oldincludedir = @oldincludedir@
infodir = @infodir@
mandir = @mandir@
-gxx_include_dir=@gxx_include_dir@
+gxx_include_dir = @gxx_include_dir@
+libstdcxx_incdir = @libstdcxx_incdir@
tooldir = @tooldir@
build_tooldir = @build_tooldir@
AS = @AS@
AR = @AR@
AR_FLAGS = rc
-CC = cc
+CC = @CC@
# Special variables passed down in EXTRA_GCC_FLAGS. They are defined
# here so that they can be overridden by Makefile fragments.
BUILD_PREFIX = @BUILD_PREFIX@
BUILD_PREFIX_1 = @BUILD_PREFIX_1@
-# These flag values are normally overridden by the configure script.
-CFLAGS = -g
-CXXFLAGS = -g -O2
+CFLAGS = @CFLAGS@
+CXXFLAGS = @CXXFLAGS@
LDFLAGS =
LIBCFLAGS = $(CFLAGS)
PICFLAG =
PICFLAG_FOR_TARGET =
-CXX = c++
+CXX = @CXX@
# Use -O2 to stress test the compiler.
LIBCXXFLAGS = $(CXXFLAGS) -fno-implicit-templates
installcheck: do-installcheck
dvi: do-dvi
-# Make sure makeinfo is built before we do a `make info'.
-do-info: all-texinfo
+# Make sure makeinfo is built before we do a `make info', if we're
+# in fact building texinfo.
+do-info: maybe-all-texinfo
install-info: do-install-info dir.info
s=`cd $(srcdir); ${PWD}`; export s; \
.PHONY: configure-build-[+module+] maybe-configure-build-[+module+]
maybe-configure-build-[+module+]:
configure-build-[+module+]: $(BUILD_SUBDIR)/[+module+]/Makefile
-$(BUILD_SUBDIR)/[+module+]/Makefile: config.status
+@build_prefix@$(BUILD_SUBDIR)/[+module+]/Makefile: config.status
@[ -d $(BUILD_SUBDIR)/[+module+] ] || mkdir $(BUILD_SUBDIR)/[+module+];\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(HOST_CONFIGARGS) $${srcdiroption} \
|| exit 1
-# Don't remake gcc if it's already been made by 'bootstrap'; that causes
-# nothing but trouble. This wart will be fixed eventually by moving
+# Don't 'make all' in gcc if it's already been made by 'bootstrap'; that
+# causes trouble. This wart will be fixed eventually by moving
# the bootstrap behavior to this file.
.PHONY: all-gcc maybe-all-gcc
maybe-all-gcc:
all-gcc: configure-gcc
- @if [ -f gcc/xgcc ] ; then \
- exit 0 ; \
+ @if [ -f gcc/stage_last ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) quickstrap); \
else \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
true; \
fi
-.PHONY: check-c++
-check-c++:
+.PHONY: check-gcc-c++
+check-gcc-c++:
@if [ -f ./gcc/Makefile ] ; then \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
(cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) check-c++); \
- $(MAKE) check-target-libstdc++-v3; \
else \
true; \
- fi
+ fi
+
+.PHONY: check-c++
+check-c++: check-target-libstdc++-v3 check-gcc-c++
.PHONY: install-gcc maybe-install-gcc
maybe-install-gcc:
# Host modules specific to gcc.
# GCC needs to identify certain tools.
-gcc/Makefile: maybe-configure-binutils maybe-configure-gas maybe-configure-ld maybe-configure-bison maybe-configure-flex
+configure-gcc: maybe-configure-binutils maybe-configure-gas maybe-configure-ld maybe-configure-bison maybe-configure-flex
all-gcc: maybe-all-libiberty maybe-all-bison maybe-all-byacc maybe-all-binutils maybe-all-gas maybe-all-ld maybe-all-zlib
# This is a slightly kludgy method of getting dependencies on
# all-build-libiberty correct; it would be better to build it every time.
# Host modules specific to gdb.
# GDB needs to know that the simulator is being built.
-gdb/Makefile: maybe-configure-tcl maybe-configure-tk maybe-configure-sim
+configure-gdb: maybe-configure-tcl maybe-configure-tk maybe-configure-sim
GDB_TK = @GDB_TK@
all-gdb: maybe-all-libiberty maybe-all-opcodes maybe-all-bfd maybe-all-mmalloc maybe-all-readline maybe-all-bison maybe-all-byacc maybe-all-sim $(gdbnlmrequirements) $(GDB_TK)
install-gdb: maybe-install-tcl maybe-install-tk maybe-install-itcl maybe-install-tix maybe-install-libgui
-libgui/Makefile: maybe-configure-tcl maybe-configure-tk
+configure-libgui: maybe-configure-tcl maybe-configure-tk
all-libgui: maybe-all-tcl maybe-all-tk maybe-all-itcl
# Host modules specific to binutils.
-bfd/Makefile: configure-libiberty
+configure-bfd: configure-libiberty
all-bfd: maybe-all-libiberty maybe-all-intl
all-binutils: maybe-all-libiberty maybe-all-opcodes maybe-all-bfd maybe-all-flex maybe-all-bison maybe-all-byacc maybe-all-intl
# We put install-opcodes before install-binutils because the installed
# Other host modules in the 'src' repository.
all-dejagnu: maybe-all-tcl maybe-all-expect maybe-all-tk
-expect/Makefile: maybe-configure-tcl maybe-configure-tk
+configure-expect: maybe-configure-tcl maybe-configure-tk
all-expect: maybe-all-tcl maybe-all-tk
-itcl/Makefile: maybe-configure-tcl maybe-configure-tk
+configure-itcl: maybe-configure-tcl maybe-configure-tk
all-itcl: maybe-all-tcl maybe-all-tk
# We put install-tcl before install-itcl because itcl wants to run a
# program on installation which uses the Tcl libraries.
install-itcl: maybe-install-tcl
all-sid: maybe-all-tcl maybe-all-tk
install-sid: maybe-install-tcl maybe-install-tk
-all-sim: maybe-all-libiberty maybe-all-bfd maybe-all-opcodes maybe-all-readline
-tk/Makefile: maybe-configure-tcl
+all-sim: maybe-all-libiberty maybe-all-bfd maybe-all-opcodes maybe-all-readline maybe-configure-gdb
+configure-tk: maybe-configure-tcl
all-tk: maybe-all-tcl
-tix/Makefile: maybe-configure-tcl maybe-configure-tk
+configure-tix: maybe-configure-tcl maybe-configure-tk
all-tix: maybe-all-tcl maybe-all-tk
all-texinfo: maybe-all-libiberty
all-send-pr: maybe-all-prms
all-snavigator: maybe-all-tcl maybe-all-tk maybe-all-itcl maybe-all-tix maybe-all-db maybe-all-grep maybe-all-libgui
all-tar: maybe-all-libiberty
-all-tclX: maybe-all-tcl maybe-all-tk
all-uudecode: maybe-all-libiberty
ALL_GCC = maybe-all-gcc
ALL_GCC_CXX = $(ALL_GCC_C) maybe-all-target-libstdc++-v3
# Target modules specific to gcc.
-$(TARGET_SUBDIR)/boehm-gc/Makefile: $(ALL_GCC_C) maybe-configure-target-qthreads
-$(TARGET_SUBDIR)/fastjar/Makefile: maybe-configure-target-zlib
+configure-target-boehm-gc: $(ALL_GCC_C) maybe-configure-target-qthreads
+configure-target-fastjar: maybe-configure-target-zlib
all-target-fastjar: maybe-all-target-zlib maybe-all-target-libiberty
-$(TARGET_SUBDIR)/libf2c/Makefile: $(ALL_GCC_C)
+configure-target-libf2c: $(ALL_GCC_C)
all-target-libf2c: maybe-all-target-libiberty
-$(TARGET_SUBDIR)/libffi/Makefile: $(ALL_GCC_C)
-$(TARGET_SUBDIR)/libjava/Makefile: $(ALL_GCC_C) maybe-configure-target-zlib maybe-configure-target-boehm-gc maybe-configure-target-qthreads maybe-configure-target-libffi
+configure-target-libffi: $(ALL_GCC_C)
+configure-target-libjava: $(ALL_GCC_C) maybe-configure-target-zlib maybe-configure-target-boehm-gc maybe-configure-target-qthreads maybe-configure-target-libffi
all-target-libjava: maybe-all-fastjar maybe-all-target-zlib maybe-all-target-boehm-gc maybe-all-target-qthreads maybe-all-target-libffi
-$(TARGET_SUBDIR)/libobjc/Makefile: $(ALL_GCC_C)
+configure-target-libobjc: $(ALL_GCC_C)
all-target-libobjc: maybe-all-target-libiberty
-$(TARGET_SUBDIR)/libstdc++-v3/Makefile: $(ALL_GCC_C)
+configure-target-libstdc++-v3: $(ALL_GCC_C)
all-target-libstdc++-v3: maybe-all-target-libiberty
-$(TARGET_SUBDIR)/zlib/Makefile: $(ALL_GCC_C)
+configure-target-zlib: $(ALL_GCC_C)
# Target modules in the 'src' repository.
-$(TARGET_SUBDIR)/examples/Makefile: $(ALL_GCC_C)
-$(TARGET_SUBDIR)/libgloss/Makefile: $(ALL_GCC)
+configure-target-examples: $(ALL_GCC_C)
+configure-target-libgloss: $(ALL_GCC)
all-target-libgloss: maybe-configure-target-newlib
-$(TARGET_SUBDIR)/libiberty/Makefile: $(ALL_GCC_C)
-$(TARGET_SUBDIR)/libtermcap/Makefile: $(ALL_GCC_C)
-$(TARGET_SUBDIR)/newlib/Makefile: $(ALL_GCC)
-$(TARGET_SUBDIR)/winsup/Makefile: $(ALL_GCC_C)
+configure-target-libiberty: $(ALL_GCC_C)
+configure-target-libtermcap: $(ALL_GCC_C)
+configure-target-newlib: $(ALL_GCC)
+configure-target-rda: $(ALL_GCC_C)
+configure-target-winsup: $(ALL_GCC_C)
all-target-winsup: maybe-all-target-libiberty maybe-all-target-libtermcap
# Other target modules. Warning, these are not well tested.
-$(TARGET_SUBDIR)/gperf/Makefile: $(ALL_GCC_CXX)
+configure-target-gperf: $(ALL_GCC_CXX)
all-target-gperf: maybe-all-target-libiberty maybe-all-target-libstdc++-v3
-$(TARGET_SUBDIR)/qthreads/Makefile: $(ALL_GCC_C)
+configure-target-qthreads: $(ALL_GCC_C)
# Dependencies of maybe-foo on foo. These are used because, for example,
# all-gcc only depends on all-gas if gas is present and being configured.
projects / deliverable / binutils-gdb.git / blobdiff