ARM: dts: STi: STih407: Switch LPC mode from RTC to Clocksource

[deliverable/linux.git] / arch / arm / boot / dts / rk3036-kylin.dts

diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts
index 6b4ffc3cd5904c4a83b99a506937a80aa0d2c1cb..6251d109eff42de9cc5c8ec1784a003fe1eab1c0 100644 (file)
--- a/arch/arm/boot/dts/rk3036-kylin.dts
+++ b/arch/arm/boot/dts/rk3036-kylin.dts
@@ -46,6 +46,58 @@
        model = "Rockchip RK3036 KylinBoard";
        compatible = "rockchip,rk3036-kylin", "rockchip,rk3036";
 
+       leds: gpio-leds {
+               compatible = "gpio-leds";
+
+               work {
+                       gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+                       label = "kylin:red:led";
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&led_ctl>;
+               };
+       };
+
+       sdio_pwrseq: sdio-pwrseq {
+               compatible = "mmc-pwrseq-simple";
+               pinctrl-names = "default";
+               pinctrl-0 = <&bt_wake_h>;
+
+               /*
+                * On the module itself this is one of these (depending
+                * on the actual card populated):
+                * - SDIO_RESET_L_WL_REG_ON
+                * - SDIO_RESET_L_WL_RST
+                * - SDIO_RESET_L_BT_EN
+                */
+               reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>, /* WL_REG_ON */
+                             <&gpio0 27 GPIO_ACTIVE_LOW>, /* WL_RST */
+                             <&gpio2 9  GPIO_ACTIVE_LOW>; /* BT_EN */
+       };
+
+       sound {
+               compatible = "simple-audio-card";
+               simple-audio-card,format = "i2s";
+               simple-audio-card,name = "rockchip,rt5616-codec";
+               simple-audio-card,mclk-fs = <512>;
+               simple-audio-card,widgets =
+                       "Microphone", "Microphone Jack",
+                       "Headphone", "Headphone Jack";
+               simple-audio-card,routing =
+                       "MIC1", "Microphone Jack",
+                       "MIC2", "Microphone Jack",
+                       "Microphone Jack", "micbias1",
+                       "Headphone Jack", "HPOL",
+                       "Headphone Jack", "HPOR";
+
+               simple-audio-card,cpu {
+                       sound-dai = <&i2s>;
+               };
+
+               simple-audio-card,codec {
+                       sound-dai = <&rt5616>;
+               };
+       };
+
        vcc_sys: vsys-regulator {
                compatible = "regulator-fixed";
                regulator-name = "vcc_sys";
@@ -271,6 +323,19 @@
 
 &i2c2 {
        status = "okay";
+
+       rt5616: rt5616@1b {
+               compatible = "rt5616";
+               reg = <0x1b>;
+               clocks = <&cru SCLK_I2S_OUT>;
+               clock-names = "mclk";
+               #sound-dai-cells = <0>;
+       };
+};
+
+&i2s {
+       #sound-dai-cells = <0>;
+       status = "okay";
 };
 
 &sdio {
@@ -278,13 +343,34 @@
 
        broken-cd;
        bus-width = <4>;
+       cap-sd-highspeed;
        cap-sdio-irq;
        default-sample-phase = <90>;
        keep-power-in-suspend;
+       mmc-pwrseq = <&sdio_pwrseq>;
        non-removable;
        num-slots = <1>;
        pinctrl-names = "default";
        pinctrl-0 = <&sdio_clk &sdio_cmd &sdio_bus4>;
+       sd-uhs-sdr12;
+       sd-uhs-sdr25;
+       sd-uhs-sdr50;
+       sd-uhs-sdr104;
+};
+
+&sdmmc {
+       bus-width = <4>;
+       cap-mmc-highspeed;
+       cap-sd-highspeed;
+       card-detect-delay = <200>;
+       disable-wp;
+       num-slots = <1>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
+};
+
+&uart0 {
+       status = "okay";
 };
 
 &uart2 {
@@ -300,12 +386,30 @@
 };
 
 &pinctrl {
+       leds {
+               led_ctl: led-ctl {
+                       rockchip,pins = <2 30 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+       };
+
        pmic {
                pmic_int: pmic-int {
                        rockchip,pins = <2 2 RK_FUNC_GPIO &pcfg_pull_default>;
                };
        };
 
+       sdio {
+               bt_wake_h: bt-wake-h {
+                       rockchip,pins = <2 8 RK_FUNC_GPIO &pcfg_pull_default>;
+               };
+       };
+
+       sdmmc {
+               sdmmc_pwr: sdmmc-pwr {
+                       rockchip,pins = <2 28 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+       };
+
        sleep {
                global_pwroff: global-pwroff {
                        rockchip,pins = <2 7 RK_FUNC_1 &pcfg_pull_none>;