/dts-v1/;
+#include "orion5x-linkstation.dtsi"
+#include "mvebu-linkstation-gpio-simple.dtsi"
+#include "mvebu-linkstation-fan.dtsi"
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "orion5x-mv88f5182.dtsi"
/ {
model = "Buffalo Linkstation LS-WTGL";
reg = <0x00000000 0x4000000>;
};
- chosen {
- bootargs = "console=ttyS0,115200n8 earlyprintk";
- linux,stdout-path = &uart0;
- };
-
- soc {
- ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
- <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
- <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x40000>;
-
- internal-regs {
- pinctrl: pinctrl@10000 {
- pinctrl-names = "default";
-
- pmx_led_power: pmx-leds {
- marvell,pins = "mpp0";
- marvell,function = "gpio";
- };
-
- pmx_led_alarm: pmx-leds {
- marvell,pins = "mpp2";
- marvell,function = "gpio";
- };
-
- pmx_led_info: pmx-leds {
- marvell,pins = "mpp3";
- marvell,function = "gpio";
- };
-
- pmx_power_hdd: pmx-power-hdd {
- marvell,pins = "mpp1";
- marvell,function = "gpio";
- };
-
- pmx_usb_power: pmx-usb-power {
- marvell,pins = "mpp9";
- marvell,function = "gpio";
- };
-
- pmx_sata0: pmx-sata0 {
- marvell,pins = "mpp12";
- marvell,function = "sata0";
- };
-
- pmx_sata1: pmx-sata1 {
- marvell,pins = "mpp13";
- marvell,function = "sata1";
- };
-
- pmx_fan_high: pmx-fan-high {
- marvell,pins = "mpp14";
- marvell,function = "gpio";
- };
-
- pmx_fan_low: pmx-fan-low {
- marvell,pins = "mpp17";
- marvell,function = "gpio";
- };
-
- pmx_fan_lock: pmx-fan-lock {
- marvell,pins = "mpp6";
- marvell,function = "gpio";
- };
-
- pmx_power_switch: pmx-power-switch {
- marvell,pins = "mpp8", "mpp10";
- marvell,function = "gpio";
- };
- };
- };
- };
-
gpio_keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = <&pmx_power_switch>;
- pinctrl-names = "default";
-
- button@1 {
- label = "Power-on Switch";
- linux,code = <KEY_RESERVED>;
- linux,input-type = <5>;
+ power-on-switch {
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
};
- button@2 {
- label = "Power-auto Switch";
- linux,code = <KEY_ESC>;
- linux,input-type = <5>;
+ power-auto-switch {
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
};
};
gpio_leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&pmx_led_power &pmx_led_alarm
- &pmx_led_info>;
- pinctrl-names = "default";
-
- led@1 {
- label = "lswtgl:blue:power";
+ blue-power-led {
gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- default-state = "keep";
};
- led@2 {
- label = "lswtgl:red:alarm";
+ red-alarm-led {
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
};
- led@3 {
- label = "lswtgl:amber:info";
+ amber-info-led {
gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
};
};
gpio_fan {
- compatible = "gpio-fan";
- pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
- pinctrl-names = "default";
-
gpios = <&gpio0 14 GPIO_ACTIVE_LOW
&gpio0 17 GPIO_ACTIVE_LOW>;
- gpio-fan,speed-map = <0 3
- 1500 2
- 3250 1
- 5000 0>;
-
alarm-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
};
+};
- restart_poweroff {
- compatible = "restart-poweroff";
+&pinctrl {
+ pmx_led_power: pmx-leds {
+ marvell,pins = "mpp0";
+ marvell,function = "gpio";
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = <&pmx_power_hdd &pmx_usb_power>;
- pinctrl-names = "default";
-
- usb_power: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "USB Power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
- };
-
- hdd_power: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "HDD Power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
- };
+ pmx_power_hdd: pmx-power-hdd {
+ marvell,pins = "mpp1";
+ marvell,function = "gpio";
};
-};
-
-&devbus_bootcs {
- status = "okay";
- devbus,keep-config;
- flash@0 {
- compatible = "jedec-flash";
- reg = <0 0x40000>;
- bank-width = <1>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- header@0 {
- reg = <0 0x30000>;
- read-only;
- };
-
- uboot@30000 {
- reg = <0x30000 0xF000>;
- read-only;
- };
+ pmx_led_alarm: pmx-leds {
+ marvell,pins = "mpp2";
+ marvell,function = "gpio";
+ };
- uboot_env@3F000 {
- reg = <0x3F000 0x1000>;
- };
- };
+ pmx_led_info: pmx-leds {
+ marvell,pins = "mpp3";
+ marvell,function = "gpio";
};
-};
-&mdio {
- status = "okay";
+ pmx_fan_lock: pmx-fan-lock {
+ marvell,pins = "mpp6";
+ marvell,function = "gpio";
+ };
- ethphy: ethernet-phy {
- reg = <8>;
+ pmx_power_switch: pmx-power-switch {
+ marvell,pins = "mpp8", "mpp10";
+ marvell,function = "gpio";
};
-};
-ð {
- status = "okay";
+ pmx_power_usb: pmx-power-usb {
+ marvell,pins = "mpp9";
+ marvell,function = "gpio";
+ };
- ethernet-port@0 {
- phy-handle = <ðphy>;
+ pmx_fan_high: pmx-fan-high {
+ marvell,pins = "mpp14";
+ marvell,function = "gpio";
};
-};
-&ehci0 {
- status = "okay";
+ pmx_fan_low: pmx-fan-low {
+ marvell,pins = "mpp17";
+ marvell,function = "gpio";
+ };
};
-&i2c {
- status = "okay";
-
- rtc {
- compatible = "ricoh,rs5c372a";
- reg = <0x32>;
- };
+&hdd_power {
+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
};
-&wdt {
- status = "disabled";
+&usb_power {
+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
};
&sata {
- pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
- pinctrl-names = "default";
- status = "okay";
nr-ports = <2>;
};
-
-&uart0 {
- status = "okay";
-};
projects / deliverable / linux.git / blobdiff