config DEBUG_BCM2835
bool "Kernel low-level debugging on BCM2835 PL011 UART"
- depends on ARCH_BCM2835
+ depends on ARCH_BCM2835 && ARCH_MULTI_V6
+ select DEBUG_UART_PL01X
+
+ config DEBUG_BCM2836
+ bool "Kernel low-level debugging on BCM2836 PL011 UART"
+ depends on ARCH_BCM2835 && ARCH_MULTI_V7
select DEBUG_UART_PL01X
config DEBUG_BCM_5301X
mobile SoCs in the Kona family of chips (e.g. bcm28155,
bcm11351, etc...)
- config DEBUG_BCM63XX
+ config DEBUG_BCM63XX_UART
bool "Kernel low-level debugging on BCM63XX UART"
depends on ARCH_BCM_63XX
- select DEBUG_UART_BCM63XX
config DEBUG_BERLIN_UART
bool "Marvell Berlin SoC Debug UART"
Say Y here if you want the debug print routines to direct
their output to UART0 serial port on DaVinci DMx devices.
- config DEBUG_ZYNQ_UART0
- bool "Kernel low-level debugging on Xilinx Zynq using UART0"
- depends on ARCH_ZYNQ
- help
- Say Y here if you want the debug print routines to direct
- their output to UART0 on the Zynq platform.
-
- config DEBUG_ZYNQ_UART1
- bool "Kernel low-level debugging on Xilinx Zynq using UART1"
- depends on ARCH_ZYNQ
- help
- Say Y here if you want the debug print routines to direct
- their output to UART1 on the Zynq platform.
-
- If you have a ZC702 board and want early boot messages to
- appear on the USB serial adaptor, select this option.
-
config DEBUG_DC21285_PORT
bool "Kernel low-level debugging messages via footbridge serial port"
depends on FOOTBRIDGE
Say Y here if you want the debug print routines to direct
their output to the UA0 serial port in the CX92755.
+ config DEBUG_EP93XX
+ bool "Kernel low-level debugging messages via ep93xx UART"
+ depends on ARCH_EP93XX
+ select DEBUG_UART_PL01X
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Cirrus Logic EP93xx based platforms.
+
config DEBUG_FOOTBRIDGE_COM1
bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
depends on FOOTBRIDGE
+ select DEBUG_UART_8250
help
Say Y here if you want the debug print routines to direct
their output to the 8250 at PCI COM1.
+ config DEBUG_GEMINI
+ bool "Kernel low-level debugging messages via Cortina Systems Gemini UART"
+ depends on ARCH_GEMINI
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Cortina Gemini based platforms.
+
config DEBUG_HI3620_UART
bool "Hisilicon HI3620 Debug UART"
depends on ARCH_HI3xxx
Say Y here if you want kernel low-level debugging support
on i.MX7D.
+ config DEBUG_INTEGRATOR
+ bool "Kernel low-level debugging messages via ARM Integrator UART"
+ depends on ARCH_INTEGRATOR
+ select DEBUG_UART_PL01X
+ help
+ Say Y here if you want kernel low-level debugging support
+ on ARM Integrator platforms.
+
config DEBUG_KEYSTONE_UART0
bool "Kernel low-level debugging on KEYSTONE2 using UART0"
depends on ARCH_KEYSTONE
Say Y here if you want kernel low-level debugging support
on NXP LPC18xx/43xx UART0.
+ config DEBUG_LPC32XX
+ bool "Kernel low-level debugging messages via NXP LPC32xx UART"
+ depends on ARCH_LPC32XX
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on NXP LPC32xx based platforms.
+
config DEBUG_MESON_UARTAO
bool "Kernel low-level debugging via Meson6 UARTAO"
depends on ARCH_MESON
Say Y here if you want kernel low-level debugging support
on MMP UART3.
- config DEBUG_QCOM_UARTDM
- bool "Kernel low-level debugging messages via QCOM UARTDM"
- depends on ARCH_QCOM
- help
- Say Y here if you want the debug print routines to direct
- their output to the serial port on Qualcomm devices.
-
- ARCH DEBUG_UART_PHYS DEBUG_UART_VIRT
- APQ8064 0x16640000 0xf0040000
- APQ8084 0xf995e000 0xfa75e000
- MSM8X60 0x19c40000 0xf0040000
- MSM8960 0x16440000 0xf0040000
- MSM8974 0xf991e000 0xfa71e000
-
- Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration
- options based on your needs.
-
config DEBUG_MVEBU_UART0
bool "Kernel low-level debugging messages via MVEBU UART0 (old bootloaders)"
depends on ARCH_MVEBU
+ depends on ARCH_MVEBU && CPU_V7
select DEBUG_UART_8250
help
Say Y here if you want kernel low-level debugging support
Plathome OpenBlocks AX3, when using the original
bootloader.
+ This option will not work on older Marvell platforms
+ (Kirkwood, Dove, MV78xx0, Orion5x), which should pick
+ the "new bootloader" variant.
+
If the wrong DEBUG_MVEBU_UART* option is selected,
when u-boot hands over to the kernel, the system
silently crashes, with no serial output at all.
config DEBUG_MVEBU_UART0_ALTERNATE
bool "Kernel low-level debugging messages via MVEBU UART0 (new bootloaders)"
- depends on ARCH_MVEBU
+ depends on ARCH_MVEBU || ARCH_DOVE || ARCH_MV78XX0 || ARCH_ORION5X
select DEBUG_UART_8250
help
Say Y here if you want kernel low-level debugging support
- on MVEBU based platforms on UART0.
+ on MVEBU based platforms on UART0. (Armada XP, Armada 3xx,
+ Kirkwood, Dove, MV78xx0, Orion5x).
+
This option should be used with the new bootloaders
that remap the internal registers at 0xf1000000.
select DEBUG_UART_8250
help
Say Y here if you want kernel low-level debugging support
- on MVEBU based platforms on UART1.
+ on MVEBU based platforms on UART1. (Armada XP, Armada 3xx,
+ Kirkwood, Dove, MV78xx0, Orion5x).
This option should be used with the new bootloaders
that remap the internal registers at 0xf1000000.
+ All of the older (pre Armada XP/370) platforms also use
+ this address, regardless of the boot loader version.
If the wrong DEBUG_MVEBU_UART* option is selected,
when u-boot hands over to the kernel, the system
silently crashes, with no serial output at all.
- config DEBUG_VF_UART
- bool "Vybrid UART"
- depends on SOC_VF610
+ config DEBUG_MT6589_UART0
+ bool "Mediatek mt6589 UART0"
+ depends on ARCH_MEDIATEK
+ select DEBUG_UART_8250
help
Say Y here if you want kernel low-level debugging support
- on Vybrid based platforms.
+ for Mediatek mt6589 based platforms on UART0.
+
+ config DEBUG_MT8127_UART0
+ bool "Mediatek mt8127/mt6592 UART0"
+ depends on ARCH_MEDIATEK
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ for Mediatek mt8127 based platforms on UART0.
+
+ config DEBUG_MT8135_UART3
+ bool "Mediatek mt8135 UART3"
+ depends on ARCH_MEDIATEK
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ for Mediatek mt8135 based platforms on UART3.
config DEBUG_NETX_UART
bool "Kernel low-level debugging messages via NetX UART"
Say Y here if you want kernel low-level debugging support
on PXA UART1.
+ config DEBUG_QCOM_UARTDM
+ bool "Kernel low-level debugging messages via QCOM UARTDM"
+ depends on ARCH_QCOM
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the serial port on Qualcomm devices.
+
+ ARCH DEBUG_UART_PHYS DEBUG_UART_VIRT
+ APQ8064 0x16640000 0xf0040000
+ APQ8084 0xf995e000 0xfa75e000
+ MSM8X60 0x19c40000 0xf0040000
+ MSM8960 0x16440000 0xf0040000
+ MSM8974 0xf991e000 0xfa71e000
+
+ Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration
+ options based on your needs.
+
config DEBUG_REALVIEW_STD_PORT
bool "RealView Default UART"
depends on ARCH_REALVIEW
depends on PLAT_SAMSUNG
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
select DEBUG_S3C24XX_UART if ARCH_S3C24XX
+ select DEBUG_S3C64XX_UART if ARCH_S3C64XX
select DEBUG_S5PV210_UART if ARCH_S5PV210
bool "Use Samsung S3C UART 0 for low-level debug"
help
depends on PLAT_SAMSUNG
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
select DEBUG_S3C24XX_UART if ARCH_S3C24XX
+ select DEBUG_S3C64XX_UART if ARCH_S3C64XX
select DEBUG_S5PV210_UART if ARCH_S5PV210
bool "Use Samsung S3C UART 1 for low-level debug"
help
depends on PLAT_SAMSUNG
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
select DEBUG_S3C24XX_UART if ARCH_S3C24XX
+ select DEBUG_S3C64XX_UART if ARCH_S3C64XX
select DEBUG_S5PV210_UART if ARCH_S5PV210
bool "Use Samsung S3C UART 2 for low-level debug"
help
config DEBUG_S3C_UART3
depends on PLAT_SAMSUNG && (ARCH_EXYNOS || ARCH_S5PV210)
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
+ select DEBUG_S3C64XX_UART if ARCH_S3C64XX
select DEBUG_S5PV210_UART if ARCH_S5PV210
bool "Use Samsung S3C UART 3 for low-level debug"
help
Say Y here if you want kernel low-level debugging support
on Allwinner A31/A23 based platforms on the R_UART.
+ config DEBUG_SIRFPRIMA2_UART1
+ bool "Kernel low-level debugging messages via SiRFprimaII UART1"
+ depends on ARCH_PRIMA2
+ select DEBUG_SIRFSOC_UART
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the uart1 port on SiRFprimaII devices.
+
+ config DEBUG_SIRFATLAS7_UART0
+ bool "Kernel low-level debugging messages via SiRFatlas7 UART0"
+ depends on ARCH_ATLAS7
+ select DEBUG_SIRFSOC_UART
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the uart0 port on SiRFATLAS7 devices.The uart0
+ is used on SiRFATLAS7 as a extra debug port.sometimes an extra
+ debug port can be very useful.
+
+ config DEBUG_SIRFATLAS7_UART1
+ bool "Kernel low-level debugging messages via SiRFatlas7 UART1"
+ depends on ARCH_ATLAS7
+ select DEBUG_SIRFSOC_UART
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the uart1 port on SiRFATLAS7 devices.
+
+ config DEBUG_SPEAR3XX
+ bool "Kernel low-level debugging messages via ST SPEAr 3xx/6xx UART"
+ depends on ARCH_SPEAR3XX || ARCH_SPEAR6XX
+ select DEBUG_UART_PL01X
+ help
+ Say Y here if you want kernel low-level debugging support
+ on ST SPEAr based platforms.
+
+ config DEBUG_SPEAR13XX
+ bool "Kernel low-level debugging messages via ST SPEAr 13xx UART"
+ depends on ARCH_SPEAR13XX
+ select DEBUG_UART_PL01X
+ help
+ Say Y here if you want kernel low-level debugging support
+ on ST SPEAr13xx based platforms.
+
+ config STIH41X_DEBUG_ASC2
+ bool "Use StiH415/416 ASC2 UART for low-level debug"
+ depends on ARCH_STI
+ select DEBUG_STI_UART
+ help
+ Say Y here if you want kernel low-level debugging support
+ on STiH415/416 based platforms like b2000, which has
+ default UART wired up to ASC2.
+
+ If unsure, say N.
+
+ config STIH41X_DEBUG_SBC_ASC1
+ bool "Use StiH415/416 SBC ASC1 UART for low-level debug"
+ depends on ARCH_STI
+ select DEBUG_STI_UART
+ help
+ Say Y here if you want kernel low-level debugging support
+ on STiH415/416 based platforms like b2020. which has
+ default UART wired up to SBC ASC1.
+
+ If unsure, say N.
+
config TEGRA_DEBUG_UART_AUTO_ODMDATA
bool "Kernel low-level debugging messages via Tegra UART via ODMDATA"
depends on ARCH_TEGRA
Say Y here if you want kernel low-level debugging support
on Tegra based platforms.
- config DEBUG_SIRFPRIMA2_UART1
- bool "Kernel low-level debugging messages via SiRFprimaII UART1"
- depends on ARCH_PRIMA2
- select DEBUG_SIRFSOC_UART
- help
- Say Y here if you want the debug print routines to direct
- their output to the uart1 port on SiRFprimaII devices.
-
- config DEBUG_SIRFATLAS7_UART0
- bool "Kernel low-level debugging messages via SiRFatlas7 UART0"
- depends on ARCH_ATLAS7
- select DEBUG_SIRFSOC_UART
- help
- Say Y here if you want the debug print routines to direct
- their output to the uart0 port on SiRFATLAS7 devices.The uart0
- is used on SiRFATLAS7 as a extra debug port.sometimes an extra
- debug port can be very useful.
-
- config DEBUG_SIRFATLAS7_UART1
- bool "Kernel low-level debugging messages via SiRFatlas7 UART1"
- depends on ARCH_ATLAS7
- select DEBUG_SIRFSOC_UART
- help
- Say Y here if you want the debug print routines to direct
- their output to the uart1 port on SiRFATLAS7 devices.
-
- config STIH41X_DEBUG_ASC2
- bool "Use StiH415/416 ASC2 UART for low-level debug"
- depends on ARCH_STI
- select DEBUG_STI_UART
- help
- Say Y here if you want kernel low-level debugging support
- on STiH415/416 based platforms like b2000, which has
- default UART wired up to ASC2.
-
- If unsure, say N.
-
- config STIH41X_DEBUG_SBC_ASC1
- bool "Use StiH415/416 SBC ASC1 UART for low-level debug"
- depends on ARCH_STI
- select DEBUG_STI_UART
- help
- Say Y here if you want kernel low-level debugging support
- on STiH415/416 based platforms like b2020. which has
- default UART wired up to SBC ASC1.
-
- If unsure, say N.
-
config DEBUG_U300_UART
bool "Kernel low-level debugging messages via U300 UART0"
depends on ARCH_U300
Say Y here if you want kernel low-level debugging support
on Ux500 based platforms.
- config DEBUG_MT6589_UART0
- bool "Mediatek mt6589 UART0"
- depends on ARCH_MEDIATEK
- select DEBUG_UART_8250
- help
- Say Y here if you want kernel low-level debugging support
- for Mediatek mt6589 based platforms on UART0.
-
- config DEBUG_MT8127_UART0
- bool "Mediatek mt8127/mt6592 UART0"
- depends on ARCH_MEDIATEK
- select DEBUG_UART_8250
- help
- Say Y here if you want kernel low-level debugging support
- for Mediatek mt8127 based platforms on UART0.
-
- config DEBUG_MT8135_UART3
- bool "Mediatek mt8135 UART3"
- depends on ARCH_MEDIATEK
- select DEBUG_UART_8250
+ config DEBUG_VERSATILE
+ bool "Kernel low-level debugging messages via ARM Versatile UART"
+ depends on ARCH_VERSATILE
+ select DEBUG_UART_PL01X
help
Say Y here if you want kernel low-level debugging support
- for Mediatek mt8135 based platforms on UART3.
+ on ARM Versatile platforms.
config DEBUG_VEXPRESS_UART0_DETECT
bool "Autodetect UART0 on Versatile Express Cortex-A core tiles"
This option selects UART0 at 0xb0090000. This is appropriate for
Cortex-R series tiles and SMMs, such as Cortex-R5 and Cortex-R7
+ config DEBUG_VF_UART
+ bool "Vybrid UART"
+ depends on SOC_VF610
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Vybrid based platforms.
+
config DEBUG_VT8500_UART0
bool "Use UART0 on VIA/Wondermedia SoCs"
depends on ARCH_VT8500
This option selects UART0 on VIA/Wondermedia System-on-a-chip
devices, including VT8500, WM8505, WM8650 and WM8850.
+ config DEBUG_ZTE_ZX
+ bool "Use ZTE ZX UART"
+ select DEBUG_UART_PL01X
+ depends on ARCH_ZX
+ help
+ Say Y here if you are enabling ZTE ZX296702 SOC and need
+ debug uart support.
+
+ This option is preferred over the platform specific
+ options; the platform specific options are deprecated
+ and will be soon removed.
+
+ config DEBUG_ZYNQ_UART0
+ bool "Kernel low-level debugging on Xilinx Zynq using UART0"
+ depends on ARCH_ZYNQ
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART0 on the Zynq platform.
+
+ config DEBUG_ZYNQ_UART1
+ bool "Kernel low-level debugging on Xilinx Zynq using UART1"
+ depends on ARCH_ZYNQ
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART1 on the Zynq platform.
+
+ If you have a ZC702 board and want early boot messages to
+ appear on the USB serial adaptor, select this option.
+
config DEBUG_ICEDCC
bool "Kernel low-level debugging via EmbeddedICE DCC channel"
help
For more details about semihosting, please see
chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd.
- config DEBUG_ZTE_ZX
- bool "Use ZTE ZX UART"
- select DEBUG_UART_PL01X
- depends on ARCH_ZX
- help
- Say Y here if you are enabling ZTE ZX296702 SOC and need
- debug uart support.
-
- This option is preferred over the platform specific
- options; the platform specific options are deprecated
- and will be soon removed.
-
config DEBUG_LL_UART_8250
bool "Kernel low-level debugging via 8250 UART"
help
config DEBUG_S3C24XX_UART
bool
+config DEBUG_S3C64XX_UART
+ bool
+
config DEBUG_S5PV210_UART
bool
default "debug/at91.S" if DEBUG_AT91_UART
default "debug/asm9260.S" if DEBUG_ASM9260_UART
default "debug/clps711x.S" if DEBUG_CLPS711X_UART1 || DEBUG_CLPS711X_UART2
+ default "debug/dc21285.S" if DEBUG_DC21285_PORT
default "debug/meson.S" if DEBUG_MESON_UARTAO
default "debug/pl01x.S" if DEBUG_LL_UART_PL01X || DEBUG_UART_PL01X
default "debug/exynos.S" if DEBUG_EXYNOS_UART
default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA0
default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA1
default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA4
- default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART
+ default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART || DEBUG_S3C64XX_UART
default "debug/s5pv210.S" if DEBUG_S5PV210_UART
default "debug/sirf.S" if DEBUG_SIRFSOC_UART
default "debug/sti.S" if DEBUG_STI_UART
default "debug/vf.S" if DEBUG_VF_UART
default "debug/vt8500.S" if DEBUG_VT8500_UART0
default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
- default "debug/bcm63xx.S" if DEBUG_UART_BCM63XX
+ default "debug/bcm63xx.S" if DEBUG_BCM63XX_UART
default "debug/digicolor.S" if DEBUG_DIGICOLOR_UA0
default "mach/debug-macro.S"
# Compatibility options for 8250
config DEBUG_UART_8250
- def_bool ARCH_DOVE || ARCH_EBSA110 || \
- (FOOTBRIDGE && !DEBUG_DC21285_PORT) || \
- ARCH_GEMINI || ARCH_IOP13XX || ARCH_IOP32X || \
- ARCH_IOP33X || ARCH_IXP4XX || \
- ARCH_LPC32XX || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC
-
-# Compatibility options for BCM63xx
-config DEBUG_UART_BCM63XX
- def_bool ARCH_BCM_63XX
+ def_bool ARCH_EBSA110 || \
+ ARCH_IOP13XX || ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX || \
+ ARCH_RPC
config DEBUG_UART_PHYS
hex "Physical base address of debug UART"
default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT
default 0x10124000 if DEBUG_RK3X_UART0
default 0x10126000 if DEBUG_RK3X_UART1
- default 0x101f1000 if ARCH_VERSATILE
+ default 0x101f1000 if DEBUG_VERSATILE
default 0x101fb000 if DEBUG_NOMADIK_UART
default 0x11002000 if DEBUG_MT8127_UART0
default 0x11006000 if DEBUG_MT6589_UART0
default 0x11009000 if DEBUG_MT8135_UART3
- default 0x16000000 if ARCH_INTEGRATOR
+ default 0x16000000 if DEBUG_INTEGRATOR
default 0x18000300 if DEBUG_BCM_5301X
default 0x18010000 if DEBUG_SIRFATLAS7_UART0
default 0x18020000 if DEBUG_SIRFATLAS7_UART1
default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
default 0x20068000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
default 0x20201000 if DEBUG_BCM2835
+ default 0x3f201000 if DEBUG_BCM2836
default 0x3e000000 if DEBUG_BCM_KONA_UART
default 0x4000e400 if DEBUG_LL_UART_EFM32
default 0x40081000 if DEBUG_LPC18XX_UART0
- default 0x40090000 if ARCH_LPC32XX
+ default 0x40090000 if DEBUG_LPC32XX
default 0x40100000 if DEBUG_PXA_UART1
- default 0x42000000 if ARCH_GEMINI
+ default 0x42000000 if DEBUG_GEMINI
default 0x50000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
DEBUG_S3C2410_UART0)
default 0x50004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
default 0x50008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
DEBUG_S3C2410_UART2)
default 0x78000000 if DEBUG_CNS3XXX
- default 0x7c0003f8 if FOOTBRIDGE
+ default 0x7c0003f8 if DEBUG_FOOTBRIDGE_COM1
+ default 0x7f005000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0
+ default 0x7f005400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1
+ default 0x7f005800 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART2
+ default 0x7f005c00 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART3
default 0x80010000 if DEBUG_ASM9260_UART
default 0x80070000 if DEBUG_IMX23_UART
default 0x80074000 if DEBUG_IMX28_UART
default 0x80230000 if DEBUG_PICOXCELL_UART
- default 0x808c0000 if ARCH_EP93XX
+ default 0x808c0000 if DEBUG_EP93XX || ARCH_EP93XX
default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
default 0xb0060000 if DEBUG_SIRFPRIMA2_UART1
default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX
default 0xc0013000 if DEBUG_U300_UART
default 0xc8000000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
default 0xc8000003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
- default 0xd0000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX
+ default 0xd0000000 if DEBUG_SPEAR3XX
default 0xd0012000 if DEBUG_MVEBU_UART0
default 0xc81004c0 if DEBUG_MESON_UARTAO
default 0xd4017000 if DEBUG_MMP_UART2
default 0xd4018000 if DEBUG_MMP_UART3
- default 0xe0000000 if ARCH_SPEAR13XX
+ default 0xe0000000 if DEBUG_SPEAR13XX
default 0xe4007000 if DEBUG_HIP04_UART
default 0xe6c40000 if DEBUG_RMOBILE_SCIFA0
default 0xe6c50000 if DEBUG_RMOBILE_SCIFA1
default 0xf040ab00 if DEBUG_BRCMSTB_UART
default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE
default 0xf1012100 if DEBUG_MVEBU_UART1_ALTERNATE
- default 0xf1012000 if ARCH_DOVE || ARCH_MV78XX0 || \
- ARCH_ORION5X
default 0xf7fc9000 if DEBUG_BERLIN_UART
default 0xf8b00000 if DEBUG_HIX5HD2_UART
default 0xf991e000 if DEBUG_QCOM_UARTDM
default 0xfffb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
default 0xfffb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
default 0xfffb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
- default 0xfffe8600 if DEBUG_UART_BCM63XX
+ default 0xfffe8600 if DEBUG_BCM63XX_UART
default 0xfffff700 if ARCH_IOP33X
depends on ARCH_EP93XX || \
DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF2 || \
DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \
DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \
- DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \
+ DEBUG_S3C64XX_UART || \
+ DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \
DEBUG_AT91_UART
default 0xf0000be0 if ARCH_EBSA110
default 0xf0010000 if DEBUG_ASM9260_UART
default 0xf01fb000 if DEBUG_NOMADIK_UART
- default 0xf0201000 if DEBUG_BCM2835
+ default 0xf0201000 if DEBUG_BCM2835 || DEBUG_BCM2836
default 0xf1000300 if DEBUG_BCM_5301X
default 0xf1002000 if DEBUG_MT8127_UART0
default 0xf1006000 if DEBUG_MT6589_UART0
default 0xf1009000 if DEBUG_MT8135_UART3
- default 0xf11f1000 if ARCH_VERSATILE
- default 0xf1600000 if ARCH_INTEGRATOR
+ default 0xf11f1000 if DEBUG_VERSATILE
+ default 0xf1600000 if DEBUG_INTEGRATOR
default 0xf1c28000 if DEBUG_SUNXI_UART0
default 0xf1c28400 if DEBUG_SUNXI_UART1
default 0xf1f02800 if DEBUG_SUNXI_R_UART
+ default 0xf31004c0 if DEBUG_MESON_UARTAO
+ default 0xf4090000 if DEBUG_LPC32XX
+ default 0xf4200000 if DEBUG_GEMINI
default 0xf6200000 if DEBUG_PXA_UART1
- default 0xf4090000 if ARCH_LPC32XX
- default 0xf4200000 if ARCH_GEMINI
default 0xf7000000 if DEBUG_SUN9I_UART0
+ default 0xf7000000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0
default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
DEBUG_S3C2410_UART0)
+ default 0xf7000400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1
+ default 0xf7000800 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART2
+ default 0xf7000c00 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART3
default 0xf7004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
DEBUG_S3C2410_UART1)
default 0xf7008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
default 0xfc40ab00 if DEBUG_BRCMSTB_UART
default 0xfc705000 if DEBUG_ZTE_ZX
- default 0xfcfe8600 if DEBUG_UART_BCM63XX
- default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX
- default 0xfd000000 if ARCH_SPEAR13XX
- default 0xfd012000 if ARCH_MV78XX0
+ default 0xfcfe8600 if DEBUG_BCM63XX_UART
+ default 0xfd000000 if DEBUG_SPEAR3XX || DEBUG_SPEAR13XX
+ default 0xfd012000 if DEBUG_MVEBU_UART0_ALTERNATE && ARCH_MV78XX0
default 0xfd883000 if DEBUG_ALPINE_UART0
- default 0xfde12000 if ARCH_DOVE
- default 0xfe012000 if ARCH_ORION5X
- default 0xf31004c0 if DEBUG_MESON_UARTAO
+ default 0xfde12000 if DEBUG_MVEBU_UART0_ALTERNATE && ARCH_DOVE
+ default 0xfe012000 if DEBUG_MVEBU_UART0_ALTERNATE && ARCH_ORION5X
default 0xfe017000 if DEBUG_MMP_UART2
default 0xfe018000 if DEBUG_MMP_UART3
default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART
default 0xfeb31000 if DEBUG_KEYSTONE_UART1
default 0xfec02000 if DEBUG_SOCFPGA_UART0
default 0xfec02100 if DEBUG_SOCFPGA_UART1
- default 0xfec12000 if DEBUG_MVEBU_UART0 || DEBUG_MVEBU_UART0_ALTERNATE
+ default 0xfec12000 if (DEBUG_MVEBU_UART0 || DEBUG_MVEBU_UART0_ALTERNATE) && ARCH_MVEBU
default 0xfec12100 if DEBUG_MVEBU_UART1_ALTERNATE
default 0xfec10000 if DEBUG_SIRFATLAS7_UART0
default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0
default 0xfed60000 if DEBUG_RK29_UART0
default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
- default 0xfedc0000 if ARCH_EP93XX
- default 0xfee003f8 if FOOTBRIDGE
+ default 0xfedc0000 if DEBUG_EP93XX
+ default 0xfee003f8 if DEBUG_FOOTBRIDGE_COM1
default 0xfee20000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
default 0xfee82340 if ARCH_IOP13XX
default 0xfef00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
DEBUG_NETX_UART || \
DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
- DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \
+ DEBUG_S3C64XX_UART || \
+ DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0
config DEBUG_UART_8250_SHIFT
int "Register offset shift for the 8250 debug UART"
depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
- default 0 if FOOTBRIDGE || ARCH_IOP32X || DEBUG_BCM_5301X || \
+ default 0 if DEBUG_FOOTBRIDGE_COM1 || ARCH_IOP32X || DEBUG_BCM_5301X || \
DEBUG_OMAP7XXUART1 || DEBUG_OMAP7XXUART2 || DEBUG_OMAP7XXUART3
default 2
bool "Use 32-bit accesses for 8250 UART"
depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
depends on DEBUG_UART_8250_SHIFT >= 2
- default y if DEBUG_PICOXCELL_UART || DEBUG_SOCFPGA_UART0 || \
- DEBUG_SOCFPGA_UART1 || ARCH_KEYSTONE || \
+ default y if DEBUG_PICOXCELL_UART || \
+ DEBUG_SOCFPGA_UART0 || DEBUG_SOCFPGA_UART1 || \
+ DEBUG_KEYSTONE_UART0 || DEBUG_KEYSTONE_UART1 || \
DEBUG_ALPINE_UART0 || \
DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \
DEBUG_DAVINCI_DA8XX_UART2 || \
config DEBUG_UART_8250_FLOW_CONTROL
bool "Enable flow control for 8250 UART"
depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
- default y if ARCH_EBSA110 || FOOTBRIDGE || ARCH_GEMINI || ARCH_RPC
+ default y if ARCH_EBSA110 || DEBUG_FOOTBRIDGE_COM1 || DEBUG_GEMINI || ARCH_RPC
config DEBUG_UNCOMPRESS
bool
projects / deliverable / linux.git / blobdiff