the modules which are built with the
-# build machine's native compiler.
-[+ FOR build_modules +]
-.PHONY: all-build-[+module+] maybe-all-build-[+module+]
-maybe-all-build-[+module+]:
-all-build-[+module+]:
- @if [ -f ./[+module+]/Makefile ] ; then \
- r=`${PWD}`; export r; \
- s=`cd $(srcdir); ${PWD}`; export s; \
- (cd $(BUILD_SUBDIR)/[+module+] && $(MAKE) all); \
- else \
- true; \
+MAKEDIRS= \
+ $(DESTDIR)$(prefix) \
+ $(DESTDIR)$(exec_prefix)
+.PHONY: installdirs
+installdirs: mkinstalldirs
+ $(SHELL) $(srcdir)/mkinstalldirs $(MAKEDIRS)
+
+dir.info: do-install-info
+ if [ -f $(srcdir)/texinfo/gen-info-dir ] ; then \
+ $(srcdir)/texinfo/gen-info-dir $(infodir) $(srcdir)/texinfo/dir.info-template > dir.info.new ; \
+ mv -f dir.info.new dir.info ; \
+ else true ; \
fi
+dist:
+ @echo "Building a full distribution of this tree isn't done"
+ @echo "via 'make dist'. Check out the etc/ subdirectory"
+
+etags tags: TAGS
+
+# Right now this just builds TAGS in each subdirectory. emacs19 has the
+# ability to use several tags files at once, so there is probably no need
+# to combine them into one big TAGS file (like CVS 1.3 does). We could
+# (if we felt like it) have this Makefile write a piece of elisp which
+# the user could load to tell emacs19 where all the TAGS files we just
+# built are.
+TAGS: do-TAGS
+
+
+# --------------------------------------
+# Modules which run on the build machine
+# --------------------------------------
+[+ FOR build_modules +]
.PHONY: configure-build-[+module+] maybe-configure-build-[+module+]
maybe-configure-build-[+module+]:
-configure-build-[+module+]:
- @if [ ! -d $(BUILD_SUBDIR) ]; then \
- true; \
- elif [ -f $(BUILD_SUBDIR)/[+module+]/Makefile ] ; then \
- true; \
- elif echo " $(BUILD_CONFIGDIRS) " | grep " [+module+] " >/dev/null 2>&1; then \
- if [ -d $(srcdir)/[+module+] ]; then \
- [ -d $(BUILD_SUBDIR)/[+module+] ] || mkdir $(BUILD_SUBDIR)/[+module+];\
+configure-build-[+module+]: $(BUILD_SUBDIR)/[+module+]/Makefile
+$(BUILD_SUBDIR)/[+module+]/Makefile: config.status
+ @[ -d $(BUILD_SUBDIR)/[+module+] ] || mkdir $(BUILD_SUBDIR)/[+module+];\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
AR="$(AR_FOR_BUILD)"; export AR; \
CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
$(BUILD_CONFIGARGS) $${srcdiroption} \
--with-build-subdir="$(BUILD_SUBDIR)" \
- || exit 1; \
- else \
- true; \
- fi; \
- else \
- true; \
- fi
+ || exit 1
+
+.PHONY: all-build-[+module+] maybe-all-build-[+module+]
+maybe-all-build-[+module+]:
+all-build-[+module+]: configure-build-[+module+]
+ @r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ (cd $(BUILD_SUBDIR)/[+module+] && $(MAKE) all)
[+ ENDFOR build_modules +]
-# These rules are used to build the modules which use FLAGS_TO_PASS. To
-# build a target all-X means to cd to X and make all.
+# --------------------------------------
+# Modules which run on the host machine
+# --------------------------------------
[+ FOR host_modules +]
.PHONY: all-[+module+] maybe-all-[+module+]
maybe-all-[+module+]:
[+ ENDIF no_install +]
[+ ENDFOR host_modules +]
-# These rules are used to build the modules which are built with the target
-# tools. To make foo-X means to cd to X and make foo.
+# ---------------------------------------
+# Modules which run on the target machine
+# ---------------------------------------
[+ FOR target_modules +]
.PHONY: configure-target-[+module+] maybe-configure-target-[+module+]
maybe-configure-target-[+module+]:
-configure-target-[+module+]:
- @r=`${PWD}`; export r; \
- $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/[+module+]/tmpmulti.out 2> /dev/null; \
- if [ -s $(TARGET_SUBDIR)/[+module+]/tmpmulti.out ]; then \
- if [ -f $(TARGET_SUBDIR)/[+module+]/multilib.out ]; then \
- if cmp $(TARGET_SUBDIR)/[+module+]/multilib.out $(TARGET_SUBDIR)/[+module+]/tmpmulti.out > /dev/null; then \
- rm -f $(TARGET_SUBDIR)/[+module+]/tmpmulti.out; \
- else \
- echo "Multilibs changed for [+module+], reconfiguring"; \
- rm -f $(TARGET_SUBDIR)/[+module+]/multilib.out $(TARGET_SUBDIR)/[+module+]/Makefile; \
- mv $(TARGET_SUBDIR)/[+module+]/tmpmulti.out $(TARGET_SUBDIR)/[+module+]/multilib.out; \
- fi; \
- else \
- mv $(TARGET_SUBDIR)/[+module+]/tmpmulti.out $(TARGET_SUBDIR)/[+module+]/multilib.out; \
- fi; \
- fi; exit 0 # break command into two pieces
- @if [ -d $(srcdir)/[+module+] ]; then \
- [ -d $(TARGET_SUBDIR)/[+module+] ] || mkdir $(TARGET_SUBDIR)/[+module+];\
+configure-target-[+module+]: $(TARGET_SUBDIR)/[+module+]/Makefile
+
+$(TARGET_SUBDIR)/[+module+]/multilib.out: $(BASE_CC_FOR_TARGET)
+ @[ -d $(TARGET_SUBDIR)/[+module+] ] || mkdir $(TARGET_SUBDIR)/[+module+];\
+ r=`${PWD}`; export r; \
+ echo "Configuring multilibs for [+module+]"; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/[+module+]/multilib.out 2> /dev/null
+
+$(TARGET_SUBDIR)/[+module+]/Makefile: config.status $(TARGET_SUBDIR)/[+module+]/multilib.out
+ @[ -d $(TARGET_SUBDIR)/[+module+] ] || mkdir $(TARGET_SUBDIR)/[+module+];\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
$(TARGET_CONFIGARGS) $${srcdiroption} \
--with-target-subdir="$(TARGET_SUBDIR)" \
- || exit 1; \
- else \
- true; \
- fi
+ || exit 1
.PHONY: all-target-[+module+] maybe-all-target-[+module+]
maybe-all-target-[+module+]:
-all-target-[+module+]:
+all-target-[+module+]: configure-target-[+module+]
@r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
[+ ENDIF no_install +]
[+ ENDFOR target_modules +]
+# ----------
+# GCC module
+# ----------
+
+# Unfortunately, while gcc _should_ be a host module,
+# libgcc is a target module, and gen* programs are
+# build modules. So GCC is a sort of hybrid.
+
# gcc is the only module which uses GCC_FLAGS_TO_PASS.
.PHONY: all-gcc maybe-all-gcc
maybe-all-gcc:
true; \
fi
-ALL_GCC = maybe-all-gcc
-ALL_GCC_C = $(ALL_GCC) maybe-all-target-newlib maybe-all-target-libgloss
-ALL_GCC_CXX = $(ALL_GCC_C) maybe-all-target-libstdc++-v3
+# Install the gcc headers files, but not the fixed include files,
+# which Cygnus is not allowed to distribute. This rule is very
+# dependent on the workings of the gcc Makefile.in.
+.PHONY: gcc-no-fixedincludes
+gcc-no-fixedincludes:
+ @if [ -f ./gcc/Makefile ]; then \
+ rm -rf gcc/tmp-include; \
+ mv gcc/include gcc/tmp-include 2>/dev/null; \
+ mkdir gcc/include; \
+ cp $(srcdir)/gcc/gsyslimits.h gcc/include/syslimits.h; \
+ touch gcc/stmp-fixinc gcc/include/fixed; \
+ rm -f gcc/stmp-headers gcc/stmp-int-hdrs; \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}` ; export s; \
+ $(SET_LIB_PATH) \
+ (cd ./gcc; \
+ $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
+ rm -rf gcc/include; \
+ mv gcc/tmp-include gcc/include 2>/dev/null; \
+ else true; fi
-# This is a list of inter-dependencies among modules.
-all-autoconf: maybe-all-m4 maybe-all-texinfo
-all-automake: maybe-all-m4 maybe-all-texinfo
+# --------------------------------------
+# Dependencies between different modules
+# --------------------------------------
+
+# There are two types of dependencies here: 'hard' dependencies, where one
+# module simply won't build without the other; and 'soft' dependencies, where
+# if the depended-on module is missing, the depending module will do without
+# or find a substitute somewhere (perhaps installed). Soft dependencies
+# are specified by depending on a 'maybe-' target. If you're not sure,
+# it's safer to use a soft dependency.
+
+# Host modules specific to gcc.
+all-gcc: maybe-all-libiberty maybe-all-bison maybe-all-byacc maybe-all-binutils maybe-all-gas maybe-all-ld maybe-all-zlib
+# This is a slightly kludgy method of getting dependencies on
+# all-build-libiberty correct; it would be better to build it every time.
+all-gcc: maybe-all-build-libiberty
+all-bootstrap: maybe-all-libiberty maybe-all-texinfo maybe-all-bison maybe-all-byacc maybe-all-binutils maybe-all-gas maybe-all-ld maybe-all-zlib
+
+# Host modules specific to gdb.
+GDB_TK = @GDB_TK@
+all-gdb: maybe-all-libiberty maybe-all-opcodes maybe-all-bfd maybe-all-mmalloc maybe-all-readline maybe-all-bison maybe-all-byacc maybe-all-sim $(gdbnlmrequirements) $(GDB_TK)
+install-gdb: maybe-install-tcl maybe-install-tk maybe-install-itcl maybe-install-tix maybe-install-libgui
+all-libgui: maybe-all-tcl maybe-all-tk maybe-all-itcl
+
+# Host modules specific to binutils.
all-bfd: maybe-all-libiberty maybe-all-intl
all-binutils: maybe-all-libiberty maybe-all-opcodes maybe-all-bfd maybe-all-flex maybe-all-bison maybe-all-byacc maybe-all-intl
-all-bison: maybe-all-texinfo
-configure-target-boehm-gc: $(ALL_GCC_C) maybe-configure-target-qthreads
+# We put install-opcodes before install-binutils because the installed
+# binutils might be on PATH, and they might need the shared opcodes
+# library.
+install-binutils: maybe-install-opcodes
+all-gas: maybe-all-libiberty maybe-all-opcodes maybe-all-bfd maybe-all-intl
+all-gprof: maybe-all-libiberty maybe-all-bfd maybe-all-opcodes maybe-all-intl
+all-ld: maybe-all-libiberty maybe-all-bfd maybe-all-opcodes maybe-all-bison maybe-all-byacc maybe-all-flex maybe-all-intl
+all-opcodes: maybe-all-bfd maybe-all-libiberty
+
+# Other host modules in the 'src' repository.
all-dejagnu: maybe-all-tcl maybe-all-expect maybe-all-tk
-all-diff: maybe-all-libiberty
-configure-target-examples: $(ALL_GCC_C)
all-expect: maybe-all-tcl maybe-all-tk
+all-itcl: maybe-all-tcl maybe-all-tk
+# We put install-tcl before install-itcl because itcl wants to run a
+# program on installation which uses the Tcl libraries.
+install-itcl: maybe-install-tcl
+all-sid: maybe-all-tcl maybe-all-tk
+install-sid: maybe-install-tcl maybe-install-tk
+all-sim: maybe-all-libiberty maybe-all-bfd maybe-all-opcodes maybe-all-readline
+all-tk: maybe-all-tcl
+all-tix: maybe-all-tcl maybe-all-tk
+all-texinfo: maybe-all-libiberty
+
+# Other host modules. Warning, these are not well tested.
+all-autoconf: maybe-all-m4 maybe-all-texinfo
+all-automake: maybe-all-m4 maybe-all-texinfo
+all-bison: maybe-all-texinfo
+all-diff: maybe-all-libiberty
+all-fastjar: maybe-all-zlib maybe-all-libiberty
all-fileutils: maybe-all-libiberty
all-flex: maybe-all-libiberty maybe-all-bison maybe-all-byacc
-all-gas: maybe-all-libiberty maybe-all-opcodes maybe-all-bfd maybe-all-intl
-all-gcc: maybe-all-libiberty maybe-all-bison maybe-all-byacc maybe-all-binutils maybe-all-gas maybe-all-ld maybe-all-zlib
-all-bootstrap: maybe-all-libiberty maybe-all-texinfo maybe-all-bison maybe-all-byacc maybe-all-binutils maybe-all-gas maybe-all-ld maybe-all-zlib
-GDB_TK = @GDB_TK@
-all-gdb: maybe-all-libiberty maybe-all-opcodes maybe-all-bfd maybe-all-mmalloc maybe-all-readline maybe-all-bison maybe-all-byacc maybe-all-sim $(gdbnlmrequirements) $(GDB_TK)
-configure-target-gperf: $(ALL_GCC_CXX)
-all-target-gperf: maybe-all-target-libiberty maybe-all-target-libstdc++-v3
-all-gprof: maybe-all-libiberty maybe-all-bfd maybe-all-opcodes maybe-all-intl
all-grep: maybe-all-libiberty
all-gzip: maybe-all-libiberty
all-hello: maybe-all-libiberty
-all-itcl: maybe-all-tcl maybe-all-tk
-all-ld: maybe-all-libiberty maybe-all-bfd maybe-all-opcodes maybe-all-bison maybe-all-byacc maybe-all-flex maybe-all-intl
-configure-target-libgloss: $(ALL_GCC)
-all-target-libgloss: maybe-configure-target-newlib
-all-libgui: maybe-all-tcl maybe-all-tk maybe-all-itcl
-configure-target-libffi: $(ALL_GCC_C)
-configure-target-libjava: $(ALL_GCC_C) maybe-configure-target-zlib maybe-configure-target-boehm-gc maybe-configure-target-qthreads maybe-configure-target-libffi
-all-target-libjava: maybe-all-fastjar maybe-all-target-zlib maybe-all-target-boehm-gc maybe-all-target-qthreads maybe-all-target-libffi
-configure-target-libstdc++-v3: $(ALL_GCC_C)
-all-target-libstdc++-v3: maybe-all-target-libiberty
-configure-target-libf2c: $(ALL_GCC_C)
-all-target-libf2c: maybe-all-target-libiberty
-configure-target-libobjc: $(ALL_GCC_C)
-all-target-libobjc: maybe-all-target-libiberty
all-m4: maybe-all-libiberty maybe-all-texinfo
all-make: maybe-all-libiberty
-configure-target-newlib: $(ALL_GCC)
-configure-target-libtermcap: $(ALL_GCC_C)
-all-opcodes: maybe-all-bfd maybe-all-libiberty
all-patch: maybe-all-libiberty
all-prms: maybe-all-libiberty
-configure-target-qthreads: $(ALL_GCC_C)
all-recode: maybe-all-libiberty
all-sed: maybe-all-libiberty
all-send-pr: maybe-all-prms
-all-sid: maybe-all-tcl maybe-all-tk
-all-sim: maybe-all-libiberty maybe-all-bfd maybe-all-opcodes maybe-all-readline
all-snavigator: maybe-all-tcl maybe-all-tk maybe-all-itcl maybe-all-tix maybe-all-db maybe-all-grep maybe-all-libgui
all-tar: maybe-all-libiberty
all-tclX: maybe-all-tcl maybe-all-tk
-all-tk: maybe-all-tcl
-all-texinfo: maybe-all-libiberty
-all-tix: maybe-all-tcl maybe-all-tk
-configure-target-winsup: $(ALL_GCC_C)
-all-target-winsup: maybe-all-target-libiberty maybe-all-target-libtermcap
all-uudecode: maybe-all-libiberty
-configure-target-zlib: $(ALL_GCC_C)
-all-fastjar: maybe-all-zlib maybe-all-libiberty
-configure-target-fastjar: maybe-configure-target-zlib
-all-target-fastjar: maybe-all-target-zlib maybe-all-target-libiberty
-configure-target-libiberty: $(ALL_GCC_C)
-install-gdb: maybe-install-tcl maybe-install-tk maybe-install-itcl maybe-install-tix maybe-install-libgui
-install-sid: maybe-install-tcl maybe-install-tk
-# We put install-opcodes before install-binutils because the installed
-# binutils might be on PATH, and they might need the shared opcodes
-# library.
-install-binutils: maybe-install-opcodes
-
-# We put install-tcl before install-itcl because itcl wants to run a
-# program on installation which uses the Tcl libraries.
-install-itcl: maybe-install-tcl
+ALL_GCC = maybe-all-gcc
+ALL_GCC_C = $(ALL_GCC) maybe-all-target-newlib maybe-all-target-libgloss
+ALL_GCC_CXX = $(ALL_GCC_C) maybe-all-target-libstdc++-v3
-# This is a slightly kludgy method of getting dependencies on
-# all-build-libiberty correct; it would be better to build it every time.
-all-gcc: maybe-all-build-libiberty
+# Target modules specific to gcc.
+$(TARGET_SUBDIR)/boehm-gc/Makefile: $(ALL_GCC_C) maybe-configure-target-qthreads
+$(TARGET_SUBDIR)/fastjar/Makefile: maybe-configure-target-zlib
+all-target-fastjar: maybe-all-target-zlib maybe-all-target-libiberty
+$(TARGET_SUBDIR)/libf2c/Makefile: $(ALL_GCC_C)
+all-target-libf2c: maybe-all-target-libiberty
+$(TARGET_SUBDIR)/libffi/Makefile: $(ALL_GCC_C)
+$(TARGET_SUBDIR)/libjava/Makefile: $(ALL_GCC_C) maybe-configure-target-zlib maybe-configure-target-boehm-gc maybe-configure-target-qthreads maybe-configure-target-libffi
+all-target-libjava: maybe-all-fastjar maybe-all-target-zlib maybe-all-target-boehm-gc maybe-all-target-qthreads maybe-all-target-libffi
+$(TARGET_SUBDIR)/libobjc/Makefile: $(ALL_GCC_C)
+all-target-libobjc: maybe-all-target-libiberty
+$(TARGET_SUBDIR)/libstdc++-v3/Makefile: $(ALL_GCC_C)
+all-target-libstdc++-v3: maybe-all-target-libiberty
+$(TARGET_SUBDIR)/zlib/Makefile: $(ALL_GCC_C)
-# Dependencies of all-build-foo on configure-build-foo.
-[+ FOR build_modules +]all-build-[+module+]: configure-build-[+module+]
-[+ ENDFOR build_modules +]
+# Target modules in the 'src' repository.
+$(TARGET_SUBDIR)/examples/Makefile: $(ALL_GCC_C)
+$(TARGET_SUBDIR)/libgloss/Makefile: $(ALL_GCC)
+all-target-libgloss: maybe-configure-target-newlib
+$(TARGET_SUBDIR)/libiberty/Makefile: $(ALL_GCC_C)
+$(TARGET_SUBDIR)/libtermcap/Makefile: $(ALL_GCC_C)
+$(TARGET_SUBDIR)/newlib/Makefile: $(ALL_GCC)
+$(TARGET_SUBDIR)/winsup/Makefile: $(ALL_GCC_C)
+all-target-winsup: maybe-all-target-libiberty maybe-all-target-libtermcap
-# Dependencies of all-target-foo on configure-target-foo.
-[+ FOR target_modules +]all-target-[+module+]: configure-target-[+module+]
-[+ ENDFOR target_modules +]
+# Other target modules. Warning, these are not well tested.
+$(TARGET_SUBDIR)/gperf/Makefile: $(ALL_GCC_CXX)
+all-target-gperf: maybe-all-target-libiberty maybe-all-target-libstdc++-v3
+$(TARGET_SUBDIR)/qthreads/Makefile: $(ALL_GCC_C)
# Dependencies of maybe-foo on foo. These are used because, for example,
# all-gcc only depends on all-gas if gas is present and being configured.
@maybe_dependencies@
-### other supporting targets
+# Serialization dependencies. Host configures don't work well in parallel to
+# each other, due to contention over config.cache. Target configures and
+# build configures are similar.
+@serialization_dependencies@
-MAKEDIRS= \
- $(DESTDIR)$(prefix) \
- $(DESTDIR)$(exec_prefix)
-.PHONY: installdirs
-installdirs: mkinstalldirs
- $(SHELL) $(srcdir)/mkinstalldirs $(MAKEDIRS)
-
-dir.info: do-install-info
- if [ -f $(srcdir)/texinfo/gen-info-dir ] ; then \
- $(srcdir)/texinfo/gen-info-dir $(infodir) $(srcdir)/texinfo/dir.info-template > dir.info.new ; \
- mv -f dir.info.new dir.info ; \
- else true ; \
- fi
-
-dist:
- @echo "Building a full distribution of this tree isn't done"
- @echo "via 'make dist'. Check out the etc/ subdirectory"
-
-etags tags: TAGS
-
-# Right now this just builds TAGS in each subdirectory. emacs19 has the
-# ability to use several tags files at once, so there is probably no need
-# to combine them into one big TAGS file (like CVS 1.3 does). We could
-# (if we felt like it) have this Makefile write a piece of elisp which
-# the user could load to tell emacs19 where all the TAGS files we just
-# built are.
-TAGS: do-TAGS
+# --------------------------------
+# Regenerating top level configury
+# --------------------------------
# Rebuilding Makefile.in, using autogen.
$(srcdir)/Makefile.in: # $(srcdir)/Makefile.tpl $(srcdir)/Makefile.def
projects / deliverable / binutils-gdb.git / blobdiff